Used Wagner Hc 970 for sale (96)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: F-00334, controller manufacturer: Siemens, controller model: SINUMERIK 802C, MACHINE DETAILS Control brand: SIEMENS Control model: SINUMERIK 802C Gjdox D T A Dopfx Ag Dskf

Condition: used, Weinig / Wagner one-handed hydraulic grease gun with manometer for hydraulic clamps. Gksdpfexu H Tdjx Ag Dof Manufacturer Part No.: 00309102

Condition: used, length 1200 mm width 500 mm floor-plate height 105 mm weight of the machine ca. 400 kg Electric magnetic plate from WAGNER, a transformer is required for operation / Godpstq I Rqofx Ag Djkf Rectifier required. 110 volts, 2.86 amps. Reduced special price. Machine dealer with own stock of 1600 m².

Year of construction: 2011, condition: ready for operation (used), General Data Machine weight 7300 kg Measurements height 3245 mm Dimensions Machine Length 3080 mm Main Drive Spindle motor power 5.5 kW This WAGNER PRC 60 was manufactured in 2011. It features a drilling capacity in steel of 60 mm, a table size of 630 × 800 mm, and a spindle taper of MK 5. The machine includes a spindle travel of 400 mm and a reach of 400 – 2000 mm. With a column diameter of 450 mm and a vertical arm adjustment of 800 mm, it's robust and versatile. Contact us for more information about this machine. Gkjdpfx Agjx D Ilao Dof Application Types Other Machine Tools

Year of construction: 1980, condition: good (used), Movable clamping table make WAGNER type: FE4000 year 1980 Travel : 4 000 mm table surface : 4000 mm X 1400 mm Gjdpfx Ajg Uf I Aeg Dskf Feed rate : 8 - 2500 mm/min Rapid traverse : 4 m/min load capacity. Max : 12 500 kg Weight : approx. 12 000 kg In good condition. Hydr.clamping and worm drive

Condition: good (used), Year of construction: 2009, WAGNER/TRENNJÄGER PMC 12 S Plate Circular Saw Gkedpfsx E S A Iex Ag Dof Year of manufacture: 2009 Machine number: 200 Equipment: Round material up to 360 mm Square stock 300 mm x 300 mm Section 1,000 mm x 150 mm For further data, see brochure Additional: 2nd saw blade, diameter 910 mm Included in delivery: Operating manual/documentation Equipment, operation, transport, machine overview & manufacturer’s brochure – see PDF. Illustration, content, and details are non-binding and subject to change. All other accessories visible in the photos and video are not included in the scope of delivery and are therefore not part of this sale. Only the accessories expressly listed here, in the order confirmation and invoice, are included in the scope of delivery. FCA (Free Carrier Loaded Truck) D-04643 Geithain Packaging only Delivery time: immediate Subject to prior sale / Payment due immediately upon conclusion of sale.

Condition: new, Year of construction: 2023, There are 3 Sets of Coating System subjected to this listing; Details; 1- 2023 Wagner liquid coating system consist of; -2 pcs Isolate paint supply set Each consisting of: 1- 1 pc Isolated table approx. dimensions 3200x1000x1900 h. mm. • Standard grounding system • 2 Electric locks, one for paint supply access door and one for the spray booth access door complete with electric wiring • Lamp red / green for electrostatic on / off status 2- 3 pcs Wagner Pneumatic elevator for 25l drum covers complete with: stainless steel cover with inspection hole and suction pipe pneumatic agitator rotation block when in high position 3- 4 pcs Wagner double diaphragm pump, mod. DD10 (4 for paint and 1 for water) pressure ratio 1:1, complete with: pressure regulator and gauge for the motor feeding air fluid filter group suction hose for 25 l drum cover (for paint) suction hose for 25 lt drums (for cleaning water) 4- 1 pc flusching pressure tank for CUP BELL Gkodpfx Agoxcnk Te Dsf -2 pcs Reciprocator mod. VU 1-2700mm stroke • High stability: solid mechanical construction with light weight, but robust • design thanks to the aluminum sections and an high precision linear • guide with cage for wheels. • Sturdy: can handle up to 49kg • High safety: completely suitable for use in explosive areas EX II 3G • Simple and intuitive maintenance of the toothed belt which guarantees a • long service life • Powerful: stroke speeds from 7 up to 80m/min and • acceleration up to 6m/s • stroke speed variantion along the stroke • Electric Motor protection cover • Sliding base 600mm with electric engine to move automatically back and forth the reciprocator • Isolated mounting brackets • High stability: solid mechanical construction with light weight, but robust • design thanks to the aluminum sections and an high precision linear • guide with cage for wheels. • Sturdy: can handle up to 49kg • High safety: completely suitable for use in explosive areas EX II 3G • Simple and intuitive maintenance of the toothed belt which guarantees a • long service life • Powerful: stroke speeds from 7 up to 80m/min and 2- 2023 Wagner Projekt Powder Supercube System -Booth Supercube with 2 slot eachside In sandwich PVC- Length 2.500 -Powder Suction and Seperation Cyclone and Filter 17.000 mc/h (16.000 + 1.000) -Powder Centre SUPERCUBE EVO with IP Pump with Container Ultra siewe included + extra container without siewe -Application Technology PROFITech With N*12 PEA-C4 XL automatic guns N*16 automatic guns PEA-C4 XL (8 on reciprocator1 + 8 on reciprocator2) Movement N*2 moving reciprocators with motorised moving bases. -N*2 electronic reciprocators with fences -N*2 electronic fast mobile bases for scanning pieces -N*1 Vertical and Horizontal Scanner reading system of pieces N*1 encoder for connecting conveyor to Touch panel N*1 Software 4.0 Data production with data management Powder Consumption Colour Change Time Stop Production counter -Two external platforms (2 x manuel PEMX1 guns) For more details please get in contact ...

Condition: good (used), Year of construction: 2016, machine/vehicle number: 24-16-0009, Offer 25391 Technical Data: - Automatic cutting cycle, hydraulic lifting/lowering of the saw frame - Manual miter adjustment with manual clamping - Saw blade dimensions: 6040 x 41 x 1.3 mm - Cutting speed, steplessly adjustable: 20 – 90 m/min - Cutting pressure regulation, stepless: 10 – 15 bar - Lowering speed: 0 – 300 mm/min - Cutting range: 30° – 90° - at 90° round: 500 mm - rectangular/flat: 620 x 450 mm - at 45° round: 450 mm - square: 430 x 430 mm - at 30° square: 310 x 310 mm - Hydraulic material clamping - Coolant system - Discharge roller conveyor with length stop, 4000 mm - Infeed roller conveyor: 4000 mm - Drive: 400 V / 4 kW - Required space approx. W 1700 x H 1700 x D 3000 mm - Weight approx. 1600 kg Gksdpox Eku Njfx Ag Djf

Condition: used, Year of construction: 1986, total height: 1,900 mm, total length: 2,300 mm, total width: 2,200 mm, Empty weight: 2.000 kg - Year: 1986 - Documentation available: No - CE certificate present: No - Serial number: 86721 - Drive system: Conventional - Power [kW]: 1.5 - X-axis travel [mm]: 700 - Y-axis travel [mm]: 400 - Z-axis travel [mm]: 400 - Table width [mm]: 900 - Table depth [mm]: 350 - Magnet width [mm]: 350 - Magnet depth [mm]: 700 - Max. grinding wheel diameter [mm]: 250 - Control: Conventional - Motor power: 1.5kW - Travel Z: 400mm - Model: kslijper - Travel X: 700mm - Grinding diameter: 250mm Gjdpew E If Esfx Ag Dekf - Travel Y: 400mm - Table length: 900mm - Magnet size: 350mm - Table width: 350mm - Transport dimensions: 2300mm x 2200mm x 1900mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2021, General Data Measurements width 1700 mm Measurements height 2240 mm Machine weight 3500 kg Measurements depth 2100 mm Control Unit Brand SIEMENS Model SINUMERIK 828D Main Drive Spindle speed range 80 – 10000 rpm Tool taper SK 40 Movement X-Axis Movement 600 mm X-Axis Feed Force 10000 mm/min X-Axis Rapid Traverse 24000 mm/min Y-Axis Movement 400 mm Y-Axis Feed Force 10000 mm/min Y-Axis Rapid Traverse 24000 mm/min Z-Axis Movement 450 mm Z-Axis Feed Force 10000 mm/min Gkedpfx Asx D Nu Nog Djf Z-Axis Rapid Traverse 20000 mm/min Additional Equipment Rigid cast-iron frame construction Linear guides on all three axes Automatic double-arm tool changer (16 stations) Complete coolant system Central automatic lubrication Air blast system for spindle cleaning Machine enclosure with doors Machine and signal lights Documentation in English CE-certified This 3-axis WAGNER WMC 600 L was manufactured in 2021, featuring a robust cast-iron frame and linear guides on all axes. It includes a Siemens 828 Basic ShopMill, an automatic double-arm tool changer with 16 stations, and a complete coolant system. The spindle supports speeds up to 10,000 rpm with a power of 11 kW. If you are looking to get high-quality milling capabilities consider the WAGNER WMC 600 L machine we have for sale. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, turning diameter over cross slide: 610 mm, turning length: 2,000 mm, spindle bore: 100 mm, travel distance X-axis: 310 mm, Equipment: documentation/manual, In good condition. Equipped with steadies. Spindle bore 100 mm. Machining diameter up to 610 mm, length up to 2000 mm. Siemens control. Features TurnPlus. Max. turning diameter: 546 mm Max. turning diameter over bed: 610 mm Distance between centers: 2000 mm CNC type: X-axis: 310 mm Z-axis: 2000 mm Spindle taper: Gksdpfx Asx Dhkveg Dof Spindle bore: 106 mm Spindle speed: 1800 rpm Spindle motor power: 15 kW Tailstock: yes Bar feeder: no ----- Length x width x height: 4500.0 × 1620.0 × 1950.0 mm Weight: 4540 kg Technical condition: as is

Condition: used, Year of construction: 1980, functionality: limited functionality, WAGNER MECHANICAL ECCENTRIC PRESS — 500 TON — DOUBLE COLUMN Brand: Wagner Model: 500 ton Eccentric Press Year: 1980 Mechanical overhaul: 2010 Electrical panel: overhauled in 2011 Condition: partially operational Type: double column – eccentric system Strokes/min: 0–30 Slide stroke: 300 mm Slide adjustment: 140 mm Clearance at TDC: 1100 mm Front column opening: 1850 mm Side window: 800 mm Bolster: 1800 × 1000 mm Ram: 1800 × 1000 mm Number of pressure points: 2 Ram guides: 8 Guards: front and rear Machine dimensions: 3000 × 2000 × 6000 mm Weight: 50 tons Foundation required: 100 cm Accessories: ELMEA L500 power supply feeder Status: available for inspection Gsdpox A Akzsfx Ag Dskf

Condition: excellent (used), Year of construction: 2020, Pneumatic Double Diaphragm Pump Cobra 40-10 Top condition – Year of manufacture: 2020 Its unique design enables low-pulsation operation. Consistent paint flow for a perfect spray pattern and highest surface quality. Ideally suited for processing shear-sensitive and moisture-sensitive materials. Minimal shear forces – ideal for processing, e.g., UV coatings. Ideal for handling small material volumes and frequent color changes. Scope of delivery: Basic unit on frame, HD double hose 7.5 m, upper container 5 l Ex, AirCoat spray gun AC 4600 Professional including red air cap and holder, AirCoat nozzle ACF 3000 11/40. Technical Data: Ratio: 40:1 Displacement per double stroke: 10 cm³ Flow rate at 200 double strokes: 2 l/min Max. operating pressure: 250 bar Weight: 23 kg Location: 54634 Bitburg Gksdoxdtkuopfx Ag Dof Extremely low hours of use –

Condition: good (used), Year of construction: 2017, machine/vehicle number: N 16601, Offer 25387 Technical Data: Gkodox Ei D Aopfx Ag Def - Drilling capacity in steel: 60 mm - Drill spindle taper: MT 5 - Drill spindle stroke: 300 mm - Digital positioning display for stroke and position - Radius (throat): 1600 mm - Column diameter: 350 mm - Max. distance spindle – base plate: 350 – 1650 mm - Vertical travel of the arm: 1250 mm - Spindle speeds, stepless: 30 – 1500 rpm - Feeds, stepless: 1 – 600 mm/rev - Drive: 400 V / 8.9 kVA - 2 x cube tables - Coolant system - Required floor space approx.: W 2490 x H 2980 x D 1060 mm - Weight approx.: 3800 kg

Condition: used, Year of construction: 2008, total height: 2,750 mm, total length: 2,900 mm, total width: 2,400 mm, Empty weight: 8.500 kg Price: On request - Year: 2008 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: MB116360 - Drive system: CNC - Horizontal/vertical: vertical - Control system brand: Siemens - Number of axes [pcs]: 3 - X-axis travel [mm]: 1100 - Y-axis travel [mm]: 650 - Z-axis travel [mm]: 600 - Table length [mm]: 1300 - Table width [mm]: 650 - Tool holder: SK40 - Max. spindle speed [rpm]: 8000 - Options: Chip collection tray, Chip conveyor, External cooling, Tool magazine, Machine-vice - └ Tool magazine [pcs.]: 24 Gkedpfxoxta Nij Ag Def - Transport dimensions: 2900mm x 2400mm x 2750mm (l x w x h) - Transport weight [kg]: 8500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2002, condition: ready for operation (used), General Data Measurements height 2200 mm Main Drive Spindle Speed 1200 RPM Spindle motor power 9 kW Control Unit Brand SIEMENS Dimensions Machine Length 4660 mm Gkodpfxox D Dpne Ag Def This WAGNER FCL 3280 was manufactured in 2002. It features a spindle bore of 134 mm and a spindle speed range up to 1200 rpm. The machine supports a maximum workpiece weight of 1800 kg with tailstock and steady rest. It offers rapid traverse rates of 10,000 mm/min for both Z and X axes. If you are looking to get high-quality turning capabilities, consider the WAGNER FCL 3280 machine we have for sale. Contact us for more information. Application Types Turning

Condition: good (used), functionality: fully functional, 2x Powder supply units (Manufacturer: Wagner) 2x Powder control units & spray guns (Manufacturer: Wagner) 1x Curing oven 1x Complete overhead rail system General information about the powder coating plant: 2x Powder supply units (Manufacturer: Wagner): without powder recovery, resulting in short changeover times Curing oven: Oven dimensions (internal): Length: 6500 mm Width: 2400 mm Height: 1400 mm Maximum component weight: 750 kg Retrofitted to forced-air gas burner (approx. 85kW/h) Rail system: The system was completely renewed in 2013 Load per suspension point: 200 kg Load per suspension traverse: 400 kg Gkjdpfexhcx Aox Ag Def Corresponding technical drawing available

Condition: excellent (used), functionality: fully functional, Complete equipment for an industrial paint shop: - dry wall with extraction system and filters. The paint shop was used for painting window frames. Gjdjxmr Tyepfx Ag Djkf

Condition: new, Year of construction: 2025, Pneumatic double diaphragm pump Cobra 40 -10 Its unique design allows low pulsation operation Uniform ink flow for perfect spray and highest surface quality Gksdpfebuqn Hox Ag Def Ideal for processing shear and moisture sensitive materials Minimal shear forces - ideal for processing e.g. UV varnishes Ideal for processing small quantities of material and for frequent colour changes Scope of delivery: Basic unit on stand, HD double hose 7,5m, upper container 5l Ex, AirCoat gun AC 4600 Professional including red air cap and holder, Air Coat nozzle ACF 3000 11/40 Technical data: Conversion ratio: 40:1 Volume flow per double stroke: 10 cm3 Flow rate at 200 double strokes: 2 l/min max. Operating pressure: 250 bar Weight: 23 kg Location: 54634 Bitburg At a special price - immediately available

Year of construction: 1989, condition: used, Axis 3 serial number 84095 tool taper BT40 toll turrets 12 Gsdpewhqz Usfx Ag Dekf table surface area 1300 x 400 mm no. of flutes 3 T-Nuten T-slot - width 18 mm control FANUC dimensions ca. 3000 x 2500 x 2500 mm

Year of construction: 2021, condition: ready for operation (used), General Data Gkjdpfx Ajx D Nuvsg Dsf Measurements width 1600 mm Measurements depth 3400 mm Measurements height 2100 mm Machine weight 5000 kg Control Unit Brand SIEMENS Model SINUMERIK 8287D Main Drive Spindle speed range 20 – 2200 Spindle motor power 15 kW Spindle bore 81 mm Number of axis 2 Movement X-Axis Movement 280 mm Z-Axis Movement 1435 mm Workpiece Workpiece drm over bed 500 mm Workpiece drm over support 260 mm Tail Stock Pinol diameter 75 mm Pinol tool taper MK 5 This Wagner WDE 500 PLUS was manufactured in 2021. It features a max turning diameter over bed of 500 mm and a spindle speed range up to 2200 rpm. Equipped with Siemens 828 B-T control for enhanced precision and a spindle motor power of 15 kW. Ideal for robust turning operations. Machine dimensions are 3400 × 1600 × 2100 mm, weighing approximately 5000 kg. For more information about this machine, please reach out to us. Application Types Turning

Condition: used, Year of construction: 1999, band width 221 mm length in total 1.000 mm weight of the machine ca. 300 kg Godpfswf Et Hjx Ag Dokf +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: ready for operation (used), Year of construction: 2007, Control Unit Brand SIEMENS Gkedpfx Asx D Elwog Def Model Sinumerik Movement X-Axis Movement 1400 mm Z-Axis Movement 600 mm Y-Axis Movement 700 mm This 4-axis WAGNER VMC 1400 was manufactured in 2007. It features a spindle power of 28 kW, maximum spindle torque of 230 Nm, and a spindle speed up to 4000 rpm. It includes a 4th axis for machining workpieces up to 1100 mm. Ideal for complex machining tasks. Contact us for more information about this machine. Application Types Milling

Year of construction: 2007, condition: ready for operation (used), General Data Measurements width 1470 mm Measurements depth 3230 mm Measurements height 1730 mm Machine weight 3000 kg Gkedpfxox D Rfie Ag Dsf Control Unit Brand SIEMENS Model SINUMERIK 802Ç Main Drive Spindle motor power 7.5 kW Number of axis 2 Movement X-Axis Movement 295 Z-Axis Movement 1435 This WAGNER WDE 500 was manufactured in 2007. A robust horizontal turning machine, it offers reliable performance for various machining tasks. Consider the opportunity to buy this WAGNER WDE 500 horizontal turning machine. Contact us for more information. Application Types Turning

Year of construction: 2012, condition: ready for operation (used), Control Unit Brand SIEMENS Model 802-C Main Drive Number of axis 2 Additional Equipment Complete electrical equipment 400 V / 50 Hz RS 232 interface Electronic handwheels with increment preselection Mechanical spindle engagement lever Right and left rotation Pilot lever for feed with detent function Rapid traverse override as a push button Movable control panel Constant cutting speed Bed guideways induction-hardened, ground, and Turcite-coated Gksdjx D Snxopfx Ag Def This WAGNER WDE 500 was manufactured in 2012. A robust horizontal turning machine featuring a Siemens 802-C control interface, it includes a three-jaw lathe chuck, quick-change tool post, and manual tailstock. The machine is equipped with a complete coolant system and an enclosure with safety features. If you are looking to get high-quality turning capabilities consider the WAGNER WDE 500 machine we have for sale. Contact us for more information. Application Types Turning