Used Denso Robot for sale (2,505)

Condition: ready for operation (used), Year of construction: 2018, This DENSO RC8A was manufactured in 2018. It features a robotic cell with two SCARA robots, each capable of a maximum reach of 550 mm and a Z-axis stroke of 320 mm. The system includes a controller RC8A, offline programming software, and self-diagnostic functions. Ideal for applications requiring high-speed robotic manipulation. Contact us for more information about this machine. • Motion & Control: • Point-to-point control system • Linear and circular movement in 3 dimensions • Memory Capacity: • Variables memory: 1.75 MB (approx. 65000 points) • Program memory: 400 MB • Up to 256 programs • 5000 instructions per program • I/O Signals: • Inputs: • 8 user inputs at robot wrist (Hand I/O) • 8 user inputs at controller (Mini I/O) • 8 system inputs • Outputs: • 8 user outputs at robot wrist (Hand I/O) • 7 user outputs at controller (Mini I/O) • 8 system outputs • Communication Interfaces: • 1 × RS-232C • Gigabit Ethernet • 2 × USB • Additional Features: • Self-diagnostic functions • Operating conditions: • Temperature: 0–40 °C • Humidity: ≤ 90% RH • Controller Dimensions & Weight: • Standard RC8A: 357 × 320 × 94 mm • RC8A with Safety Motion: 411 × 320 × 94 mm • Volume: 12.4 liters • Weight: 12 kg • Cables: • Power cable: 5 m • I/O cable: 8 m (optional) • Teaching Pendant: • Quantity: 1 unit (for both robots) • Cable length: 4 m (optional 8 m / 12 m) • Display: • 7.5" TFT LCD touchscreen • Resolution: 640 × 480 pixels • Power supply: 24 V • Protection class: IP65 (dust & splash resistant) • Dimensions: 290 × 198 × 80 mm • Weight: approx. 1 kg • Functions: • Program creation and editing • Parameter configuration • Robot jogging and motion control • Program start • Teaching and verification mode • I/O management • Communication setup • Error displayRobots • Quantity: 2 units • Type: SCARA • Mechanical Characteristics: • Maximum reach: 550 mm • Z-axis stroke: 320 mm • Repeatability (J1 + J2): ±0.012 mm • Repeatability (Z-axis): ±0.01 mm • Repeatability (T-axis): ±0.004° • Payload capacity (wrist): 8 kgSpeed • Maximum composite speed: 8780 mm/sec • Z-axis speed: 2760 mm/sec • T-axis speed: 220°/secRobot Arm Connections • Pneumatic connections: • 4 air tubes, Ø 6 mm • Electrical signals: • 24 signals via connectorRobot Features • Offline programming software • Absolute encoders • Sealed AC servo motors, brushless and maintenance-free Hedsx Uty Hspfx Ahvefd • Power supply: Single-phase or three-phase 230 VAdditional Equipment • 2 gripping devices with sensors for detecting picked quantity • 1 electrical control cabinet interfacing the entire systemMachine History • Functional Description: The robotic cell was originally designed to feed a cutlery packaging machine. The system picked stacked forks from dedicated crates and transferred them onto a packaging conveyor at a loading speed of 100 pieces per minute. While the two SCARA robots were operating correctly, the crate exchange system (empty vs. full crates) was not optimally designed. For this reason, the robotic cell was eventually decommissioned. A short video of the robot in operation is available.

Condition: excellent (used), functionality: fully functional, fuel type: electric, overall weight: 1,000 kg, operation weight: 575 kg, lifting height: 3,600 mm, Lifter, manipulator for glass, windows, plates Smartlift lifting capacity 575kg remote control - electric drive - side shift - control from a remote control on a cable - pressure indicators - 24V power supply (two batteries) - rough terrain trolley - max lifting capacity 575kg - range in the photo - one electric extension - fully working / video on whatsapp - electric rotation Hfsdpsxndqtefx Ahvsd The machine is located in Poland - 33350. On-site inspection is available by appointment. Our company is located 120 km from Krakow Airport (KRK). transport possible External length 1,880 mm External width 890 mm Dependent weight 1,025 / 1,300 kg Max. lifting capacity 575 kg Max. load at maximum extension 275 kg Minimum extension (center of drive wheel to suction plates) 700 mm Max. extension (center of drive wheel to suction plates) 1,800 mm Max. height to center of lifting bracket 3,600 mm Lateral offset 100 mm Fine lifting function in the tower 200 mm Swivel 180 degrees Hydraulic rotation 180 degrees Suction plates 4 x Ø 350 mm Batteries

Condition: ready for operation (used), Fanuc 6-assige robotfreescentrum voor aluminium en staal X-beweging van de robot: 10.500 mm Verlengd bereik van de robotarm (links en rechts): 3045 mm maximale werkstuklengte indien het een profiel betreft: 15 meter max. werkstukgrootte zonder verlengde armbereik: 10.500 x 3045 mm max. werkstukhoogte: 3500 mm 13-positie gereedschapswisselaar: - 12 elektrische gereedschappen Hjdpfov Sfk Hjx Ahvofd - 1 meetsonde Freeskop: -SK40 - 10 kW op spindel 12.000 tpm / 15.000 tpm - 7,5 kW op spindel / 18 000 tpm - 4 kW op spindel / 24.000 tpm - automatische smering Er zijn veel configuraties mogelijk, afhankelijk van het type werkstuk. Momenteel zijn er twee aparte werkgebieden, maar u kunt dit wijzigen naar één werkgebied (voor een groot werkstuk) of het opsplitsen in meerdere aparte werkgebieden voor kleinere werkstukken.

Condition: used, Used Robot Coupe Model R30 high intensity/universal mixer cutter. Stainless steel easy removable mixing bowl has total capacity 30 litre, working capacity approx. 20 litre, measures 360 mm diameter x 290 mm depth. Has bottom (3) S-blade type of chopper agitator driven via dual speed el. motor 4,1/5,0 kW, 1500/3000 rpm, 50 Hz, 400 V. The vessel has top plastic cover. Swinging type of discharge. Integrated el. switchboard with local control panel. Overal dimensions: 600x720x1250 mm (height), 130 kg gross weight. Specifications: Power: 4.1 kW Weight: Actual: Kg130.0 Hfodpfx Asyma D Uohvsd

Condition: excellent (used), functionality: fully functional, machine/vehicle number: E3360111111, REF: MM6276 1 x Robot Coupe high-speed cutter / emulsifier. Ideal for procssing 20-100 portions, this machine is designed for the preparation of texture modified meals. All foods, whether raw or cooked, sweet or savoury, whether entrees or mains, dessert or cheese, can be processed to various texture levels. Supplied with Blixer Arm and Serrated blade. Technical specification ⚙️ ✅ Model - Blixer 30 5400W. Hfjdpoxq Eppsfx Ahved ✅ Serial number - E336011111. ✅ Timer function - 0-15 minutes. ✅ Input voltage - 400 V / 50 hz / 3 phase. ✅ Power - 5.4 kW / 11.6 Amps.

Condition: ready for operation (used), Year of construction: 2016, load capacity: 1,400 kg, Glaslift KS Robot 1400 Hodpfx Aoyir Azohvsfd Year of manufacture: 2016 Width: 1310 mm Length: 3350 mm Height: 1700 mm Max. lifting capacity: 1400 kg With radio remote control DGUV inspection valid until July 2025 This offer is exclusively intended for commercial customers as defined by §14 BGB.

Condition: good (used), BACCI DOUBLE JET The BACCI DOUBLE JET machine with a KUKA robot is an advanced, automated CNC machining center dedicated to the production of wood and wood-based components. The KUKA robot works with the machine's integrated feeder to automatically feed material for processing, significantly increasing efficiency and minimizing the need for manual operation. After the milling and grinding process is complete, the robot automatically retrieves finished parts and places them on pallets, streamlining production logistics and enabling continuous operation without interruptions for manual reloading. This system ensures seamless integration of the robot with the BACCI DOUBLE JET machine, which features dual machining heads and 12 interpolated axes, enabling simultaneous and precise machining of components. Automated material loading and unloading and the integrated feeder system increase efficiency and production repeatability while reducing labor costs and improving operator safety. This machine is primarily used in the furniture and carpentry industries, where high standards of quality and efficiency are required. Hfodpfx Aexr Dduehvod

Condition: good (used), BACCI DOUBLE JET Hfedpfoxr Dcwox Ahvod The BACCI DOUBLE JET machine with a KUKA robot is an advanced, automated CNC machining center dedicated to the production of wood and wood-based components. The KUKA robot works with the machine's integrated feeder to automatically feed material for processing, significantly increasing efficiency and minimizing the need for manual operation. After the milling and grinding process is complete, the robot automatically retrieves finished parts and places them on pallets, streamlining production logistics and enabling continuous operation without interruptions for manual reloading. This system ensures seamless integration of the robot with the BACCI DOUBLE JET machine, which features dual machining heads and 12 interpolated axes, enabling simultaneous and precise machining of components. Automated material loading and unloading and the integrated feeder system increase efficiency and production repeatability while reducing labor costs and improving operator safety. This machine is primarily used in the furniture and carpentry industries, where high standards of quality and efficiency are required.

Condition: like new (used), Year of construction: 2020, operating hours: 96 h, As good as new, reach: 850mm, payload: 5kg, repeat accuracy: 0.03mm, weight: 20.6kg. With teach panel, control box, manuals. On-site inspection is possible. Hjdpfx Ahoq A S Dfevjfd

Year of construction: 2025, condition: new, functionality: fully functional, Electric Robot Movers Our electric robot movers are engineered for the safe, precise, and efficient transportation of heavy machinery and industrial installations. Thanks to their compact design and high load capacities, these movers are ideal for use in production facilities, technical installations, and other environments with limited maneuvering space. The movers are fitted with a hydraulic lifting cylinder, enabling controlled lifting and movement of loads. Operation is fully managed via a wireless remote control, allowing the operator to remain at a safe distance while maintaining maximum control during transport. Both the robot mover and the remote control are battery-powered and charged using a standard 230V connection. This ensures flexible and emission-free operation, independent of external hydraulics or combustion engines. Advantages of our electric robot movers: - High load capacities (up to 80 tons) Hodpeyh Inuofx Ahvjfd - Precise positioning and smooth travel movements - Compact design suitable for confined spaces - Emission-free and low noise - Safe operation via remote control - Quick deployment and minimal setup time Our robot movers are frequently used for machine relocations, production line adjustments, maintenance activities, and internal transfers within industrial environments.

Condition: excellent (used), Year of construction: 2007, Type: Industrial robot Brand: Hyundai / Hanwha TechM Hsdpfx Ajr Iy Nkehvefd Year of production: 2007 Maximum load: 200kg

Condition: excellent (used), Year of construction: 2014, Reach: 505 mm Hfodpfx Aswtqblehvjd Payload: 4 kg Robot weight: 28 kg Control: control module + handheld controller

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Year of production: 2014 Hfedpfxer Aka As Ahvod Lifting capacity: 20kg Reach: 1726mm

Year of construction: 2009, condition: excellent (used), Robot DENSO, KLS VS-6556E/E (sn: 02F133) year of manufacture: 2009 Number of axes: 6 Hfjdpfjizw Hgex Ahved Control system: RC5-VSE6BA-BP Pick-and-place robot with KRUPS conveyor belts. Reading system, automatic conveying

Condition: excellent (used), Year of construction: 2007, Industrial robot Brand: Hyundai / Hanwha TechM Year of production: Hfsdpfxor Iyyms Ahvsd 2007 Maximum load: 200kg

Condition: used, functionality: fully functional, We are offering for sale a Robot Coupe Blixer 23 A, 23 L, as pictured, complete with necessary tools and in excellent condition. This machine combines two functions in one: The Blixer unites the features of two well-known machines—a cutter and an emulsifier-mixer. It enables the processing of all kinds of raw and cooked foods into liquid, semi-liquid, or pureed end products. Efficient: Thanks to its large liquid capacity and a lid with scraper and sealing ring, this appliance allows for the preparation of a wide variety of blended foods, including enteral nutrition. Reliable: Blade with patented, innovative cutting profile for optimum cutting quality. Consistent cuts and fully uniform processing, even with the smallest quantities. With its high portion capacity (20–75), the Blixer 23 is ideally suited for use in hospitals, nursing homes, childcare centers, and, of course, restaurants. Maximum processing quantities: 4–15 kg. The control panel is equipped with a digital timer adjustable from 0 to 15 minutes and features a removable 23-liter tilting stainless steel bowl. An extra-low stainless steel blade with two removable, height-adjustable serrated blades is included. The unit has undergone a comprehensive inspection in our workshop and is fully operational. You will receive an invoice with VAT shown separately. Control panel: • Timer, adjustable from 0 to 15 minutes. The previously set processing time repeats automatically after the machine is stopped. • Flush stainless steel buttons for easy cleaning and long service life. • Indicator lights for maximum safety. • Pulse function for even higher cutting precision. Lid: • Transparent polycarbonate lid for continuous monitoring during processing. • Absolutely tight-fitting lid that closes with a simple hand movement. • Swing mechanism on the lid ensures that no liquids reach the motor block. • Central opening in the lid for adding liquids or ingredients during processing. • Lid and sealing ring are easily removable for thorough cleaning. Our used equipment service for you: • 6-month warranty on all electrical parts, limited to replacement of defective parts (does not include labor costs for removal and installation). • High-quality branded machines at fair prices. • Professional refurbishment/inspection & expert cleaning. • Tested & fully functional—or your money back. • Flexible shipping or local pickup options. • Competent advice—before and after purchase. • Provision of user manuals, wiring diagrams & spare parts. • DGUV V3-tested. Technical data: • Two speeds: 4400/5400 Watts • Speeds: 1,500 and 3,000 rpm • 400 V/50 Hz, three-phase • A: 8.5/10.5 W: 4,500 Hfjdpfex Uw R Nsx Ahvjd • Serial number: N6140112811 • Weight: 140.7 kg Condition: used, fully inspected, fully operational Specifications and errors subject to change. If you have any questions, require advice, or would like to view something on-site, please feel free to contact us during our business hours: Monday–Friday 09:00–13:00 and 14:00–17:00. Sale is subject exclusively to our general terms and conditions (GTC).

Condition: new, Year of construction: 2023, functionality: fully functional, We provide industrial robotics and engineering solutions as well as custom positioner production according to your project needs. Please contact us for further information. Hfedpfxjibbfvj Ahvod

Condition: excellent (used), Denso industrial robot with Denso controller Here we offer a Denso industrial robot with Denso controller. Industries and applications The VS-068 series offers high speed and high performance in a compact, sleek package. In addition, numerous options are available to enable operation in a wide range of environments. With its high-speed performance, accuracy and wide range of available options, the VS-068 can be used in virtually any application, including automotive, chemical, consumer goods, electronics, food, greenhouse, machine tool, medical device and pharmaceutical, plastics, and metal industries. The robot model can be used for assembly, inspection, alignment, material handling, material care, packaging, palletizing and custom applications. Denso VS-068 6-axis robot with Denso Robot Controller 410200-2611 The compact model impresses with outstanding performance and speed. Robot model VS068A4-AV6-C3N-ANNDN-NNNN Arm reach 710 mm Payload 7.0 kg Cycle time 0.31 sec Repeatability ±0.02 mm Weight: 49kg Hedpfx Askz Uzgjhvjfd Year of manufacture 2016 Type: Denso 6-axis robot VS-068 / Controller 410200-2611 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Denso industrial robot with Denso controller Here we offer a Denso industrial robot with Denso controller. Industries and applications The VS-068 series offers high speed and high performance in a compact, sleek package. In addition, numerous options are available to enable operation in a wide range of environments. With its high-speed performance, accuracy and wide range of available options, the VS-068 can be used in virtually any application, including automotive, chemical, consumer goods, electronics, food, greenhouse, machine tool, medical device and pharmaceutical, plastics, and metal industries. The robot model can be used for assembly, inspection, alignment, material handling, material care, packaging, palletizing and custom applications. Denso VS-068 6-axis robot with Denso Robot Controller 410200-2611 The compact model impresses with outstanding performance and speed. Robot model VS068A4-AV6-C3N-ANNDN-NNNN Arm reach 710 mm Payload 7.0 kg Cycle time 0.31 sec Repeatability ±0.02 mm Weight: 49kg Year of manufacture 2016 Type: Denso 6-axis robot VS-068 / Controller 410200-2611 Hfodpok E Ez Tsfx Ahved Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Denso Type: Denso 6-axis Robot VS-087 / Controller 410200-2611 A VS087-AV6-C3N model features a Cleanroom Class 3 protection specification. Denso industrial robot with Denso controller. Industries and Applications: Hjdpfskx Hu Asx Ahvjfd The VS-087 series delivers high speed and high performance in a compact, slim housing. In addition, numerous options are available, making operation possible in a wide range of environments. Thanks to its high-speed performance, precision, and the variety of available options, the VS-087 can be used in nearly any sector, including automotive, chemical, consumer goods, electronics, food, greenhouse, machine tool, medical devices & pharmaceutical, plastics, and metal industries. The robot model can be used for assembly, inspection, alignment, material handling, tending, packaging, palletizing, and custom applications. Denso 6-axis Robot VS-087 with Denso Robot Controller 410200-2611 The compact model impresses with outstanding performance and speed. Robot model VS-087A4-AV6-C3N-ANNDN-NNNN Reach: 905 mm Payload: 7.0 kg Cycle time: 0.34 sec Repeatability: ±0.03 mm Weight: 51 kg Year of manufacture: 2016 Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Condition: excellent (used), Denso industrial robot with Denso controller Here we offer a Denso industrial robot with Denso controller. Industries and applications The VS-068 series offers high speed and high performance in a compact, sleek package. In addition, numerous options are available to enable operation in a wide range of environments. Hfjdpfx Aekz Uy Rohved With its high-speed performance, accuracy and wide range of available options, the VS-068 can be used in virtually any application, including automotive, chemical, consumer goods, electronics, food, greenhouse, machine tool, medical device and pharmaceutical, plastics, and metal industries. The robot model can be used for assembly, inspection, alignment, material handling, material care, packaging, palletizing and custom applications. Denso VS-068 6-axis robot with Denso Robot Controller 410200-2611 The compact model impresses with outstanding performance and speed. Robot model VS068A4-AV6-C3N-ANNDN-NNNN Arm reach 710 mm Payload 7.0 kg Cycle time 0.31 sec Repeatability ±0.02 mm Weight: 49kg Year of manufacture 2016 Type: Denso 6-axis robot VS-068 / Controller 410200-2611 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 52.693.00, feed length X-axis: 1,525 mm, feed length Y-axis: 1,525 mm, feed rate Y-axis: 1 m/min, feed rate Z-axis: 1 m/min, Welding Robot – Fully Equipped Vertical Bend Arm Robot 6 axes Reach: 1525 mm Equipped with automatic welding gun, type: DIX MALZ 520 Wire feed device, manufacturer: FRONIUS, type: ROB.VR1500 DINSE-ZA Includes 2 rotary welding tables Plate dimensions: each 1200 × 750 mm Pneumatically driven cleaning device Positioning and straightening station for the torch Current source, manufacturer: FRONIUS, type: welding device TPS 4000 Supplied with technical documentation Note: The machine can be transported on a standard truck. Hfsdorl S Ufspfx Ahvsd Technical Attributes Dimensions (L × W × H): approx. 4700 × 3500 × 3800 mm Weight: approx. 5000 kg Year of construction: 2000

Condition: as good as new (ex-display), JUNE OFFER. FOR THE WHOLE OF JUNE -10% off all welding machines We offer welding machines in a wide variety of configurations and always have several sets in stock. CMT / ROBOT / CMT UNIVERSAL hose packages or HOLLOW SHAFT robots. Everything in stock and available immediately! Don't hesitate to request your customized configuration! We also have a wide variety of spare parts -30% -50% -70% in stock. Just send us a quick email, call us, or WhatsApp us. CMT MACHINES at 1/3 the new price! - 66% DISCOUNT Hfsdpfxohzhyne Ahved ALL MACHINES CAN BE VIEWED IN VIENNA and PURCHASED WITHOUT WAITING! The prices listed are all starting from ... euros. The prices/offers are created individually according to the device configuration. .) Fronius power source (TPS 4000 CMT) .) Fronius cooling unit (FK 4000) Vufdfi .) Fronius VR CMT wire feeder .) Fronius intermediate hose package .) Fronius trolley .) Fronius hose package CMT robot .) Fronius RCU 5000i Example images of the product. Please see the numerous YouTube videos on the topic of CMT! Also available via WhatsApp and Viber Stocked in Vienna 1230 (Vienna) Shipping on pallets available for an additional charge: Austria approx. 180 euros Germany approx. 230 euros Europe upon request All prices are starting from prices. You can configure the devices with us. Robot device or handheld device. Long connecting hose package or short. Various hose packages to choose from. Synchropuls. 270 400 or 500 amp units in stock. CMT versions available as handheld or robotic. It's best to call us. We'll discuss your application and give you an initial price estimate.

Condition: ready for operation (used), functionality: unexamined, A good used power block (servo amplifier) from a Kawasaki D Controller which was controlling a ZD130 4 axis palletizing robot Ready to ship worldwide We handle shipping and export paperwork if required More pictures available on request Hedpfxowv Udps Ahvjfd

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: CR690, overall weight: 1,350 kg, load capacity: 100,000 kg, Electric Chassis System Robot 100 Ton Set – OX TBC 100 The self-propelled trolleys offer a high load capacity of 100 tons and a very low height, with the ability to rotate 360°, making it possible to position them under all types of loads and for maneuvering. Motor-driven trolley models with hydraulic lifting cylinders are also available for loading onto vehicles or shelves, offering a speed of up to 5 m/min max. Length - 1602 mm Width - 2019 mm Height - 315 mm Max. load/lifting capacity - 100 tons Hfsdsw Taikjpfx Ahvsd Remote control