Used Wire Stitch for sale (3,854)

Condition: used, wire diameter - max. 10 mm wire diameter - min. 3 mm wire length 8 m total power requirement 7,5 kW weight of the machine ca. 1,1 t Gbjdpfx Aswu Hg Hjfiju dimensions of the machine ca. LxBxH 2,53 x 0,75 x 1,1 m

Year of construction: 1995, condition: ready for operation (used), X-axis: 400mm, Y-axis: 250mm, Z-axis: 256mm, max. workpiece weight: 400kg, max. workpiece dimensions: 580/860/250mm, support surface: 680/500mm, min. start hole diameter: 2mm, cutting rate: 185mm²/min, generator: Agiplus-MMD, control: Agimatic CF20. With dielectric processing unit DA-15/C. The display power supply is defective. The machine has already been dismantled, an on-site inspection is possible. Gjdpfxjw Sxx Is Afisbu

Condition: good (used), Year of construction: 1999, X axis 410 mm Y axis 260 mm Z axis 170 mm Max. workpiece length 580 mm Max. workpiece width 350 mm Max. workpiece height 170 mm Max. workpiece weight 100 kg CNC type Gbodpevbbwnefx Afieu Work tank length 580 mm Work tank width 350 mm Work tank height 170 mm Price/piece.

Condition: like new (used), Year of construction: 2004, machine/vehicle number: 41572121, Demag new/unused wire rope hoist. Despite the 2004 year of manufacture, this unit is still new and unused. Type: Demag DH520 H52 KV1 – 4/2-2 F10 Gjdew Sktkjpfx Afiobu Lifting capacity: 4000 kg Hook path: 30.20 m Hoisting cable: ø 11 mm Lifting speed high: 6.3 m/min Lifting speed low: 0.6 m/min Power: 3.6 kW Fine lifting: FG08 i = 10.00 Lifting motor: KBH 112 B4 Small lifting motor: KBA 71 B4

Condition: good (used), Year of construction: 1996, Wire EDM machine MATRA ROBOCUT CX-OC X 320mm/900 mm Gbedpfx Afeucf I Uoiju Y220 mm/900MM U120 mm/450 mm V120mm/450mm Z180mm/450mm Fanuc control LTD Machine weight 1.5 tons

Condition: excellent (used), Year of construction: 2012, loading capacity: max. 1.500 Kg. wire diameter range: 0,5 - 9,0 mm coil outside diam. max. 1.000 mm Gbodpovam Iisfx Afieu coil inside diam. min. 300 Kg. speed: 0 - 80 U/min

Condition: good (used), Year of construction: 2007, AgieCharmilles FI 240 ALP (2007) Technical Specifications of AgieCharmilles FI 240 ALP Wire Cutter (2007) • Manufacturer: AgieCharmilles • Model: FI 240 ALP • Year of Manufacture: 2007 • Machine Type: Wire EDM (Electrical Discharge Machining) Technical Data: • X-Axis Travel: 350 mm (13.78”) • Y-Axis Travel: 250 mm (9.84”) • Z-Axis Travel: 256 mm (10.08”) • U/V Axis Travel: ± 70 mm (± 2.76”) • Max Workpiece Dimensions: 750 x 550 x 250 mm (29.53” x 21.65” x 9.84”) Gbjdpsv I Snqefx Afieu • Max Workpiece Weight: 200 kg (440 lbs) • Wire Diameter: 0.1 – 0.3 mm (0.004” – 0.012”) • Max Taper Angle: ±30° at 100 mm height (±1.18” at 3.94”) • Wire Spool Capacity: 25 kg (55 lbs) • Generator Type: AgieCharmilles ALP (Adaptive Logic Pulse) • Surface Finish (Ra): Down to 0.2 µm • CNC Control: AgieCharmilles CNC • Power Supply: 400V, 50/60 Hz • Machine Dimensions: Approx. 2,000 x 2,000 x 2,000 mm (78.7” x 78.7” x 78.7”) • Machine Weight: Approx. 2,800 kg (6,170 lbs)

Condition: used, Manual pipe bender, pipe bending device, mandrel bending machine Hand-held pipe bender, hand-held wire bending machine, bending machine Manufacturer: MEWAG Bending capacity: max. Ø 16 mm 1 bending tool Ø 15 mm with 25 mm bending radius Godpfx Afewhf Hfsiebu 1 bending tool Ø 10 mm with 16 mm bending radius 1 bending tool Ø 8 mm with 9 mm bending radius 1 bending tool Ø 6 mm with 8 mm bending radius 1 bending tool Ø 5 mm with 8 mm bending radius - Rotating plate with degree markings - Scope of delivery as shown - Wooden box for storage Dimensions L x W x H: 570 x 480 x 145 mm Weight: 43 kg Good condition

Condition: used, Year of construction: 1993, travel distance X-axis: 320 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 116 mm, workpiece height (max.): 150 mm, workpiece width (max.): 990 mm, workpiece length (max.): 505 mm, table width: 420 mm, table load: 500 kg, Equipment: cooling unit, documentation/manual, Taken out of production in working condition, removed due to the purchase of a new machine. Godpfx Afewu Shpsiobu The machine is currently disconnected and dismantled in our warehouse. All cables are numbered and photographed; these can be shared after payment for the machine to ensure correct installation at the new location.

Condition: good (used), Year of construction: 2003, functionality: fully functional, Fanuc Series 180iS-WB Control Travel paths: X 320 mm, Y 220 mm, U 120 mm, V 120 mm, Z 180 mm, Gbsdpfjwl Hiiox Afieu Max. workpiece weight 500 kg, Machine weight 1,700 kg, Power supply 13 kVA The machine can be inspected while powered.

Condition: used, Year of construction: 1997, working width: 700 mm, For sale from Norderstedt site due to closure of business Gbsdpfetz S H Aox Afiou Punching machine for Wire-O punching incl. 3 tools

Condition: excellent (used), Year of construction: 2009, loading capacity: max. 1.500 Kg. wire diameter range: 0,5 - 6,0 mm Gsdpfxevck Huj Afiobu coil outside diam. max. 1.000 mm speed: 0 - 80 U/min

Year of construction: 2013, condition: ready for operation (used), Also suitable for processing flat steel, including documentation, without accessories, machine was scarcely used. Gbsdpfx Afshhnyfsiju

Condition: used, Electric hoist, crane, electric wire rope hoist, wire rope winch DEMAG type P 10 Serial no. 941 477 Year of construction 1962 Lifting capacity 2000 kg with 4 ropes Lifting height 5 meters Lifting speed 6 m/min. Fine lifting speed 1.3 m/min. Reeving 4/1 Gbedpfx Afor E Ht Hsiju Motor power 0.6 / 2.6 kW Mains connection 380 Volt, 50 Hz - DEMAG hoist, type 19/11 K28P - Electric trolley DEMAG, type 13 / 6 K8 - 1 Travel speed approx. 19 m/min - Trolley for double T-beams, beam width 120 to 180 mm - Load hook for 4 load lines - Operating cylinder for the hoist with approx. 2.5 meter cable length Space requirement L x W x H 1400 x 900 x 500 mm Weight 350 kg Good condition

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 1951, Straightening machine with 4 straightening lines for wire diameters of 8, 10, 12, and 14 mm. Electromechanical drive of the feed rollers and rotating straightening units. Cutting device with automatic imprinting of the manufacturer's identification. Electronic length measurement with rotary pulse encoder. Parallel drive of the straightening lines is possible for 8–14 mm diameter (up to 3 lines max). Control panel with switching and monitoring functions. Program control via SPS Simatic S5. Bar run-out track with a length of 14 m, equipped with 4 collection troughs for wire diameters of 8, 10, 12, and 14 mm. Wire feed consists of 4 wire decoiling reels, pneumatically braked and controlled, for coil weights up to max. 2,500 kg. Gbjdpfx Asw Rvg Tjfisu

Condition: used, Year of construction: 2001, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: P0131I146, workpiece weight (max.): 1,000 kg, travel distance X-axis: 520 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 310 mm, overall weight: 2,600 kg, Wire EDM machine in excellent condition with few operating hours, purchased used and refurbished directly by the official FANUC dealer. The machine is equipped with a chiller to maintain the working water temperature and comes with all the necessary equipment for machine setup. Gbsdew N Tbropfx Afiju

Condition: excellent (used), Year of construction: 2002, operating hours: 34,000 h, functionality: fully functional, Agie Excellence 2F, year 2002. Machine in excellent condition. Can be inspected at our premises in Semsales, Switzerland. Gedpfx Afew N Tazoijbu

Year of construction: 2016, operating hours: 9,606 h, condition: ready for operation (used), General Data Machine weight 4690 kg Main Drive Number of axis 5 Movement X-Axis Movement 600 mm Y-Axis Movement 400 mm Z-Axis Movement 350 mm V-Axis Movement ± 50 mm U-Axis Movement ± 50 mm Workpiece Godpfx Asv Ir Ahefijbu Workpiece weight 1000 kg This 5-axis +GF+ Agie Charmilles CUT 30P wire EDM machine was manufactured in 2016. Ideal for precision cutting, it offers advanced control features and robust construction. Consider the opportunity to buy this +GF+ Agie Charmilles CUT 30P wire EDM machine. Contact us for more information. Application Types EDM

Year of construction: 1981, condition: ready for operation (used), Including documentation. Gbedpfxoi Athvo Afiju

Condition: refurbished (used), Year of construction: 2022, machine/vehicle number: M4502000050, Dimensions (WxDxH): 560x600x1400 mm Print Envelope (WxDxH): 145x168x390 mm Weight: 250 kg Laser Type: 6 x 200 W direct diode lasers Laser Wavelength: 976 nm Total Laser Power: 1200W Power Input: 208/230 V single phase or 400 V three phase Power Consumption: 2-5 kW peak depending on selected options Process Control: Closed-loop, laser and wire modulation Enclosure: Laser-safe, sealed, controlled atmosphere Interface: USB, ethernet, wireless datalink Gbjdeqi A Hxopfx Afiou Cooling: Active water-cooled chiller included Wire Materials: Compatible with a wide range of welding wires including stainless steels, mild steels, carbon steels, titanium alloys, inconel and tool steel. Wire Feedstock: Diameter: 0.8-1.2 mm Spool Type: BS300 The machine was delivered from Meltio Spain in September 2022 in Refurbished condition and has only been used for printing the calibration cube. It has been equiped with new laser fibers with thermistors which check the temperature of the laser fibers and protect from overheating especially in long print jobs and up to date chamber door/safety glass. Hot wire option offers increased print speed with a programmable power supply that preheats the material before it enters the melt pool. The Dual Wire option allows for the fast and automatic switching of materials within a print without cross-contamination. Simplify3D licence (V4.1.2) is included.

Condition: good (used), Winch rope, crane rope, hoist rope, wire rope, clothesline, PVC wire rope Gsdpfxepy Ryqj Afijbu -Wire rope: Steel rope PVC coated -Type: 6x7 FC PVC transp. -Rope nominal diameter 4.0 / 5.0 mm -Length: 102 m -Quantity: 2 pieces available -Price: per piece -Weight: 6.6 kg/piece

Condition: used, Nabertherm Nabertherm N 2260/S Chamber Furnace with Wire Heating up to 1300 °C Technical Specifications – Nabertherm N 2260/S Feature / Value Model: Nabertherm N 2260/S Maximum Temperature: 1300 °C Voltage / Connection: 400 V, 3~ (three-phase current), PE (protective earth) Heating Power: 75 kW Heating Zones: 5-sided (sides, floor, door, optionally ceiling) Internal Dimensions (Firing Chamber) Dimension / Value Width: 1,500 mm Depth: 1,000 mm Height: 1,720 mm Volume: approx. 2,580 liters External Dimensions (Complete Unit) Gedpfow Ec Egox Afiebu Dimension / Value Length: 2,000 mm Width: 2,250 mm Height: 2,850 mm Weight: approx. 3,100 kg Condition: used Scope of delivery: (see photo) (Subject to change and errors in technical data and information!) For further questions, we are happy to assist you by phone.

Condition: used, für Draht Gbjdpfx Afsh Tafxeiju hydraulically tiltable ja 2 t Year unbekannt Hydraulik +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Year of construction: 2018, condition: ready for operation (used), General Data Machine weight 2200 kg Gbodpfxsw E Rnvj Afieu Control Unit Brand FANUC Model 31i-WB Movement Z-Axis Movement 255 mm Workpiece Workpiece weight 500 kg Additional Equipment Optional Thin wire, Wire diameter [mm]: Ø 0.05 ~ Ø 0.30 Automatic front door UV axis travel [mm]: ± 60 × ± 60 Minimum step increment of the drives [mm]: 0.0001 General Data Machine weight 2200 kg Control Unit Brand FANUC Model 31i-WB Movement Z-Axis Movement 255 mm Workpiece Workpiece weight 500 kg Additional Equipment Optional Thin wire, Wire diameter [mm]: Ø 0.05 ~ Ø 0.30 Automatic front door UV axis travel [mm]: ± 60 × ± 60 Minimum step increment of the drives [mm]: 0.0001 This FANUC Robocut alpha-C400iB was manufactured in 2018. It features a maximum workpiece size of 730 x 630 x 250 mm and can handle weights up to 500 kg. The machine includes a FANUC 31i-WB controller and supports wire diameters from 0.10 to 0.30 mm. Consider the opportunity to buy this FANUC Robocut alpha-C400iB wire edm machine. Contact us for more information. Application Types EDM

Year of construction: 2012, condition: ready for operation (used), There are 5 identical heavy wire bonders Hesse available. Max. bond head: 500µm, max. bond force wire/ribbon & Cu: 2500cN/5000cN, cutting methods: Active/Air/Passive, working range X/Y: 350mm/560mm, max. power: 3 wires/s, accuracy: 2µm at 3σ. Weight: approx. 1400kg. Godjtncl Djpfx Afijbu