Used Window Manufacturing for sale (41,694)

Condition: used, Year of construction: 2000, Storage location: Nattheim Fedpfx Abevwdmwj Tsgk

Year of construction: 2012, condition: excellent (used), Ruchser roller conveyor for windows with 90° turning device left/right length 4400mm Electrically driven accumulating rollers with 2 parallel system components pneumatically tiltable from vertical 7° outside to vertical 7° inside. Plant parts 1900 mm high with rubber roller strips. Between the rubber strips stainless steel plates 2 mm deeper for sliding surface clip holders. Inlet and outlet with edge protection rollers up to 3000mm high as rubber rollers. Fgodpfjlpcc Iex Ab Tsk Infeed track 2000 mm, outfeed track 4000mm driven accumulation rollers. Control and operating element mounted on freely adjustable stand.

Condition: ready for operation (used), functionality: fully functional, Very well-maintained double pressure press DM5 from Heuer Hammer. Immediately ready for operation. Fgjdjxzft Nopfx Ab Tjk

Condition: new, The CT 25 (Ø 0.2 to 2.5 mm) replaces and/or complements the 25TS, which operates with a cam system. This machine has between 11 and 16 axes, details of which are given below: - 8 independent slides - wire feed - nozzle rotation - servo spinner OR lateral movement of winding finger Optional (up to 5 additional axes) Fgodpjvbd Ezofx Ab Tok - servo cutter - servo spinners (additional) - lateral movement of winding finger - transfer for raising the second (German-type) extension spring eye. Maximum feed speed: 121 m/min. Slide travel: 50 mm Machine dimensions: 1.30 x 1.46 x 1.68 m. Machine weight: 900 kg. If you have any further questions, please do not hesitate to contact us.

Condition: excellent (used), CNC Woodworking Center. Fgjdpfx Abjwmxkhe Tsk

Condition: used, Year of construction: 2008, functionality: fully functional, 90° welding and possibility of welding angles from 40° through 180° Limitation of standard welding seal thickness (2mm.) (1 mm upon request). Reduction of welded profile length 3 mm. For each welded profile side. Automatic temperature control of the fusion plate. Automatic control of fusion times. Automatic control of welding times. Adjustment of fusion pressure. Integral protection of working area, fusion plate and locking cylinders. Working cycle and other functions controlled by an electronic card (DCS) Profile supports for quick change-over of counter forms. Device for quick change-over of profile positioning blade. Time-controlled working cycle . Fsdpoxytpcofx Ab Tjgk Working cycle with possibility to repeat the profile locking, in case of wrong positioning Profile supporting arms.

Condition: used, Year of construction: 2007, Tenoning spindle 3 St. Number of milling agregates 5 St. Spindle diameter 50 mm Control Control 100 PC SCM Windor 100 CNC still in operation, available for inspection until the end of December 2025 ----- Powerful and flexible CNC manufacturing system for windows and doors Processing of workpieces up to a maximum length of 4500 mm, width of 250 mm, and thickness of 150 mm Consists of a Windor 60 model B Infeed conveyor Slotting section: ----- Item 1: Miter saw ----- - Motor 4 kW - 3000 rpm - Spindle diameter 40 mm - Maximum tool diameter 400 mm, bore 80 mm Item 2: 1st slotting spindle ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 3500 rpm - Maximum tool diameter 370 mm - Locking device "Jolly" - Continuous vertical positioning - Interpolating rotations, automatic inclined window adjustment +/- 60 degrees Item 3: Electric spindle with HSK 63 F tool holder ----- - Min/max. Rotation speed 1000-12000 rpm - Maximum motor power 11 kW - Water cooling - Rapid 24 automatic tool changer with 24 positions Item 4: 2nd slotted spindle ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 3500 rpm - Maximum tool diameter 370 mm - "Jolly" locking device - Continuously variable vertical positioning - Interpolating rotations, automatic inclined window device +/- 60 degrees Item 5: 3rd slotted spindle ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 3500 rpm - Maximum tool diameter 370 mm - Locking device "Jolly" - Continuous vertical positioning Fleximat ----- Including left and right stops with horizontal CNC adjustment for the following through-feed operations: Lock case milling and 9-degree anuba drilling from the right. Dowel drilling and strike plate marking from the left and right, 7 spindles each. Cup hinge drilling and olive drilling from the top. Fedsw Im Iijpfx Ab Tegk Profile part ----- Item 5: Power 2000 F4: Electric spindle with HSK 63 F tool holder ----- - Working from the left - Min/Max. Rotation speed 1000-18000 rpm - Maximum motor power 12 kW - Water cooling - Rapid 24 automatic tool changer with 24 positions Item 6: 1st profile spindle from the right ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 6000 rpm - Tool diameter min./max. 130-250 mm - Continuously variable vertical positioning - Continuously variable horizontal positioning Item 7: 2nd profile spindle from the right ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 6000 rpm - Tool diameter min./max. 130-250 mm - Continuous vertical positioning - Continuous horizontal positioning Item 7: 3rd profile spindle from the right ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 6000 rpm - Tool diameter min./max. 130-250 mm - Continuous verti...

Year of construction: 1983, condition: good (used), Window handle drill Fgedeirt Ehspfx Ab Tsk

Condition: ready for operation (used), Year of construction: 1963, functionality: fully functional, Very well-preserved double-pressure press DM3 from Heuer Hammer. Immediately ready for use. Fjdpfx Absxywlne Tjgk

Year of construction: 2018, condition: used, controller manufacturer: SIEMENS, controller model: 15 13F-1 PN, CONTROLS .. SIEMENS 15 13F-1 PN 1. General Description Fjdexwkytopfx Ab Tsgk The draw-oil preparation system is designed for the optimal treatment of un-drawn tubes prior to the drawing process. A large-volume draw-oil bath ensures homogeneous wetting of the tube surface, providing uniform lubrication, reducing friction during drawing, improving the tube surface quality, and increasing tool lifetime. A constant material flow as well as stable bath temperature and bath quality make this system a critical process step in efficient tube production. _____ 2. Performance Data & Capacities • Tube diameter range: 18–75 mm • Bundle weight: maximum 5 t • Maximum tube length: 9 m • Bath volume: 20 m³ • Electrical supply: 400 V / 180 A / 50 Hz • Operation mode: Semi-automatic _____ 3. Functional Principle Immersion Bath & Medium Conditioning • Uniform lubrication through full immersion in the draw-oil bath • Tubes integrated in the tank walls serve for oil heating via the furnace heat-recovery system • Oil circulation: Chemetall process, 12 cycles per hour • Prevention of water pockets: Precise water dosing; compressed-air injection if required • Bath composition control: Regular sampling • Dosing station: Automatic adjustment of oil and water additives _____ 4. Measurement & Control Parameters The following process parameters can be monitored and controlled: • Immersion time • Drip-off time & park time at all 3 drip stations • Crane inclination during immersion • X and Y axis positions • Crane speeds • Cycle types: Mix, Activate/Deactivate, Automatic, Pause, Cycle, Cycle interruption _____ 5. Control System & Safety • Siemens PLC: CPU 1513F-1 PN • Software: TIA Portal V15.1 • HMI: Siemens TP1200 Comfort Panel • Safety concept: Complete risk assessment available • Includes control cabinet, electrical documentation and software backup _____ 6. Automatic Overhead Crane • Type: Matr. 2981 t.6.5 • Travel speed: up to 40 m/min • Class: A6 (FEM 1.001 – ISO) • Wheels: 4 pieces, Ø 315 mm • Track gauge: 13,000 mm • Weight: 8,000 kg • Motor: FC90LFECCL-4, 1.5 kW, IP55 • Brake: Disc brake, DC 400 V • Gearbox: TP 315/90BR, ratio 1/35 _____ 7. Components Included in the System • Loading cart • Immersion tank • Medium circulation pump • Portal crane / automatic overhead crane • Drip-off station • Unloading cart • Extraction system • Dosing unit • Control cabinet & operator panel _____ 8. Documentation • Operating manual • User manual • Electrical & control diagrams • Declaration of conformity • Software backup

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, total width: 5,000 mm, total height: 3,500 mm, total length: 2,800 mm, working width: 1,500 mm, space requirement length: 35,000 mm, Nailing Line GSI150 SV9 - GSi 270 PV9 2x 9m discharge conveyor belts Fgjdpfx Asv D D Nrjb Tsk 1x 5.30m discharge conveyor belt 1x 2.0m discharge conveyor belt Machine is still operational Available from January 2026 Price is negotiable

Condition: new, Year of construction: 2024, operating hours: 50 h, functionality: fully functional, total width: 1,750 mm, total length: 7,500 mm, total height: 1,700 mm, input voltage: 380 V, overall weight: 3,200 kg, Manufacturer: Boton Condition: New Product Description: The high-quality window patching machine from Boton delivers a precise, fast, and reliable solution for window patching on folding cartons—including challenging designs such as corner windows. Thanks to its well-thought-out construction and modern control system, this machine is ideal for operations that demand the highest standards of quality and efficiency. Features: ✅ Standard and Corner Window Processing Flawless patching even for 'corner windows'—for maximum manufacturing flexibility. ✅ Precise Positioning Automatic centering system and adjustable adhesive technology ensure consistently high processing quality. ✅ Efficient and Time-Saving High degree of automation for short cycle times and optimal integration into existing production lines. ✅ User-Friendly Controls Intuitive touch-screen control panel—simple adjustment and rapid changeover for different window sizes and types. ✅ Robust Construction Industrial-grade components and durable materials for continuous operation. Technical Specifications Max paper size: 950x780 mm Min paper size: 150x130 mm Paper thickness: 1 - 6 mm Fsdpfx Abswlr Evo Togk Window size (max): 380x300 mm Window size (min): 50x50 mm Speed: 8,000 pcs/h

Condition: used, Tenoning spindle 1 Stk. Number of milling agregates 5 St. Spindle diameter 50 mm Weinig Unicontrol 12 with radial and axial NC spindles, VARIO table, and milling carriage ..... Machine still in operation available for viewing! Optionally available with used tools and window design software for data transfer to the Unicontrol 12! Technical Data Summary (Please inquire about any additional accessories included) ..... Crosscut Saw ..... > Electronic crosscut saw, continuously adjustable horizontally > Number of tools: 1 > Spindle speed: 3,000 - 6,000 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment light for detecting the saw cut > Axial adjustment range: 150 mm, electronically continuously adjustable NC axis > Radial pneumatic adjustment range: 8 positions, e.g., for edge rounding from above Rounding Unit ..... > Position: horizontal, below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Tool clamping length: 25 mm > Spindle speed: 9,000 rpm > Tool diameter: max. 130 mm > Axial adjustment range mechanically coupled to the cross-cut saw. > Radial adjustment pneumatically controlled on/off Electronic length stop ..... > Length 4,100 mm 1. Tenon and slot spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm NC axis, continuously variable > Spindle speed: 2,800 rpm > Tool diameter: max. 400 mm > Follow-up counter, the entire clamping length is countered Transfer belt ..... For transferring parts to the longitudinal processing area, including double part separation before the infeed of the longitudinal processing area. 1. Profiling spindle (up- and down-axis rotation) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range: 350 mm, continuously variable NC axis > Radial adjustment range: 80 mm, continuously variable NC axis Fjdpoxwdv Iefx Ab Tjgk > Spindle speed: 6000 rpm > Minimum tool travel circle: 140 mm > Maximum tool travel circle: 232 mm > 2 feed rollers, pneumatically controlled axially opposite the spindle, 8 positions 2. Profiling unit (grooving unit from above) ..... > Position: horizontal, top > Motor power: 3.7 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment range: 30 mm 8 positions > Radial travel 125 mm, 8-station turret > Spindle speed: 9,000 rpm > Maximum tool travel: 130 mm 3rd profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial travel 350 mm, continuously variable NC axis > Radial travel 80 mm, continuously variable NC axis > Spindle speed: 6,000 rpm > Minimum tool travel: 140 mm > Maxi...

Condition: new, Long Reach Boom-Arm Set Manufacturing For detailed information please contact us Fodpfoxxiahex Ab Tjgk

Condition: ready for operation (used), Year of construction: 1967, functionality: fully functional, Very well-maintained double-pressure press DM2 by Heuer Hammer. Immediately ready for use. Fedpfx Absxywkwo Tjgk

Condition: used, Valve slide production: 2 Lidköping centerless grinding machines: Type 46/G and Type 4B/G 1 Fedpfxsw Sw Rco Ab Togk Comp-Cleaner 1050 washer 2 Kadia 1EMC-1-35AS brushing machines 2 3-Nines extractors 1 Knoll HF1000/6000 coolant treatment system *

Condition: like new (used), Year of construction: 2022, functionality: fully functional, complete plat concisting of: Bi-rail overhanging conveyor with two points bar support , lift and rotation unit Spray booth for robot with full recirculation, with autimatic pre-filter replacment system High pressure humidificer for spray booth and flash off room Robotic spray system for windows with jacket nozzle cleaning unit automatic color change (3 independent ) electrostatic safty system paint flow meter drying tunnel with ldp system and axial fans Fgjdpfx Aboxw Ux Hs Tjk supervisor systeem with data interface and datamic reader “The line is packed for transport. It has been previously installed, but it has never been taken into operation.”

Condition: used, Year of construction: 1974, functionality: fully functional, machine/vehicle number: N32469, National double printing press M68, used, year 1974, Fjdpewiuy Rsfx Ab Tegk

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm 1 used Weinig Unicontrol 6 ----- Technical Specifications Summary ----- 1. Crosscut saw ----- Pneumatic crosscut saw, against 8-way turret stop Spindle speed: 2800 rpm Spindle diameter: 40 mm Max. tool diameter: 350 mm Motor power: 3 kW Laser alignment light for detecting the saw cut: Manual length stop 4100 mm 1. Tenon and slotting spindle ----- Number of tools: 3 / 4 Tool clamping length: 320 mm Vertical pneumatic spindle stroke: 240 mm for wood thicknesses IV 68-92 Spindle speed: 3500 rpm Spindle diameter: 50 mm Max. tool diameter: 320 mm Motor power: 11 kW 1. Profiling spindle - synchronous and counter-rotating spindle ----- Position: vertical right Number of tools: 1 Tool clamping length: 120 mm Spindle speed: 6000 rpm Spindle diameter: 50 mm Maximum tool radius: 232 mm Motor power: 7.5 kW 2. Profiling spindle ----- Position: vertical right Number of tools: 3 / 4 Tool clamping length: 320 mm Vertical pneumatic spindle stroke: 240 mm for wood thicknesses IV 68-92 Spindle speed: 6000 rpm Spindle diameter: 50 mm Maximum tool radius: 232 mm Motor power: 11 kW 3. Profiling spindle (fitting spindle) ----- Position: vertical right Number of tools: 3 Spindle speed: 6000 rpm Spindle diameter: 40 mm Maximum tool radius: 180 mm Motor power: 3 kW Clamping length: 150 mm 4. Glazing bead saw (horizontal-vertical) Cycled ----- Position: horizontal, top Number of tools: 1 Tool clamping length: 40 mm Spindle diameter: 40 mm Fjdpfsxvtggjx Ab Tegk Motor power: 3 kW Axial cycle, 2 positions Radial cycle, 2 positions Other features ----- Flanging device for tear-free flanging Double parts package Return device for 1-person operation at working height: Swivel bath Screen control, 99 programs Sloped window device Electronic angle display for sloped windows INCLUDING window tools OPPOLD, year of manufacture 2013: Oppold IV 68/78/92 Wood Oppold IV 68/78 Wood-Aluminum Sale of tools in the condition, scope and with accessories as available in our warehouse. Note on window cuts, tool drawings, tool system listings: Engelfried does not guarantee that the tools actually available correspond to the systems mentioned and drawn. (Technical specifications according to the manufacturer - without guarantee!)

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, WEINIG Unicontrol UC 10-5 Window Production Machine 1. Electronically controlled crosscut saw with laser switching between saw cutting and zero-point wheel, 3 kW motor 2. Grooving spindle 50 x 630 mm for tools 6 x 80 mm, 15 kW motor 3. Longitudinal/synchronous profiling spindle 50 x 320 mm for tools 4 x 80 mm, 11 kW motor 4. Grooving spindle (between 1st and 2nd lifting spindle), D = 40 x 40 mm, axially indexed, 3 kW motor Fgedpfx Ajxmr N Iob Tok 5. Longitudinal profiling spindle 50 x 320 mm for tools 4 x 80 mm, 11 kW motor 6. Longitudinal profiling spindle 50 x 320 mm for tools 4 x 80 mm, 11 kW motor 7. Clamping spindle 40 x 150 mm, 3-position axial cycle, 2-position radial cycle, 3 kW motor Saw and grooving spindle on the right side, 3 kW motor Hardware spindle 40 x 150 mm, 3 kW motor Adjustable feed speed 6-12 m/min, 1.1 kW motor 4-position counter changer Electronic length stop, 3600 mm Workpiece return system with automatic rotating mechanism Automation package Interval-controlled sash support Double parts package Laminated fabric tables (for sanded surfaces) Pressure guide on the left, max. wood width difference 100 mm Machine in very good technical and visual condition

Condition: good (used), Year of construction: 2007, Technical characteristics : - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw Fsdpfjt R T Hcsx Ab Tsgk 5.5 hp (4 kW) Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard 3- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: 5-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) 10-: digital guide 11-: Return of parts to the operator NO TOOLS AVAILABLE OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

Condition: good (used), different versions LxWxH 112x72x117 cm total 460 pcs LxWxH 112x72x95 cm total 154 pcs Fgedpfxoxv S Euo Ab Tjk LxWxH 150x94x82 cm total 12 pcs LxWxH 102x62x79 cm total 33 pcs

Condition: good (used), Extruder for the production of plastic pipes The machine can be inspected by appointment! Videos demonstrating its operation can be viewed on the manufacturer's website! Fedjxcwxyjpfx Ab Tjgk

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm Fgedoxtvgkjpfx Ab Tjk # 2809 Weinig Unicontrol 6 ----- Technical Specifications Summary (Please inquire about any additional accessories included) Item 1: Crosscut Saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment light for detecting the saw cut CNC-controlled length stop ----- > Length 3,500 mm > Electronic length stop including positioned crosscut saw Item 2: Tenon and slotting spindle ----- > Number of tools: 3 (stroke 2 x 100) mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Vertical pneumatic spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 3000 rpm > Max. tool travel circle: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 360 mm > Motor power: 11 kW Item 3: 1st profiling spindle (straight and counter-rotating) ----- > Position: vertical right > Number of tools: 1 > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool travel circle: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Vertical pneumatic spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Maximum tool travel: 232 mm > Motor power: 11 kW 2 axially indexed feed rollers opposite the profiling spindle, for the production of narrow, short parts (e.g., glass-parted muntins) Muntin guide consisting of: Muntin support bar from above in the area of ??the profile milling unit vertically on the right and the profiling spindle. Item 5: Profile milling unit, horizontal, top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Tool travel radius max. 130 mm > Axial adjustment range: 30 mm, 2 positions > Radial adjustment range: 125 mm, 4 positions, manual Item 6: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range: 115 mm, 8 positions via pneumatic turret > Radial adjustment range: 110 mm, 8 positions via pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Tool travel radius Max.: 210 mm > Motor power: 3.0 kW Other features ----- > Electric feed height adjustment including mechanical digital display and manual feed bar clamp > Rebating device for tear-free rebating > Double parts package > Return conveyor for one-person operation: swivel belt > Screen control > Sloped window device > Electronic angle display for sloped windows > Industrial PC, with Windows PC control/NEXUS Extraction nozzle diameter: ----- Crosscut saw 80 mm Slotting spindle 140 mm Profile spindle 1 140 mm Profile spindle 2 140 mm Top grooving device 80 mm Fitting spindle 120 mm ----- Pr...

Condition: used, Year of construction: 1998, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm 1 GUBISCH – CENTROMAT CW 2 will be sold on behalf of our customer, ex location ----- Manufacturer description: ----- For window and door production, with 50 mm spindle diameter in longitudinal profiling. With the following processing stations and options: - Slotting machine on one side for straight and angled connections Milling machine for longitudinal profiling - Rebating operation with synchronous milling unit and automatic plunge. Pivoting frame support up to 650 mm - Central control Fodpfx Abjw I Eawo Togk 1.0 cross-cut saw automatically plunges from above ----- Motor power, including motor brake: 3.0 kW Spindle speed: 2,800 rpm. Cutting circle diameter: 350 mm diameter Spindle diameter: 30 mm diameter Clamping flange, 1 driver 6 mm diameter TK 42, 120 mm diameter Pneumatic vertical stroke: 100 mm Pneumatic horizontal stroke: 160 mm against 2 manually adjustable 6-way turret stops Chip extraction hood with extraction nozzle 100 mm diameter 2.0 slot unit ----- Motor power, including motor brake: 9.2 kW Spindle speed: 3,800 rpm Flight circle diameter: 320 mm diameter Spindle diameter: 50 mm diameter Usable spindle length: 320 mm Pneumatic vertical stroke fixed: 2 x 100 mm Suitable for 3 tool sets of 100 mm each Zero height: 10 mm Chip extraction hood with extraction nozzle: 160 mm diameter 3.0 Slotting table ----- Table height above floor 920 mm Feed for 4 speeds freely adjustable: - 1. Milling, slanting window and typing speed can be set in the table (approx. 7 m/min.) - 2. Sawing speed approx. 7 m/min. (can be set on the device) - 3. Transfer speed approx. 10 m/min. (can be set on the device) - 4. Return speed/without processing approx. 25 m/min. (can be set on the device) - Motor power, including motor brake 0.37 kW Workpiece clamping pneumatic Pendulum pressure shoes Workpiece clamping pneumatic 1 clamping cylinder with 2 additional pressure shoes 3.1 Counter wood device Counter wood changer with 2-way automatic change and then with manual. Rotation of 180 degrees, 2 further counters possible, which then also counter in automatic mode 3.2 Length stop ----- - Stop system with 3 scales for - a) outside frame - b) outside sash upright - c) outside sash crosswise Adjustment manually - Length with attachable extension 3000 mm - for sloped windows, pivotable +/- 60 degrees 3.3 Angle transfer - automatic via vertically clocked feed roller in the milling feed 4.0 Milling machine For longitudinal profiling and rebating of windows/doors with the following units: ----- 4.1 First profile milling unit ----- - Counter-rotation - Synchronous rotation with automatic plunge can be used for rebating - Motor power including motor brake: 9.2 kW - Spindle speed: 6000 rpm. - Cutting circle diameter: 240 mm max. - Spindles adjustable for zero diameter 140 mm max. - of tools 112 mm min. - Zero height: 10 mm - Spindle diameter: 50 mm diameter - Spindle usable length: 320 mm - Vertical stroke pneumatically fixed, - suitable for 4 tool sets of 80 mm each, 3 x 80 mm - Horizontal stroke pneumatic: 80 mm - Chip e...