Used Window Manufacturing for sale (43,100)

Condition: used, Tenoning spindle 1 St Number of milling agregates 4 St. Spindle diameter 50 mm Control Weinig, PC-Nexus Weinig Unicontrol 10 CNC - Spindles radially and axially CNC-controlled ----- The machine was factory overhauled by Weinig in 2024. The control system was also upgraded to a Siemens S 7 677 C, with a new membrane panel "Touch". With the following machining units: Crosscut saw ----- with laser alignment light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 Axially adjustable via NC axis Radial pneumatic adjustment to 8 positions for edge rounding from above Unit from below for edge rounding ----- Axially adjustable with crosscut saw Tenon and slotting spindle ----- Motor power 15 kW Spindle diameter 50 mm Spindle speed 2,925 rpm Tool travel radius min. 380, max. 400 mm Tool clamping length 640 mm Axially adjustable CNC axis Axially adjustable travel 580 mm Adjustment speed 100 mm/sec. 1. Profile spindle (up- and down-rotation) ----- Motor power 11 kW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axially and radially adjustable via CNC axis 2. Profile spindle ----- Motor power 11 kW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axially and radially adjustable via CNC axis Lsdpoxpi Dujfx Ad Njrg Profile milling unit horizontally mounted on top ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 9,000 rpm Pneumatically adjustable to 8 axial and radial positions Profile milling unit vertically mounted on the right side Machine end ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 5,850 rpm Pneumatic adjustment to 8 axial and radial positions Additional accessories ----- CNC-controlled length stop, mounted on the slotting table for lengths up to 3,500 mm, including a positioned cross-cutting saw integrated into the control system. Studio window device, pivots 60° on both sides Double-part package with automatic separation and transfer Synchronization device with automatic window rebating Rebating carriage for rebating small sash widths Air conditioning unit in the control cabinet PC control NEXUS Automatic turning system Slat conveyor, including conveyor belt for returning the workpieces to the operator (Technical specifications according to the manufacturer - without guarantee).

Condition: used, Year of construction: 1993, functionality: fully functional, For sale is a Weimer UPHS pallet stacking machine with roller conveyor for discharge and a corner saw. Pallet size min.–max. X/Y: 600 mm–1600 mm / 500 mm–1500 mm. Production output approx. 8 pallets per minute. Swiveling gripper arm, 90°. Swivel and lifting axes each equipped with servomotors. Mechanical adjustment via scale. Documentation available. Inspection is possible, machines are currently in storage. Ljdpfx Ajxu Huhsd Nsrg

Year of construction: 1998, condition: excellent (used), I sell the window production set: 1pc. tenoning profiling centre Weinig Unitec 10 1pc. profiling automat centre Weinig Univar 10 Year 1998. Moulding heads OERTLI. Available immediately. Ledpfx Adsfzzhye Nsrg Total price 17.000 euro. Condition very good !

Year of construction: 1998, condition: excellent (used), I sell the window profiling automat centre Weinig Univar 10 Year 1998. Moulding heads OERTLI. Ledpfxsfzzhrs Ad Nerg Available immediately. Unit price 8.500 euro. 4 pcs. available. Condition very good !

Year of construction: 1997, condition: excellent (used), I sell the complete window profile production line: 1pc. 5-spindle fourside moulder with saw aggregate Weinig Unimat 23EL. - without HESS sanding machine - another machine for change available on agreement 2pcs. tenoning profiling centre Weinig Unitec 10 Lredpfxjfzzids Ad Nsg 2pcs. profiling automat centre Weinig Univar 10 1pc. CNC drilling machine KOCH WinDoor - set of complete Weinig automation feeders and conveyors Year 1997. Profile heads OERTLI. Available immediately. Uninstalled and loaded on original Pallets. Condition very good !

Year of construction: 1998, condition: excellent (used), I sell the window tenoning profiling centre Weinig Unitec 10 Lredpfx Adsfzzhke Nsg Year 1998. Moulding heads OERTLI. Available immediately. Unit price 8.500 euro. 3 pcs. available. Condition very good !

Condition: like new (used), Year of construction: 2012, I sell the wooden window assembly table OMGA BA825 (+A+U). Year 2012 All complete. Very good condition. Available immediately. Lsdpfx Adet Ndz Ue Njrg

Year of construction: 2010, condition: excellent (used), I sell the window prodution sets of tools suitable for CNC window angular profiling centres: LEUT Wood-Alu 110mm Lrjdpog Tumyofx Ad Njg Hole 50mm. All complete. Very good condition. Available as a set. Possible to buy also separately.

Year of construction: 2012, condition: ready for operation (used), A Roll-o-Matic bag production line for bottom-sealed film bags is available. Bag length range: 360mm-1800mm, max. bag width: 860mm, max. production speed: 90m/min, max. cycle rate: 230/min, material: PE LD/PP, max. film thickness: 70µm. Machine dimensions: approx. 4100mm/1600mm/1700mm, weight: approx. 1600kg, control system: Siemens PLC. Documentation available. On-site inspection possible. Lredpfx Adexrf I Us Neg

Condition: good (used), Year of construction: 2018, operating hours: 1,358 h, load capacity: 2,000 kg, fuel type: electric, empty load weight: 800 kg, mileage: 1,358 km, This electric ride-on pallet truck from STILL is from 2018; ONLY 1,358 hours on the clock; The pallet truck has a capacity of 2,000 kg; The 2018 battery is equipped with an automatic filling system and an EXTERNAL charger; Schedule an appointment for a test drive. Ledpfx Adjxg Hp Nj Norg

Year of construction: 2018, operating hours: 50 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: F110, The Horizon 350 Autodrive Vacuum Lifter is an innovative lifting device for glass, windows, and other smooth panels, enabling safe transport, lifting, transferring, as well as tilting of large glass panels/sheets and windows to horizontal level in production halls and warehouses. It allows one person to unload, rotate, and tilt large glass panes. Ideal for window glazing—both vertical and horizontal. Capable of lifting glazed windows even from a horizontal position. The device has a lifting capacity of up to 350 kg and can tilt glass panels (max dimensions 2440 mm x 3660 mm) by 90°. The device has only been used for several hours in total. The listed price is net; VAT invoice can be issued. Lodpfjxq D D Eex Ad Norg

Condition: new, max. workpiece length 3200,5100 mm profile spindle 1 Stück main drive 12 kW Control Beckhoff CNC Number of axles 5 St. Masterwood Project 385 CNC-Bearbeitungszentrum ----- 5-Achs CNC-Bearbeitungszentrum in Portalbauweise zum Einsatz für Rundbogenfenster, Türen, Pfosten-Riegel, Innenausbau, Treppen Kurze Zusammenfassung: ----- Arbeitsbereich: X = 3200 mm (Optional 5100 mm) ; Y = 1500 mm; Z = 200 mm 1 Stk. 5-Achs-Hochleistungsspindel, 12 kW, mit HSK 63 F Aufnahme 1 Stk. fest installierter Bohrkopf mit 19 Spindeln mit 7 einzeln abrufbaren Vertikalbohrspindeln X-Richtung mit 6 einzeln abrufbaren Vertikalbohrspindeln Y-Richtung mit 2 doppelten Horizontalbohrspindeln X-Richtung und 1 doppelte Horizontalbohrspindel in Y-Richtung Sägeaggregat in Bohrkopf integriert 27 Werkzeugwechselplätze: Karussellwerkzeugwechsler mit 22 Plätzen und 102 mm Rasterabstand lineares 5-fach Werkzeugmagazin für große WKZ-Durchmesser Konsolentisch mit 6 Traversen Werkstückanhebevorrichtung 6 Stk. spezielle Spanner für runde Fenster- und Türenelemente 24 Stk. Vakuummspanner für Platten und Innenausbau 1 Stk. Vakuumpumpe 100m3/h 1 Stk. Spänetransportband 1 Stk. Fernbedienung Konstruktions-Software Masterwork: 2D-Wop für Standardanwendung Plattenbearbeitung/Innenausbau, Rundbogen, Türen Master 3D Stufe 2: für komplexere Bearbeitungen, optional auch erweiterbar für 5-Achs voll interpolierend Fracht und Montage innerhalb Deutschland Technik und Dienstleistungen gemäß beiliegender ausführliche Beschreibung ----- Gesamtpreis in dieser Ausführung: auf Anfrage! ----- Optionen mit Mehrpreisen: ----- Arbeitslänge 5.100 mm anstelle 3.200 mm Lrsdpfed N Rt Tjx Ad Neg inklusive Erhöhung Konsolenanzahl und Spannmittel Mehrpreis: 7.500,00 Euro zzgl. MwSt. Zusätzlicher Karussellwerkzeugwechsler mit 16 Plätzen und 102 mm Rasterabstand Mehrpreis: 6.500,00 Euro zzgl. MwSt. Ausführliche Beschreibung siehe PDF anbei. Mehr Optionen auf Anfrage! (technische Angaben laut Hersteller- ohne Gewähr!)

Condition: new, max. workpiece length 3200/5100 mm profile spindle 1 Stück main drive 12 kW Lodod Rhd Repfx Ad Nerg Control Beckhoff CNC Number of axles 5 St.

Condition: used, Year of construction: 2009, max. workpiece length 4500 mm profile spindle 1 Stück main drive 20 kW Control Siemens Weinig Conturex 2 C 114 ----- Working width: 40-260 mm Working height: 25-110 mm 2 x PowerGrip clamp tables, 2 x 2280 mm ----- Workpiece length 200 - 4,500 mm Workpieces over 2,700 mm in length are machined using a repositioning cycle. Main spindle 1: ----- Motor with brake 20 kW HSK 63F Electronically adjustable speed 2,000-18,000 rpm Maximum tool length from flat surface HSK 63 F: 290 mm With C-axis Tool magazine: ----- Number of pockets: 30 mm Pitch between pockets: 100 mm Lodpfowunwysx Ad Nsrg Permanently installed multi-spindle drilling head ----- For horizontal and vertical drilling and milling work without tool changes ----- Price ex-site Prices for disassembly and loading onto customer trucks Transport within Germany and abroad as well as reassembly Commissioning and, if required, new profiles are available upon request! Used tools included (drawings available upon request): ----- Wood: IV 68, 78, 88, opening inside and out, with hinged weatherboard Wood-aluminum: IV 68/68, 78/78, 87/68, 97/78 Lift-and-slide doors IV 68 and 78 Front doors IV 68 and 78 Pivot windows Corner connection: counter/dowel Technical specifications according to the manufacturer - no guarantee! Detailed technical description available upon request!

Condition: new, Manual hand unit Nein J/N Automatic for single pieces Ja J/N Automatic for frames Nein J/N Clip set "351" on the loose item ----- Manufacturer description: - Base frame in stable welded construction - Clip container as tipping conveyor with separation and feeding the clips - Screwdriver with tipping conveyor for the screws to be separated, feed screwdriver pneumatic with depth adjustment - Conveyor belt length approx. 4,000 mm as NC axis - Contact and clamping cylinder - Electro-pneumatic control via PLC It can programs with different Initial and distance dimensions can be entered - Workflow automatically in flow ----- Technical specifications: - Screw height 50-120 mm - Profile length 350-3,500 mm - Table height approx. 950 mm ----- Total price of the machine ex works: on request! Freight costs within Germany: on request ! Installation, commissioning and instruction within Germany: on request ! ----- Lodpekx Stnsfx Ad Njrg Video shows version with extra infeed belt and outfeed belt with pusher. Not included in the basic price. Can be offered as an option if required. (technical data according to the manufacturer without guarantee!)

Condition: new, max. workpiece length 4400 mm profile spindle 1 Stück main drive 19,2 kW CNC machining center MASTERWOOD 4 WIN with automatic loading and unloading ----- Specially designed for a rational and flexible wooden window u. door production HIGHLIGHTS: - Various tool magazines for optimal tooling - Simultaneous feeding with up to 6 workpieces - patented clamping system for optimum machining of workpieces - CNC controlled work table with automatic positioning of the beams and Stretcher - Automatic reclamping for changing between external and internal profiling - INTEGRATED windowing software, i. Machine does not have to (but can Of course) be controlled from the office with external industry software. - powerful engine with 19.2 kW HSK-63 E - Loading and unloading conveyor Ask for a quote and see for yourself unbeatable value for money! VIDEO from the machine attached! At the side you will find the techn. Description of the machine as a PDF document. We would be happy to make your used machine one take reasonable price in payment! Lrsdpfx Asd Nv Dcjd Njg (technical information according to the manufacturer - without guarantee!)

Condition: used, Length 2700 mm Width 1100 mm Height 850 +- 150 mm engine output 0,37 kW Electric capacity 0,5 kw compressed air 6 bar Horizontal impregnation system 'Pro flow' for individual parts with rinsing circuit. ----- Features: Machine for horizontal flooding of individual parts. The product will go through flooded a row of nozzles. The excess product is then removed through air jets blown off. The pump and the air nozzles are controlled automatically and only then operated when the workpiece passes through. In this way the Compressed air consumption reduced. The circulation operation ensures minimal product consumption. ----- Construction features: structure Sturdy steel frame, painted with high-strength, water-soluble products. Machine body made of heat-sealed, thick polypropylene plates. 4 independent chambers for inlet, flooding, blow-off and outlet. Horizontal feed of the workpieces By motor-driven rollers made of plastic with grooves. Electrical converter for controlling and changing the conveying speed. transmission The machine is equipped with an exclusive system so that all Gear located outside the flood chamber and easily accessible to the Operators are to guarantee a longer service life and the to facilitate maintenance operations. The moving components are protected by cover plates and appropriate seals protected. circulation pump Pneumatic double diaphragm pump made with valves, seals and diaphragms Nitrile rubber and housing made of plastic material (PVDF). air jets A blow-off system is present in the first chamber to prevent product leakage avoid. A second blow-off system after the flood chamber blows off the excess product from the workpiece. Electrical panel According to CE, degree of protection IP 55. Including inverter to the set feed rate. technical features Length mm 2700 Width mm 1100 Conveyor speed (min./max.) m/min 3-6 Motor power train group kW 0.37 Installed electrical power kW 0.5 Distance between infeed and outfeed rollers mm 2520 Working height (adjustable) mm 850 +- 150 Min. length of the workpieces to be flooded mm 250 Max. width of the workpieces to be flooded mm 300 Max. height of the workpieces to be flooded mm 250 Compressed air consumption lt/min 2000 Pressure of the required compressed air bar 6 Equipment and available accessories Flushing circuit for Pro Flow ----- Price of the above machine: on request! plus packaging and transport ----- (Technical information according to the manufacturer - without guarantee! Lsdpfx Adsnl Nqqe Norg Illustrations may be dated Deviate from the original, prices net, plus VAT (domestic))

Condition: used, Tenoning spindle 1 St. Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig, PC-Nexus # 2774 Weinig Unicontrol 6 with NC spindles Machine will be cleaned and completely checked before delivery ----- Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3 kW > Radial adjustment path pneumatically controlled to 8 positions, e.g. for edge rounding from above > Laser aiming light for detecting the saw section Item 2: Rounding unit horizontal below ----- > Position: horizontal below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length 25 mm > Spindle speed: 9,000 rpm > Max. tool flight circle: 130 mm > Axial adjustment path mechanically coupled with Crosscut saw > Adjustment path radial pneumatically controlled on/off Length stop NC controlled ----- > Length 3500 mm > Electronic length stop Item 3: Tenon and slot spindle ----- > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, stepless adjustment, NC-controlled > Spindle speed: 3500 rpm > Tool flight circle max. 320 mm > Spindle diameter: 50 mm > Tool diameter max.: 320 mm > Motor power: 11 kW Item 4: 1. Profiling spindle (same and opposite rotation) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 7.5 kW Item 5: 2nd profiling spindle ----- > Position: vertical right Lredpfxevu Hghs Ad Nsg > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, stepless adjustment, NC-controlled > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers axially pneumatic opposite the spindle controlled, 2 positions Rung guide consisting of: Guide ruler in the stop (area of ??the synchronous spindle), Rung support bar from above in the area of ??the profile milling unit vertically on the right and profiling spindle. Pos. 6: Profile milling unit horizontal top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??9,000 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 8 positions > Radial adjustment range 125 mm, 8 positions Pos. 7: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions > Radial adjustment range 110 mm, 8-way turret > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 210 mm > Motor power: 3.0 kW Item 8: Profile milling unit/grooving unit from below ----- > Motor power: 3.0 kW > Tool clamping length: 125 mm > Axial adjustment range 100 mm, 8 positions > Radial adjustment range 1...

Condition: used, max. workpiece length 4400 mm profile spindle 1 Stück main drive 19,2 kW Control Beckhoff CNC machining center MASTERWOOD 4 WIN ----- Specially designed for a rational and flexible wooden window u. door production HIGHLIGHTS: - Different tool magazines for optimal tool loading - Simultaneous loading of 4 workpieces - Patented clamping system for optimal processing of the workpieces - CNC controlled work table with automatic positioning of beams and Stretcher - Automatic re-clamping for changing between external and internal profiling - INTEGRATED window construction software, i.e. the machine does not have to (but can of course) can be controlled from the office with external industry software. - strong motor with 19.2 kW HSK-63 E Lrodet Tqxzjpfx Ad Njg Please note that this stock machine is with us in Oberkochen and is already equipped with many useful options. Tools available at short notice on request! Request an offer and see for yourself unbeatable value for money! VIDEO of the machine on request! Below you will find the technical Description of the machine as a PDF document. We would be happy to sell your used machine to a pay a reasonable price! Suitable stationary or mobile suction on request! (see e.g. #5674 NESTRO NE 300) Suitable compressor on request! (#5997 Kaeser Aircenter SM 15) (technical information according to the manufacturer - without guarantee!)

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm control Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----- Machine will be cleaned and completely checked before delivery Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw ----- > Electronic cross-cut saw, infinitely adjustable horizontally > Number of tools: 1 piece > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser aiming light for detecting the saw section > NC length stop, mounted on slot table included Positioning of the cross-cut saw integrated in the control system. > Length 3500 mm Item 2: tenoning spindle ----- > Number of tools: variable, infinitely variable adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable adjustment 254 mm NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Item 3: 1st profiling spindle (synchronous spindle and counter-rotation) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool flight circle: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, infinitely variable adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable adjustment 254 mm NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Rung guide consisting of: Guide ruler in the stop (area of ??synchronous spindle), Rung support bar from above in the area of ??profile milling unit vertical right and profiling spindle. Pos. 5: Profile milling unit horizontal top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??5,850 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 8 positions using pneumatic turret > Radial adjustment range 125 mm, 8 positions using pneumatic turret Lredpsvu Hfqefx Ad Nog Pos. 6: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions using pneumatic turret > Radial adjustment range 100 mm, 8 positions using pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool flight circle: 210 mm > Motor power: 3.0 kW Other features ----- > online-capable > rebating device for tear-free rebating > double parts package > return conveyor for 1-man operation: tilting belt > screen control > inclined window device > electronic angle display for inclined windows > industrial PC, PC control/NEXUS > Weinig type production program > without processing tools No original images available yet. Images show identical machines from our archive. ----- Price of the above-mentioned machine upon request! ----- Optional with additional charge: EUR 6.500,00 Note on used tools: We currently ha...

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 13688, Year of construction: 2012, empty load weight: 4,990 kg, Fully automated, horizontal production line for IGUs and spacer frames! Production capacity of 1200 units per shift! TECHNICAL DETAILS Production capacity: 150 units/h MACHINE DETAILS Ljdpfjxdibpjx Ad Nsrg Electrical Data Voltage: 480 VAC Frequency: 50/60 Hz Phases: 3 Maximum motor capacity: 2 A Short-circuit current: 5,000 A Power: 142 kVA Machine weight: 4,990 kg EQUIPMENT GED Intercept Ultra/Thin Spacer Frame Machine i-3 - CE version Warm-edge spacer manufacturing system Production of Intercept ULTRA stainless steel, ThinPlate, or BlackLine Note: The machine is available from 02/12/2025!

Year of construction: 2007, condition: ready for operation (used), A glass and carbon roving production line (reinforcement mesh) Wilhelm Kneitz for the construction industry is available. 1) 3D production system consisting of two combined knitting machines Karl Mayer DG 6-30 2HS ELS, year of manufacture: 2007, working width: 2133.6mm, production capacity: approx. 800m²/8h, dimensions X/Y: approx. 8000mm/15000mm, weight: approx. 2600kg. 2) 2D production system consisting of one knitting machine Karl Mayer Cop HS 2-ST HG, gauge: 1/6inch, year of manufacture: 2012, working width: 2540mm, max. possible working width: 3505.2mm, dimensions X/Y: approx. 5500mm/8000mm, installation area X/Y: approx. 14000mm/18000mm. 3) Sample unit Karl Mayer Malimo 14022/PS-S2, year of manufacture: 1998, gauge: 1/6inch, optional gauge: 1/12inch, max. working width: 1270mm, installation area X/Y: 4000mm/6000mm, speed: approx. 800rpm. Documentation available. An on-site inspection is possible. Lrodexpw Tdopfx Ad Nog

Condition: good (used), Year of construction: 1980, max. pallet size 120 x 165 cm 20 nail guides Lrjdpfxoxpi N Rj Ad Nog year of manufacture 1980, still in good condition

Year of construction: 2023, condition: new, Please contact us for more information. Lsdpfx Aen Tm Utod Norg

Year of construction: 2022, condition: new, Please contact us for more information. Lodpfx Aspa Rqved Nerg