Used Welded Beam for sale (9,610)

Condition: excellent (used), Year of construction: 2019, operating hours: 100 h, functionality: fully functional, arm reach: 2,890 mm, type of input current: three-phase, load capacity: 6 kg, type of cooling: air, Equipment: cabin, On behalf of a client, we are selling a used Easy Arc 01 welding robot cell from OTC Daihen. The welding robot cell was used to a limited extent for training purposes for vocational school students and future operators of welding robots. In total, the system has approximately 100 operating hours. The system was purchased in November 2019 and put into operation in 2020. It has been idle for 3 years, which is why it is now being sold. Due to the low operating hours spread over the years, the system is still in very good condition, almost like new. Dsdezkanaepfx Aahouw The Easy Arc was developed by OTC Daihen as an entry-level solution for welding automation. The highly precise welding robot and the already integrated welding table ensure efficient welding production. The compact design facilitates transportation. In addition, the low assembly effort enables a quick start of production. The Easy Arc 01 consists of the following components: - OTC welding robot, type FD-B6: 6-axis articulated arm robot with a load capacity of 6 kg, including robot controller, type FD-11, and touchscreen control panel - OTC MIG/MAG welding system, type Welbee WB-P400: 400A inverter pulsed welding power source with integrated robot interface - OTC torch, type RT3500H: Robot welding torch (45°) with safety forced stop and 4-roll wire feed system, max. output 350A, gas-cooled, collision protection type B integrated - Siegmund welding table: 2000x1200mm and insertion height 950mm, load capacity 3,200kg, 28mm hole pattern with 100x100mm hole grid for accommodating appropriate clamping technology - OTC safety system: Sturdy safety enclosure including dual-channel monitored material gate and "Robot Monitoring Unit (RMU)". The use of RMU ensures that compliance with the predefined working area of the robot according to Performance Level PLd is guaranteed. The system is CE-compliant (as well as compliant with UVV / VDI / DIN) and can be connected to any standard 32A three-phase power outlet due to an integrated residual current circuit breaker (type B). Further technical data: - Positioning accuracy: +/- 0.08mm - Maximum working area in the P-point: Ø2890mm - Memory capacity of the robot controller, type FD-11: 9999 programs - Communication between the robot controller and the welding system via digital CAN-BUS - Welding power source Welbee WB-P400: Output current range 30-400A, output voltage 12-34V, duty cycle 280A/100%, digital inverter technology with high arc stability over the entire current range The system is delivered including extensive accessories (see picture) for steel and aluminum. In addition, an extraction hood is included in the scope of delivery. The Easy Arc is currently still at the customer's site and is no longer in operation. An inspection may be possible after prior arrangement. Transport must be organized by the buyer; loading will be done on-site. If you have any further questions, please do not hesitate to contact us.

Condition: used, Year of construction: 2015, functionality: fully functional, A set of Kemppi welding machines available for sale as a complete set or individually. (also includes Migatronic PILOT 2400 and PI 250) The welding machines come from a welding training program. You are welcome to inspect them at our location in Chemnitz. - Kemppi ProMig 530 incl. Pro4200 and ProCool 30 Dedpfx Aaozkaikohjuw Double Pulse MIG/MAG, 420 Amps MXE control panel for welding aluminum, stainless steel and steel, synergistically controlled, with the option to save programs, electrode welding, pulse operation, dual pulse operation - Kemppi ACDC MasterTig 3500 Three-phase TIG welding machine, both AC and DC Electrode welding (MMA) with integrated cooling unit - Kemppi ACDC MasterTig 2500 - Kemppi MasterTig MLS 2300 (2x) - Kemppi MasterTig MLS 3500

Condition: excellent (used), Year of construction: 2021, operating hours: 157 h, functionality: fully functional, machine/vehicle number: 20029618, type of input current: DC, input voltage: 230 V, type of cooling: water, laser power: 1,000 W, input frequency: 50 Hz, laser wavelength: 1,070 nm, Used Fanuci LW-PRO-F01 laser welding machine Duodpfszi Spgex Aahjw Power: 1000 W Year of manufacture: 2021 Only 157 hours of welding time Used, fully functional, recently serviced, complete with accessories (nozzles, lenses, etc.) Includes wire feeder.

Condition: new, Year of construction: 2024, functionality: fully functional, load capacity: 680 kg, total height: 910 mm, total length: 1,200 mm, total width: 750 mm, table height: 910 mm, table width: 75 mm, overall weight: 195 kg, table load: 680 kg, table length: 1,200 mm, working height: 910 mm, The Rhino Cart® mobile clamping station is a turnkey system for clamping and clamping when welding and fabrication. Clamping and clamping at any point on the reversible, flat ground, nitrided (heat-treated) 1200 x 750 mm table top for accuracy in all your setups. Be ready for any job with the Rhino Cart® package, including: the Rhino Cart® welding table + fixture kit. Welding table (TDQ612075) + 66 pcs. + fixture kit (TDK6100) Fast clamping and clamping at any point on the surface. Accurately set stock for each new project. Table top reversible and is splash and rust resistant. Lockable wheels +set feet for mobile or stationary use. Rhino shelves, racks, and pegboard keep your fixture tools organized and within easy reach! Price excluding VAT excluding shipping: €1950. Price including VAT excluding shipping: €2359,50 Dujdpfx Aaotizfashsw

Condition: used, current intensivity 1,2 / 0,5 A wire dia. 0,8 - 1,6 mm IP protection class IP 43 dimensions 250x210x190 mm speed 1 - 25 m/min weight ca.7,2 kg High-precision wire feeder for automated MIG/MAG robotic applications, optimized for use with the i-Series digital power sources 4-roller drive for constant wire feed Mains voltage tolerance: +/-10% Current consumption: 1.2 A / 0.5 A Fuse: 3.15 A slow-blow Type A residual current device Duedpfxozhxmce Aahow Wire speed: 1–25 m/min Rotary drive: 4-roller drive Wire diameter: 0.8–1.6 mm Quick and secure connection of hose assemblies using the Dronius System Connector FSC Only 2 left in stock! PLEASE NOTE: Only the wire feeder is sold here—not a welding machine! Translated with (free version)

Condition: good (used), WEINIG HYDROMAT H-23 10 SPINDLE MACHINE WITH TILT BEAM SHORT INFEED TABLE 1: BOTTOM 7,5KW 2: RIGHT 11 KW 3: LEFT 11 KW 4: RIGHT 11 KW 30° TILTABLE 5: LEFT 11 KW 6: TOP 11 KW 7: BOTTOM 11 KW 8: TOP 11 KW 9: BOTTOM 11 KW 10: UNIVERSAL 11 KW 360° TILTABLE 80 M/MIN+ ELECTRIC. FEED 14 x DRIVEN TOP FEED ROLLERS 7 x DRIVEN BED FEED ROLLERS AUTOM. BED LUBRICATION PNEUM. POWERED SIDE PRESSURE ROLLERS PNEUM. POWERED HOLD DOWN ON 7+9 DIMENSION: APPR 5400 X 2000 X 1800 MM WEIGHT: APPR. 7500 KGS Dusdoycvfmspfx Aahow DUSTHOODS: 10 x 140 MM DIAMETER SOUND ENCLOSURE ROOM INCLUDED

Condition: excellent (used), Pressure beam saw PANHANS ECOPAN -used- PC control with optimization, scoring unit, automatic cut length detection, side pressure device, air cushion tables, movable tables, infinitely variable feed rate of the saw carriage, label printer ----- Technical Data ----- Cutting length: 4,200 mm, Cutting width: 4,200 mm, Max. cutting height: 72 mm, Number of clamps: 6 pcs, Feed rate saw unit max.: 100 m/min, Feed rate for width stop max.: 80 m/min, Main saw motor power: 11 kW, Scoring saw motor power: 1.5 kW, Main saw blade Ø: 300 x 30 mm, Scoring saw blade Ø: 180 x 30 mm, Extraction port Ø bottom: 140 mm, Extraction port Ø on pressure beam: 3x100 mm, Airflow volume: 5,000 m³/h, Compressed air connection: 6 bar, Dodpfx Aaoyrqrteheuw Air consumption: 140 l/min, Nominal current: 38 A, Max. circuit breaker: 50 A Quality information: - complete basic inspection - complete basic cleaning - Electrics checked - immediately ready for operation

Condition: excellent (used), Panel saw HOLZ-HER Cut 70 6110 - used - PC control with optimization, scorer, automatic cut length detection, side pressing device, air cushion tables, infinitely variable feed of the saw carriage, touchscreen, label printer ----- Technical data ----- Cutting length: 3900 mm, Cutting width: 3100 mm, max. cutting height: 70 mm, Number of clamping devices: 6 pieces, Feed rate saw unit max.: 0-70 m/min., Feed rate width guide max.: 25/70 m/min., Motor power main saw: 11 kW, Motor power scorer: 1.1 kW, Saw blade main saw Ø: 350 mm, Saw blade scoring saw Ø: 180 mm, Extraction port Ø bottom: 120 mm, Extraction port Ø on the pressure beam: 3 x 120 mm, max. fuse rating: 35 A, Rated current of the largest consumer: 20.6 A Quality information: - Saw spindle newly bearinged - Scorer newly bearinged - complete basic inspection - complete basic cleaning - electrical system checked Dodpsyu N Rgjfx Aahsuw - ready for immediate use

Condition: like new (used), functionality: fully functional, Gate Valve, 16" CL1500 SCH 80, Neway, Stainless Steel, Butt-Weld Ends (Unused) ASTM A182 F316 / A351 CF8M stainless steel body CL1500, butt-weld ends Duedpezhmzzsfx Aahjw MESC 7724132191

Condition: ready for operation (used), Year of construction: 2004, number of axes: 6, Welding robot manufactured in 2004. This ABB IRB 2400L Welding Cell features a robust design with a positioner model ABB IRB 500R and includes Fronius TPS 4000 welding equipment. It comes equipped with essential safety features such as a light curtain and safety fencing. If you are looking to get high-quality welding capabilities, consider the ABB IRB 2400L Welding Cell we have for sale. Contact us for further details. Dujdjzhmryepfx Aahsw - Industrial Robot Model: ABB IRB 2400L- Positioner Model: ABB IRB 500R- Welding Equipment: Fronius TPS 4000- Supply Voltage: 3x400V/PE/N- Cable Cross-section: 5 x 16 mm²- Fuse Protection: 63 A delayed- Compressed Air Requirements: 6 bar, G1/2"- Robot Control Cabinet: Included- Machine Sequence Control Cabinet: Included- Robot Base Height: 800 mm- Safety Equipment: Light curtain, safety fencing, glare protection partition wall, service door (monitored by ABB), rear access protection (mechanical, h=1100mm)- Maintenance Units: Torch cleaning system, TCP Calibration unit- Control Stations: Main start panel, Pre-Reset button- Footprint Dimensions: Approx. 8025 mm (length) x 5500 mm (width)- Center-to-center distance: 2000 mm x 1200 mm turning circle- Load capacity: 500 kg per side of the table / Maximum load difference: 350 kg- machine hours: 68.107h

Condition: good (used), Inert gas welding device, inert gas device -Max. Welding power: 340 A. Dedpfxsb Hiy So Aahjuw -4 roller drive -Water-cooled -Incl. Ground cable -with removable wire feeder -Hose package length: 4000 mm -Dimensions: 1100/515/H1170 mm -Weight: 214 kg

Condition: good (used), Stick electrodes 4.0 x 350 -Type: Fincord -Price: per package -Number: 4 packages available -Weight per package: 4.3 kg Dsdpfod Ivn Sox Aahsuw

Condition: good (used), Welding rail -from: Röschermatic VM-19/S/CE vacuum unit -Length: 495/90/H 160 mm Dujdpfxod I H Szs Aahjw -Weight: 1.5 kg

Condition: good (used), Inert gas welding machine with pulse function, pulse-arc welding system, MIG/MAG pulse welding system -with: 3 hose packages (1x aluminum, 1x stainless steel, 1x steel) -Max. welding power: 330 A -Equipment: remote control connection, with removable wire feed, including ground cable, gas fitting -Wire feed: 4-roller drive -Cooling: Water-cooled -Dimensions: 655/900/H1490 mm -Weight: 160 kg Dsdpfx Aed I U Dweahouw

Year of construction: 2006, condition: used, Submerged arc welding device, welding accessories, forming gas welding device, longitudinal carriage, chassis, welding carriage, longitudinal carriage, welding machine, welding carriage, inert gas welding device, longitudinal seam welding system, longitudinal seam welding machine, longitudinal seam welding device, rail runner -Submerged arc welding machine without: power source -Submerged arc welding machine type: Minisaf 02 -Control box SUBARC 3 -Intermediate hose package Duedod Nlf Njpfx Aahjw -Equipment -Dimensions: 1200/800/H500 mm -Weight: 215 kg

Condition: good (used), Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper -Span width: 80 - 350 mm -Load capacity: 5000 kg -Dimensions: 410/210/H400 mm -Weight: 15.5 kg Djdpfx Ajd N Rt Roaheuw

Condition: used, Spot welder, spot welding machine, spot welding machine, spot welding tongs, spot welding machine, projection welding machine, projection welding machine -Manufacturer: Aro, projection welding machine, spot welding machine, water-cooled, type N601 -Welding power: 65 kVA -Welding control: Aro 25-002-2 -Transport dimensions: 1000/510/H1720 mm -Weight: 538 kg Dodpfxehx E T Uo Aahsuw

Condition: excellent (used), Wire electrode, aluminum welding wire, aluminum welding rod made of aluminum-magnesium alloy -Net weight: 7 kg -Quantity: 1 package available Dujdpfocbkklex Aahow -Total weight: 7.6 kg

Condition: good (used), Pipe welding accessories, forming gas welding equipment, forming gas welding aid -Diameter: 600 mm -Rubber sealing lip -with transport rollers for disassembly from the pipe to be welded Duedsb A N Apspfx Aahow -Dimensions: 650 x 450 mm -Weight: 18 kg

Condition: good (used), Wire electrode, welding wire, welding wire -Material: stainless steel -Welding wire: 307 -Diameter: 0.8 mm -Quantity: 1 roll 15 kg 1 roll approx. 5 kg Duedpfxjfnr Ito Aahow -Price: complete -Dimensions: Ø 300/100 mm -Weight: approx. 21 kg

Condition: used, Stick electrodes 4.0 x 350 Dujdsd Elvqopfx Aahew -Type: FOX DMO Kb -Price: per package -Number: 7 packages available -Weight per package: 4.6 kg

Condition: good (used), Stick electrodes 4.0 x 450 -Type: FOX EV 50 -Analysis: C .07 Si 0.5. Mn 1.1% -Price: per package -Number: 17 packages available Duodpfx Asd Elvzeahjw -Weight per package: 5.8 kg

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Manufacturer: Dukane, Ultrasonic welding transducer, Ultrasonic vibration unit -Welding converter: Type 41B30 92420 353324 -Horn: Type CTC205789 -Ultrasonic sonotrode: -Quantity: 1x ultrasound transducer available -Dimensions: 450/110/H83 mm -Weight: 4.6 kg Djdsxywfnspfx Aahjuw

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Manufacturer: Dukane, Ultrasonic welding transducer, Ultrasonic vibration unit -Welding converter: Type 41B30 93420 356075 -Horn: Type CTC205782 Dujdpfx Aajxywi Tehow -Ultrasonic sonotrode: -Quantity: 1x ultrasound transducer available -Dimensions: 450/110/H83 mm -Weight: 4.6 kg

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode Djdpfjyxm Hnex Aahjuw -Manufacturer: Herrmann, Ultrasonic welding transducer, ultrasonic vibration unit -Welding transformer: Type KHS20-IP50-L -Horn/Ultrasonic Sonotrode: Type 400 see photos -Number: 3x ultrasound transducer units available -Price: per piece -Dimensions: 450/100/H145 mm -Weight: 15.7 kg