Used Weinig Unimat 500 Profi for sale (480)

Year of construction: 2002, condition: good (used), Weinig Unimat 23 EL four side planer - machine in stock - German production - year of production 2002 - DTR TECHNICAL SPECIFICATIONS: - planing width 230 mm - planing height 170 mm - feed adjustable on the inverter 6-26 m / min - spindle diameter 40 mm 1 lower spindle 7.5 kW 2 right spindle 7.5 kW 3 left spindle 7.5 kW 4 upper spindle 7.5 kW 5 lower spindle 7.5 kW 6 upper spindle 7.5 kW Knedpehhyr Asfx Affjf - 4 kW feed motor power - feed on cardan shafts - pneumatic pressure - five top steel rollers - four upper rubber rollers - electric height adjustment - diameter of the stub pipe 140 mm - central lubrication - length of the top 1980 mm Machine dimensions: - length 520 cm - width 210 cm - height 210 cm - weight 4000 kg

Condition: excellent (used), Weinig Unimat 23 EL four-sided planer Kjdperb An Usfx Affonf Working width 230mm Working height 160mm Head arrangement: Bottom 5.5kw Right 4kw Left 5.5kw Right 4kw Top 11kw Bottom 5.5kw Top 7.5kw Bottom 7.5kw Feed speed adjustable on variator 6-36m/min Feed driven by cardan shaft Rollers driven in table Pneumatic pressure pads CE certificate Year of production 2003

Condition: reconditioned (used), Year of construction: 1985, functionality: fully functional, For sale is a used four-sided planer/moulder from Weinig with 7 spindles and powered infeed roller conveyor. Knedpfxow Rkqgj Affof The machine has been in operation since at least 1985 and was overhauled in the workshop in 2007. It is in working condition but is no longer in use. The exact year of manufacture is unknown; based on its design and equipment, it is likely a Weinig Unimat 17 series machine from the 1980s. Technical data (approximate values): - 7 spindles - Spindle diameter: 40 mm - Working width: approx. 20 – 170 mm - Working height: approx. 8 – 120 mm - Tool diameter: up to approx. 160 mm - Feed speed: 6 – 24 m/min - Voltage: 380 V / 50 Hz - Weight: approx. 4,500 kg - Including powered infeed roller conveyor - Including various cutters (see photo) Note: This is a used, older model machine, being sold without warranty. Inspection by appointment possible.

Condition: good (used), Year of construction: 2015, Used, in good condition Year of construction: August 2015 (installed end of 2016) Technical description Working width (with tool cutting circle 125 mm): 20 - 230 mm Working height (with mould cutting circle 125 mm): 8 - 120 mm Six standard feed pendulums from above Two driven rollers in the machine table 1st spindle First lower horizontal spindle Motor with brake 5.5 kW (7.5 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 125 - 145 mm Folding device, incl. folding cutter 2nd spindle First right vertical spindle 5.5 KW (7.5 HP) Individual motor with brake Diameter: 40 mm Speed: 6000 rpm Tool cutting circle 40 mm below table level: 100 - 200 mm Tool cutting circle 55 mm below table level: 100 - 180 mm Max. Tool diameter behind stop plane 180 mm Maximum moulding depth 35 mm Axial adjustment movement 55 mm 3rd spindle First left vertical spindle Individual motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 40 mm below table level 100 - 200 mm Tool cutting circle 55 mm below table level 100 - 180 mm Maximum moulding depth 35 mm Axial adjustment movement 55 mm 4th spindle First upper horizontal spindle Motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 112 - 200 mm Max. tool cutting circle for straight cutterheads: 180 mm Maximum moulding depth 35 mm Axial adjustment movement 40 mm Divided pressure shoe in front of upper spindle, adjustable to tool cutting circle and swivelling away from the tool, spring-loaded. 5th spindle Second upper horizontal spindle Motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 112 - 200 mm Max. tool cutting circle for straight cutterheads: 180 mm Maximum moulding depth 35 mm Axial adjustment movement 40 mm Divided pressure shoe in front of upper spindle, adjustable to tool cutting circle and swivelling away from the tool, spring-loaded. 6th spindle Knsdpfsqu Sc Hox Affef Second lower horizontal spindle Motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 112 - 200 mm Maximum moulding depth 15 mm Axial adjustment movement 35 mm Spindles in general All moulder spindles dynamically balanced for high concentricity. Feed system Frequency-controlled feed 5 - 30 m/min. infinitely variable with brake 4 KW (5.5 HP) Machine stand, tables and stops Manual lubricant pump for table resin removal Machine operation Memory function For memorising the setting values of profiles. Spindle axes with electronic double displays. Function: - Saves the setting values of the finished profile under a profile number at the touch of a button - When the profile number is selected again, the electronic double displays show the setting values - The displays are synchronised by manually adjusting the spindle - 99 memory locations Electric height adjustment of the feed Centralised position of lubrication points at the front of the machine

Condition: ready for operation (used), Technical characteristics Working width : 20 to 300 mm Working height : 8 to 120 mm Feeding speed 6 to 46 m/min Heavy drive (15 kW) 9 shafts Superior soundproof option Composition : Lower spindle 11 kW, diameter 50 mm Right-hand spindle 11 kW, diameter 40 mm Left-hand spindle 11 kW, diameter 40 mm Upper shaft 11 kW, diameter 50 mm Lower shaft 11 kW, diameter 50 mm Upper shaft 11 kW, diameter 50 mm Lower shaft 11 kW, diameter 50 mm Upper shaft 11 kW, diameter 50 mm Lower shaft 11 kW, diameter 50 mm Machine sold with input mechanization : chain transfer 6000 x 2500 mm Special configuration, ideal for parquet and deck boards Power and Motors Voltage: 400 V Pluging: Three-phased Knedpfx Afjr Av T Hofjf Power: 114 Kw Motor: 9 x 15 CV Overall dimensions Lenght: 5200 mm Width: 2200 mm Height: 1800 mm

Condition: used, Year of construction: 2006, Manufacturer: Weinig Model: Unimat Super 4 Year of manufacture: 2006 Four side planer Manufacturer: WEINIG restored Model: UNIMAT SUPER 4 with mechanization of short workpieces EM15 - Year of manufacture: 2006 Ksdpfx Aoqprk Teffenf Technical specifications - Working width: max 150 mm - Working width: min 25 mm - Working height: max 50 mm - Working height: min 15 mm - Number of spindles: 3 - Power top spindle: 22 kW - Power bottom spindle: 11 kW - Spindle rotation speed: max 1/min 7.000 rpm - Spindle diamete: 40 mm - Table length: 2.000 mm - Feedrate max: 24 m/min - Continuously variable feed - Seperate motor per spindle - Roller infeed Cardanic drive - Infeed from magazine - Motoric adjustment Planing height - Lubrication pump automatic - WEINIG Face-milling cutter - WEINIG EM 15 - Total connection: 45 kW

Condition: like new (used), Year of construction: 2004, WEINIG UNIMAT SUPER 4 planer – German production - very good condition – year of production 2004 – DTR Knodpfx Aoin Nrgoffef TECHNICAL PARAMETERS: planing width 150 mm planing height 50 mm spindle diameter 40 mm equipped with tools upper adjustable head 1) lower head 11 kW 6000 rpm 2) upper head 18.5 kW 7000 rpm 3) lower head 5.5 kW 6000 rpm feed motor 2.2 kW feed adjustable on the inverter 0-18 m/min feed on cardan shafts pneumatic clamp three upper steel-plated pulling rollers one rubber top roller grooved top pre-top length 1950 mm total power 37 kW central lubrication Transport dimensions: length/width/height 320x220x220 cm weight ~ 2700 kg

Condition: excellent (used), Four-side planer Weinig Unimat 17 Working width: 170 mm Working height: 140 mm Number of spindles: 6 Spindle arrangement: Bottom: 5.5 kW Right: 5.5 kW Left: 5.5 kW Top: 7.5 kW Bottom: 5.5 kW Universal: 5.5 kW Adjustable cutter heads Feed speed adjustable via variator 6–36 m/min Drive via cardan shafts Knjdpewtp Nhefx Affjf Feed motor: 5.5 kW Pneumatic material pressure rollers Total power: 41 kW

Year of construction: 1987, condition: excellent (used), working width 170 mm planing height 120 mm table surface length 1950 mm 5 spindles: 1. lower 2. right 3. left 4th top Knodpfx Afelx Em Uefef 5. universal feed speed 6.5 - 49 m/min. cardan feed electrically lifted pressure beam

Condition: good (used), Year of construction: 2004, I sell the fourside moulder Weinig Unimat 300 Feeding speed 5-30 m/min. Working width 230mm Working height 130mm 5 spindles Configuration: bottom - right - left - top - bottom Total power 28kW 3-zone pneumatical pressure Knsdpor Arr Eofx Affof Good condition Fully working! Available immediately Including full documentation and CE certyficate.

Condition: ready for operation (used), Technical characteristics Capacity : 260 x 160 mm Feed rate : 5-30m/min Axial radial and beam adjustment by numerical control Control panel Modem connection 5 POWERLOCK shafts Knsdot Rrc Nopfx Affef Lower planer 15 HP Right spindle moulder 10 HP Left spindle moulder 10 HP Upper planer 15 HP Lower planer 10 HP Power and Motors Voltage: 400 V Pluging: Three-phased Power: 50 Kw Overall dimensions

Condition: excellent (used), working width 250mm working heigth 130mm 6 heads heads set: bottom/right/left/top/top/bottom Knedpfx Asw Afbroffsf toothened roll in the infeed table variable regulated feeder spindles diameter 40mm feeder with cardan pneumatic pressure of feeding rolls two axes heads regulation

Year of construction: 2008, condition: like new (used), Four-side planer Weinig Powermat 500 - year of production 2008 - German production - PowerCom control - saving profiles with tools and positions - PowerLock tool holder TECHNICAL PARAMETERS: planing width 300 mm planing height 200 mm PowerLock tool attachment PowerCom control with positioning of the upper and left spindles 1 spindle 11kW 2 spindle 11 kW 3 spindle 11 kW 4 spindle 15 kW 5 spindle 15 kW milling spindle 1.5 kW 12000 rpm spindle speed 8000 rpm feed continuously adjustable 6-36 m/min feed motor power 4kW five upper steel pulling rollers one rubber upper pulling roller one roller in the top pulling Knsdpfx Ajltla Sjffef air cushion in the table automatic central table lubrication automatic lubrication of spindle guides length of the feeding table 1970 mm spigot diameter 2x140 mm 3x160 mm 1x80 mm total power 70 kW 140 A Machine dimensions 500x225x242 cm weight 3000 kg

Condition: excellent (used), Weinig Unimat 23 four-sided planer Working width 230mm Working height 140mm Number of spindles 7 Arrangement of spindles Bottom 7.5kw Right 7.5kw Left 7.5kw Right 7.5kw Top 7.5kw Bottom 7.5kw Universal 360° 7,5kw ATS control system Knedpfxerup Igo Affjf Corrugated table Pulling rollers in the work table driven Feed on cardan shafts Feed motor 5.5kw Feed speed 6-36m/min Total power 61kw

Condition: reconditioned (used), Year of construction: 1985, functionality: fully functional, 4-sided 8-head planer. Kjdpfx Afevtpk Hjfenf head arrangement: lower horizontal, right vertical, left vertical, upper horizontal, right vertical, lower horizontal, upper horizontal, and the last universal, a new inverter and new cables were installed, smooth feed regulation. The machine has been completely renovated. Weight 4600 kg

Condition: used, Year of construction: 2007, from training workshop, public facility, chrome-plated stops and machine table Knsdpfovwghkox Affef used, top condition, hardly used, top equipment Make Weinig Type Unimat 300 Year of manufacture: 2007 Number of spindles 5 Spindle arrangement u-right-li-o-b Motor brakes Planing width approx. mm 20-230 Planing height approx. mm 8-160 Spindle diameter mm 40 Table length approx. mm 2000 Pre-milling cutter Pneumatic pressure of the rollers Protective cover Table lubrication lubricant pump Feed in front of the planer Feed speed continuously variable 5-30 m/min. Profiling D 125 - 200 mm Electrical adjustment of thickness shaft Digital displays complete. incl. profiling Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition, as inspected, without guarantee or warranty

Condition: ready for operation (used), Technical characteristics Composition (7 shafts) : Kedpfx Ast Ruubjffsnf Planer 7.5 kW Right hand spindle moulder, Left hand spindle moulder 11 kW Planer 11 kW Planer 7,5 kW Right hand spindle 18,5 kW (possibility to install lenght cutting blades) Left hand spindle 18,5 kW (possibility to install lenght cutting blades) Shaft diameter 40 mm Feeding speed : up to 24 m/min Working width: 230 mm Working height: 120 mm Speed of rotation of the shafts 6000 rpm Cast iron frame, cast iron table Power and Motors Voltage: 230 V Pluging: Three-phased Power: 83 Kw Overall dimensions

Condition: excellent (used), Year of construction: 2005, working width 230mm working height 120mm 6 spindles spindles set: bottom/right/left/top/top/bottom second top spindle with Powerlock toothened roll in the infeed table spindles diameter 40mm spindles speed 8000 RPM Kjdpow Afazofx Affonf Power Com controller variable regulated feeder 5-30m/min

Condition: excellent (used), functionality: fully functional, Weinig Powermat 500 four-sided planer Working width 230mm Working height 160mm Number of spindles 6 Spindle arrangement: Bottom 5.5kw 8000r.p.m Right 5.5kw 8000r.p.m Left 7.5kw 8000r.p.m Top 7.5kw 8000r.p.m Bottom 7.5kw 8000r.p.m Knodjvfr Rgspfx Affef Universal 5.5kw 8000r.p.m Spindle #6 equipped with power lock system Feed speed adjustable by inverter up to 30m/min Pulling rollers in the worktop (1 grooved roller for wet wood) Electro-motorized positioning of height and working width Pneumatic material stops Drive on karda shafts Total power 41kw Year of production 2005 CE certificate

Condition: excellent (used), Year of construction: 1998, working width 230mm working height 140mm 5 heads Knedpfsw Afahsx Affof heads set: bottom/right/left/top/bottom table lubrication pneumatic pressure of feeding rolls two axes heads regulation spindles speed 6000 RPM electric regulation of pressure beam feeder with cardan variable regulated feeder heavy silenced cabinet

Condition: excellent (used), spindle diameter: 40 mm, spindle speed (min.): 6,000 rpm, working width 230mm working height 140mm 6 spindles spindles set: bottom/right/left/right/top/bottom spindles diameter 40mm variable regulated feeder electric adjustment of infeed fence electric adjustment of infeed table Knsdpfx Asp N Ehfeffsf ATS fast locking spindle system

Condition: excellent (used), working width 230mm working height 120mm Kodepkwaxspfx Affenf 5 heads heads set: bottom/right/left/top/bottom table lubrication pneumatic pressure of feeding rolls two axes heads regulation spindles speed 6000 RPM electric adjustment of pressure beam feeder with cardan variable regulated feeder solid silenced cabinet

Condition: excellent (used), working width 230mm working height 120mm 4 spindles spindles set: dolna/prawa/lewa/górna spindles diameter 40mm pneumatic pressure of feeding rolls table lubrication Kodpfxsqfd Dls Affsnf

Condition: excellent (used), working width 230mm working height 160mm Knedpfx Aoqmmfujffsf 5 spindles spindles set: bottom/right/left/top/bottom spindles diameter 40mm (last one 50mm) manual jointer on last head rolls in the table electric regulation of top head variable regulated feeder to 36m/min chrome table pneumatic pressure of feeding rolls

Condition: excellent (used), CATALOG NUMBER 6950 TECHNICAL DATA - Maximum workpiece width: 220 mm - Maximum workpiece height: 130 mm – 4 spindles: 1) Horizontal bottom, 220 mm, 5.5 kW 2) Vertical right, 130 mm 3) Vertical left, 130 mm; (spindles 2 and 3) 5.5 kW 4) Horizontal top, 220 mm, 5.5 kW - 4 electrically adjustable spindles (up/down) - All spindles adjustable up/down, right/left - Spindle diameter: 40 mm - 4 upper infeed drive rollers, gear-driven, including 1 double roller - 1 double upper outfeed drive roller, rubber-coated - Lower outfeed drive roller, rubber-coated - Feed via Cardan shaft rollers - Infinitely variable feed speed: 6–22 m/min - Feed motor: 2.2 kW - Lifting motor: 0.55 kW - Electric planing thickness adjustment - Infeed table length: 1970 mm - Central lubrication system - Extraction port diameter: 3x120 mm, 140 mm - Enclosed in cabin Knsdpfxjlikzfs Affef - Dimensions (LxWxH): 3350 x 1400 x 1400 mm - Weight: 1700 kg – German-made – Unpainted – Used planer, very good condition Net price: 38,900 PLN Net price: 9,260 EUR Net price calculated at exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)