Used Weinig Unimat 23 Sp for sale (481)

Condition: used, 6-head planer. High performance. Used, in excellent condition. FEATURES Dedpfxexl Rhge Adujwc - Made in Germany - Universal spindle - Used planer, in very good condition

Condition: used, Weinig brand moulding machine, Unimat U17N model with 7+1 axes, 170 mm axis length, with ruled table, cardan shaft drive. Dwsdpfx Adspfp Eljujc Axle composition: Bottom, right, left, right, top, bottom, left, universal. Axle motor power: 4+4+5.5+5.5+7.5+5.5+5.5+7.5 Kw. Towing motor power 4 Kw raises and lowers 0.75 Kw.

Condition: excellent (used), Four-sided planer WEINIG Cube Planing width: 260 mm Planing height: 160 mm Number of spindles: 4 Motors: 1 x 7.5 kW, 1 x 11 kW, and 1 x 7.5 kW Feed rates: 6 and 12 m/min Motorised adjustment of planing width and height Touchscreen control display Spindle speed: 6,000 rpm Spindle diameter: 40 mm Machine dimensions: 370 x 150, height - 170 cm Condition: very good Dwedpfx Adsxlqu Tjuec

Condition: like new (used), Year of construction: 2010, Weinig Rondamat 960 Powerlock (Automatic straight knife grinder and profile grinder) Dodpfexlk Nqox Aduewc Specification: Weinig Rondamat 960 Powerlock / HSK profile grinder. High-precision knife grinder for grinding straight knives and profiling using a template. Grinding straight knives in a knife block. Hand-held grinder for profile and straight grinding. Grinding wheel diameter min./max.: 150 mm / 225 mm Grinding wheel width: Ceramic 5 mm, Borazon 10 mm Grinding wheel bore: 60 mm Turning circle min./max.: 100 mm / 300 mm Tool width max.: 360 mm Grinding wheel drive: 1.1 kW Spindle speed: 1700 / 2000 / 2400 / 3000 rpm Relief angle: Radial: (back) 10 - 30 degrees, Axial: 0 - 20 degrees For swivel heads up to 60 degrees Coolant tank approx. 50 liters Table travel 0 - 360 mm Electrical connection approx. 2 kW Pneumatic connection value 5 bar Operating voltage 380 V / 50 Hz Complete documentation.

Condition: excellent (used), Multirip saw Dodpfjtwy Iusx Aduewc Max. Cutting width 310 mm Chain width 340 mm Max. Passage width / input width 650 mm Max. Cutting height with Quickfix clamping flange 110 mm Saw shaft diameter 65 mm Min. timber length 500 mm Max. Feed speed 35 m/min, variable Motor power 22.0 kW, 400 V, 50 Hz Feed motor 1.3 kW, 400 V, 50 Hz Saw blade diameter min./max. 300/ 350 mm Working height 850 mm Extraction diameter 250 mm Required extraction volume 5300 m3/h Quickfix saw blade attachment Electric height adjustment of the saw shaft Electric height adjustment of the pressure unit Dimensions approx. L x W x H = 1750 x 1750 x 1500 mm Weight 1850 kg Incl options: Oil level monitoring SafetyPlus Quickfix Note for used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: used, Year of construction: 1971, operating hours: 4,348 h, functionality: unexamined, machine/vehicle number: 462-1717, Used moulder Weinig PFA 17N, manufacturer: Michael Weinig KG, Tauberbischofsheim (Germany), model: PFA 17N, year of manufacture: 1971, machine number: 462-1717, 7 spindles (incl. universal spindle), spindle diameter: 40 mm, motor power approx. 3–5.5 kW per spindle, max. planing width approx. 170 mm, max. planing height approx. 120–140 mm, feed rate adjustable, weight approx. 3,500–4,000 kg. The machine is used and in age-appropriate condition. Dedoxlacmopfx Aduswc

Year of construction: 2005, condition: ready for operation (used), Additional Equipment Slotting Spindle: Ø 400 mm Cross-Cutting Saw Beveling Unit Circulating Conveyor Belt with Transfer Unit Longitudinal Processing with Profile Spindles Horizontal Spindle // Fitting Spindle // Grooving Spindle Mullion Supports Lateral Clamping Profile Spindles: Ø 50 mm, Max. Ø 200 mm // Profile Spindles: Ø 50 mm, Max. Ø 200 mm Pitched Window This WEINIG UNICONTROL 12 was manufactured in 2005. It is a comprehensive window manufacturing machine featuring a slotting spindle Ø 400 mm, cross-cutting saw, beveling unit, and a circulating conveyor belt with transfer unit. It supports longitudinal processing and includes a Siemens Panel PC for control. Ideal for producing pitched windows and double-part packages. For more information about this machine, please reach out to us. Djdpfxoxf N Iro Adujwc Application Types Other Woodworking Machinery

Condition: used, Weinig Profimat 22 with 4 shafts. Movable left shaft with measurement sensor, for automatic movement based on the width of the pieces inserted into the process. Dsdpfxjryb D Se Aduowc Dimensions and weight: Cm. 330*145*H160. Weight 1400 kg. (on pallet)

Condition: excellent (used), Rondamat R 934, year 1997, in very good condition. Dwedpexiv S Esfx Adusc

Condition: like new (used), Year of construction: 2019, Roofing batten Raimann line with minibundling and stacking. Included is: - infeed mechanism - Raimann Profirip 340 (2019) - outfeed rubber belt conveyor - ejecting roller conveyor - accumulating conveyor (before minibundling) - minibundling machine (4 mb/min) - accumulating conveyor (after minibundling) - stacker (7 layers/min) Dwedpfx Ajmk S S Eodujc Raimann Profirip 340 parameters: Year of manufacture: 2019 Speed: 10-80m/min Main motor: 55kW Cutting height: 15-140mm Maximum widht: 340mm Line is in good working condition, still in operation and is available for viewing in sawmill in Slovakia. Reason of sale is upgrade to 250m/min planer line. For more information or to arrange viewing feel free to contact us.

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm 1 used Weinig Unicontrol 6 window system ----- Manufacturer's description: For the production of individual parts, elements, and small series. Spindle arrangement: One cross-cutting saw, one single-sided tenoning and slotting spindle, one right-hand profiling spindle, one tenoning and slotting spindle, and profiling spindle suitable for holding multiple tools stacked on top of each other, with pneumatic spindle movement. Slotting table with motorized table movement and automatic transfer to the continuous, chainless rubber roller feed of the profiling unit. Feed height adjustment manually. Workpiece clamping via 2 pneumatic clamping cylinders. Length stop with scale and magnifying glass for frame or sash external dimensions. Tool positions (longitudinal and transverse machining) controlled via selector switch on the control panel. Technical Specifications ----- Crosscut Saw ----- Number of Tools: 1 Spindle Speed: 2,800 rpm Spindle Diameter: 40 mm Max. Tool Diameter: 350 mm Dodpfxew I Ea Ds Adujwc Motor: 3 kW Mortise and Slot Spindle ----- Number of Tools: 3/4 pcs. for wood thicknesses IV 68 - IV 92 Spindle Speed: 3,500 rpm Spindle Diameter: 50 mm Tool Clamping Length: 320 mm Max. Tool Diameter: 320 mm Motor: 11 kW Profile Spindle ----- Number of Tools: 3/4 pcs. for wood thicknesses IV 68 - IV 92 Spindle Speed: 6,000 rpm Spindle Diameter: 50 mm Tool clamping length 320 mm Max. tool diameter 232 mm Motor 11 kW Special equipment: Synchronous spindle ----- Pneumatically timed forward/backward for tear-free rerouting of window sashes, frames, and doors. Spindle diameter 50 mm, 4 kW Tool clamping length 120 mm, zero tool diameter 112-140 mm Max. tool diameter 232 mm, spindle speed 6000 rpm Motor boost for synchronous spindle from 4 kW to 7.5 kW Screen control for 99 window types. One type can contain up to 8 different parts, each with 2 end profiles and 2 longitudinal profiles. Production options: single parts, double parts, frame-by-frame, series, rerouting. Data entry via keyboard with integrated operator guidance and error diagnostics. 1 Grooving spindle from above ----- Motor power: 2.2 kW Speed: 6000 rpm Spindle diameter: 40 mm, with 10 x 4 mm key Clamping length: 13 mm Clamping length: 40 mm Axial stroke, 2 positions Radial stroke, 2 positions Max. tool diameter: 130 mm Grooving spindle motor boost from 2.2 to 3 kW 1 Fitting milling unit, right: ----- For milling fitting grooves in the circumferential milling pass or for grooving in the longitudinal profile. Pneumatic horizontal movement with selector switch on the control panel. Motor power: 2.2 kW Speed: 6000 rpm Spindle diameter: 40 mm Clamping height: 125 mm Tool cutting radius: min. 140 mm, max. 180 mm Home position below table level: 10 mm Special design of the fittings milling machine: Clamping length 150 mm Axial stroke 80 mm, 3 positions 3 tools Radial cycle, 2 positions Motor booster for the hinge milling spindle from 2.2 to 3 kW Hinge milling spindle for 230 mm tool diameters in and above the table Electric height adjustment of the feed with selector switch on the co...

Condition: used, Weinig brand moulder, model PFA17N, grooved table, 8 shafts (lower 4kw, right 4kw, left 5.5kw, right 4kw, upper 5kw, lower 4kw, universal 4kw, universal 4kw), used. Djdpek N I I Nefx Aduewc

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm 1 used Weinig Unicontrol 6 ----- Technical Specifications Summary ----- 1. Crosscut saw ----- Pneumatic crosscut saw, against 8-way turret stop Spindle speed: 2800 rpm Spindle diameter: 40 mm Max. tool diameter: 350 mm Motor power: 3 kW Laser alignment light for detecting the saw cut: Manual length stop 4100 mm 1. Tenon and slotting spindle ----- Number of tools: 3 / 4 Tool clamping length: 320 mm Vertical pneumatic spindle stroke: 240 mm for wood thicknesses IV 68-92 Spindle speed: 3500 rpm Spindle diameter: 50 mm Max. tool diameter: 320 mm Motor power: 11 kW 1. Profiling spindle - synchronous and counter-rotating spindle ----- Position: vertical right Number of tools: 1 Tool clamping length: 120 mm Spindle speed: 6000 rpm Spindle diameter: 50 mm Maximum tool radius: 232 mm Motor power: 7.5 kW 2. Profiling spindle ----- Position: vertical right Number of tools: 3 / 4 Tool clamping length: 320 mm Vertical pneumatic spindle stroke: 240 mm for wood thicknesses IV 68-92 Spindle speed: 6000 rpm Spindle diameter: 50 mm Maximum tool radius: 232 mm Motor power: 11 kW 3. Profiling spindle (fitting spindle) ----- Position: vertical right Number of tools: 3 Spindle speed: 6000 rpm Spindle diameter: 40 mm Maximum tool radius: 180 mm Motor power: 3 kW Clamping length: 150 mm 4. Glazing bead saw (horizontal-vertical) Cycled ----- Position: horizontal, top Number of tools: 1 Tool clamping length: 40 mm Spindle diameter: 40 mm Motor power: 3 kW Axial cycle, 2 positions Radial cycle, 2 positions Other features ----- Flanging device for tear-free flanging Double parts package Return device for 1-person operation at working height: Swivel bath Screen control, 99 programs Sloped window device Electronic angle display for sloped windows Optional window tools OPPOLD, year of manufacture 2013: Oppold IV 68/78/92 Wood Oppold IV 68/78 Wood-Aluminum Dsdpfx Ajw Im Hxjduswc (Technical specifications according to the manufacturer - without guarantee!)

Condition: used, Tenoning spindle , 0 Number of milling agregates , St. Spindle diameter , mm Number of machnines , Stk Company closure for wooden window construction ----- Machines will be available from October 2024. Everything is still ready for demonstration Pos. 1: Weinig, PFA 17N, built in 1967 Four-sided planer, 6 spindles, chain drive, with glazing bead separation, with Dwedpfx Asw Im Hrjdujc planing heads Continuous feed, working width 170 mm, working height 120 mm Electric height adjustment feed beam Pos. 2: MAPO Spu 180, built in 1992, finishing machine, mobile Pos. 3: Gubisch CW 2, built in 1998, angle system with return, with Leitz IV 68 wood, wood-aluminum; Gold IV 78 wood 1 slot spindle, 3 profile spindles Pos. 4: Götzinger OBM, built in 1998 corner bearing and olive drilling machine, 1 drill head Olive, 1 x drill head corner bearing Roto NT with left and right roller tables and stops, drilling on individual parts or glued frame Pos. 5: Panhans type 259, built in 1995, swivel spindle milling machine with extended support table and frame milling ruler, Feeder Hafffner 4 rollers, 3000/4000/5000/6000 rpm Pos. 6:Rapid chain milling machine Pos. 7: Klein and Söhne, combined jointer and thickness planer Pos. 8: Filter house with silo, filter system, fan Spänex SHB 50-250-SPS, built in 1998 briquetting press with automatic control Spänex return air duct for summer/winter operation, return air ceiling filter ----- Total price from location: 30,000.00 euros Machines must be dismantled and loaded by the buyer himself. Subject to errors and prior sale.

Condition: used, Year of construction: 2009, max. workpiece length 4500 mm profile spindle 1 Stück main drive 20 kW Control Siemens Weinig Conturex 2 C 114 ----- Working width: 40-260 mm Working height: 25-110 mm 2 x PowerGrip clamp tables, 2 x 2280 mm ----- Workpiece length 200 - 4,500 mm Workpieces over 2,700 mm in length are machined using a repositioning cycle. Main spindle 1: ----- Motor with brake 20 kW HSK 63F Electronically adjustable speed 2,000-18,000 rpm Maximum tool length from flat surface HSK 63 F: 290 mm With C-axis Tool magazine: ----- Number of pockets: 30 mm Pitch between pockets: 100 mm Permanently installed multi-spindle drilling head Dodjwunwyopfx Aduswc ----- For horizontal and vertical drilling and milling work without tool changes ----- Price ex-site Prices for disassembly and loading onto customer trucks Transport within Germany and abroad as well as reassembly Commissioning and, if required, new profiles are available upon request! Used tools included (drawings available upon request): ----- Wood: IV 68, 78, 88, opening inside and out, with hinged weatherboard Wood-aluminum: IV 68/68, 78/78, 87/68, 97/78 Lift-and-slide doors IV 68 and 78 Front doors IV 68 and 78 Pivot windows Corner connection: counter/dowel Technical specifications according to the manufacturer - no guarantee! Detailed technical description available upon request!

Condition: used, Number of spindles 5 St. Working width 220 mm Working height 120 mm Length of the planing table 2500 mm Dedsv Irizspfx Adujwc Feed motor 6 kW Feed speed 6-22 m/min. total power requirement 25 kw Dimensions (L/W/H) 3500 x 1500 x 1600 mm weight of the machine ca. 2000 kg 1 WEINIG four-side planer Type PROFIMAT 22 N with 5 spindles ----- Working width 220 mm, working height 120 mm Still in use, can be viewed Spindle arrangement: 1st spindle bottom 4.0 kW, 2nd spindle right and 3rd spindle left 7.5 kW, 4th spindle top 5.5 kW, 5th spindle bottom 4.0 kW Spindle diameter 40 mm, Feed 3 kW, continuously adjustable from 6 - 22 m/min Special equipment: Cardan drive Profiling package Includes 5 used planer heads. (Technical specifications according to the manufacturer, without guarantee!)

Condition: used, Tenoning spindle 2 Stk. Number of milling agregates 8 St. Spindle diameter 50 mm Control Weinig Nexus Touchscreen Weinig Unicontrol 12 ----- For sale on behalf of a customer at a favourable price. Includes Leitz IV 68/ IV 78 wood and IV 68 wood-aluminium tools. Machine still in operation until approx. end of October 2025 ----- Technical manufacturer's description: > Slotting spindles: 2 > Profile spindles: 3 > Horizontal spindles: 3 > Max. workpiece length: 4,500 mm > Max. workpiece width: 220 mm > Max. workpiece thickness: 120 mm > Edge rounding device > Controlled horizontal spindle > Separate gear groove spindle > Slotted spindle: 640 mm > Profile spindle: 400 mm > Automatic top rung support > Synchronous spindle: 400 mm > Gear groove spindle: 160 mm > Total spindle stroke: 590 mm > Spindle diameter: 50 mm > Flight circle profile tool: 140 mm > Flight circle slotting tool: 300 mm > Stepless spindle stroke > Radial spindle adjustment: NC axis, pneumatic > Electronically controlled length stop > Inclined window > Angle stop, mitre difference compensation > Equipped for rebating > Splinter protection rebating > Automatic counter wood > Workpiece return: longitudinal conveyor, turning station, cross conveyor Dwsdpfxew Hg T Ds Aduec > Turning system > Max. feed rate 10 m/min > Stepless feed rate > PC control > Profile splitting > Double part package > Weinig Nexus touchscreen > Space requirement (length x width): 14.7 metres x 12.7 metres ----- Includes tools: IV 68/ IV 78 wood, IV 68 wood-aluminium. ----- Price of the above machine available on request! ----- (Technical data according to manufacturer – no guarantee!) All prices quoted are net. Plus statutory VAT.

Condition: used, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Weinig PowerCom Weinig Powermat 500 for window production ----- Machine is already reconditioned and functionally checked Short summary: ----- 6 Spindles with 8,000 rpm and 7.5 KW 5 x HSK/Powerlock Window package with glazing bead separation Spindles axially and radially CNC controlled right and upper spindles with common pneumatic timing for Glazing bead cutting Large control Powercom with touchscreen Detailed description: ----- Tool arrangement No. 018 for window production Technical specifications: ----- Working width 20 - 230 mm (at tool cutting circle 93 - 125 mm) Working height 8 - 120 mm (at tool cutting circle 93 - 125 mm) 1. Tool holder ----- First lower tool holder Motor with brake 7.5 KW Diameter: 40mm Speed 8,000 rpm Dsdpfx Aevf Raajduewc including high-performance ball bearings Tool flight circle 125 - 180 mm In connection with PowerLock 93 - 180 mm Axial adjustment range 17 mm Hardened table insert in front of the 1st lower tool holder 2. POWERLOCK/HSK tool holder ----- First right tool holder Motor with brake 7.5 KW Speed 8,000 rpm including high-performance ball bearings Tool flight circle 93 - 200 mm Maximum throat depth 35 mm Axial adjustment range for spindle 80 mm Axial adjustment range for PowerLock 55 mm Adjustment path radial Min. tool diameter at stop level 93 mm Max. tool diameter behind stop level 200 mm Axially and radially CNC controlled 3. POWERLOCK/HSK tool holder ----- First left tool holder Motor with brake 7.5 KW Speed 8,000 rpm including high-performance ball bearings Tool flight circle 93 - 200 mm Tool cutting circle for straight cutter heads max. 163 mm Maximum throat depth 35 mm Axial adjustment range for spindle 80 mm Axial adjustment range for PowerLock 55 mm Pressure shoe in front of the left tool holder, including 2 lateral pressure rollers, spring-loaded Axially and radially CNC controlled 4. POWERLOCK/HSK tool holder ----- First upper tool holder Motor with brake 7.5 KW Speed 8,000 rpm including high-performance ball bearings Tool flight circle 93 - 200 mm Tool cutting circle for straight cutter heads max. 163 mm Maximum throat depth 35 mm Adjustment path axial 40 mm Axially and radially CNC controlled 5. POWERLOCK/HSK tool holder ----- Second upper tool holder Motor with brake 7.5 KW Speed 8,000 rpm including high-performance ball bearings Tool flight circle 93 - 200 mm Tool cutting circle for straight cutter heads max. 163 mm Maximum throat depth 35 mm Adjustment path axial 40 mm Axially and radially CNC controlled 6. POWERLOCK/HSK tool holder ----- Second lower tool holder Motor with brake 7.5 KW Speed 8,000 rpm including high-performance ball bearings Tool flight circle 93 - 225 mm Maximum throat depth 15 mm Adjustment path axial 40 mm Adjustment path radial Min. tool diameter to table level 93 mm Max. tool diameter 6 mm under table ...

Condition: used, Tenoning spindle 2 St. Number of milling agregates 7 St. Spindle diameter 50 mm control Weinig, PC-Nexus Weinig Unicontrol 12 with radial and axial CNC spindles as well as VARIO table and milling carriage ..... Machine dismantled professionally and in our warehouse in 73447 Oberkochen. Video and pictures were taken before dismantling. Technical data summary (please inquire about any additional accessories included) ..... crosscut saw ..... > Electronic crosscut saw, horizontally infinitely adjustable > Number of tools: 1 piece. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser directional light to detect the saw section > Axial adjustment path 150 mm NC axis, electronically infinitely variable > Radial pneumatic adjustment path 8 positions for e.g. edge rounding from above Rounding aggregate ..... > Position: horizontally below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Tool clamping length: 25 mm > Spindle speed: 9,000 rpm > Tool diameter: max. 130 mm > Axial adjustment path mechanically coupled with crosscut saw. > Radial adjustment pneumatically controlled on/off electronic length stop ..... > Length 4500 mm 1. Tap and slot spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment path: 580 mm NC axis, continuously variable > Spindle speed: 2,800 rpm > Tool diameter: max. 400 mm > Overtravel counter, complete clamping length is countered 2. Tap and slot spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment path: 580 mm NC axis, continuously variable > Spindle speed: 2,800rpm > Tool diameter: max. 400 mm > Overtravel counter, complete clamping length is countered Transfer tape ..... Included for transferring the parts to longitudinal machining Separation of double parts before the start of longitudinal processing. 1. Profiling spindle (synchronous and counter-rotation) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool flight circle min.: 140 mm > Tool flight circle max.: 232 mm > 2 feed rollers axially pneumatically controlled opposite the spindle, 8 positions > Table top pneumatically controlled to the tool diameter Djdevu Hdyspfx Aduswc 2. Profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool fli...

Condition: used, Number of spindles 5 St. Working width 20 - 230 mm Working height 8 - 120 mm Length of the planing table 2000 mm Feed motor 1,1 kW Feed speed stufenlos regelbar 2 - 12 m/min. 1 WEINIG VARIOMAT planer and moulder including multifunction / slotting table ----- Machine will be cleaned and functionally tested before delivery ! Technical manufacturer's description: ----- Working width: 20 - 230 mm Working height: 8 - 120 mm 1st spindle horizontal, bottom ----- Motor with brake: 5.5 kW Diameter 40 mm Speed ??6000 rpm Tool radius 125 - 145 mm Axis adjustment range 5 mm Folding device including rebate cutter MarathonCoating for table insert before and after the 1st lower spindle 2nd spindle vertical, right ----- Motor with brake: 11 kW Common motor with left vertical spindle Diameter 40 mm mm Speed ??electronically adjustable 3000 - 6000 rpm (for 11 kW/15 HP) Tool cutting radius for longitudinal machining 93-232 mm Minimum tool diameter at stop plane: 93 mm Maximum tool diameter behind stop plane: 180 mm Maximum throat depth 45 mm Axially adjustable travel 30 mm Insertion segment, including additional stop lip 125 mm Insertion segment, including additional stop lip 150 mm 3rd vertical spindle, left POWERLOCK/HSK ----- Shared motor with 1st right spindle PowerLock tool holder Shared speed with right vertical spindle Tool cutting radius for longitudinal machining 93-232 mm Maximum throat depth 45 mm Minimum throat depth with tool cutting radius 200 mm: 20 mm Axially adjustable travel under table 30 mm Dwodpfx Adjwugpbouoc Insertion segment 125 mm Insertion segment 150 mm 4th spindle, horizontal, top ----- Motor with brake: 5.5 kW Diameter 40 mm Speed ??6000 rpm Tool cutting radius 125-200 mm Maximum chamfering depth 30 mm Minimum chamfering depth with a tool cutting radius of 200 mm: 20 mm Axially adjustable range 30 mm Glazing bead removal after the upper spindle 5th spindle, second, horizontal, bottom ----- Motor with brake: 4 kW Diameter 40 mm Speed ??6000 rpm Tool cutting radius 125-200 mm Maximum chamfering depth 15 mm Axially adjustable range 10 mm Machine operation ----- Both axes of all spindles - with the exception of the first lower spindle - are equipped with mechanical digital displays. Central radial adjustment with mechanical digital display of the feed rate along with the pressure in front of the upper spindle. The pressure after the upper spindle can be adjusted separately. Memory function ----- For saving the setting values ??of profiles Tool holder axes and pressure elements before and after the upper tool holder with electronic dual displays: Function: -Saving the setting values ??of the finished profile at the touch of a button under a profile number - When the profile number is selected again, the electronic dual displays show the setting values - By manually adjusting the tool holders and pressure elements, the displays are aligned - 99 memory locations 3 axial CNC-controlled adjustment and positioning of the spindles in conjunction with the memory function. For spindles 2, 3, an...

Condition: used, Year of construction: 2014, Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Memory-Funktion Weinig Powermat 600 Compact ----- The machine will be cleaned and completely checked before delivery. Brief Summary: ----- - 5 spindles - Powerful motors - Left and upper spindles controlled for width and height Detailed Description: ----- Technical Specifications: Working width: 20-230 mm Working height: 10-120 mm Number of spindles: 5 1st spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool travel radius: 125-145 mm Tool travel radius for rebate cutter: 130-160 mm Axis adjustment range: 5 mm Rebate device MarathonCoatin for table insert in front of the 1st lower tool holder Electronic digital display for wheel adjustment 2nd spindle - Right ----- Motor with brake: 11.0 kW Shared motor with left-hand tool holder Spindle diameter: 40 mm Speed: 6,000 rpm Tool cutting radius 40 mm below table level: 93 - 200 mm Tool cutting radius 55 mm below table level: 93 - 180 mm Tool cutting radius for straight cutter heads max. 163 mm Max. tool diameter behind stop level: 180 mm Max. throat depth: 35 mm Axis adjustment range: 55 mm 3rd spindle - left ----- Motor with brake: Shared motor with the 2nd spindle Spindle diameter: 40 mm Speed: 6,000 rpm Tool cutting radius 40 mm below table level: 93 - 200 mm Tool cutting radius 55 mm below table level: 93 - 180 mm Tool cutting circle for straight cutter heads max. 163 mm Max. throat depth: 35 mm Axial adjustment range: 55 mm Radial CNC-controlled spindle 4th spindle - top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool cutting circle: 93 - 200 mm Tool cutting circle for straight cutter heads max.: 180 mm Max. throat depth: 35 mm Axial adjustment range: 40 mm Radial CNC-controlled spindle Split pressure shoe in front of the upper tool holder, adjustable to the tool cutting circle and pivoting away from the tool, spring-loaded. Pressure shoe before and discharge after the upper spindle with electronic digital displays, integrated into the memory function. 5th spindle - lower ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool cutting radius: 93 - 200 mm Max. groove depth: 15 mm Axis adjustment range: 35 mm Feed system ----- Electronic feed, continuously adjustable with brake: 4 kW, 5 - 30 m/min Feed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers with depth gauge and self-cleaning. Adjustment range of the feed rollers relative to the left tool holder, axial: 35 mm Dwodpfewzmu Rox Aduec Machine electrical system ----- Operating voltage 400 V (voltage range 380 - 420 V), 50 Hz. All spindles are IE 2 version. Electrical design according to DIN VDE 0113, electrical equipment for industrial machines EN60204, IEC-204-1. Other electrical regulations are not taken into account. Machine stands, tables, and stops -----...

Condition: used, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ----- The machine renovated and functionally checked ! Short summary: ----- 6 spindles with 8,000 rpm 5 x HSK/Powerlock Axial and radial CNC adjustment of the spindles via control CNC - controlled adjustment and positioning of the feed Detailed description: ----- Technical specifications: Working width: 20-230 mm Working height: 8-120 mm Number of spindles: 6 1. Tool holder - below ----- Motor with brake: 5.5 kW Spindle diameter: 40mm Speed: 6,000 rpm Tool flight circle: 93 - 160 mm Axial adjustment range: 5 mm Rebating device MarathonCoatin for table insert in front of 1st lower tool holder 2. Tool holder - PowerLock - right ----- Motor with brake: 11.0 kW Common motor with left tool holder Speed ??including high-performance ball bearing: 8,000 rpm Tool flight circle 40 mm below table level: 93 - 200 mm Tool flight circle 55 mm below table level: 93 - 180 mm Tool cutting circle for straight cutter heads max. 163 mm Max. tool diameter behind stop level: 180 mm Max throat depth: 35 mm Axial adjustment range: 55 mm Spindle axially and radially CNC controlled 3. Tool holder - PowerLock - left ----- Motor with brake: Common motor with the 2nd spindle Speed ??including high-performance ball bearing: 8,000 rpm Tool flight circle 40 mm below table level: 93 - 200 mm Tool flight circle 55 mm below table level: 93 - 180 mm Tool cutting circle for straight cutter heads max. 163 mm Max throat depth: 35 mm Axial adjustment range: 55 mm Spindle axially and radially CNC controlled 4. Tool holder - PowerLock - above ----- Motor with brake: 7.5 kW Dwedpfsuzaa Sex Aduec Speed ??including high-performance ball bearing: 8,000 rpm Tool flight circle: 93 - 200 mm Tool cutting circle for straight cutter heads max.: 180 mm Max throat depth: 35 mm Axial adjustment range: 40 mm Divided pressure shoe in front of the upper tool holder, on tool flight circle adjustable and pivoting away from the tool, spring-loaded. Radial CNC-controlled spindle 5. Tool holder - PowerLock - above ----- Motor with brake: 7.5 kW Speed ??including high-performance ball bearing: 8,000 rpm Tool flight circle: 93 - 200 mm Tool cutting circle for straight cutter heads max. : 180 mm Max throat depth: 35 mm Axial adjustment range: 40 mm Divided pressure shoe in front of the upper tool holder, on tool flight circle adjustable and pivoting away from the tool, spring-loaded. Spindle axially and radially CNC controlled 6. Tool holder - PowerLock - below ----- Motor with brake: 7.5 kW Speed ??including high-performance ball bearing: 8,000 rpm Tool flight circle: 93 - 200 mm Max throat depth: 15 mm Axial adjustment range: 35 mm Radial CNC-controlled spindle feed system ----- Frequency-controll...

Condition: used, Tenoning spindle 2 St. Number of milling agregates 7 St. Spindle diameter 50 mm control CNC, Weinig PC-Nexus Weinig Uncontrol 12 with radial and axial CNC spindles and VARIO table ..... The machine has already been professionally dismantled and stored in 73447 Oberkochen Specifications summary (please inquire about any additional accessories included) ..... crosscut saw ..... > Crosscut saw electronically, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 3000-6000 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser guide light for detecting the sawing section > Axial adjustment path 150 mm NC axis, electronically stepless > Adjustment path, radial, pneumatic, 8 positions, e.g. for edge rounding from above rounding aggregate ..... > Position: horizontally below > Axial adjustment path together with the crosscut saw. electronic length stop ..... > Length 4500mm 1. Tap and Slot Spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm Djdpfx Ajwmgfyeduowc > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm NC axis, stepless > Spindle speed: 2,800-4,000 rpm > Tool diameter: 380-400mm > Overrun counter, complete clamping length is countered 2. Tap and Slot Spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm NC axis, stepless > Spindle speed: 2,800-4,000 rpm > Tool diameter: 380-400mm > Overrun counter, complete clamping length is countered transfer tape ..... Included for transferring the parts to longitudinal processing Separation of double parts before entering longitudinal processing. 1. Profiling spindle (synchronous and counter-rotating) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range 350 mm NC axis, stepless > Radial adjustment range 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Minimum tool flight circle: 140 mm > Tool flight circle max.: 232 mm 2. Profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range 350 mm NC axis, stepless > Radial adjustment range 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Minimum tool flight circle: 140 mm > Tool flight circle max.: 232 mm 3. Profile milling unit (grooving device from above) ..... > Position: horizontally above > Motor power: 3.0 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment range 30 mm NC axis, stepless > Radial adjustment range 125 mm NC axis, stepless > Spindle speed: 9000 rpm > Tool flight circle max.: 130 m...

Condition: used, Number of spindles 4 St. Number of tools 11 St. Spindle diameter 50,40 mm Spindle length 285,125 mm length 4000 mm width 2000 mm height 2200 mm Weinig Univar 10/3 folding machine ----- For milling around windows, doors and the like with uneven circumferential profiles. Machine suitable for wood thickness 68 to 92 mm Time required per frame milling, medium size 1.20 x 1.20 m - approx. 2 minutes. The available tool positions are selected using a selector switch on the control panel retrieved. Machine with 3 hydraulically controlled right precision Lifting spindles for holding 3 tool sets, 2 x 95 mm spindle stroke per spindle The spindle stroke takes place in a U-movement, so that the opening is possible for short parts The milling stop remains as small as possible. Spindle stroke horizontally fine Adjustable for both tool positions from the operator side. Central lubrication for the spindle units. The 1. Spindle can be selected in right-left rotation. This spindle dips the last 100 mm of each frame end appropriate synchronization tool into the passing wood. Through this This prevents the tool of the subsequent milling spindle from running in the opposite direction working, causing tearouts. Excavation of the first 7 transport rollers using Footswitch. This shortens the lead time. An additional The support rail also allows large-format frames to be milled around. Continuous, chainless rubber roller feed with extreme short roller spacing. Height adjustment of the feed bar electrically readable. Electrical version according to VDE. Machine including operating tools, but without processing tools tools. Technical data: Working width min. 40 mm Working height min. 30 mm, max. 100 mm 1. Profiling spindle (synchronous and counter-rotation) ----- -- Motor strength lifting spindle 11.0 kW Spindle speed 6000 rpm Spindle diameter 50 mm Clamping length 285 mm Tool zero flight circle 112 - 140 mm Max. tool - D : 232 mm Spindle stroke vertical 2 x 95 mm for 3 tools Basic position under table 10 mm (adjustable up to 20 mm) Spindle stroke horizontal 80 mm with synchronous automatic immersion 2. Profiling spindle ----- Motor strength lifting spindle 11.0 kW Spindle speed 6000 rpm Spindle diameter 50 mm Clamping length 285 mm Tool zero flight circle 112 - 140 mm Max. tool - D : 232 mm Spindle stroke vertical 2 x 95 mm for 3 tools Basic position under table 10 mm (adjustable up to 20 mm) Spindle stroke horizontal 80 mm 3. Profiling spindle ----- Motor strength lifting spindle 11.0 kW Spindle speed 6000 rpm Spindle diameter 50 mm Clamping length 285 mm Dwsdpjvnv Uuefx Aduec Tool zero flight circle 112 - 140 mm Max. tool - D : 232 mm Spindle stroke vertical 2 x 95 mm for 3 tools Basic position under table 10 mm (adjustable up to 20 mm) Spindle stroke horizontal 80 mm 4. Profile spindle - fitting unit on the right ----- For milling the fitting groove in the milling cycle or for grooving in the longitudinal profile. Pneumatic horizontal movement with Selector switch in the control panel. Motor 2.2 KW Speed 6,000 rpm Spindle diameter 40 mm Clamping height 125 mm, 2 tools Tool flight circle min. 140 mm, max. 180 mm Motor power feed 1.1 kW Feed speed 6 - 12 m/min. ...

Condition: used, Tenoning spindle 1 St Number of milling agregates 4 St. Spindle diameter 50 mm Control Weinig, PC-Nexus Weinig Unicontrol 10 CNC - Spindles radially and axially CNC-controlled ----- The machine was factory overhauled by Weinig in 2024. The control system was also upgraded to a Siemens S 7 677 C, with a new membrane panel "Touch". With the following machining units: Crosscut saw ----- with laser alignment light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 Axially adjustable via NC axis Radial pneumatic adjustment to 8 positions for edge rounding from above Unit from below for edge rounding ----- Axially adjustable with crosscut saw Tenon and slotting spindle ----- Motor power 15 kW Spindle diameter 50 mm Spindle speed 2,925 rpm Tool travel radius min. 380, max. 400 mm Tool clamping length 640 mm Axially adjustable CNC axis Axially adjustable travel 580 mm Adjustment speed 100 mm/sec. 1. Profile spindle (up- and down-rotation) ----- Motor power 11 kW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axially and radially adjustable via CNC axis 2. Profile spindle ----- Motor power 11 kW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axially and radially adjustable via CNC axis Profile milling unit horizontally mounted on top ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 9,000 rpm Pneumatically adjustable to 8 axial and radial positions Profile milling unit vertically mounted on the right side Machine end ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 5,850 rpm Pneumatic adjustment to 8 axial and radial positions Additional accessories ----- CNC-controlled length stop, mounted on the slotting table Dwedpfx Aew Im H Sodusc for lengths up to 3,500 mm, including a positioned cross-cutting saw integrated into the control system. Studio window device, pivots 60° on both sides Double-part package with automatic separation and transfer Synchronization device with automatic window rebating Rebating carriage for rebating small sash widths Air conditioning unit in the control cabinet PC control NEXUS Automatic turning system Slat conveyor, including conveyor belt for returning the workpieces to the operator (Technical specifications according to the manufacturer - without guarantee).