Used Weinig Unicontrol 10 for sale (475)

Condition: good (used), Year of construction: 2010, WEINIG NKT Finger Joint Cutter Double-Pack DP20 An industrial finger jointing line – engineered for maximum precision and efficiency Technical Specifications: Wood infeed length: min. 130 mm | max. 1000 mm Wood outfeed length: min. 3700 mm | max. 7400 mm Wood cross-section: min. 20 x 40 mm | max. 80 x 180 mm Cutter diameter: 370 mm Finger joint type: Vertical / Horizontal, 10/11 fingers, 3.8 mm pitch Glue application: 2-sided, PVAC white glue Connected load: 80 kW Note: The machine is currently dismantled and stored at our site. Inspection is possible by appointment. Scope of delivery: Bcsdpfx Aox Ti Rfeafou WEINIG NKT Double-Pack DP20 incl. control unit Integrated glue station for two-sided application Operating manual & documentation

Condition: good (used), Year of construction: 1983, functionality: fully functional, Four-sided planer / moulder Unimat 22A, 7 spindles Year of manufacture 1983 Bcjdpfxjrb D Dle Aafsu S/N 225-347 Manufacturer Weinig Germany Planing width 220mm Plane height 120 mm 7 planing shafts: Jointer table length 2000 mm Spindle arrangement (speed of the working spindles 6000 rpm) 1. bottom, 4 kW 2. right, 3 kW 3. left, 4 kW 4. right, 4 kW 5. top, 7.5 kW 6. bottom, 4 kW 7. universal, 11 kW Powered smooth pull-out roller in the table spindle diameter 40 mm Flying circle of the dressing spindle 125 mm Flying circle of the dressing spindle 100-180mm Largest flying circle of the milling spindles 180mm Cardanic feed Feed infinitely variable (frequency converter) 6-36 m /min. Manual Waxilit pump Outer dimensions L 4000 mm x W 1600 mm x 1700mm 4500 kg

Condition: good (used), Year of construction: 1982, WEINIG Four side planer, 5 heads PM 17 machine no. 1329-2356 year of manufacture: 1982 planning width 170 mm planning height 120 mm 5 spindles: Bcedpsicbhvjfx Aafeu max. tool length 180 mm, 130 mm infeed table length 2000 mm with planer heads 6 spindles arrangement: 1 bottom 4 kW 2. right 3 kW 3. left 5,5 kW 4. top 5,5 kW 5. bottom 4 kW / universal spindle diameter approx. 35 mm infeed speed 6,5 - 49 m/min. manual lubricant pump Incl. 5 tools for all heads dimension 4500 mm x 1300 mm x H 1500 mm Weight appr. 3800 kg technical specification under subject of correction

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 647-1806 POS21, WEINIG stacking device in very good condition, fully automatic stacker, maximum size of stacked package 5m x 1m x 1m, up to 9 interlayers per layer. Complete with CRP 600 throughfeed optimizing saw for chalk marking. Machines are in continuous operation; inspection is welcome. Bcsdsxzk S Ropfx Aafeu

Condition: excellent (used), CATALOG NUMBER: 6575 TECHNICAL DATA - Max. workpiece width: 230 mm - Max. workpiece height: 170 mm - 7 spindles: 1) Lower horizontal 230 mm, 11 kW 2) Right vertical 170 mm 3) Left vertical 170 mm (2nd and 3rd spindle), 11 kW 4) Right horizontal 170 mm, 5.5 kW 5) Upper horizontal 230 mm, 11 kW 6) Lower horizontal 230 mm, 7.5 kW 7) Universal 230 mm, adjustable in 360°, 7.5 kW - All spindles adjustable up/down, right/left - Spindles 3 and 5 are electrically adjustable - ATS system - Spindle diameter: 40 mm - Electric brakes - Top: 4 infeed driven rollers, serrated, including 1 double roller - Top: 1 double rubber infeed roller - Top: double rubber outfeed roller - Bottom: 2 smooth steel driven rollers - Bottom: double rubber driven roller - Power feed via Cardan shafts - Pneumatically pressed rollers - Infinitely variable feed speed: 6–24 m/min - Feed motor: 5.5 kW - Electric thickness adjustment - Motorized elevation of machine body: 0.55 kW - Centralized table lubrication - Extraction outlet diameter: 7 x 140 mm - Dimensions (LxWxH): 5800 x 2050 x 1850 mm - Weight approx.: 4500 kg ADVANTAGES – Made in Germany, WEINIG brand – With 7 heads – Universal spindle – With ATS system Bcsdpfx Aasx Rc S Defju – For processing wet and dry timber – Used moulder, condition: very good Net price: 169,900 PLN Net price: 40,450 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price subject to change in case of significant currency fluctuations)

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, Auction of a Weinig finger jointing machine! Bcedpfsx Rbl Nox Aafeu

Condition: used, Complete production line for the manufacture of slatted frames. From woodworking through to final assembly and packaging. Includes all components such as moulders, saws, profile processing, forklifts, compressors, etc. The larger machines/plants are from around year of construction 2000. Consisting of: Production of solid wood rails: - 2 x Multiblade rip saws RAIMANN KR 450 + KS 310 - Optimising cross-cut saw GRECON ILLERTISSEN OPTICUT 704R - Four-sided planer WEINIG HYDROMAT 23 - Stacking unit Foiling / Finishing of longitudinal rails: - 2 x Profile wrapping machines FRIZ OPTIMA PU25-PAP - Foil cutting machine FRIZ FSM 1500 CNC drilling and sawing units: - KOCH CNC drilling and sawing line with turning and stacking unit - ISE CNC drilling and sawing unit with stacking unit - 2 x ISE CNC woodworking centres / drilling units - ISE CNC machining centre for spring slats - 2 x Manual slat drilling machines Single machines: - GANNOmat CNC drilling and dowelling machine - Pnahans table routing machine - 2 x EiMa double mitre saws - SCM panel saw - Barth frame press - 2 x FLOTT column drilling machines - SAMCO combination sawing and milling machine - 2 x Multi-spindle drilling machines - 2 x Belt sanders - Spray booth - Various small machines Assembly: - Automatic assembly machine for standard slatted frames Bcsdpfxex S Scbo Aafou - Capping press / line - 14 x Pneumatic assembly tables Logistics – operating equipment: - 3 x LINDE forklift trucks E16 / E20 - 7 x LINDE high-lift/ electric pallet stackers - WEYCOR wheel loader 95E SUPER - Atlas-Copco compressor system - WEIMA single-shaft shredder - Kärcher ride-on sweeper - HONDA snow blower - Extraction system outdoor area - Batch of mesh boxes & Euro pallets - Various racking systems Packaging: - Shrink tunnel system - Stationary pallet wrapper - Mobile pallet wrapper Materials: - Remaining stock of timber / spring slats - Remaining stock of end caps / plastic parts - Miscellaneous remaining assembly materials Many more PHOTOS and detailed DATA available on request.

Condition: used, Year of construction: 2000, Complete production line for the manufacture of slatted frames. From woodworking through to final assembly and packaging. Includes all components such as moulders, saws, profile processing, forklifts, compressors, etc. The larger machines/plants are from around year of construction 2000. Consisting of: Production of solid wood rails: - 2 x Multiblade rip saws RAIMANN KR 450 + KS 310 - Optimising cross-cut saw GRECON ILLERTISSEN OPTICUT 704R - Four-sided planer WEINIG HYDROMAT 23 - Stacking unit Foiling / Finishing of longitudinal rails: - 2 x Profile wrapping machines FRIZ OPTIMA PU25-PAP - Foil cutting machine FRIZ FSM 1500 CNC drilling and sawing units: Bsdpfxjx S Sb Dj Aafecu - KOCH CNC drilling and sawing line with turning and stacking unit - ISE CNC drilling and sawing unit with stacking unit - 2 x ISE CNC woodworking centres / drilling units - ISE CNC machining centre for spring slats - 2 x Manual slat drilling machines Single machines: - GANNOmat CNC drilling and dowelling machine - Pnahans table routing machine - 2 x EiMa double mitre saws - SCM panel saw - Barth frame press - 2 x FLOTT column drilling machines - SAMCO combination sawing and milling machine - 2 x Multi-spindle drilling machines - 2 x Belt sanders - Spray booth - Various small machines Assembly: - Automatic assembly machine for standard slatted frames - Capping press / line - 14 x Pneumatic assembly tables Logistics – operating equipment: - 3 x LINDE forklift trucks E16 / E20 - 7 x LINDE high-lift/ electric pallet stackers - WEYCOR wheel loader 95E SUPER - Atlas-Copco compressor system - WEIMA single-shaft shredder - Kärcher ride-on sweeper - HONDA snow blower - Extraction system outdoor area - Batch of mesh boxes & Euro pallets - Various racking systems Packaging: - Shrink tunnel system - Stationary pallet wrapper - Mobile pallet wrapper Materials: - Remaining stock of timber / spring slats - Remaining stock of end caps / plastic parts - Miscellaneous remaining assembly materials Many more PHOTOS and detailed DATA available on request.

Condition: refurbished (used), Shear machine Weinig brand model U22N, refurbished. 22 cm bench + faced bench 8 Trees with composition: lower, right, left, right, upper, lower, upper, universal Automatic lateral advancement. Bodpfx Aaex Syrkefecu Very versatile machine, suitable for both long pieces (with side loader) and short pieces (close-tow and grooved bed). Excellent degree of preservation.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 114550, working width: 230 mm, planing height: 120 mm, number of spindles: 6, Weinig Powermat 500 Four-Sided Planer and Moulder for planing and profiling solid wood on four sides. The machine features CNC control and the proven PowerLock quick-change system. Additionally, it is equipped with an automated return mechanism for the planed workpieces, ensuring optimum suitability for efficient production processes. Machine Configuration - 6 spindles 1st spindle: 7.5 kW, 8,000 rpm 2nd spindle: 7.5 kW, 8,000 rpm, PowerLock 3rd spindle: 7.5 kW, 8,000 rpm, PowerLock 4th spindle: 7.5 kW, 8,000 rpm, PowerLock 5th spindle: 7.5 kW, 8,000 rpm, PowerLock 6th spindle: 7.5 kW, 8,000 rpm, PowerLock Working width: 20 – 230 mm Working height: 8 – 120 mm Worktable length: 2.5 m (including straightening ruler) Top pressure rollers, spring-loaded Side pressure, pneumatically actuated Frequency-controlled feed with brake, feed speed: 5 – 30 m/min Reduced feed roller spacing between feed elements (400 mm) Additional feed rollers and shortened roller spacing Durofer steel feed roller, self-cleaning Infeed roller before the first bottom tool, pneumatically actuated Siemens/Powercom control system The machine is in very good and well-maintained condition, has been professionally operated and serviced regularly, and will remain in operation until 17.12.2026. Viewing of the machine in operation is possible by appointment at any time. Bcsdpjx Sxfvsfx Aafeu The technical description as well as the layout drawing of the machine can be found in the documents.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, working width: 230 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 230 mm, working height: 120 mm, overall weight: 16,000 kg, power of feed motor: 37,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 3,000 rpm, height adjustment type: electric, planer shaft diameter: 50 mm, type of input current: three-phase, number of spindles: 10, power: 574 kW (780.42 HP), input frequency: 50 Hz, Equipment: cabin, motor brake, rotational speed infinitely variable, Weinig Powermat 2500 10 Spindles, Working width: 230 mm, Working height: 120 mm, Spindle diameter: 50 mm, Feed: 37 kW / 12–120 m/min, Bcsdpex Svm Refx Aafeu Spindle configuration: 1- Bottom (22 kW) – with hydraulic clamping and fully automatic straight jointer 2- Right (11 kW) 3- Left (11 kW) 4- Top (37 kW) – with fully automatic straight jointer 5- Bottom (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 6- Top (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 7- Top (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 8- Bottom (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 9- Top (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 10- Bottom (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm Short infeed table, 1.3 meters (4 rollers), with 2 powered rollers above the table and 2 powered rollers in the table (both table rollers can be lifted). Table height adjustment with electronic digital readout. Incl. 2 heavy-duty side pressure rollers, 140 mm diameter, pneumatically actuated. Base supports, height 320 mm, for a table height of 1190 mm. Marathon POWER Coating for machine table, fences, and guide rails (excluding infeed table and special table surfaces). Special coating to protect table plates, fences, and guide rails from excessive wear. Recommended for processing abrasive materials (e.g., tropical woods, MDF, chipboard, plastics, metals). Automatic lubricant pump for table resin removal. Powered rollers in the machine table, hardened. Heavy-duty steel pressure rollers from above, diameter 120 mm, located in the area of the right and left spindle.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Equipment: rotational speed infinitely variable, For sale is a UC Matic 15 window production line as well as a Powermat 500 from Weinig, comprising the following main components: - Infeed mechanization - CNC machining center Unirex 2000 Bcodex Sqxhopfx Aafju - CNC end processing unit Unitec 15 - CNC longitudinal profiling machine Unicontrol 12 - Automatic double-part turning and return system - Outfeed buffer - Powermat 500 with mechanization The line is configured as an integrated production system for window and profile processing, enabling efficient and flexible manufacturing.

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, WEINIG four-sider U17A, year of manufacture 1982 with 7 spindles with universal spindle used Spindle arrangement: bottom-top-left-right-top-bottom-universal Motors: 4.0 - 3.0 - 5.5 - 7.5 - 5.5 - 4.0 - 4.0 kW Planing width approx. 170 mm Planing height approx. 120 mm Spindle diameter 40 mm Pneumatic pressure of the rollers Infeed before the jointer Continuously variable feed speed Bcjdpfox Sqdksx Aafsu Extraction port 7 x 120 mm Space requirement approx. 5200 mm x 1400 mm x 1500 mm Weight approx. 3000 kg

Condition: used, Year of construction: 2010, functionality: unexamined, Weinig RS 2000 Bedjwmw Dajpfx Aafecu

Condition: used, Year of construction: 1996, functionality: fully functional, working width: 180 mm, planing height: 120 mm, planing width: 180 mm, We are offering this used Weinig Quattromat 18 four-sided planer, year of manufacture 1996, ready for immediate operation. Bcjdpfxox Rvr De Aafou If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: excellent (used), Double-sided milling machine WEINIG uniplan Bcsdpfx Aaet Uh Dqsfsu

Condition: excellent (used), Weinig Unimat 22 planer. In very good working condition. Bcedpfsx Rrr Hex Aafju

Condition: ready for operation (used), functionality: fully functional, type of input current: three-phase, grinding width: 240 mm, Knife grinding machine WEINIG Rondamat 168 Max. tool diameter 3500mm Disk diameter 150mm Tool length 240 mm Bcodpjufcnqefx Aafju Main cutting edges up to 25° Motor 1, 1 kW

Condition: used, Year of construction: 1980, No. 3192 Four-sided planing machine WEINIG U 17 A Used, year of construction 1980, machine available from February 2025 Machine still in operation 6 spindles Arrangement of spindles bottom - right - left - top - bottom - bottom Working width 170 mm (with a tool flight circle of 125 mm) Working height 120 mm (with a tool flight circle of 125 mm) Joining spindle 4 HP All other spindles 5.5 HP Feed 2 or 3 HP Speed of the work spindles 6000 rpm Work spindles Ø 40 mm Smallest flying circle Ø of the moulder spindles 100 mm Largest flying circle Ø of the moulder spindles 180 mm Continuous feed, infinitely variable 6 - 18 m/min Transport roller Ø (hardened) 140 mm Transport roller width 50 mm Adjustment range of feed table and joining ruler right 10 mm Adjustment range of vertical spindles under table 40 mm Adjustment range of the horizontal spindles (axial) 30 mm Dressing table length 2 m Sale on behalf of customer, ex location Upper Austria, without disassembly, without transport and assembly Errors in description and price excepted Disassembly, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Bcjdpfxovkhcce Aafsu Terms of delivery: ex location

Condition: excellent (used), Year of construction: 2012, Weinig E3 infeed and A3 outfeed E3 Infeed Scissors lift before crossfeed. Bcjdpsx Rblpofx Aafeu Crossfeed table to infeed accelerator. Moulder infeed accelerator. A3 Outfeed Drop leaf. Crossfeed belt conveyor. Scissors lift with pack chains. pack outfeed chains.

Condition: excellent (used), Tenoning and Slotting Machine WEINIG Type 51 Pivoting studio window device with digital angle display Rolling table with automatic feed rate of 6 m/min. Rolling table length approx. 2,100 mm Pneumatic workpiece clamping Automatic countershaft change Crosscut saw Pneumatically timed 4-station turret Motor approx. 3 kW / 380/400 V / 50 Hz Saw blade diameter = 350 mm Saw blade speed 2,800 rpm Slotting spindle Diameter D = 50 mm Clamping length 320 mm Spindle motor approx. 11 kW / 380/400 V / 50 Hz Spindle speed 3,000 rpm Tool diameter max. 320 mm Length stop system Machine including operating tools Installation dimensions L x W approx. = 2700 x 2800 mm Weight approx. 2000 kg Note on used machines: • Errors in technical specifications and prior sale excepted. • Prices quoted are for pickup from the location - free shipping! • The machines have been cleaned and function-tested. • All machines are sold as seen without any warranty claims. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. Bcjdpfxov Tb Hgo Aafsu (We will only respond to inquiries if you provide your address and telephone number!)

Condition: used, Year of construction: 2014, Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Memory-Funktion Weinig Powermat 600 Compact ----- The machine has been cleaned and fully inspected. Bjdpswzmu Rofx Aafecu Brief Summary: ----- - 5 Spindles - Powerful Motors - Left and top spindles controlled for width and height Detailed Description: ----- Technical Data: Working Width: 20-230 mm Working Height: 10-120 mm Number of Spindles: 5 1st Spindle - Bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool Circle: 125-145 mm Tool Circle for Rebating Cutter: 130-160 mm Axially Travel: 5 mm Rebating Device MarathonCoatine for table insert in front of the 1st lower tool holder Electronic digital display for rotary adjustment 2nd Spindle - Right ----- Motor with brake: 11.0 kW Shared motor with left-hand tool holder Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. tool diameter behind fence: 180 mm Max. groove depth: 35 mm Axially travel: 55 mm 3rd Spindle - Left ----- Motor with brake: Shared motor with the 2nd spindle Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. groove depth: 35 mm Axially travel: 55 mm CNC-controlled radial spindle 4th spindle - top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads max.: 180 mm Max. groove depth: 35 mm Axially travel: 40 mm CNC-controlled radial spindle Split pressure shoe in front of upper tool holder, adjustable to the tool swing diameter and pivoting away from the tool, spring-loaded. Pressure shoe in front of, and discharge after, the upper spindle with electronic digital displays, integrated into the memory function or the PowerCom 5. Spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool travel: 93 - 200 mm Max. throat depth: 15 mm Axially travel: 35 mm Feed system ----- Electronic feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers with depth limiter and self-cleaning. Adjustment travel of the feed rollers relative to the left tool holder, axial 35 mm Machine electrical system ----- Operating voltage 400 V (voltage range 380–420 V), 50 Hz. All spindles IE2 design. Electrical design according to DIN VDE 0113, electrical equipment of industrial machines EN 60204, IEC 204-1. Other electrical regulations are not considered. Machine stand, tables, and ...

Condition: good (used), Weinig Hydromat H23 8 spindle 50mm spindles 6,000 RPM Bottom 7.5kW jointer ready Right 7.5kW straight jointer ready Left 15kW straight and profile jointer ready Right 11kW profile jointer ready Top 15kW jointer ready Bottom 18.5kw jointer ready Top 11kw straight and profile jointer ready + outboard bearing Bottom 7.5 kw straight and profile jointer ready + outboard bearing 7.5kW feed motor. Bcsdex N T Iyspfx Aafju Automatic lubrication system. Full heavy duty sound enclosure Possible to supply with moulder infeed and outfeed as needed. Possible to offer tooling if needed.

Condition: used, Working width from to 40-150 mm Working height from to 18-50 mm 0 6100 mm Finger jointing line Weinig Grecon Profijoint ----- Technical Specifications: ----- 1. Milling machine: ----- Material length at entry: 150-700mm Material width: 40-150mm Material thickness: 18-50mm Jointing options: horizontal and vertical joint Milling spindle power: 15 kW 2. Grecon PJ7/6100 Hydraulic Press for Joining: ----- Maximum length of finished element: 6100mm Material trimming saw Bsdpfsx H Alvjx Aafecu Saw diameter: 350mm Cutting unit power: 2.2 kW Without tools (techncial details according to manufacturer, with gurantee)

Condition: excellent (used), functionality: fully functional, Working width: 230 mm Working height: 160 mm Number of spindles: 5 Spindle configuration: 1. Bottom 15 kW 2. Right 11 kW 3. Left 11 kW 4. Top 15 kW 5. Bottom 7.5 kW Spindle speed: 6000 rpm Spindle diameter: 50 mm Bcodpfxsx Hzv To Aafsu 3 feed rollers in the work table Feed speed adjustable via inverter up to 60 m/min Feed driven by cardan shaft Pneumatic pressure rollers Technical documentation Machine dimensions: 300x180x170 cm (H) Weight: 3500 kg