Used Weinig Spare Part for sale (543)

Condition: reconditioned (used), Year of construction: 1979, saw blade height Raimann 90 mm chain width 250 mm after regeneration machine completely renovated engine 22 kW cutting width 250 mm shaft diameter 80 mm drive from the main engine to the shaft using a flat belt Knedeh Rv Eyjpfx Abzsb

Year of construction: 1990, condition: reconditioned (used), 4-sided planer unimat U23, 7 heads 4-sided Weinig 7-head planer, 7 universal arrangement: horizontal, lower vertical, right, left, vertical, right, vertical, upper horizontal, lower horizontal, and the last universal. The drive is realized by means of cardans. The drive is secured with Rotax clutches. Pressure of the element using pneumatics. Feed smoothly regulated by an inverter. Machine feed 0-42 m/min. 2.5 kW and 7.5 kW engines. Grinding table and a new one. Additionally, new wiring and new electrics. The machine has been completely renovated. Warranty . Kodpfxjpqxnxe Abzsnb

Condition: reconditioned (used), Year of construction: 1985, functionality: fully functional, 4-sided 8-head planer. Kedpsvtpk Hsfx Abzsnb head arrangement: lower horizontal, right vertical, left vertical, upper horizontal, right vertical, lower horizontal, upper horizontal, and the last universal, a new inverter and new cables were installed, smooth feed regulation. The machine has been completely renovated. Weight 4600 kg

Condition: used, Weinig Powerlock L=240 Z=2 head with rebate cutter below Type 536, diameter 93 mm 536.095.04 Centrolock reversible knife system Z2 Mounting: PowerLock HSK Kjdpezdq Htefx Abzsnb Length: 240 mm Price: 425 Euro

Year of construction: 1999, condition: ready for operation (used), Working width: 230mm, working height: 160mm, number of spindles: 5, spindle diameter: 50mm, spindle power: 4x 5.5kW/2x 11kW, feed rate: 24m/min, input table length: 3000mm, vertical spindle axial stroke: 80mm, horizontal spindle axial stroke: 45mm. Connected load: 126kW, air requirement: 8400-9600m³/h, machine dimensions X/Y/Z: approx. 3500mm/2000mm/1800mm, weight: approx. 3500kg. Including Weinig EM-11 slide-in unit and suitable distributor for the extraction system. Documentation available. On-site inspection is possible. Knsdou Damdopfx Abzeb

Condition: good (used), Year of construction: 1966, functionality: fully functional, Milling fence with fine adjustment Sliding table Crosscut saw Knodjx U Dfgepfx Abzsb Aigner table extension with Holz-Her ETZ feed unit, 8 speeds 380 Volt Shipping possible at extra cost!

Condition: good (used), Year of construction: 2019, Weinig Conturex C124-L CNC Window production machine (in left side infeed composition) Also available C124 R (Right-side infeed) year 2010 Description; Year of construction: 2019 Working width 40 - 260 mm Working height 25 - 150 mm Ratio of wood height to width max. 2:1 Powergrip clamping table Table support length 2x 2280 mm Workpiece length without follow-up cycle 175 - 2700 mm Workpiece length with follow-up cycle 2700 - 4500 mm Workpiece length with multiple follow-up cycle 4500 - 6000 mm Kjdpfx Absyvh Eyszjnb Full description on request Available approx. end of 2026 / January 2027 (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen vorbehalten! Keine Garantie auf gedruckte Daten!. Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 121386, Weinig automatic infeed system Kodpfoyt R S Njx Abzonb For continuous feeding of uniform and random length pieces into a planer/moulder with short infeed table. Flat magazine with accelerator, Workpiece dimensions: 1800 - 6100 mm Touch control for forward and reverse movement 4-roller accelerator. With four driven feed rollers. The first two feed rollers are electro-pneumatically moved via light barrier. Drive motor frequency controlled 3 kw Infeed speed 10 - 120 m/min. Height adjustment to workpiece thickness manually via hand crank The accelerator is operated from the control panel fitted to the accelerator. The feed speed is adjusted by a potentiometer with digital readout. Transport length x width approx. 1800 x 6500 mm Possible to supply with moulder Powermat 2400, year of production 2015 The price of a complete set 69000

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, Auction of a Weinig finger jointing machine! Knsdpsx Rbl Nofx Abzob

Condition: excellent (used), functionality: fully functional, Working width: 230 mm Working height: 160 mm Number of spindles: 5 Spindle configuration: 1. Bottom 15 kW 2. Right 11 kW 3. Left 11 kW 4. Top 15 kW 5. Bottom 7.5 kW Spindle speed: 6000 rpm Spindle diameter: 50 mm 3 feed rollers in the work table Feed speed adjustable via inverter up to 60 m/min Feed driven by cardan shaft Knsdpfx Aex Hzv Tobzjb Pneumatic pressure rollers Technical documentation Machine dimensions: 300x180x170 cm (H) Weight: 3500 kg

Condition: used, Year of construction: 1997, SECOND-HAND 5 SPINDLES MOULDER WEINIG MOD. PROFIMAT P23E - CE RULES - Horizontal bottom 5.5Kw Knedpfx Aowrxuwsbzsb - Vertical right/left 7.5Kw - Horizontal top 7.5Kw - Horizontal bottom 4Kw - Year 1997 (CE)

Condition: used, Year of construction: 2002, SECOND-HAND 5+1 SPINDLES MOULDER WEINIG MOD. PROFIMAT 23 FORTEC - CE RULES - ATS device - 1st horizontal botom - 2nd vertical right - 3rd vertical left Kodpewrx Nbjfx Abzenb - 4th horizontal top - 5th horizontal bottom - 6th universal - Working width mm. 230 - Cardan feed - Year 2002

Condition: excellent (used), Complete board sizing line consisting of roller conveyors, destacking device, transport table, Haist saw, Weinig Hydromat 22 AL four-sided planer with tooling, and a stacker. Kodpfxewz Id Tj Abzjnb

Condition: good (used), WEINIG Quattromat four-sided planer max planing width 220mm max planing height 120mm 4 heads, heads included Knodpfx Abov Hqn Tezob bottom spindle - 4KW, right and left 7.5KW, top - 5.5KW feed on cardan shafts with smooth adjustment electric lifting up and down electric adjustment of planing width branded machine preserved in good condition

Condition: used, Year of construction: 1997, diameter - cutter special 30 mm draw-in arbor diameter 40 mm clamping height 310 mm Knedpsv Uchbsfx Abzeb circle diameter 80-300 mm weight 30 kg

Condition: excellent (used), Weinig Hydromat 23C with 6 Spindles. Max width 245mm Max Thickness 160mm Separate electrical panel. Separate remote control panel Automatic lubrication system for bedplates Full heavy duty sound enclosure. 15kW feed motor 100m/min No 1.  11kw - Bottom 6000rpm straight jointer prepared Kodpfxsyl Rmqs Abzonb No 2. 11kw - Right 6000rpm straight and profile jointer prepared No 3. 15kw - Left 6000rpm straight and profile jointer prepared No 4 . 15kw - Top 6000rpm + Outboard bearing + straight and profile jointer prepared No 5 . 30kw - Top 6000rpm + Outboard bearing + straight and profile jointer prepared No 6 . 15kw - Bottom 6000rpm + Outboard bearing + straight and profile jointer prepared 50mm spindles Beam 0.55kW Full documentation included. Heavy duty sound enclosure. Possible to supply with hydro tooling if needed. Possible to supply with full mechanisation if needed.

Condition: good (used), With the OptiControl instrument measuring system from WEINIG, you can optically measure drills, PowerLock and hydraulic instruments and transmit the highly accurate measurement results to the woodworking machine. The device's 20x optical magnification ensures accurate measurement results. The measurement results are transmitted to the planer via a computer and the PowerCom software. The machine can also create completely new profiles. OptiControl PowerCom offers you: measuring instruments recording data from measured instruments creating new profiles Online data transmission optimization of work tasks time saving when setting up the planerTool measuring stand for measuring tool radius and height. Measurements can be read of digital read-outs. Technical details Tool diameter min - 100mm Knsdpfoyl Rm Rjx Abzsb Tool diameter max - 300mm Tool length maximum - 330mm 220v - 50hz Weight - 180 kg Supplied with operating instructions.

Condition: ready for operation (used), Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 40/50 mm Weinig Unicontrol 6 ----- Machine will be checked in our factory before delivery! Technical Data Summary (Please inquire about any additional accessories included) Item 1: Cut-off saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.0 kW > Laser guide light for identifying the saw cut CNC-controlled length stop ----- > Length: 3,600 mm > Electronic length stop including positioned cut-off saw Item 2: Tenoning spindle ----- > Number of tools: 3 (stroke 2 x 100 mm) or 4 (Stroke 3 x 80 mm) > Tool clamping length: 320 mm > Pneumatic vertical spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 3000 rpm > Maximum tool swing diameter: 320 mm > Spindle diameter: 50 mm Knedpextvgkjfx Abzeb > Maximum tool diameter: 360 mm > Motor power: 11 kW Item 3: 1. Profiling spindle (co-rotation and conventional) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Maximum tool swing diameter: 232 mm > Motor power: 7.5 kW Item 4: 2. Profiling spindle ----- > Position: Vertical right > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Pneumatic vertical spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Maximum tool swing diameter: 232 mm > Motor power: 11 kW 2 axially indexed feed rollers opposite the profiling spindle, for the production of narrow, short parts (e.g., glass-dividing muntins) Munch guide consisting of: Munch support strip from above in the area of ??the vertical right-han d profile milling unit and profiling spindle. Item 5: Horizontal top profile milling unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Spindle speed: 5,850 rpm > Maximum tool swing diameter: 130 mm > Axial travel: 52 mm, indexed in 2 positions > Radial travel: 125 mm, indexed in 2 positions Item 6: 3rd profiling spindle (fitting spindle) ----- > Position: Vertical right > Tool clamping length: 160 mm > Axial travel: 90 mm, indexed in 3 positions > Radial travel: 100 mm, indexed in 2 positions > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Maximum tool swing diameter: 210 mm > Motor power: 3.0 kW Further features ----- > Electric feed height adjustment including mechanical digital display and manual feed bar clamping > Rebating device for tear-out-free rebating > Double part package > Return conveyor for 1-person operation: swivel conveyor > Screen control > Angled window device > Electronic angle display for angled windows > Industrial PC with Windows PC control/NEXUS Extraction nozzle diameter: ----- Crosscut saw 80 mm Tenoning spindle 140 mm Profile spindle 1 140 mm Profile spindle 2 140 mm Grooving device from above 80 mm Hardware spindle 120 mm -----...

Condition: used, Year of construction: 1987, with reversible knives - structure reversible plate headsused, good conditionmake Weinigtype Profimat P22Myear of construction 1987machine . 2261149Number of spindles 4Spindle arrangement u-re-li-oMotors kW 4 - 5.5 -5.5Planing width approx. 220 mmPlaning height approx. 120 mmSpindle diameter 40 mmTable length approx. 2000 mmKnife system - indexable inserts - build-on headsFeed cutterCardan feedProtective coverTable lubrication lubricant pumpInfeed before planerFeed speed infinitely variable 5-22 m/min.2.2 kWprofilingslide rollers 1 piece drivenelectric adjustment thicknessing shaftdigital displayssuction connection 120 / 120 / 120 /140 mmspace requirement approx. 3300 mm x 1750 mmweight approx. 1300 kgstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in actual condition, as inspected,without guarantee and warranty Kodsvwfptjpfx Abzenb

Condition: used, Year of construction: 1980, with 7 shaftswith unispindleusedWeinigtype U17Ayear of construction 1980machine . 11881959spindle arrangement u-re-li-re-o-u-unimotors 4.0 - 3.0 - 5.5 - 7.5 - 5.5 - 4.0 - 4.0 kWplaning width approx. 170 mmplaning height approx. 120 mmspindle diameter 40 mmpneumatic pressure of the rollersinfeed before the planerfeed speed infinitely variablesuction connection 7 x 120 mmspace requirement approx. 5200 mm x 1400 mm x 1500 mmweight approx. 3000 kgstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery as is, as inspectedwithout guarantee and warranty Knsdjvwfqdspfx Abzsb

Condition: used, Year of construction: 2007, from training workshop, public institution, chrome-plated stops and machine table used, excellent condition, low hours, top equipment Manufacturer: Weinig Model: Unimat 300 Year of manufacture: 2007 Number of spindles: 5 Spindle arrangement: bottom-right-left-top-bottom Motor brakes Motor ratings: jointer: 5.5 kW right and left: 7.5 kW each top: 5.5 kW bottom: 5.5 kW Knedpfxovwghkj Abzsb Planing width approx. mm: 20-230 Planing height approx. mm: 8-160 Spindle diameter mm: 40 Table length approx. mm: 2000 Preliminary cutter Pneumatic pressure rollers Protective hood Table lubrication via lubricating pump Feed before jointer Feed speed stepless 5-30 m/min. Profiling diameter: 125 – 200 mm Electronic thickness adjustment Complete digital displays incl. profiling Location: 97447 Gerolzhofen, loaded free on truck, unpacked Transfer in current condition, as inspected, without warranty or guarantee.

Condition: good (used), Year of construction: 2006, machine/vehicle number: 108111, functionality: fully functional, working width: 240 mm, planing height: 160 mm, working height: 180 mm, Four-sided planer after service inspection, machine weight 3900 kg Kjdpjvrq U Dsfx Abzenb

Condition: like new (used), Year of construction: 2022, operating hours: 500 h, functionality: fully functional, Drying paternoster for finger-jointed boards Consisting of: - Transfer chain to finger-jointing press (foldable) - Drying paternoster (approx. 7 m, board length up to 6 m) - Cutting and zero-cutting saw - Conveyor belt for waste wood disposal Knjdpowclkyofx Abzsb - Stacking machine - Strip magazine not for sale - Package cross conveyor The machine is in very good condition and has had very little use. The machine is still assembled but available immediately.

Condition: excellent (used), Rondamat R 934, year 1997, in very good condition. Kodpexiv S Eofx Abzsnb

Condition: excellent (used), Weinig Profimat 23 four-sided planer Working width 230mm Working height 120mm Number of spindles 5 Spindle arrangement: Bottom 4kw Right Left 11kw Top 11kw Kjdpevyr Hksfx Abzenb Bottom 11kw Pneumatic material clamps Adjustable feed speed 5-22m/min Entry table length 2470mm Feed motor with a power of 4kw CE certificate Diameter of exhausts 5x140mm Machine dimensions 400x150x165cmH Weight 2300kg