Used Wedge Bar for sale (14,492)

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 2 h, functionality: fully functional, machine/vehicle number: 002331512500001478, pressure (max.): 14 bar, REKO H 510/150 piston compressor incl. operating hours counter incl. 150 litre compressed air tank Hours: 6.00 Bh Year: 2025 Maximum pressure: 14 bar Flow rate (14 bar): 500 l/min Nominal power: 4.0 kW Cylinder : 2 Mains voltage: 400 V Compressor speed: 785 min-1 Compressed air tank: 150 liters Dimensions: 1345 x 457 x 1112 mm Kljdpfeypm Sdex Ahvjp Weight: 135 kg We always have a wide range of new and used compressors in stock!

Condition: used, Bar contactor, DC contactor, contactor, DC switch, power contactor, circuit breakers, high voltage switches ABB Type NORR63-03 CC-SP FPL7146886R6000 CTC2014028R0001 Contactor Type: normally closed Main contacts Design: open mounted on ingots Drive: Alternating current + bleached magnetic circuit +rectifier + economy resistor Klsdpfx Ahefipfuovjp Drive Nominal voltage: 220-230 V / 50-60 Hz Main contact rated current: 63 A Main contact Nominal voltage: 1500 VDC Number of main contacts N/O contact: 0 Number of main contacts normally closed: 3 Number of auxiliary contacts: 1 NC contact + 1 NO contact + 1 changeover contact Auxiliary contact rated current: 6 A - Main contacts with deion chambers for fast spark quenching Dimensions W x H x D: 410 x 250 x 195 mm Weight: approx. 9 kg Used but in very good condition

Condition: used, Hydraulic unit for mobile clinching tongs or mobile shaper ECKOLD type HA 500 / 2 Serial No. 737 / 783 Year of construction 1991 Hydraulic unit type HA 500 / 2 Operating pressure 50 - 500 bar adjustable Delivery rate 2.6 l/min Tank capacity 16 liters Engine power (hydraulics) 3 kW Rated power 3.1 kW Mains connection 380 Volt, 50 Hz. Control voltage 24 Volt, DC - Pressure line with screw coupling - With HAWE GS 2-2 solenoid valve - Mobile on 4 swivel castors Klsdpfx Aequzfcehvjp Weight without hydraulic oil 125 kg good condition

Condition: new, Year of construction: 2025, overall weight: 400 kg, total length: 1,800 mm, total width: 700 mm, total height: 1,700 mm, volume flow: 102 m³/h, operating pressure: 16 bar, pressure (min.): 6 bar, pressure (max.): 20 bar, type of cooling: air, Equipment: refrigerant dryer, type plate available, Highly efficient screw compressor with 15 kW / 16 bar Complete 4-in-1 unit Frequency-controlled servo motor 500 liter air receiver Refrigeration dryer 4-stage fine filter New machine, delivery time approx. 1 week Klsdpfx Aheyll Ensvsp We are happy to demonstrate the machine at our premises. Highly efficient, permanently excited servo motor Frequency-controlled / load-dependent For clean and dry compressed air Suitable for laser applications With animated color display Single-stage screw unit Air-cooled Durable and low-maintenance Leasing or hire purchase available through our financing partner Sale exclusively to commercial customers. Delivery / consultation / sales only in Germany / Austria Technical data (approx.): Length: 1.8 m, Height: 1.80 m, Width: 0.6 m Weight: approx. 450 kg Pressure: 16 bar (maximum: 20 bar) Free air delivery: approx. 1.7 m³/min. at 10 bar

Condition: used, 2x 6-spindle bar automatics as a package Make: INDEX Kjdpfx Aheylhlqovolp Model: MS25E (1 machine defective, used as a parts donor)

Condition: used, Year of construction: 1987, 6-spindle bar automatic lathe Manufacturer: INDEX Model: MS25 Kedow S Hd Sjpfx Ahvslp Year of manufacture: 1987

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, spindle motor power: 2,200 W, turning length: 135 mm, spindle speed (max.): 8,000 rpm, turning diameter: 12 mm, overall weight: 1,400 kg, rotational speed (max.): 8,000 rpm, rotational speed (min.): 100 rpm, type of input current: AC, bar passage: 12 mm, feed length Z-axis: 120 mm, total width: 770 mm, total length: 1,500 mm, bar diameter (max.): 12 mm, working length: 135 mm, rapid traverse X-axis: 21 m/min, rapid traverse Y-axis: 21 m/min, rapid traverse Z-axis: 15 m/min, input voltage: 400 V, power: 2.2 kW (2.99 HP), travel distance Z-axis: 120 mm, Equipment: documentation/manual, rotational speed infinitely variable, We are offering this well-maintained Cincom Lincom B2 sliding head lathe, year of manufacture 1999. Condition: Used, very good Description TECHNICAL DATA - Number of axes: 4 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12 mm - Max. machining length: 135 mm - Spindle speed: 8,000 rpm - Spindle drive power: 2.2 kW - Minimum C-axis resolution: 0.001 degrees SUB-SPINDLE - Max. bar diameter: 12 mm - Z-axis travel: 135 mm - Spindle speed: 8,000 rpm BUSH HOLDER 1 - Number of positions: 5 FRONT TOOLPOST - Number of positions: 3 BACKWORKING - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 V DIMENSIONS AND WEIGHT - Footprint: 1500 x 770 mm - Machine weight: 1,400 kg EQUIPMENT - CNC control: Fanuc - Parts removal device - Parts ejector - Coolant tank - Electrical transformer The machine is under power and can be inspected at any time. If you have any questions or require further information, please do not hesitate to contact us. Kljdpfxjynwgpj Ahvjp Disclaimer: Sale is exclusively to businesses within the meaning of § 14 BGB, not to consumers as defined by § 13 BGB. By placing an offer, the buyer confirms their commercial activity. All information in this advertisement has been provided to the best of our knowledge and belief. Errors, misprints, prior sale, and technical changes are expressly reserved. Only the characteristics specified in the written purchase contract are binding. The machine is sold without any warranty against material defects. Any warranty is excluded to the extent permitted by law. This exclusion does not apply to claims for damages arising from intentional or grossly negligent conduct or in the event of injury to life, body, or health. No guarantee or assurance of specific properties is provided. The machine is sold as inspected and under exclusion of any returns. Sale is ex works. Transport, loading, and shipping are at the buyer's risk and expense unless otherwise agreed in writing.

Condition: used, empty load weight: 5,450 kg, maximum load weight: 12,550 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2012, next inspection (TÜV): 04/2026, loading space length: 7,700 mm, loading space width: 2,500 mm, loading space height: 2,300 mm, loading space volume: 44 m³, total length: 7,700 mm, suspension: air, tire size: 385/65 22,5, tire condition: 30 %, color: blue, Year of construction: 2012, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, Equipment: ABS, tail-lift, truck registration, Reference Number for Inquiries: 408211 Krone, S 24 * Year of Manufacture: 2012 * ABS (Anti-Lock Braking System) * EBS (Electronic Braking System) * Tail Lift * Alloy Wheels * Air Suspension * Tandem Trailer * Load Securing Certificate to DIN EN 12642 Code XL * VDI 2700 EN 12195 Compliance * Duo-matic Air Coupling * 15-Pin Connector Plug * Lifting and Lowering Device * Rear Support Legs * Inspections: Main/Emission Inspection valid until 04.2026 * Suspension: Air * Gross Vehicle Weight: 18,000 kg * Unladen Weight: 5,450 kg * Payload: 12,550 kg * Permissible Gross Weight: 18,000 kg * Axle Manufacturer: BPW * Tyre Condition 1st Axle: 30% -- 30% - Tyre Size: 385/65 R22.5 * Tyre Condition 2nd Axle: 30% -- 40% - Tyre Size: 385/65 R22.5 * Tyre Sizes: 385/65 R22.5 * Internal Dimensions: L = 7700 mm, W = 2500 mm, H = 2300 mm * Internal Volume*: 44 m³ * Pallet Spaces: 19 * Trailer Brand: Krone * Body: Ewers Swing-Wall Semi-Trailer * Tail Lift: BÄR BC 2500 – Capacity 2,500 kg Disclaimer: Subject to change, prior sale, and errors excepted. More photos and videos can be found on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing * Application for all (export) documents * Procurement of export / customs license plates * Vehicle reconditioning: new tarpaulins, lettering, painting, etc. * Professional loading & load securing * TÜV inspections, registration service Kodpfx Aeynvzrohvolp * Transport of commercial vehicles Please contact our trained professionals for further assistance – we are happy to advise you.

Condition: used, empty load weight: 5,450 kg, maximum load weight: 12,550 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2012, next inspection (TÜV): 10/2026, loading space length: 7,700 mm, loading space width: 2,500 mm, loading space height: 2,300 mm, loading space volume: 44 m³, total length: 7,700 mm, suspension: air, tire size: 385/65 22,5, tire condition: 30 %, color: blue, Year of construction: 2012, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, Equipment: ABS, tail-lift, truck registration, Reference number for inquiries: 408301 Krone, S 24 * Year of manufacture: 2012 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Tail lift * Light alloy wheels * Air suspension * Tandem trailer * Load securing certificate DIN EN 12642 Code XL * VDI 2700 EN 12195 * Duomatic air connection * 15-pin connector * Lifting and lowering device * Rear support * Inspection: HU / AU 10.2026 * Suspension: Air * Gross vehicle weight: 18,000 kg * Unladen weight: 5,450 kg * Payload: 12,550 kg * Permissible gross weight: 18,000 kg * Axle manufacturer: BPW * Tire condition 1st axle: 30% -- 30% - Tire size: 385/65 R22.5 * Tire condition 2nd axle: 30% -- 40% - Tire size: 385/65 R22.5 Klodsynvzxopfx Ahvop * Tire sizes: 385/65 R22.5 * Internal dimensions: L=7,700 mm, W=2,500 mm, H=2,300 mm * Internal volume: 44 m³ * Pallet spaces: 19 * Trailer: Krone * Body: Ewers wall-swinging semi-trailer * Tail lift: BÄR BC 2500, lifting capacity 2,500 kg Disclaimer: Subject to change, prior sale, and errors excepted. More photos and videos available on our website. Our comprehensive services include, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing options * Processing of all (export) documentation * Ordering of export / customs license plates * Vehicle preparation: new tarpaulins, lettering, paintwork, etc. * Professional loading / load securing * TÜV inspections, registration service * Transport and delivery of utility vehicles Please contact our trained specialist staff— we are happy to advise you.

Condition: used, empty load weight: 5,450 kg, maximum load weight: 12,550 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2012, next inspection (TÜV): 04/2026, loading space length: 7,700 mm, loading space width: 2,500 mm, loading space height: 2,300 mm, loading space volume: 44 m³, total length: 7,700 mm, suspension: air, tire size: 385/65 22,5, tire condition: 30 %, color: blue, Year of construction: 2012, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, Equipment: ABS, tail-lift, truck registration, Reference number for inquiries: 40821 Krone, S 24 * Year of manufacture: 2012 * ABS (Anti-lock Braking System) * EBS (Electronic Braking System) * Tail lift * Alloy wheels * Air suspension * Tandem trailer * Load securing certificate DIN EN 12642 Code XL * VDI 2700 EN 12195 * Duomatic air connection * 15-pin connector * Lifting and lowering device * Rear support * Inspections: Main inspection (HU) / Emissions inspection (AU) valid until 04.2026 * Suspension: Air * Gross vehicle weight: 18,000 kg * Unladen weight: 5,450 kg * Payload: 12,550 kg * Permitted gross weight: 18,000 kg * Axle manufacturer: BPW * Tire condition 1st axle: 30% -- 30% - Tire size: 385/65 R22.5 * Tire condition 2nd axle: 30% -- 40% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Internal dimensions: L=7700 mm, W=2500 mm, H=2300 mm * Internal volume: 44 m³ * Pallet spaces: 19 * Trailer: Krone * Body: Ewers curtain-sider with swinging wall * Tail lift: BÄR BC 2500, lifting capacity 2500 kg Disclaimer: Subject to change, prior sale, and errors excepted. More photos and videos available on our website. Our extensive range of services includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing options * Assistance with all (export) documentation Ksdpfxjynvybe Ahvjlp * Order and provision of export / customs license plates * Vehicle preparation: new tarpaulins, signage, painting, etc. * Professional loading and load securing * TÜV inspections and registration service * Transport/logistics services for commercial vehicles Our trained staff will be happy to advise you.

Condition: used, empty load weight: 5,450 kg, maximum load weight: 12,550 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2012, next inspection (TÜV): 10/2026, loading space length: 7,700 mm, loading space width: 2,500 mm, loading space height: 2,300 mm, loading space volume: 44 m³, total length: 7,700 mm, suspension: air, tire size: 385/65 22,5, tire condition: 30 %, color: blue, Year of construction: 2012, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, Equipment: ABS, tail-lift, truck registration, Reference number for inquiries: 40830 Krone, S 24 * Year of manufacture: 2012 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Tail lift * Alloy wheels * Air suspension * Tandem trailer * Load securing certificate DIN EN 12642 Code XL * VDI 2700 EN 12195 * Duomatic air coupling * 15-pin connector * Lifting and lowering device * Rear support legs * Inspections: HU / AU valid until 10/2026 * Suspension: Air * Gross vehicle weight: 18,000 kg * Unladen weight: 5,450 kg * Payload: 12,550 kg * Permitted gross weight: 18,000 kg * Axle manufacturer: BPW * Tyre condition 1st axle: 30% -- 30% - Tyre size: 385/65 R22.5 * Tyre condition 2nd axle: 30% -- 40% - Tyre size: 385/65 R22.5 * Tyre sizes: 385/65 R22.5 * Internal dimensions: L=7700 mm, W=2500 mm, H=2300 mm Kledpfxjynvyhs Ahvjp * Internal volume*: 44 m² * Pallet spaces: 19 * Trailer: Krone * Body: Ewers swinging wall semi-trailer * Tail lift: BÄR BC 2500, lifting capacity 2500 kg Disclaimer: Subject to prior sale, changes, and errors excepted. More pictures and videos are available on our homepage. Our comprehensive services include, for example: * Purchase / sale / rental of commercial vehicles * Fast, uncomplicated financing * Arranging all (export) documents * Ordering of export / customs plates * Vehicle preparation: new tarpaulins, graphics, paintwork, etc. * Professional loading / load securing * TÜV inspections, registration service * Delivery of commercial vehicles Please consult our trained specialists, we are happy to advise you.

Condition: used, Year of construction: 2015, Technical details: number of spindles: 6 spindle passage: 22 mm ?Bar feeder complete is 4.70 meters - for 3 meters of material ?The machine is still on ?Materail to be processed on the machine: Steel ?Production with OIL Machine has only Single-NCU without PCU. The complete energy supply of all 6 main spindles was replaced in April 25. Kodpfx Asxc Idmjhvolp *

Condition: used, Year of construction: 2014, For inquiries regarding the vehicle, Mr. Seidel is at your service (by phone: r RZK/18 IV refrigerated box with tail lift). Cooling system: Carrier Supra 950U, tail lift: BÄR BC 2000S4-C4, BPW axles, permissible total weight: 18,000 kg, unladen weight: 6,980 kg, payload: 11,020 kg, cargo area dimensions: L 6,830 mm x W 2,490 mm x H 2,330 mm, loading volume: approx. 40m³, tire tread depth: 1st axle 5-7mm, 2nd axle 5-6mm. Upon request, we can offer you a leasing or financing option. Mr. Seidel (phone) is happy to assist you. You can find further information on our homepage. ... Errors, modifications, and prior sale excepted!!! = Further information = Gross vehicle weight: 18,000 kg Kledpfx Asynrhhjhvsp Cargo space dimensions (LxWxH): 10,350 x 2,600 x 3,730 Please contact Tobias Ebert for further information.

Condition: used, mileage: 83,031 km, power: 155 kW (210.74 HP), first registration: 02/2020, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 03/2027, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 6,450 mm, total width: 2,550 mm, total height: 3,450 mm, loading space length: 4,500 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, Flatbed truck & sliding tarpaulin, tail lift Bär 2000 kg, aluminium platform Trailer brake 2-line system Trailer coupling: central axle trailer G 135 Trailer socket 12V / 13-pin Trailer socket 24V / 15-pin Audio system: CD radio (Bluetooth, USB) Battery 165 Ah Differential lock, rear axle Medium air pressure unit Front axle suspension: 3.6 t leaf spring Electric windows LED lighting package Roof air deflector (adjustable, without base cover) Reinforced engine brake Extended frame overhang Tail lift switch Rear cross member for central axle trailer coupling Cab seats: driver's seat with armrest Cab seats: driver's suspension seat, comfort version Exterior sun visor Sunblind for driver’s door side window Reinforced rear axle stabilizer (for extremely high load) 24V socket in cab Emission standard EURO 6 Axle configuration: 4x2 Front axle load: 4.1 t Entry/front mirror Exhaust tailpipe towards vehicle center Exterior mirror, left side, electrically adjustable Classic cockpit Steel air tank Single-step entry Driver assistance system: brake assist (Active Brake Assist) Driver assistance system: lane keeping assist Cab type: S ClassicSpace Suspension: leaf/air Alternator 100 A Klodpfx Aheynqfxevsp Transmission: 6-speed automatic, type G 90-6 AdBlue tank: 25 liters Manual steel tilting roof Rear axle crown wheel 325 Info display 10.4 cm with additional indicators Fuel tank: 120 liters Engine 5.1 L – 155 kW diesel (OM 934) Engine compartment encapsulation Disc brakes front and rear Seat cover/upholstery: fabric Cab seats: fixed single passenger seat Rear mudguard spray protection Tachograph / EC recording device Fixed rear underrun protection Side underrun protection Toll collection preparation Immobilizer Towing coupling: ball head Wheelbase 3300 mm Gross vehicle weight: 7,490 kg Payload: 2,035 kg Tires: 215/75R17.5, 60% tread Vehicle ref. no. for inquiries: 2436 Vehicle in very good overall condition, well maintained by first owner; no liability for typographical or data transmission errors; subject to errors and prior sale. Daily cash purchase of commercial vehicles, construction machinery, trailers, and semi-trailers from model years 2000–2025. Leasing and financing possible through our partner bank. Rental possible. Nationwide delivery available.

Condition: used, mileage: 83,031 km, power: 155 kW (210.74 HP), first registration: 02/2020, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 03/2027, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 6,450 mm, total width: 2,550 mm, total height: 3,450 mm, loading space length: 4,500 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, Flatbed truck & sliding tarp with Bär 2000 kg tail lift, aluminum platform Trailer brake: 2-line system Trailer coupling: Central axle trailer G 135 Trailer socket: 12V / 13-pin Trailer socket: 24V / 15-pin Audio system: CD radio (Bluetooth, USB) Battery: 165 Ah Rear axle differential lock Medium air pressure unit Suspension: front springs 3.6 t Electric window lifters LED lighting package Roof air deflector (adjustable, without base trim) Reinforced engine brake Extended chassis rear overhang Tail lift switch Rear cross member for trailer coupling (central axle trailer) Cab seats: Driver's seat with armrest Cab seats: Comfort suspension driver's seat Exterior sun visor Side window sun blind, driver's door Reinforced rear stabilizer (for extremely high loads) 24V cab socket Exhaust standard EURO 6 Axle configuration: 4x2 Front axle load: 4.1 t Curb/Front mirror Exhaust pipe routed to vehicle center Left exterior mirror electrically adjustable Classic cockpit Steel air tank Single-step entry Driver assistance system: Brake assist (Active Brake Assist) Driver assistance system: Lane keeping assist Cab: S ClassicSpace Suspension: leaf / air Alternator: 100 A Transmission: 6-speed, type G 90-6 automatic AdBlue tank: 25 liters Manual roof hatch (steel) Rear axle gear set 325 Info display: 10.4 cm with additional indicator Fuel tank: 120 liters Engine: 5.1 L, 155 kW diesel (OM 934) Engine compartment encapsulation Kjdpsynqfrofx Ahvolp Disc brakes front and rear axle Upholstery: fabric Cab seats: Fixed passenger single seat Rear mudguards with splash protection Tachograph / EC control unit Fixed rear underride guard Side underride protection Toll logging preparation Immobilizer Tow bar with ball head Wheelbase: 3,300 mm GVW: 7,490 kg Payload: 2,035 kg Tires: 215/75R17.5 60% Vehicle ID for inquiries: 2436 Vehicle in very good overall condition, service maintained, one owner. No liability for typing or data transmission errors. Subject to prior sale and errors. Daily cash purchase of commercial vehicles, construction machinery, trailers, and semi-trailers from model years 2000-2025. Leasing and financing available through our partner bank. Rental option possible. Nationwide delivery available.

Condition: good (used), Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high-pressure pump, high-pressure hand pump, hydraulic hand pump -Manufacturer: FAG, hydraulic pump, hand pump -Type: ZPH 10/18 -Pressure range: max. 500 bar Klodpfx Ahshmgzwjvep -Quantity: 1x hand pump available -Price: per piece -Dimensions: 660/170/H200 mm -Weight: 6.8 kg/pc.

Condition: new, mileage: 10 km, power: 125 kW (169.95 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, number of seats: 3, loading space length: 4,300 mm, loading space width: 2,240 mm, loading space height: 2,380 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, tail-lift, * Renault Master New Model 2026 * Ultralight box body (30% more payload compared to standard box bodies) * Diesel particulate filter * Automatic climate control * DAB radio with Bluetooth * OpenR Link 10'' multimedia system * Navigation system available with: * Apple CarPlay * Android Auto * Qi induction charging pad * Rear parking sensors * Driver fatigue alert system * Traffic sign recognition system * Light sensor * Rain sensor * Lane keeping assist * Emergency braking assist * Side wind assist * ABS, ESP * 80-liter fuel tank * Extra-long, electrically adjustable exterior mirrors * On-board computer * Start/stop function * Mud flaps * Diesel particulate filter (EURO 6E) * Driver airbag * Multifunction steering wheel * Power steering * Cup holders * Full-size spare wheel * Fire extinguisher Kodpoynd Elefx Ahvelp * Electric windows * Central locking with remote control * Seats: Fabric * Central locking with remote control * Transparent roof (daylight entry) * Side box lockable * Interior lighting * Lateral underrun protection for cyclists * Lockable toolbox * Interior lighting * Side door lockable * BÄR tail lift 750 kg with roll-stop * Foot and hand remote controls * Long wheelbase * LED side marker lights * LED daytime running lights * LED low beam headlights * Fog lights * LED lighting in the cargo area / controls in driver’s cab * 8x lashing points for securing loads * Rear parking assist (PDC) * Rear-view camera (optional at extra cost) * Air suspension (optional at extra cost) If the vehicle is not in stock - short delivery times are possible! * Contact us for a customized leasing or financing offer * Net export available * Delivery from €199 Haven't found the right vehicle? Configure your own vehicle with us! Whether equipment, bodywork, or engine variant – all at a fair price! You can also purchase individual bodies for your existing vehicle! Do not hesitate to contact us! * Images may show optional equipment not included in the base price. The details published online are non-binding descriptions and do not constitute guaranteed characteristics. The seller is not liable for typo or data transmission errors / changes / input mistakes. Please check all vehicle features for accuracy directly on site before purchase. Subject to errors and prior sale. This advertisement is an invitation to submit an offer.

Condition: used, Used Bibby approximately 400 litre capacity 316 stainless steel vertical reactor. Unit bolted dished top and welded dished bottom heads. Approximately 750mm diameter x 950mm straight side. Internal rated 3.46 bar/full vacuum design pressure at 100 deg.c. External 316 stainless steel jacket rated 6.6 bar/full vacuum design pressure at 100 deg.c. Unit has top entry stainless steel agitator with Lightnin model LS25V drive. Unit is mounted on side support lugs. Specifications: Capacity: 105 gal Type of stainless: 316 Internal Pressure: 3.5 PSI Ksdoykn Rwepfx Ahvjlp Internal Temperature: 212°F Jacket Pressure: 95.8 PSI Diameter: 29.528" Straight Side: 37.402" Type Of Heads: bolted dished top, welded dished bottom Legs/Lugs: side support

Condition: used, Used Zetterstrom 912 litre capacity 316L stainless steel vertical reactor. Unit has welded dished top and bottom heads. Internal rated 6 bar design pressure at -35 to 180 deg.c. External stainless steel jacket rated 6 bar/full vacuum design pressure at 180 deg.c. Unit has top entry 3-tier stainless steel agitator direct diven by 3kW 220/380 volt 3/50 1440 rpm motor via Lightnin model LS400 gearbox. Also includes (3) baffles. Unit is mounted on side supports. Specifications: Capacity: 241 gal Type of stainless: 316L Internal Pressure: 6 PSI Internal Temperature: 180°F Jacket Pressure: 87 PSI Type Of Heads: Welded Dished Top and Bottom Legs/Lugs: Side Supports Kjdsykn Rkjpfx Ahvslp

Condition: repair required (used), Year of construction: 1996, functionality: fully functional, input voltage: 415 V, overall weight: 2,960 kg, power: 5.5 kW (7.48 HP), Lisec spacer bar bending maching BSV-45A, year 1996/2007, needs small repairs but is fully functional modified by Lisec in year 2007 to bend additionally stainless steel profiles (Nirotech, Chromatech Plus), electronic clamping pressure regulator for different material thicknesses. Last company was also bending TGI by using standard aluminium tools..... Machine is coming with bending tool for 16 mm aluminium Minimum frame size: 250 x 80 mm Kedpfertpuzsx Ahvslp Maximum frame size: 4000 x 2200 mm (split frame) Profile widths: 6-24 mm Running direction: left/right Power supply: 3/N/PE-50Hz-415V, 24VDC control voltage Shapes: according Lisec shape catalogue, including arc shapes (for aluminium only) 4-slot spacer bar magazin PM-45/4 Machine is complete and was in full operation unit dismantling During transportation small damages happend..... Can be seen in our warehouse in Hofkirchen/Austria on appointment

Condition: good (used), Year of construction: 1989, 1 x automatic lathe Traub TD 16 year of manufacture: 1989 with hydraulic single-bar feed LNS Hydrobar 3.16 -HS 4.4 Year of construction: 1989 Equipment: 6-fold star turret Material quick clamping. Kedpfx Ahsvga A Tovjlp Long turning device Central lubrication Vogel Accessories: see photos The machine can be inspected under power.

Condition: used, functionality: fully functional, machine/vehicle number: NEW-12, mileage: 369,394 km, power: 155 kW (210.74 HP), first registration: 02/2018, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, next inspection (TÜV): 02/2024, fuel: diesel, brakes: retarder, color: white, gearing type: mechanical, emission class: euro6, loading space volume: 47 m³, loading space length: 7,330 mm, loading space width: 2,500 mm, loading space height: 2,600 mm, Year of construction: 2018, Equipment: ABS, air conditioning, cruise control, onboard computer, retarder, tail-lift, For sale is a Mercedes Atego 1221 L with a box body from Lamberet and a tail lift from Bär. The Mercedes is in very good technical and visual condition. Vehicle data: - EZ: 02/2018 - Mileage: 369,394 km - MOT 02/2024 - SP 08/2024 - Euro 6 - FIN: WDB96702510222919 - Engine power: 210 HP - Tire size: 265/70R19.5 - Tread depth approx. 70% - 6-speed manual transmission - Total weight: 11,990 kg - Curb weight: 6,955 kg - Payload: 5,035 kg - Wheelbase: 4,730 mm - Retarder - Lane departure warning - Adaptive cruise control - Hill start assist - Air suspension rear axle - Disc brake - Multifunction steering wheel - Air conditioning - Driver's seat air-suspended - heated seats - distance warning - rear view camera - tail lift manufacturer: Bär, type: BC 1000 - body manufacturer is LAMBERET - internal dimensions of the body: length 7330 mm - width 2500 mm - height 2600 mm - roof spoiler - car can be used immediately Offer subject to change, input errors, changes, mistakes and prior sale reserved. Financing available on request. We are also happy to organize customs clearance for you. You can reach us by mobile or WhatsApp. Opening times: Mon-Fri 8 a.m. to 2 p.m. or by appointment. Price is NET/negotiable. Invoice with VAT shown will be issued upon sale. Location of the vehicle: Im Gewerbepark 11 99441 Umpferstedt Kjdpfx Asp Npytjhvelp

Condition: excellent (used), functionality: fully functional, machine/vehicle number: WMA06SZZ8HM742116, mileage: 938,000 km, power: 338 kW (459.55 HP), first registration: 03/2017, fuel type: diesel, empty load weight: 11,210 kg, maximum load weight: 6,790 kg, overall weight: 18,000 kg, tire size: 315/70 R22,5, axle configuration: 4x2, next inspection (TÜV): 03/2025, fuel: diesel, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 7,440 mm, loading space width: 2,490 mm, loading space height: 2,450 mm, Year of construction: 2017, Equipment: ABS, additional headlights, air conditioning, cooling unit, cruise control, differential lock, low noise, navigation system, onboard computer, parking heater, retarder, tail-lift, traction control, trailer coupling, For sale is a MAN TGS 18.460 with a Schmitz Cargobull refrigerated box body, with a Bär BC 2000 tail lift and a Carrier Supra 850 refrigeration unit. The vehicle is in very good technical and visual condition and is ready for immediate use. Vehicle data: - EZ: 03/2017 - Mileage: 938,000 km - HU 03/2025 - Euro 6 - FIN: WMA06SZZ8HM742116 - Engine power: 460 HP - Tire size: 315/70 R22.5 - Tread depth approx. 60% - Automatic transmission - Total weight: 18,000 kg - Curb weight: 11,210 kg - Payload: 6,790 kg - Retarder - Lane departure warning - Adaptive cruise control Kodpfsurih Sex Ahvolp - Blind spot camera - Hill start assist - Air suspension rear axle - Disc brakes on both axles - Multifunction steering wheel - Automatic climate control - Auxiliary heating - Navigation - Radio - Radio - Refrigerator - Driver's seat with air suspension - Seat heating - Rear view camera - Duomatic - Multiple work lights - LED Taillights - Wind deflectors - Air horns - Storage box - Tail lift manufacturer: Bär, type BC 2000 - Body manufacturer: Schmitz Cargobull - Cooling unit Carrier Supra 850 - Internal dimensions of the body: Length 7440 mm Width 2490 mm Height 2450 mm Offer subject to change, input errors, changes, mistakes and prior sale reserved. Financing available on request. We are also happy to organize customs clearance for you. Opening hours: Mon.-Fri. 8 a.m. to 2 p.m. or by arrangement. Invoice with VAT shown will be issued upon sale. Price is NET/ subject to negotiation Location of the vehicle: Im Gewerbepark 11 99441 Umpferstedt

Condition: excellent (used), Year of construction: 1984, For sale: professional Robatech RoBa 30 adhesive melter, Swiss-made (Robatech AG CH-5630 Muri). The unit is fully functional, complete, and ready for operation. Ideal for packaging lines, folder-gluer machines, cartoners, and equipment requiring precise hotmelt adhesive application. Technical specifications: * Model: RoBa 30 * Year of manufacture: 1984 * Output: 900 g/min Ksdpfsum Hufsx Ahvjlp * Max hydraulic pressure: 40 bar * Max air pressure: 5 bar * Max operating temperature: 200°C * Power supply: 240 V * Power consumption: 10 A * Pump ratio: 1:8 * Nameplate legible, pressure gauge operational Condition: * device in good technical condition * complete, with no missing parts * Swiss quality – very robust construction

Condition: used, mileage: 501,000 km, power: 294 kW (399.73 HP), fuel type: diesel, axle configuration: 4x2, wheelbase: 5,500 mm, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 9,610 mm, total width: 2,550 mm, loading space length: 7,400 mm, loading space width: 2,460 mm, loading space height: 2,380 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, cruise control, power mirror, tail-lift, traction control, Year of manufacture: 2020 Front axle: Steering; Suspension: leaf suspension Rear axle: Suspension: air suspension Empty weight: 9.300 kg Carrying capacity: 8.700 kg GVW: 18.000 kg Tail lift: BAR, tail lift, 2000 kg Registration number: 86-BZX-3 = Additional options and accessories = - Aluminium fuel tank - Climate control Kodpfeymz Insx Ahvslp - Comfort seat with heating - Heated driver's seat - Outside temperature display - Reversing camera - Visor