Used Water Heater for sale (12,900)

Condition: good (used), Year of construction: 2005, PureWaterPlant / Pharmaceutical water treatment plant Bwodpfxemfnv So Afgeu Make: LETZNER 400 ltr. / h with tank, piping, control box, etc. with operating instructions, etc.

Condition: ready for operation (used), Year of construction: 2018, Inlet medium: AP water, outlet medium: distillate, distillate outlet temperature: approx. 99°C, tank volume: 900l, number of preheaters/evaporator columns: 3/4, distillate production: 300l/h, pure steam production: approx. 70kg/h, operating modes: distillate production/pure steam production/WFI loop system sterilization, controls: Siemens SPS S7-300. The distillation unit was designed as part of an overall system but has its own control and automation and can be operated separately. Documentation available. An on-site inspection is possible. Bwsdpfx Asygmcdofgsu

Condition: new, Year of construction: 2026, functionality: fully functional, Our honeycomb heater plates are manufactured and assembled to Clako’s own unique design. Bedpfx Afsyznu Sogewu 1 Zone, 2 Zone + 4 Zone Heater Plates are manufactured by our own engineer to fit your Cylinder, Platen, Saroglia and Clamshell machines. Strong, durable & available in high grade hardened steel or lightweight toughened aluminium to suits your needs. All of our honeycomb plates are machined to true flatness. Dies (cliches) secure to our plates using low height toggles. Contact our team for details and price.

Condition: used, Year of construction: 2022, cooling capacity: 241 kW (327.67 HP), type of cooling: water, empty load weight: 2,200 kg, We are offering directly on behalf of the owner: DAIKIN EWAT240B-SLB2016 – air-cooled chiller Bwjdpfxez Dx E Io Afgju Manufacturer: DAIKIN Type: EWAT240B-SLB2016 Year of manufacture: 09/2022 Nominal cooling capacity: 241 kW Compressor: 4 × Scroll Refrigerant: R32 Refrigerant charge: 19 kg Temperature range TS: -20 / +150 °C EQUIPMENT / OPTIONS - OPTION-04 Compressor direct start (DOL) - OPTION-10 Second setpoint - OPTION-128 Master/Slave control, max. 4 units - OPTION-57 Evaporator auxiliary heater - OPTION-60 Electronic expansion valve - OPTION-67 Ambient temperature sensor and setpoint adjustment - OPTION-68 Operating hour counter - OPTION-69 Collective fault message - OPTION-70 External alarm contact - OPTION-97 Main switch - OPTION-11 Thermal protection relay for compressor - OPTION-21 Evaporator flange connection kit - OPTION-58 Evaporator flow monitor - OPTION-61 Hot gas shut-off valve - OPTION-62 Suction gas shut-off valve - OPTION-75 Rubber vibration dampers - OPTION-78 Single pump standard ESP - OPTION-91 Safety valves in double design with changeover valve - OPTION-96 Fan protection switch Weatherproof design: Standard housing with roof Dimensions unit (L x H x W): 2,326 x 2,540 x 2,236 mm Weight: 2,206 kg ELECTRICAL DATA Power consumption: 85.2 kW Voltage: 400 V / 3~ / 50 Hz Rated current: 190 A CIRCULATION PUMP Manufacturer: Wilo Type: IP-E 80/115-2.2/2-IE4 Power input P1: 2.6 kW Speed range: 750–2,940 min⁻¹ BUFFER TANK: FlexTherm PS-K Volume: 1,000 l Including insulation Cooling chamber with coil: Design: WK-com S-W B170/B318 supply air Technical data cooling coil: Air inlet T/RH: 35.0 °C / 40 % RH Air outlet T/RH: 20.0 °C / 82 % RH Medium flow rate: 32,140 / 33,563 l/h or kg/h Capacity: 169.4 kW Control: 3-way valve + control manifold IP69 Switch cabinet for pump and control of the regulation

Condition: good (used), axle configuration: 3 axles, first registration: 02/2006, tire size: 385/55R22.5, Year of construction: 2006, = Additional Options and Accessories = - Air suspension = Notes = Bwsdpfszn Uzpox Afgsu W09SAV3355BF21345 Finkl 3 as 2006 Steering axle Lift Vans water lift = Further Information = Tire size: 385/55R22.5 Rear axle 1: Tire tread depth left: 30%; Tire tread depth right: 30% Rear axle 2: Tire tread depth left: 30%; Tire tread depth right: 30% Rear axle 3: Tire tread depth left: 30%; Tire tread depth right: 30% Unladen weight: 13,000 kg Technical condition: good Optical condition: good Please contact VAEX The Truck Traders for further information.

Condition: reconditioned (used), functionality: fully functional, Powerful three-phase motors and easy adjustment of angles and milling depths make the WSK8-3 the optimal machine for your custom production. • Automatic start when the control levers are operated • Upper milling unit continuously swivels up to 45° • Simple setting of units using scales and stops • Easy adjustment to various profile systems Bodpfxox U Ampj Afgswu

Condition: used, This listing is for a Grant QBD1 Digital Dry Block Heater. (1 of 2 available) The unit is in full working condition and is ready for immediate release. The Grant QBD1 is a versatile laboratory dry block heater with digital temperature control and capacity for one removable, interchangeable heating block. It provides an ambient +5°C to 130°C temperature range, with ±0.1°C stability and uniformity. Dimensions are approximately 200 x 240 x 120 mm and weight is 2.2 kg. Heating blocks are interchangeable and purchased separately Transparency Report and Technical Audit: Software and Media Disclosure: Bjdpfx Ajxv Dvlefgowu As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the mos

Year of construction: 2019, condition: excellent (used), functionality: fully functional, machine/vehicle number: Trans Smart 555, Fully automatic steam sterilizer. The unit features a range of pre-set programs for the most common sterilization processes used in hospital and general applications. Program cycles employ mechanical air extraction with a series of vacuum/pressure pulses to effectively remove air, ensuring proper sterilization. The chamber dimensions are adapted for sterilization, accommodating wire baskets according to ISO and STU or containers according to DIN. The unit has a capacity of up to 555 L. The temperature range is from 121°C to 135°C. Bwodpfx Asy Iplljfgou Key Features Chamber and lining made of AISI 316L stainless steel. Automatic vertically sliding doors. Drying system. Process monitoring. Built-in printer.

Condition: used, Year of construction: 2003, Manufacturer: Falch Hochdruck-Strahlsysteme GmbH Vehicle type: Tandem trailer Type No.: H692.03 Year: 2003 Permitted gross weight: 2600 kg Axle load: 1–1300 kg / 2–1300 kg Bwodpfxew Sdxyo Afgou

Condition: used, Year of construction: 2017, functionality: fully functional, Rotox FWS 381 Bedpfxjzpygye Afgswu

Condition: excellent (used), Year of construction: 2015, input voltage: 400 V, input current: 70 A, input frequency: 50 Hz, type of input current: three-phase, For sale: an industrial induction melting and holding unit, model IH-40-HNK, manufactured by INDUCTOR Kft. The unit was manufactured in 2015 and features a water-cooled, medium-frequency induction system. Bwjdpfx Afszy Ng Rjgeu Technical Specifications Manufacturer: INDUCTOR Kft. Model: IH-40-HNK Year of manufacture: 2015 Power output: 40 kW Supply voltage: 3 × 400 V / 50 Hz Rated current draw: 70 A Water-cooled inductor Stainless steel, insulated melting vessel Estimated vessel capacity: approx. 200 liters Modern medium-frequency IGBT power electronics PLC/HMI control system Control cabinet weight: 190 kg Applications Aluminum melting Aluminum holding Foundry operations Metal processing plants

Condition: excellent (used), For sale: complete fire-fighting trailer equipped with a professional ALCO MONITOR water cannon. The set is fully mobile – ideal for fire brigade use, fire protection, and securing large areas (fuel depots, sawmills, production plants, storage yards). Technical condition: • ALCO / MONITOR water cannon – heavy-duty cast iron construction • Full adjustment of direction and spray angle (control wheels) • Directional nozzle on extended boom • KALI Anhänger Service GmbH trailer, GVW 700 kg • Hitch: Peka Fahrzeugbau, type DV127 • Two side tanks with filling ports • Shut-off valves, fire-fighting quick couplings • Stabilizing supports with height adjustment • Lighting installation, fenders, wheels in very good condition • Well-maintained, complete, ready to use Applications: • Voluntary/Professional fire brigades • Large production facilities • Timber yards, sawmills • Chemical and fuel plants • Securing mass events Bwsdpfxox Edrrj Afgeu • Extinguishing fires from a great distance / high water flow

Condition: excellent (used), Year of construction: 2003, operating hours: 3,200 h, functionality: fully functional, fuel: diesel, Hammelmann HDP 232, 1000 bar, 110 liters, CAT engine, in very good condition! Bodpfsz E S Dmex Afgewu

Condition: used, Year of construction: 2023, machine/vehicle number: 8102046714, Used Atlas Copco Oil-Water Separator OSC 1250 For compressors with a free air delivery (FAD) of up to 75 m³/min The OSC 1250 is used and in good condition. The scope of delivery includes 4 new filter bags (see photo). Technical Data: Flow rate (with dryers and filters): Max.: 1,250 l/sMin.: 608 l/sFlow rate (without dryers and filters): Max.: 1,563 l/sMin.: 839 l/s Residual oil content at outlet: max. ≤10 mg/l Bedpfxez D Udys Afgswu Connections: Condensate inlet: 2 x ¾" Water outlet: ¾" Test connection: ¼" Dimensions: Width: 800 mm Height: 960 mm Length: 850 mm Weight: 91 kg Visit our showroom in Erlangen, Germany.With over 450 m² of exhibition space, you will find a wide selection of both used and new compressors.

Year of construction: 2020, condition: used, This listing is for Puro-i III | RO Water Purification System The unit is in full working condition and ready for immediate use The Avidity Science Puro-i III is an integrated reverse osmosis water purification system designed to produce Type III laboratory water directly from potable tap water. Depending on configuration, the system provides production rates from 5 to 30 L/hr, with dispensing at up to 2 L/min. Features include twin-pass RO technology, automatic RO sanitisation and an interactive touchscreen interface. Typical specifications include Type III water production, up to 99% inorganic rejection and feed-water pressure of approximately 0.5–6 bar. Available configurations include different production rates, reservoir conductivity monitoring and loop options Bjdpsz D H D Eefx Afgewu Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: used, functionality: fully functional, mileage: 34,000 km, power: 161.81 kW (220.00 HP), axle configuration: 4x4, fuel: diesel, Year of construction: 1995, Equipment: additional headlights, all wheel drive, trailer coupling, Are you looking for a reliable and affordable emergency vehicle for your fire department? Then you have come to the right place! From our immediately available stock of used vehicles, we offer: Water Tank Firefighting Vehicle TLF 16/25 ALL-WHEEL DRIVE 4x4 Magirus on IVECO 135E22 The TLF 16/25 is the proven combination of the advantages of crew fire engines and water tank firefighting vehicles. With a squad crew and ample space for firefighting and rescue equipment, the vehicle is prepared for most operational scenarios. General Data: • Year of manufacture: 1995 • Mileage: approx. 34,000 km Chassis: • IVECO 135E22 4x4 with 220 HP (159 kW) • Diesel engine with manual transmission Bwjdpjxk T Efjfx Afgou Cab: • Standard, spacious crew cab (1+5) in RAL 3000 (fire red) • Mounts for 2 self-contained breathing apparatus in the crew compartment Bodywork: • Manufacturer Magirus Eurofire • TLF 16/25 body according to DIN standards • Three large lateral equipment compartments each side • Extendable steps for the front side equipment compartments • Brackets for standard equipment load • Mounts for 2 additional breathing apparatus • Roof compartment Fire Pump / Water Tank: • Magirus FPN 1600-8 centrifugal fire pump • Capacity 1,600 l/min at 8 bar • Water tank 2,600 l Firefighting Equipment: • Fixed rapid action hose reel, 50 m, in upper compartment G6 Safety and Lighting: • 2 rotating beacons at the front and 1 at the rear • Pneumatic special signal system (Martin horn) • Rear-view camera • Hygiene board available on request We are happy to provide you with a specific offer and can present the vehicle to you in detail at our premises in Berlin. All information is provided to the best of our knowledge and belief, without guarantee of completeness or accuracy. This advertisement does not constitute an offer, but is for information purposes only. Subject to prior sale!

Condition: good (used), Year of construction: 2018, Installation for continuous monitoring of water quality. Completely assembled in a closed, air-conditioned monitoring room (portable). The system consists of 3 components: * LAR Biomonitor Bwjdpfx Ajzgcnbofgou * LAR QuickTNPO * LAR QuickTOCultra

Condition: good (used), Year of construction: 1996, functionality: fully functional, Automatic Sheet Feeder A-20-P (Pile Table, Mabeg Suction Head, Double Sheet Control, Suction Belt Table) Automatic Laminating Unit EK 102 (Waterbased & Thermal) Bsdpfxjzvwkvj Afgewu Seperating Unit: Seperating Roller Jogging Table (Delivery) Format: 1020 x 1140 mm Condition: Cleaned

Year of construction: 2010, operating hours: 1,480 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1873076, We are offering this very well-maintained Uhde high-pressure pump for waterjet, HPS 4022, year of manufacture 2010. Manufacturer: Uhde High-Pressure Pump for Waterjet Model: HPS 4022 Year of Manufacture: 2010 Condition: Very good Category ID: 34 Machine Type: Uhde HPS Waterjet High-Pressure Pump If you have any questions or require further information, please feel free to send us a message or give us a call. Bwsdpfx Ajygmhtsfgju

Condition: good (used), Pumpex water pump 300m3/h, 7.5kw Bwjdpfxjvgnvbs Afgju

Condition: like new (used), Year of construction: 2023, x-travel 4216,0 mm y-travel 2007,0 mm z-travel 305,0 mm control CNC table-size 4902,0 x 2134,0 mm max. workpiece weight 1465 kg / m² machine weight ab. 2500 kg total power requirement 30 kW dimensions of the machine ca. 5486,0 x 3708,0 mm The compact waterjet cutting system in bridge design consists of a torsion-resistant Bjdpeyclvnjfx Afgswu torsion-resistant steel construction, which is coated with a special durable anti-corrosion coating. coating. Both the two X-axes and the particularly high Y-axis are based on the Y-axis are based on the maintenance-free design specially developed by OMAX for the special requirements of a waterjet cutting system. specially developed by OMAX for the special requirements of a waterjet cutting system. Equipment: - Motorized Z-axis - Water level control - Abrasive system with AFS 1000 abrasive conveyor system - High-pressure system with special stainless steel high-pressure pipes - MAXIEM direct pump M4050 - OMAX Intelli-MAX PC control software for MAXIEM - OMAX PC control software Intelli-MAX Premium - Cutting head technology based on the A-Jet 5-axis angular cutting head - Height sensor for the A-Jet 5-axis angle cutting head - Laser pointer as a positioning aid - Automatic desludging system MBM ASAS-ME - Compressed air injection for the MBM ASAS-ME automatic desludging system - Clamping and fastening set for sheet material and material holders - Collecting grid in the cutting basin - Sensors for automatic monitoring of the cutting process - Water treatment through water conditioning incl. water analysis - Omni-Start drilling aid (Vacuum Assist) for brittle and laminated materials

Condition: like new (used), Falch Trail Jet 15, 06/2024, as new with warranty, 232 operating hours Bsdpfx Ajwz Scaefgjwu

Condition: ready for operation (used), Year of construction: 2020, A water jet cutting system Expert Systemtechnik with a high-pressure pump BFT is available. 1) Cutting system Expert Systemtechnik cutEXPERT variojet, year of manufacture: 2020, product: leather/foam materials/technical textiles/rubber materials/composite materials/packaging material, max. cutting speed: 70m/min, repeat accuracy: +/-0.2mm, water consumption: approx. 0.2l/min, cutting dimensions X/Y: 1800mm/3000mm. 2) High-pressure unit BFT Servotron 40.45+, year of manufacture: 2020, drive power: 45kW, max. flow rate: 4.6l/min, design pressure: 4200bar, max. operating pressure: 4000bar. Machine dimensions X/Y/Z: approx. 2000mm/1000mm/1400mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible. Bwedpfx Afsxmkcmsgou

Condition: like new (used), Year of construction: 2025, operating hours: 400 h, functionality: fully functional, pressure: 2,800 bar, overall weight: 3,000 kg, rotational speed (min.): 1,900 rpm, pump capacity: 30 l/min, Equipment: type plate available, HAMMELMANN AQUAJET 144 Bodjvgrpxspfx Afgowu GWARANCJA PRODUCENTA SILNIK DEUTZ TCD 6.1 ST5 140 KW DOSTĘPNY OD ZARAZ

Condition: like new (used), Year of construction: 2010, operating hours: 487 h, functionality: fully functional, overall weight: 1,100 kg, volume flow: 358 m³/h, power: 125 kW (169.95 HP), type of cooling: water, rotational speed (max.): 1,500 rpm, Diesel water pump set, Sprinkler unit with few operating hours, in excellent condition for sale. 358m3/h Manufacturer: SISU Type: 420DSJPL Year of manufacture: 1996/ 2010 Bsdpfx Asyi H Eqsfgswu new turbo freshly serviced Power: 120 kW, 2940 rpm Pump: KSB ETANORM MX125-250 year: 2010 Capacity: 358 m3/h delivery height: 86 meters Power: approx. 180 HP Weight: 1200 kg self-starting water cooling built on a mobile chassis Operating hours: approx. 473 hours If you need more information, we will help you! Please contact us using the form or call us by phone. Your ad has been automatically translated. Translation errors may occur.