Used Water Heater for sale (10,912)

Year of construction: 2008, condition: excellent (used), Electric heating element Shock- and impact-proof plug-in heating system with heating conductors embedded airtight in silicone.No wear, no corrosion, operational safety even in continuous operation and in case of impacts and shocks. Temperature adjustment via integrated controller with insulated control knob. Permanently connected industrial cable, no vulnerable plug connections. High-strength special aluminum profile for high load capacity and flat pressing surfaces on all sides. Gold anodized finish as standard, scratch and abrasion resistant, easy to clean. Size:Type: EST 21 Length: 2100 mm Connected load: 1100 Watt, 230 Volt Temperature: 0 / 40 / 70 / 100 / 170 / 200 degrees Location: ex stock 54634 Bitburg - immediately available - Kfjdpfx Afelcd Szofea

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 70 bar, total height: 1,600 mm, total width: 800 mm, total length: 1,200 mm, temperature: 40 °C, operating pressure: 70 bar, noise level: 80 dB, Equipment: documentation/manual, rotational speed infinitely variable, RO 510-DT2-15S – Compact Seawater Reverse Osmosis System, approx. 15,000 L/day Potable Water Compact, fully automated reverse osmosis system for the production of hygienic drinking and process water from natural seawater. Ideal for maritime applications, island supply, hotels, as well as small-scale industrial and utility operations. Technical Specifications Type: RO 510-DT2-15S Process: Reverse osmosis with Disc-Tube (DT) technology Permeate Output: Approx. 15,000 L/day (15 m³/day, depending on operating conditions) Feed Water: Seawater with high conductivity, approx. 55,000 µS/cm (high salinity) Permeate Quality: Drinking water, approx. 500 mg/L residual minerals (reference value) Kfsdpfxsw Uf Iho Affoa Recovery Rate: Approx. 30% (typical operating range) at 55,000 µS/cm conductivity Design Temperature: Approx. 25°C (Operating range: approx. −2 to 35°C) Process Technology & Configuration DT module with open feed channel – highly fouling-tolerant and fully cleanable Mechanical pre-filtration (high-performance filter + 10 µm cartridge filter) Chemical pre-treatment of feed water (acid dosing) generally not required Integrated rinsing and CIP (clean-in-place) function, PLC controlled Skid-mounted on stainless steel frame (AISI 316) High-pressure lines in stainless steel, low-pressure section in seawater-resistant plastic Pumped seawater components made from corrosion-resistant materials Operating & Energy Data Feed Water Flow: Approx. 1,000 L/h (reference value) RO Module Operating Pressure: High pressure range, designed for seawater desalination Power supply: 230 V, 50 Hz, single phase Connected load: Approx. 6 kW Control, Monitoring & Safety Local operator panel with integrated PLC control Monitoring of pressures, flows, conductivity, and operating hours Automatic shutdown in case of: - Insufficient feed pressure - Exceeding permissible operating pressure - Overpressure in permeate/concentrate lines - Exceeding defined conductivity limits (with automatic redirection to drain) Automatic “Stop & Rinse” function: Permeate flushes all seawater-contacted components on shutdown, reducing fouling during system standby Dimensions & Weight (Skid) L × W × H: Approx. 1,190 × 705 × 1,500 mm Weight: Approx. 530 kg (dry), approx. 605 kg (operating) Typical Applications Vessels, offshore platforms, ports Island and coastal supply Hotels, resorts, small industrial and utility operations Backup or peak load system for existing potable water production Additional technical documentation, photos, and information on scope of supply, pricing, and availability are available on request.

Condition: good (used), mileage: 488,397 km, power: 184 kW (250.17 HP), first registration: 05/2019, fuel type: diesel, tire size: 285/70R19,5, axle configuration: 4x2, wheelbase: 4,700 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 9,050 mm, total width: 2,600 mm, total height: 3,770 mm, loading space length: 6,270 mm, loading space width: 2,500 mm, loading space height: 2,510 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking air conditioner, parking heater, power mirror, tail-lift, traction control, trailer coupling, - Second diesel tank - Digital tachograph - Tachograph (control device) - Fixed - High roof - Tail lift - Central lubrication system Number of axles: 2, configuration: 4x2, unladen weight: 8,710 kg, gross weight: 11,990 kg, total tank capacity: 430 liters, second diesel tank, trailer coupling, king pin diameter: 40 DIN, fifth wheel: fixed, number of differential locks: 1, central lubrication system, suspension type: full air suspension, cab type: high roof, cruise control, tachograph (control device), digital tachograph, air conditioning, stationary air conditioning, auxiliary heater, electric windows, electric mirrors, radio/cassette, GPS navigation, color: white, heated mirrors, reversing camera, lighting type: halogen lamp, lane departure warning, climate control, seat heating, Bluetooth, blind spot sensor, engine power: 184 kW (247 hp), fuel: diesel, Euro: 6, transmission type: AS-Tronic, transmission manufacturer: ZF, gears: 12, power steering, ABS, ASR, starter battery, central locking, seating configuration: 1+1, seat cover material: fabric, seat adjustment: manual, auxiliary heater manufacturer: Webasto, model: Heating, heater type: diesel, operating hours / diesel: 663, wall thickness: 30 mm, tail lift, tail lift design: rear flap, tail lift capacity: 2,000 kg, tail lift manufacturer: B.A.R. Cargolift, tail lift material: aluminum, tail lift dimensions: 254 x 256, battery for ramp, WÜLLHORST ISOLATED BOX WITH HEATER, 260 CM WIDE, 2 TONS TAILLIFT Transmission Transmission: ZF, 12-speed, automatic Axle configuration Tire size: 285/70R19.5 Brakes: disc brakes Suspension: air suspension Axle 1: steered; left tire tread: 11 mm; right tire tread: 9 mm Axle 2: twin tires; left inner tread: 11 mm; left outer tread: 11 mm; right inner tread: 11 mm; right outer tread: 10 mm Weights Unladen weight: 8,710 kg Payload: 3,280 kg Gross vehicle weight: 11,990 kg Functionality Tail lift: B.A.R. Cargolift, rear flap, 2,000 kg Loading platform height: 111 cm Refrigeration unit: diesel (663 operating hours) Wall thickness: 30 mm Maintenance APK (Dutch MOT roadworthiness inspection): certified until 04/2026 Condition Technical condition: good Visual condition: good Kodpfx Afexp Envsfofa Damages: none Number of keys: 3 Financial information Lease price: €606 per month (default, 60 months); please inquire for additional information and terms Identification License plate: KLEYN1 Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a continuously changing stock of 1,200 used trucks, tractors, and trailers. Our inventory includes all European brands, years, and price categories. Why buy from Kleyn Trucks? Simple! • Large, fast-changing selection • Recognizable quality • Great pricing • Proper business practices • Multilingual support • We understand our customers • Assistance with import and transport • (Export) license plates handled swiftly • Expert technical services • The security of “recognizable quality” • And more.... Please visit our website for special offers and the complete stock:

Condition: like new (used), Year of construction: 2025, operating hours: 250 h, functionality: fully functional, pressure: 2,800 bar, overall weight: 3,000 kg, rotational speed (min.): 1,900 rpm, pump capacity: 30 l/min, Equipment: type plate available, HAMMELMANN AQUAJET 144 Year: 09/2025 2800 BAR Manufacturer's warranty Kjdpfx Afovgrpxjfefa Engine: DEUTZ TCD 6.1 ST5, 140 kW Available immediately

Condition: new, Year of construction: 2025, We produce and install complete plants for water and juice , still or carbonated. Kfsdpfou Nad Tjx Affea The complete line consists of : bottle blowing machine, automated feeding PET , compact washing , filling and capping machine. Each capping machine has automated cap feeder and sterilization station for caps. We provide high productivity filters and CIP automated hygienisation station. As option we can add the carbonated station completed with chiller and heat exchange unit. After bottles are filled we install X ray machine for inspection, oven for increasing liquid temperature, water blowing machine to clean the bottles, labeling machine, date and lot machine, bottle case packing machine, palletising unit, stretch film machine to hold pallets.

Condition: excellent (used), Weiss Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet This equipment tests the ingress of water into housings. In conjunction with a timer, the test cycle can be automated for an adjustable test duration from 3 seconds up to 30 hours. According to DIN VDE 0470 T1 and EN 60529 for testing protection ratings IPX3 and IPX4. Thanks to the integrated recirculation system, water consumption can be minimized. Features: - Glass door with wiper - Pneumatic drive for the oscillating tube - Adjustable oscillation angle - Interchangeable oscillating tubes - Swivel and exchangeable nozzle holders - Adjustable and monitored water flow rate - Test duration control Mechanical Load Data: - Max. load with test object (evenly distributed over area) - Permissible test load weight for carrying rack (total): 25 kg - Spray radius: 200 mm / 400 mm Test Data for IP Protection Ratings: - Oscillation speed: approx. 60°/s - Oscillation angle for IPX3: approx. ±60° - Oscillation angle for IPX4: approx. ±180° to -10° Kfsdpfexxuytex Affoa Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating Data: - Voltage: 3/N/PE AC 400V ±10% 50 Hz - Rated power: 1.5 kW - Rated current: 5.0 A - Weight: 375 kg Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) (Specifications subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Condition: used, Year of construction: 2006, COMPLETE BOTTLING LINE KRONES 30,000 bph Product: still water Speed: 30,000 bph – 1.5 L PET Preform tipper - 2018 Model: m.tanner ag/prologic Caps elevator Gassner - 2006 Manufacturer: Gassner Preform aligner (part of the blow molding machine) - 2006 Monobloc with blow moulder, filler and capper Blow molding machine - 2006 Brand: Krones Model: Krones Contiform S20 Type: Rotary Number of molds: 20 Filler - 2006 Brand: Krones Model: Krones Volumetic Direction: Counterclockwise Number of filling valves: 84 Type of filling system: gravity flowmeter Capper (part of the monobloc) - 2006 Brand: Krones Number of heads: 18 Type of cap: Alaska 3 Principles Distribution system: pick & place Nitrogen dispenser - 2006 Model: Cryotech International Inspector for level control and cap - 2006 Model: Krones Checkmat Bottle transport - 2006 Model: Krones Synco Dryer tunnel - 2006 Brand: Europool Model: TF-04 Labeller - 2006 Brand: Krones Model: Krones Etima Type of labeller: Rotary Direction of rotation: Counterclockwise Kedpfx Asvwcdzjffofa Type of labeling: Rollfed Number of stations: 1 Number of heads: 18 Type of applicable labels: OPP Plate handling: lobe cam Head adjustment: electric American input and 2 parallel outputs Label presence check on output tape Marker - 2015 Model: Markem Smart Lase C350 Shrink wrapper - 2006 Brand: OCME Model: Vega N70/2 Film launching Dual Input Handle applicator - 2006 Brand: Comag Model: Decimo HM 100/2 Equipped for bundles: 3x2 Dual Input Bundle transport: Brand: Europool Palletizer - 2006 Brand: OCME Model: Pegasus M400 Type: Layered Pallet warehouse Interlayer system Maximum workable height: 225 cm - pallet Workable pallet size: 80 cm x 120 cm Pallet wrapper - 2006 Brand: Bema Model: Silkworm Turbo Maximum workable height: 225 cm - pallet Wrapping type: rotary table Top sheet spreader Pre-stretch Pallet labeller - 2020 Brand: Eidos Model: 7P6ERLP

Condition: good (used), Year of construction: 2015, passenger car, car, automobile Kedewh Rz Ujpfx Affofa -Transmission: Automatic transmission -Special feature: 3 foot pedals - Layout: left accelerator pedal, center brake pedal, right accelerator pedal, electronically switchable -Explanation: enables acceleration with the left leg if the function of the right leg is limited -Power: 100 kW / 136 hp -Fuel type: Diesel -Color: black -Transmission: DCT automatic transmission -Engine displacement: 2143 cc -First registration 13.04.2016 -Number of holders: 3 -Mileage: 154,729 km -HU/AU valid until: June 2025 -Tires: Winter and summer tires on alloy rims -Equipment list: see pictures (with codes) Auxiliary heater, blind spot monitoring, parking assist, Garmin MAP PILOT, off-road package, cruise control, suspension for increased ground clearance, air conditioning, automatic high beams, heated seats, automatic tailgate, remote control for auxiliary heater...

Condition: used, Year of construction: 2004, Additional title: water deaeration Capacity: 50 hl/h O2-contents after deaeration: 0,5 ppm Temperature: 16 °C Pressure: 4 bar Power: 1,0 kW Voltage: 380 V Frequency: 50 Hz Operation / Control: Fully automatic / Steuerung S7 Kedpsxw R Rxofx Affefa Material: Frame: 1.4301, pipes: 1.4404 Features: Water line (pneumatic flap valves, flow meter, check valve, sampling valve), membrane module (water inlet from below), CO2-line (flap valve, pressure reduction valve, flow meter, manual regulation valve) Vaccum line (Flap valve, vacuum pump (ELMO), manual regulation valve), plate heat exchanger (Thermowave), pressure boosting pump (Hilge, 4,5 bar with 250 hl/h, 7,5 kW motor)

Condition: used, This listing is for a Aurora scentific water bath Kjdpfx Aexzh Hxeffjfa

Condition: new, Year of construction: 2025, The device is designed to cool tubes in CO2 laser plotters thanks to the use of a cooling unit. The CW5200 chiller keeps the water temperature at the right level. Thanks to such cooling, the tube has stable operating parameters. The CO2 chiller ensures optimal working conditions of the tube, effectively protecting it against overheating and damage. The device is intended for people / companies where a laser plotter is an everyday work tool. Technical Specifications: Power supply - 230 [V] Current consumption - 0.25 ~ 3.1 [A] Compressor power - 0.59 [kW] Cooling capacity - 1.7 kW / 5783 Btu / h / 1457Kcal / h Coolant amount - 360 g Tank capacity - 6 [L] Connections (input / output) - 10 [mm] Working height - 12 [m] Flow - 13 [L / min] Weight - 26 [kg] Dimensions (L x W x H) - 58 x 29 x 47 [cm] Security: - Compressor overvoltage protection - Alarm for incorrect water flow in the system Ksdpeg Nkvrsfx Affsfa - Over temperature alarm The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: used, Year of construction: 2013, operating hours: 1,500 h, functionality: fully functional, Water heated hyrayulic Press Kjdpjwiuxmefx Affefa 9 storey (cutom made) Stainless Steel Plates 3,50m x 2,30m/each

Condition: excellent (used), Weiss Type: SWT 200/400 Weiss spray and splash water test cabinet The penetration of water into the housing is tested. In conjunction with a timer, the test cycle can be automated with an adjustable test time of 3 seconds to 30 hours. According to DIN VDE 0470 T1 or EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation device means that water consumption can be reduced to a minimum. Features Glass door with wiper Pneumatic drive of the swivel tube Adjustable swivel angle Replaceable swivel tubes Nozzle holder swivels and can be replaced Adjustable water volume flow and measurement Control of the test duration Kedpevzz A Rsfx Affjfa Data for mechanical stress Max. load with test material (evenly distributed over the surface) Permissible test material weight for test material carrier (total) 25 kg Spray radius 200 mm / 400 mm Data for IP protection class tests Swivel speed approx. 60°/s Swivel angle IPX3 approx. ± 60° Swivel angle IPX4 approx. ± 180° -10° Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm Data for operation Voltage: 3/N/PE AC 400V ±10% 50hz Rated power 1.5 KW Rated current 6.0 A Weight: 375 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: like new (used), Year of construction: 2022, operating hours: 2,600 h, functionality: fully functional, repeat accuracy: 0.02 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 200 mm, operating pressure: 4,000 bar, Waterjet cutting system by Perndorfer, year 2022, with approx. 2,600 operating hours for sale. Travel: 3050 mm x 1550 mm. 2 cutting heads with dynamic angle correction. Cutting tank made entirely of stainless steel. Includes auger for slurry removal. Includes high-performance drilling unit with 18,000 rpm. Laser pointer; water level regulation. Includes device for cleaning water surface/support during plastic cutting. High-pressure pump 'Servo-Jet-4000' max. 4000 bar at 8.5 liters/min. Includes 3 Lantek Expert Cut licenses incl. postprocessor. Kodpfx Afexy Symefsfa

Condition: used, Year of construction: 2019, Insulated, upright stainless steel tank with heating jacket (+temperature control) and pressure booster pump (3 m³/h at 3 bar). The tank is also equipped with a drain pipe, level indicator and pressure gauge. Additional title: vertical, insulated, heatable stainless steel tank Gross volume: 2000 l Height: 2100 mm Material: Stainless steel 1.4404 (AISI 316 L) with insulating cladding made of 1.4301 (AISI 304) Base construction: standing on 4 feet Features: Insulation (insulation thickness 50 mm); heating jacket; temperature control; pressure booster pump (Grundfos); outlet pipe; hose level indicator; pressure gauge Ksdpjxwy Aqjfx Affefa

Condition: used, This listing is for a Nickel Electro Water bath Kjdexzh Hrepfx Affsfa

Condition: excellent (used), Here we offer a Millipore Elix 3 water purification system. Kfedpfoq Ebi Njx Affea Purifies 3 liters of water per hour Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, This listing is for 1 of 3 Millipore Rios-DI UV Water Puerification System RiOs-DI® 3 UV Water Systems with built-in 254 nm bactericidal UV lamp easily and economically produce up to 15 L/day of consistent-quality Type 2 pure water from tap water. A combination of reverse osmosis (RO) technology and deionization (DI) resins delivers water with high resistivity ( > 10 MΩ·cm) and low TOC (< 30 ppb) whose quality surpasses that of service DI or distilled water UV lamp helps ensure optimal water quality for bacteria-sensitive applications Pure water flow rate of >2.4 L/hr Integrated 6-L storage reservoir Avoid the drawbacks of other purification methods such high lab space demands for resin bottles or distillation equipment; heavy maintenance; lack of quality monitoring; and in the case of distillation, high energy and water use Kfjdpfx Aexzhcmoffja

Condition: like new (used), Rittal Type: SK 3336.509 Technical details: Voltage 3/400V 50 Hz Max. current 6.7 A Starting current 30.4 A Nominal cooling capacity 5040 W Max. power consumption 3340 W Refrigerant R134a 2.2 kg Temperature range +15 / +43 C° Kfjdsuy N Nmopfx Affea 150 kg Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, This listing is for a Techne Dri-Block heater with sample concentrator Ksdpfx Asxzg Syjffsfa

Year of construction: 2018, condition: excellent (used), EFD Type: MINAC 6/10 SM Heat treatment The compact design of the Minac induction heating system allows for easy installation and offers fast, concentrated and controlled heating with full repeatability. repeatability. Kfjdpfx Afet Din Aofea Medium frequency product line Technical data: Maximum output power 10 kW Continuous output power 6 kW Mains voltage 400-480 V Frequency range 10-25 kHz Control range of output power 2-100% Recommended back-up fuse 16 A Cooling water approx. 4 l/min Cooling water flow temperature min./max. 18 - 35°C Cooling water pressure min./max. 4 - 6 bar Weight approx. 50 kg Dimensions (WxDxH): 345 x 708 x 453 mm Year of construction: 2018 optris CTlaser infrared thermometer Abbreviation: 3ML Measuring range: 50 to 400 °C Spectral sensitivity: 2.3µm Typical application: Metals at low object temperatures (from 50°C) Temperature control ECU 1214C Hyfra eChilly water cooler 4-S Cooling capacity 4395W The device comes from the laboratory sector. Only a few operating hours. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, This listing is for a Clifton Unstirred Water Bath Kfsdpfx Afsxzguzjfoa

Condition: good (used), Köhler Type: HKS 1500 The Köhler HKS 1500 salt spray chamber is an industrial testing device designed for corrosion testing according to international standards such as ISO 9227 (NSS, AASS, CASS). It is primarily used in the automotive and metalworking industries to test the resistance of materials and coatings to corrosive environments. Technical Features Model: Köhler HKS 1500 Test Volume: Approx. 1000 liters Chamber Type: Front- or Top-Loading Control: Touch panel for easy operation Temperature Range: Room temperature to approx. 50 °C Materials: Corrosion-resistant interior lining, e.g. B. Polypropylene Standards: DIN EN ISO 9227, VDA 233-102, DIN EN ISO 11997-3 This chamber enables both conventional salt spray tests and cyclic corrosion tests and can be individually adapted to specific testing requirements. Technical specifications for the salt spray cabinet: Test chamber material: Polypropylene RT - + 55°C Test chamber temperature range/salt spraying Heating/salt spraying indirectly via chamber walls Temperature range - condensate RT - + 50°C Temperature range - humidifier RT - + 75°C Heating indirectly via the test chamber walls. Temperature stability +/- 1.0 K Digital temperature control, resolution 0.1 °C (on plain text display) Digital control, heating circuit via electronic relay without power disturbances Saline supply: approx. 200 hours of continuous spraying or external Saline supply: automatic humidifier filling Fog generation: dual-fluid nozzle made of acrylic glass Air flow rate: 3.0 m³/h Precipitation rate controlled by electronic dosing pump Kedpfswit Ersx Affofa Dimensions: Inside: Width 1030 mm, Depth 880 mm, Height 1100 mm Outside: Width 1200 mm, Depth 1000 mm, Height 2080 mm Electrical connection: Nominal voltage: 400V 3P/N 50Hz Pmax: 9800W Connected load: 3.0 KVA (salt spraying) (condensation) 2.0 KVA Compressed air connection Min. 4.5 bar, max. 8.0 bar Water connection (deionized water): Min. 2.0 bar, max. 6.0 bar Disposal: Mist outlet NW 32, Condensate outlet NW 32 Weight: 450 kg Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet Used to test water ingress into enclosures. In combination with a timer, the test cycle can be automated with an adjustable test duration from 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 and EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated recirculation system reduces water consumption to a minimum. Kodpexg Hrkefx Affefa Features - Glass door with wiper - Pneumatic drive for the oscillating pipe - Adjustable oscillation angle - Interchangeable oscillating pipes - Swivel and interchangeable nozzle holders - Adjustable and measurable water flow rate - Test duration control Data for mechanical load: - Max. load with test specimens (evenly distributed): Permissible total weight for specimen carrier: 25 kg - Spray radius: 200 mm / 400 mm Data for IP protection class tests - Oscillation speed approx. 60°/s - Oscillation angle IPX3 approx. ±60° - Oscillation angle IPX4 approx. ±180° -10° Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External dimensions (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating data: - Voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 1.5 kW - Rated current: 6.0 A - Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) Further questions can be answered by phone.

Condition: excellent (used), Year of construction: 2022, ICS Cool Energy Type: IC 305 Year of manufacture: 2022 ICS Cool Energy i-Chiller IC 305 – Industrial Water Chiller 8 kW For sale is a compact industrial water chiller (process chiller) of the type i-Chiller IC 305 by ICS Cool Energy. This unit is ideally suited for cooling machinery, processes, or laboratory applications. Features / Equipment: - Integrated hydraulic system (including pump, expansion tank, etc.) - Robust “coil-in-tank” evaporator system for high operational reliability Ksdpfxjw S Txio Affjfa - Compact, space-saving design - Plug-and-play installation – immediately ready for use - Suitable for a wide range of applications: plastics processing, food industry, breweries, recycling, laboratories, and more. Technical details - Cooling capacity: 8 kW (nominal output) - Power consumption: 3.64 kW - Energy efficiency (EER): 2.85 - Power supply: 400 V ± 10 %, 3-phase + PE, 50 Hz - Max. ambient temperature: 46 °C - Compressor(s): 1 unit - Refrigerant: R410A - Tank volume: 115 l - Dimensions (L×W×H): 660 × 1315 × 1420 mm - Noise level: 81 dB(A) sound power, 53 dB(A) sound pressure - Weight (operating weight): approx. 220 kg Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change or error!) For any further questions, please contact us by phone.