Deionized water system / Water treatment

SUEZ Water Technologies & Solutions MK-3

Condition: new, Year of construction: 2025, Manual operation with our ultrasonic cleaning technology, analog control panel, and temperature control via a digital thermostat. Functions from the PRO series can be added as optional features. We offer volumes from 60 to 7,500 liters to meet all requirements. Tank capacity: 110L External dimensions: 1970x670x970mm Usable dimensions of the tank: 550x350x250mm Ultrasonic frequency: 40kHz Tsdsf Hqavjpfx Apdjd Ultrasonic power: 1000W

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, temperature: 35 °C, operating pressure: 75 bar, energy consumption: 64 kWh, Industrial plant for the treatment and concentration of process water as well as for nutrient recovery. The plant combines a double-pass reverse osmosis (RO) system with a thermal evaporator unit and was originally developed for biogas production to recover ammonium-containing fertilizer from process water and digestate. The plant was never commissioned due to the operator's insolvency and is in a preserved condition. The system is suitable for operators from the industrial, environmental technology, or agricultural sectors who are looking for a rapidly available solution for water treatment, ZLD (Zero Liquid Discharge), or nutrient recovery. Technical data System type: RO Double Pass + Evaporator Model: SIMPEC RO Double Pass 8000 44 8 Evaporator 57 000 Year of construction: 2020 Permeate output: Stage 1: 7.5 m³/h Stage 2: 6.7 m³/h Tsdpfx Aoyr H Anjpdsd Permeate quality:

Condition: used, Year of construction: 2007, Used Golfetto Sangatie Stone Catcher Multiple units available Drive 2x 3kW Used for destoning wheat Measurements in attached file Gravity Selector Dryostoner Todpfoxft Ddsx Apdjd

Year of construction: 1999, condition: excellent (used), 600 KG 10 BAR Tedpfx Apoxy Ikbjdsd

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings materials In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system Todpfxofzk Ewo Apdsd The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables.

Year of construction: 2021, condition: ready for operation (used), Robot travel path: 5000mm, arm length: 2500mm, lift: 1000mm, spin radius: 2200mm, L-manipulator load capacity: 2000kg, lift velocity: 0,85m/min, swing speed: 1,7/min, turn speed: 6/min. Roboter type: IGM RTE 497-S in hanging position, control: full digital PC-Robotcontrol, Type RCE, software: WIN 10 & Linux based System + igm Robotsoftware K6, welding process: 135 (GMAW), single-wire, Ø1,2mm, welding power source: digital Invert Welding Power Source TPS 500i (500A at 40% duty cycle), robot periphery: rotating boom for floor installation with 2,5m boom length, number of working stations: 1, working station: 3-axis L-Manipulator with lifting device with 2t nominal load capacity, security Technology: Pistol-Security-Shut-down in wrist axis, emergency Stop on Handtablet, on Manipulators and Control Panel, three-coloured warning light for the operating Status partition, security Door. machine is complete, no defects known, documentation complete, was maintained regularly. An on-site inspection is possible. Tedpfx Ajwc A Rdopdod

Condition: used, Year of construction: 2016, Water treatment plant with semi-permeable membrane modules for desalinating pre-treated water. Reverse osmosis takes place via a two-stage process consisting of two pressure pipes, each with two membrane modules. The plant consists of: - Two pressure pipes, each with two membrane modules - Permeate blending and concentrate recirculation - Upstream fine filtration - Various sampling taps - Various measuring instruments for pressure, flow, temperature, conductivity and pH value - Flushing station with flushing tank and flushing pump - Chemical dosing stations for antiscalant and NaOH - High-pressure pump - Various automatic fittings - Control cabinet with touch display Additional title: Reverse osmosis for desalination of raw water Flow rate: 6000 l/h depending on the blending quantity Max. operating overpressure: 14 bar Recovery appr.: 82 % Water: 5-7 m3/h; 1-10 bar Operation / Control: Switch cabinet with touch display Tedpfx Aoyxnffepdjd Features: 2 pressure pipes, each with 2 membrane modules; sampling taps; fine filters; flushing stations; chemical dosing stations; high-pressure pump; automatic fittings; measurements of pressure, flow, conductivity, temperature and pH value;

Condition: ready for operation (used), Year of construction: 2007, A Haver & Boecker bagging machine is available as a test machine for filling various powdery bulk materials including an MEC 3 weighing electronics. Weighing range: 10kg-50kg, adjustment increment: 50g, bag filling weight: 25kg, bagging capacity at 25kg: approx. 180/h, max. product moisture: 0%, product filling temperature: 20°C, bag material: 2-layer paper/PE with filter fleece. Documentation vorhanden. An on-site inspection is possible. Tedpfxjx U Dv Se Apdod

Condition: excellent (used), Year of construction: 2020, Traverses X Y Z: 500 x 450 x 400mm, Table size 500 x 630mm, C axis 360, B Axis -5 / +110°, maximum workpiece diameter 630mm, maximum workpiece height 550mm table load 200kgs, Spindle taper BT40, 19kW Spindle Motor, Spindle Speed 12,000rpm, Heidenhain Control, Tjdjz R Nv Hjpfx Apded 30 Station ATC, spindle probe, Swarf conveyor, through spindle coolant

Year of construction: 2021, condition: used, Engine: 4-cylinder turbo diesel engine, engine power: 140kW (190hp), drill mast: XL series, pullback force: 150kN, undercarriage: crawler undercarriage with 450mm wide rubber tracks, drilling drive: dual-head drilling gearbox. No known damage. Documentation available. Inspection possible by arrangement. Todpfx Apjz R A Insdjd