Used Vibro Table for sale (37,559)

Condition: excellent (used), Panel Beam Saw - With rear lifting table Numerical Control POWER CONTROL Software CADmatic 4 Professional Lifting scissor table (mm) 3800 x 2200 Rear pushers (N.) 1 With clamps / grippers 7 Iisdpfxsh Imvho Affjk Turning device (rotating unit) at 90° Max. cutting width (mm) 3800 Useful stroke of the pushing system (mm) 3800 Max blade projection (mm) 95 Scoring Unit (max saw diameter / power) mm 180 / Kw 2,2 Main Sawing Unit (max saw diameter / power) mm 380 / Kw 13,5 Adjustable speed of the saw carriage (m/min) 1 - 130 Front supporting tables with Air blowing system (N.) 3 (2160mm x 650mm) Total power (Kw) 28 (ca.)

Condition: used, Deckel transfer table swivel table No. 2231 For Deckel milling machine FP 3 Iiedpfx Afevu R Nmjfok

Condition: as good as new (ex-display), Demonstration machine Iedpfox H Ukdex Affoik 2-chain feed table with 2 hydraulic feed rollers

Condition: excellent (used), Year of construction: 2024, operating hours: 279 h, functionality: fully functional, cutting length (max.): 3,200 mm, Well-maintained Format 4 Kappa 550 panel saw, acquired in 2024 as a refurbished demonstration unit. The machine’s actual year of manufacture is 2017. Equipped with a high-quality feature set. Iiodpfjx H Tydsx Affsk The main saw unit has only 279 operating hours (the scoring unit 22 h). Power: 10 kW Sliding table with X-Roll technology: 3,200 mm Electronically controlled height and tilt adjustment 0°–46° Saw blade diameter 250–550 mm, max. cutting height 202 mm Overhead guard, hood for 90° and hood for angled cuts E-motion control 15” color touchscreen display Electronically positioned rip fence with digital readout, cutting width 1250 mm Tools and replacement saw blades (main and scorer) included. #8455

Condition: used, Year of construction: 1994, Saw unit: tiltable 45° Carriage length: 3200 mm Max. saw blade diameter: 400 mm Max. saw blade projection at 90°: 125 mm Max. saw blade projection at 45°: 88 mm Saw blade bore: 30 mm Motor power: 5.5 kW Max. cutting width: 1300 mm Control panel: at eye level Iiodpjx H Tmdefx Affek Control panel design: with buttons and LCD screen Height adjustment: electric motor Tilt adjustment: electric motor Tilt angle display: on screen Cutting width adjustment: motorized Cutting width display: on screen Sliding table guide: Pertinax Table extension length: 840 mm Crosscut at cross fence: 3800 mm Cross fence display: scale Cross fence design: fixed 90° Speeds: 3/4/5/6000 rpm Scoring unit: yes Scoring unit adjustment: motorized and manual Scoring blade: two-piece saw blade PSV safety guard: yes End position lock: yes Automatic motor brake: yes Weight approx.: 1150 kg Extraction diameter: 120/80 mm Storage location:

Condition: good (used), Year of construction: 1970, functionality: fully functional, Rotary Table Surface Grinding Machine Sweeping Type RS 6B Stock No: 14-10-008 Machine data: Year of construction: approx. 1988 L x W x H: approx. 2700 x 2000 x 2200 mm Weight: approx. 3500 kg Specifications: Grinding range: Diameter: approx. Ø 600 mm Grinding height: approx. 300 mm Magnetic clamping surface: approx. Ø 600 mm Drive power: approx. 15 kW Iedpovtz Uksfx Affjik Grinding spindle speed: approx. 1500 rpm Grinding wheels - diameter: approx. Ø 350 mm Accessories: - Segment grinding wheel Price on request

Condition: excellent (used), Horizontal Panel Beam Saw - With rear lifting table Numerical Control MCS Evolution Software Rear Lifting table No. 1 Rear pushers Twin Pusher No. 9 clamps Iiedpfx Afop R Sdhofek Max. cutting width (mm) 3300 Useful stroke of the pushing system (mm) 3300 Max blade projection (mm) 105 Max clamps opening (mm) 105 Scoring Unit (max saw diameter / power) 200 mm Main Sawing Unit (max saw diameter / power) 360 mm - Kw 18 Adjustable speed of the saw carriage (m/min) 5 - 120 Front supporting tables with Air blowing system (N.) 3 Total power (Kw) 21 (ca.)

Year of construction: 2000, condition: used, Rotating lifting table Year of manufacture: 2000 Table size: 1300 x 800 mm Moves on 2 levels Upper level tiltable Load capacity: 500 kg Iedpfx Ajwkbaasffjik Connection: 400 V Availability: short-term Storage location: Röllbach

Condition: new, The new Holzprofi Maker scissor lift table supports ergonomic processing and handling of workpieces. Its versatile functionality increases long-term productivity and optimizes workflows in your workshop. It features a heavy-duty and sturdy construction. Advantages and Features: - The work table is characterized by high stability and easy mobility. - Robust construction yet mobile thanks to maneuverable casters. - The robust casters and the extremely durable worktop ensure stability, maneuverability, and a comfortable working height. - Versatile, storage aid, stacking trolley, and additional work table in one - MDF perforated panel with 20 mm holes and 80 x 80 mm grid as standard Technical specifications: Table dimensions 1200 x 800 mm Frame dimensions 1000 x 620 mm Height adjustment 430 - 1050 mm Weight 75 kg Iisdpfjx H Uf Uex Affek Max. load 350 kg Table top: 18 mm MDF Hole 20 mm Hole grid 80 x 80 mm

Condition: new, Year of construction: 2010, Center of spindle to wall or column 235 mm Column diameter 60 mm Size of table plate 290 x 290 mm Isdpew Spc Rjfx Affoik Motor output 1 kW Speed 50 - 4000 U/min. weight of the machine ca. 72 kg

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 0-341-07-7407, cutting length (max.): 3,100 mm, cutting height (max.): 72 mm, saw blade diameter: 350 mm, total length: 6,144 mm, total width: 5,375 mm, HOLZMA HPP 250/32/32 For sale: HOLZMA panel saw. Optionally available with a vacuum plate lifter as shown in the last two photos. Key technical data: - Year of manufacture: 2007 - Max. cutting length: 3100 mm - Main saw motor power: 7.5 kW - Saw blade projection: 72 mm - Scorer motor power: 1.1 kW Ijdpfox H Nvhex Affsik - Saw carriage feed: 5–100 m/min - Carriage drive: rack and pinion system - Software: CADmatic 3.0 Dimensions: - Body width: 5,375 mm - Rear table width: 3,588 mm - Total machine length: 6,144 mm Technical condition: The machine was in continuous production use. Regularly maintained, complete, and ready for further operation. Currently dismantled and prepared for transport. Videos of the machine in operation can be provided upon request.

Condition: used, Marking plate, straightening plate, spotting plate, cast plate 3000x2000 Working height 900 Weight approx. 7.5 tons Loading by crane possible Iiodov Np Eispfx Affjk

Condition: excellent (used), Horizontal Panel Beam Saw - With rear lifting table Numerical Control MCS Evolution Software Outside Rollers table for pre-loading (mm 4500 x 2200 ca.) Lifting table (mm) 4300 x 2200 Turning device (rotating unit) at 90° No. 2 Rear pushers (one with clamps / grippers) Twin Pusher No. 10 clamps / grippers Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) 4300 Max blade projection (mm) 135 Max clamps opening (mm) 133 Iiodjq Rfahspfx Affjk Scoring Unit (max saw diameter / power) 200 mm Main Sawing Unit (max saw diameter / power) 460 mm - Kw 27 Adjustable speed of the saw carriage (m/min) 0 - 150 Front supporting tables with Air blowing system (N.) 4 Total power (Kw) 36 (ca.)

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 Iisdpfx Aswugczoffok Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: used, Year of construction: 2001, sliding table length: 3000 mm cutting width at the fence: 1300 mm cutting width at the cross cut: 3200 mm cutting depth: 145 mm scoring unit: Ja height adjustment sawblade: elektrisch tilting adjustment sawblade: elektrisch Iijdpsx Edlxjfx Affjk adjustment fence: elektrisch adjustment crosscut fence: manuell read out tilting: Digitalanzeige read out sawblade height: Digitalanzeige read out crosscut: digital Anzeige Ablänglineal: Scala sawblade diameter: 450mm speeds: 4 motorpower: 5,5kW suction connection: 80 und 120mm machine length: 3600mm machine width: 2200mm weight: 1200 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 570x870x1710 mm Weight 143 kg Total power requirement 1,1 kw Iisdpsv A Hhbjfx Affjk

Year of construction: 1991, condition: good (used), Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, table saw, circular saw, panel saw -Manufacturer: Altendorf, sliding table saw type TKR 45 -Main motor: Bauknecht 5.5 kW with brake -Scorer motor: Emod 0.75 kW Iedpfxsmydmbe Affoik -Speed: 3000/4000/5000 rpm -Saw blade: Ø 300 mm / max. Ø 350 mm -Max. Cutting height: 90° 95 mm / 45° 70 mm -Miter cut: up to 45° -Cutting width: 2250 mm -Table length: 1400 mm -Dimension total 3480/1530/H1370mm -Weight: 1104 kg

Condition: ready for operation (used), Innotech ZGW F25 final assembly workstation, assembly station, workstation, workbench Hermes A4L label printer UV light Magnifier lamp PC, monitor, keyboard You are welcome to visit for an inspection. We are happy to organise affordable shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided that a valid VAT ID number is supplied. Subject to prior sale. Isdpfx Afex Hwcisfeik Visit our shop and have a look at our other offers as well. All mentioned company names and trademarks are the property of their respective owners and are used for identification and description of the products only. Deviations from technical data as well as errors in the item's description may occur and are reserved.

Condition: excellent (used), Horizontal Panel Beam Saw - With rear lifting table Numerical Control MCS Evolution Software SIEMENS WinAC RTX Outside Roller table for pre-loading (mm 5600 x 2200) + Pre-Loading Buffer Lifting table (mm) 4300 x 2200 Turning device (rotating unit) at 90° No. 2 Rear pushers (one with clamps / grippers) Twin Pusher - DUPLUS2 No. 12 clamps / grippers Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) 4300 Max blade projection (mm) 145 Max clamps opening (mm) 150 Scoring Unit (max saw diameter / power) 200 mm Main Sawing Unit (max saw diameter / power) 480 mm - Kw 27 Iodpfet Ah Nijx Affjik Adjustable speed of the saw carriage (m/min) 6 - 150 Front supporting tables with Air blowing system (N.) 4 Total power (Kw) 42 (ca.) OPTIONAL: Optimisation software: HPO

Condition: ready for operation (used), Table size: 900 x 500 x 550 mm height Iodpfx Aox Ebh Rsffjik Electrical connection: 380 V Required space: 1050 x 1050 x 1800 mm height Weight: 180 kg

Condition: new, functionality: fully functional, borehole diameter: 28 mm, Table length 3000 mm Table width 1500 mm Table height 200 mm Drilling diameter 28 mm Material thickness approx. 24.5 - 27 mm Isdpfx Afjwvkgtjfsik Side panel height 200 mm Weight approx. 1,553 kg >>> ANNIVERSARY OFFER

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 830x320x1660 mm Weight 56 kg Iedev A Hg Rjpfx Affsik Total power requirement 0,9 kw

Condition: good (used), Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, table saw, circular saw, precision circular saw -Manufacturer: Rapid, table saw saw unit: 45° pivotable -Type: Pk 100 -Motor power: 2.5 kW / 2850 rpm -Saw blade: Ø 250 mm, (max. Ø 300 mm) -Cutting height: 70 mm (max. ca. 100 mm) -Cutting width: 345 mm -Miter cut: up to 45° -Chip extraction: with gate valve for connection to a central extraction system Iiedpfx Aom Sk Hyjffjk -Dimensions 1020/850/H1300 mm -Weight: 188 kg

Condition: new, Year of construction: 2025, functionality: fully functional, Table length: 2400 mm Table width: 1200 mm Table height: 200 mm Bore diameter: 28 mm Bore grid top: 100 x 100 mm Material thickness: approx. 24.5 - 27 mm Side panel height: 200 mm Working height: 850 mm Product description: Siegmund retro special offer incl. accessories: Ijdpswvkh Djfx Affeik Welding table as built 25 years ago, additionally upgraded with plasma nitriding and current-generation table legs. - High-grade steel S355J2+N + plasma nitriding - Side panel bores in diagonal grid - Corners, edges and bores chamfered at 45° - Rib-reinforced construction - Includes base set of legs, height 650 mm Accessories: - 6 x Professional screw clamps, nitrided - 2 x stop and clamping brackets 175 L, nitrided - 10 x quick-release bolts without groove, double blackened - 8 x universal stops 225 L, nitrided - 2 x stop and clamping brackets 500 G, nitrided - 1 x accessory set

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3000x800x2100 mm Weight 1250 kg Total power requirement 0 kw Iijdpfovz Hxwox Affjk