Used Vibrating Feeder for sale (4,337)

Condition: ready for operation (used), Hazemag Hopper with Vibrating Chute Hfodsuz I Dxjpfx Afien Brand: Hazemag Dim. Hopper: 4000 x 2500 x 1350 mm Vibrating chute: length 4000 mm – width 1200 mm, Driving: two pieces vibration motors of each 3 kW.

Condition: used, Year of construction: 2007, machine/vehicle number: L151804, Nakamura-Tome NTM3 lathe together with a 6-meter IRCO SiMag Breuning bar feeder. The machine has been serviced throughout its life by Abplanalp service, who also disconnected it and prepared it for transport after production was finished. We took it in as a trade-in with plans to start some production, but it turned out to be too large for our needs – so we never even connected it since then. Technical details (from manufacturer): • Year of manufacture: 2007 • 11-axis Nakamura-Tome Super NTM3 • 2 spindles, 3 turrets • Every second tool driven • Control system: Fanuc 16i-TB • Main spindle: 15 kW, up to 4500 rpm • Sub spindle: 11 kW, up to 5000 rpm • Max turning diameter: 190 mm • Bar capacity: 65 mm • Machine weight: 12,000 kg Full documentation included: all manuals and schematics originally supplied with the machine. Additional equipment: • Parts catcher • Parts conveyor • Bar loader: IRCO SiMag • Electrical transformer Hfsdpfx Aoxg Nb Isfisn • IRCO SiMag Breuning bar feeder (6m)

Condition: like new (used), Year of construction: 2022, functionality: fully functional, The machine is a few years old, but has rarely been used. It can be inspected at our location in Weesp. Hedoxg Hxwjpfx Afiofn

Condition: excellent (used), 1 x Packaging machinery powder feeder. Located Melksham, Lift out £20. UKFM1-6804 Hfjdpfxexgg Tuj Afisn

Condition: used, Vibrating conveyor Bruks IDL000802 - length: 12 m Hfodpfx Afourt I Aoijn - width: 550 mm - electric motor 2,2 kW

Year of construction: 2023, operating hours: 343 h, condition: used, functionality: fully functional, overall weight: 10,300 kg, total length: 6,050 mm, total width: 2,450 mm, total height: 2,700 mm, machine/vehicle number: B0302, This module is suitable for nearly all materials (including moist or highly abrasive materials). Perfect technical screening even at high throughputs is achieved through the combination of 3D screening panels on the upper deck and tension mat technology on the lower deck. This combination enables almost blockage-free screening at accelerations of up to 50G – keeping your screening panel clean at all times. This machine is part of our rental fleet. Hfjdpjxgda Ejfx Afijn

Condition: ready for operation (used), Vibrating Chute Jöst Dim: length 2000 mm – width 1100 mm, Hfedpfxew Rif Ae Afien Driving with two pieces vibration motors of each 2,2 kW, incl. Springs.

Condition: used, Pneumatic gripper feeder, strip feeder FESTO type BV 50-40 Material feeder for strip material from coil or as bar feeder Feed length: max. 70 mm Strip width: max. 100 mm Sheet thickness: max. 1.5 mm Feeding force at 6 bar: 400 Newton Return force at 6 bar: 320 Newton Clamping force at 6 bar: 1300 Newton - The feeder was used for approx. 70 mm strip width - Supplied without control system and external valves Compressed air requirement: 3-6 bar Weight: 6 kg Hjdpfxexddwxo Afiefn In good condition

Year of construction: 2024, condition: new, Vibrating screen with a diameter of 1200mm. Two decks screening the material. mesh size to choose from. the sieve can run dry or wet. making the screen of carbon steel or stainless steel. 1.1kw engine 380V 50hz Good quality screening machine at a reasonable price, my sieves are already successfully working in several European countries and customers are very happy !!! Hfjdpehgv T Uefx Afijn available immediately. PayPal payment available!!! Welcome

Condition: good (used), Year of construction: 2008, LNS - Bar Loading Magazine QUICK LOAD SERVO 65 Hedpfsxf Ug Tsx Afiefn - CE marking - Year of manufacture: 2008 - Diameter range up to 65mm - Minimum bar length: 150mm - Maximum bar length: 1600mm - Loading capacity / rack depth: 620mm - Control panel Dimensions: LxWxH 2x1.4x1.7 meters / Weight 650 kg Errors and omissions excepted.

Condition: used, engines - 55 and 55 kW feed motor - 7.5 kW height adjustment motor - 1.1 kW cutting height - 200 mm cutting width - 350 mm blade saw diameter max.- 300 mm spindle diameter - 2 x 60 mm sleeve diameter - 2 x 70 mm track width - 350 mm total power - 119 kW electric feed regulation automatic central lubrication minimum length of the element - 600 mm electric height adjustment shaft height adjustment six upper pressure rollers pneumatic clamps five anti-ejection pawls ruler stub diameter - 220 mm spindle speed - 4500 RPM dimensions of the machine (length / width / height) - 275 / 235 / 210 cm weight - ~ 7000 kg Feeders: max. cutting length - 1850 mm min. cutting length - 800 mm max. material length - 2500 mm min. material length - 600 mm max. material width - 700 mm max. material height - 200 mm roll width - 700 mm roll diameter - 130 mm number of rolls - 26 3 smooth pressure rollers 4 toothed pulling rollers feed adjustable on the inverter 0-70 m/min. central lubrication of saw guides power of the saw motor - 2 x 9.2 kW feed motor power - 1.5 kW Hodpfxswrw D Ro Afiefn power of the disc spreading motor - 3 kW chain motor power - 1.1 kW dimensions (length / width / height) - 7050 / 2100 / 1850 mm

Condition: used, - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Hfjdpfx Asxcxtlofisn Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: good (used), Year of construction: 2010, Internal Article No.: 25062 Swiss Tec MFT-600 Year: 2010 Fiber Laser 1070 IPG 100W 4-Axis Laser Cutting System Hfodpfsxctwfsx Afien + Bar Loader Iemca Elite 112 / Type: 32LL (Year: 2010) Laser (LxWxH): 160 x 140 x 170 cm / Weight: approx. 1200 kg Bar loader (LxWxH): 420 x 60 x 140 cm / Weight: approx. 500 kg

Condition: ready for operation (used), Vibrating Chute Zippe Dim: length 1000 mm – width 1000 mm, Hfedpfew Rudwex Afion Driving with two pieces vibration motors of each 0,9 kW

Condition: excellent (used), Mini FlowPack SVD – a unique device on the market for packaging both individual items and bulk components such as screws, parts, etc. The machine is equipped with a special loading funnel and a film roll holder. It forms a bag from the film, seals the side and top, enclosing the product inside, while simultaneously preparing the next package. Make-Fill-and-Seal Bagging Machine This is a manual, vertical flow-pack type packaging machine, designed for producing, filling, and sealing bags in a three-step process. It is ideal for packaging seeds, granules, screws, machine parts, and other solid loose goods (not suitable for powders like flour). The machine uses polyethylene film with a recommended thickness of 40–60 µm. The resulting bag has a width of approximately 160 mm and a length of 50–180 mm. Operation steps: The bag is formed from a roll of film placed on the machine The bag is filled through a dosing chute Sealing and cutting of the filled bag occur in a single step ✅ End-of-sealing audible signal ✅ Lightly used Model: SVD-160/190 – Technical Specifications Power supply (V/Hz): 230 / 50 Installed power: 0.18 kW Bag width: ~160 mm Bag length: 50–180 mm Seal width: 4 mm Hodexfvk Tjpfx Afiofn Sealing time: 0.1 – 1.6 s Max film thickness: 0.06 mm Film roll width: 400 mm only Net weight: 30 kg Machine dimensions (L x W x H): 500 x 500 x 650 mm

Condition: good (used), Motor: 7.5 kW dimensions: 800x500x500mm Hfsdpfegu U Agex Afijn weight: cca : 650 kg

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, I am offering an industrial cup/container feeder designed for automated packaging feeding in production lines. The machine is constructed entirely from stainless steel and complies with standards for the food, cosmetics, and pharmaceutical industries. Technical specification: • Construction: acid-resistant stainless steel • Hopper capacity: approx. 50–100 l • Bucket elevator with guides • Adjustable stabilizing feet • Electric and pneumatic drive (requires compressed air) Hodpfoxftr Ujx Afisfn • Can be integrated with cup filling and sealing lines • Complete, fully operational machine • Cap width: 50 mm • Possibility to install different feed rail sizes; permanent 95 mm and 110 mm profiles included • Compatible devices with this machine are listed in our other auctions. A complete production line can be assembled: Automatic labeller for containers from 25 ml and similar Automatic capping and cap application machine Stainless steel cap feeder Automatic labeller with belt conveyor – self-adhesive labelling system Rotary infeed/outfeed table for production line – stainless steel Condition: used, very good technical condition, no damage.

Condition: used, Vibratory Bowl Feeder / Sorting Unit / Spiral Feeder / Vibratory Conveyor RNA Vibratory bowl, sorting device / screw feeding unit with vibratory feeder for screwdriving applications Hodpfx Aeux Shvefiofn Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SRC-N 250-2L Serial No.: Year of manufacture: approx. 2000 Bowl diameter (bottom): 300 mm Bowl diameter (top): 350 mm Bowl internal height: approx. 25 mm Sorting track width: approx. 30 mm Total height (drive + bowl with sorting track): 380 mm Oscillation frequency: 100 Hz / 6000 rpm Power supply: 230 V, 50 Hz - RNA control unit, type ESG 90, for adjustable vibration speed - The feeder was used for feeding automotive blade fuses Space requirement Ø x H: 420 x 390 mm Weight: 52 kg In good condition A bowl feeder always consists of two main components. 1) Sorting bowl, which aligns the parts 2) Drive unit, which generates vibrations in the bowl via mechanical oscillation and thereby moves the parts.

Condition: excellent (used), Year of construction: 2022, operating hours: 200 h, functionality: fully functional, machine/vehicle number: C 2202067, Pallet Box Tipper 120x80x90 Hfodsxfg A Tjpfx Afisn Allows you to empty the contents of a pallet box fitted with wooden extensions. A pneumatic cylinder system locks the pallet onto the tipper. Maximum pallet weight to be tipped: 1000 kg. This ROTOVID 135° box tipper, model RV135, is ideal for completely emptying the contents of your boxes. With a 135° rotation, it allows efficient rotation and emptying of your containers. FEATURES OF THE ROTOVID 135° BOX TIPPER: - Rotation and return controls via hold-to-run push buttons - Side and rear safety guards - Electrically actuated check valves at cylinder exits - Floor fixing brackets - Receptacle size adaptable to your requirements - Fixed containment barrier - Customizable discharge height - Light curtains compliant with European standard ISO 13855 - Discharge chute - Fixed retaining bar - Discharge flap - HDPE coating - Protective grilles compliant with European standard ISO 13857 - Designed and manufactured in France

Condition: ready for operation (used), Vibrating Chute Jöst Type: FUF Hfjdpfx Aotzniaofien Length 3500 mm – width 500 mm with two pieces vibration motors of each 1 kW

Condition: used, Year of construction: 2015, Coiltech strip line consisting of: servo feeder, straightening machine, decoiler. Strip width: 100-800 mm. Strip thickness: up to 5.5 mm. Hjdpfx Aexfcdgjfijfn

Condition: excellent (used), Year of construction: 2007, 1 x oil-flooded single bar feeder LNS Super Hydrobar 6.65 HS-4,4 Year of manufacture: 2007 In very good condition. Previously installed on Traub TNA 300 Technical data: Diameter: 32/40/48/55/62/68 mm Bar length: 3,100 mm Accessories: Machine feet Operating manual with circuit diagrams Hedevawtpepfx Afisfn The bar feeder can be inspected at our warehouse in Reichenbach.

Condition: not inspected (used), HYDROBAR LNS NOT INSPECTED Hjdpfsxdxhxox Afijfn

Condition: used, Vibratory bowl feeder / Sorting device / Bowl feeder / Vibratory feeder RNA Vibration bowl, sorting device / Screw feeding with vibratory feeder for screw technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial No.: Year of manufacture: approx. 2000 Bowl diameter bottom: 250 mm Bowl diameter top: 380 mm Bowl internal height: approx. 70 mm Sorting track width: 30 mm Total height (drive + bowl with sorting track): 390 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - RNA control unit, type ESG 90 for adjustable vibration speed - Vibration bowl with rubber lining - The feeder was used for feeding automotive blade fuses Space requirement Ø x H: 420 x 390 mm Hedpfx Afjuqrahoisfn Weight: 50 kg Good condition A bowl feeder always consists of two essential components: 1) Sorting bowl, where the parts are oriented 2) Drive unit, which generates mechanical vibrations in the sorting bowl to move the parts.

Condition: ready for operation (used), Vibrating Chute Metso (unused) Type: TKP 10-20 Dim: length 2000 mm – width 1000 mm, Driving with two pieces vibration motors of each 1,8 kW Hedpfxsxfd Dbe Afijfn incl. springs. On stock: 4 pieces.