Henkel hopper with vibrating discharge grid

Henkel hopper with vibrating discharge grid

Condition: used, functionality: fully functional, Single-deck pre-screening machine Screening area: approx. 1,250 x 2,000 mm Driven by two 4 kW unbalanced motors Gbodpfxjwm Ndxo Ak Uot Mounted on a steel structure with discharge chute

Condition: good (used), Manufacturer: Hein Lehmann Liwell Type: LF 2,0 – 5,04 / 24 ED Deck size: 2.000 x 5.040 mm Number of decks: 1 Included: – Frame – Electrical Motor Gbjdpfx Akoy A N Ato Ust Vibrating screen can be sandblasted and painted.

Condition: like new (used), functionality: fully functional, New feed hopper, approx. 11 m³ Inlet opening: approx. 4.0 x 2.4 m Gedjzvytgjpfx Ak Uebt new steel structure with BRÄUER discharge chute Working area: 600 x 1,000 mm Drive with 2 unbalanced motors

Condition: good (used), functionality: fully functional, Year of construction: 1994, “Hein Lehmann Liwell LF 2,0 – 6,30 / 20 DD” for Sale Manufacturer: Hein Lehmann Liwell Type: LF 2,0 – 6,30 / 20 DD Mach.No.: 1489 Year of Manufacture: 1994 Deck size: 2.000 x 6.300 mm Number of decks: 2 Gbodsu Tiwgepfx Ak Uet Included: – Frame – Electrical motor with console – Cardan-shaft – Rubber springs Vibrating screen can be sandblasted and painted.

Condition: good (used), Manufacturer: Stuckstette Gedpfx Aksg Snudo Usbt Size: 1.500 x 4.500mm Decks: 4 Frame: Not included Included: – Electrical Motor – Springs Vibrating screen will be overhauled, sandblasted and painted.

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 16951-3.3, input voltage: 400 V, overall weight: 22,000 kg, input frequency: 50 Hz, We offer this used Eldan Recycling HR162T-33 machine, ELDAN HR 162T-33 model, manufactured in 1999. Year of manufacture: 1999 Power: 162 kW Weight: 22000 kg Serial number: 895153 Voltage: 3 x 400 V Frequency: 50 Hz For sale is an industrial ELDAN Granulator 160 (year of manufacture 1999), designed for shredding rubber in recycling processes. The machine comes from a complete tire recycling line and is in very good technical condition. THERE IS AN OPTION TO PURCHASE THE COMPLETE LINE. Application: rubber granulation, tire recycling, rubber granulate production, material preparation for further separation. Advantages: renowned manufacturer ELDAN Recycling, Gsdjzmvclepfx Ak Usbt robust industrial design, designed for continuous operation, high reliability, easy integration with existing production lines. The granulator can be sold separately or as part of a complete tire recycling line available in our offer. Inspection possible after prior arrangement. We provide assistance with loading. Additional photos, videos, and technical documentation are available upon request. Incoterms: EXW – Poland ELDAN GRANULATOR 160 – INDUSTRIAL RUBBER GRANULATOR ELDAN Granulator 160 (Year of manufacture: 1999) for sale. Industrial granulator designed for rubber size reduction and tire recycling applications. The machine comes from a complete tire recycling plant and is in very good technical condition. Applications: Rubber granulation Tire recycling Rubber granulate production Material preparation for further separation Key Features: Manufactured by ELDAN Recycling Heavy-duty industrial construction Designed for continuous operation Reliable and easy to integrate into existing recycling systems The granulator can be sold separately or together with the complete tire recycling line also available for sale. Inspection is possible by appointment. Loading assistance is available. Additional photos are available upon request. Incoterms: EXW – Poland

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Gedszp H R Ejpfx Ak Ujbt Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Year of construction: 2008, condition: used, machine/vehicle number: 51E361-010-02, IFE Processing Technology Year of manufacture: 2008 For sale: 2 identical screens, each equipped with 2 unbalance motors. Gedpfoxztbhex Ak Uebt The price is for 1 screen.

Condition: new, functionality: fully functional, fuel type: electric, color: other, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO manufactures and installs stationary type stone crushing and screening plants according to customer requirements. Production capacity of our stationary plants differs from 100 to 1000 ton per hour. Gbjdpfoy Dbc Ujx Ak Ujt 750 Tons/hour capacity of Crushing and Screening Plant: - Feeding Bunker (50 m3) -1300x5000mm Double Stage Wobbler Feeder - PDK-150 Primary Impact Crusher - 2000x6000x2 Vibrating Screen - DMK-03 Secondary Impact Crusher - 75 m3 Stock Hoppers - 20 m3 Hopper for Vertical Shaft Impact Crusher - VSI-1000 Vertical Shaft Impact Crusher with open rotor - 2000x6000x3 Horizontal Vibrating Screen - Stock and Feedback Conveyor Belts - Control Cabin, Electrick Panel and Cables FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: ready for operation (used), * Brand: SBM Austria * Model: screening machine with discharge conveyor * Screen surface: 3500 x 1300 mm - 1 deck. * Driving: 7,5 kW E-motor. * Incl.: steel support. * Discharge conveyor: A-A length = 11000 mm, Beltwidth: 800 mm. * Driving: 7,5 kW gearmotor. Gbjdpfxjywncbj Ak Uet