Used Ventrac 3200 for sale (1,299)

Condition: ready for operation (used), Year of construction: 1997, sheet width 3230 mm plate thickness 2.5 mm thickness at "Niro-steel" 1.5 mm no. of strokes 28 - 42 Hub/min cutting angle 1.60 Grad table height 820 mm distance between columns 3540 mm Control ELGO 87P engine output 6.8 kW weight of the machine ca. 3410 kg. range L-W-H 4070 x 2070 x 1400 mm from a maintenance workshop including special accessories (!!) Equipment: - robust / motorized swing cut guillotine shears - break-proof, torsion-free steel welded construction - compact and clear machine design Cgodpfoxacd Nox Abbon - NC electro-motorized back stop - including NC ELGO "TYP 87P" digital control unit * adjustable from the front right * with target/actual value position input * continuous adjustment over the entire travel range * rough adjustment via push buttons * protection of the limit values ??with limit switch - "Duo-Cut" drive with two dynamic, powerful gear motors - support table with recessed grips - hold-down bar with hard rubber strip - all-steel knife with two cutting edges - selector switch for single and continuous stroke - 1x freely movable foot switch - safety device at the rear - original operating instructions Special accessories included: - pneumatic sheet holding device for thin sheet metal cuts - 1x extra long side stop, including support foot + digital stop - 2x extra long, front support arms * with "SLIDING" mount - for easy moving

Condition: ready for operation (used), Year of construction: 2005, sheet width 3220 mm plate thickness 2.0 mm ST thickness at "Niro-steel" 1.0 mm upper clamping bar adjustment 160 mm adjustment speed 100 mm/sec Adjustment folding beam 80.0 mm bending speed ca. 120 Grad/sec back stop - adjustable ~ 10.0 - 2.000 mm adjustment speed 300 mm/sec compressed air 6.0 bar work height max. 869 mm control POS 2000 voltage 400 V total power requirement 10.4 kW weight 3750 kg range L-W-H 4550 x 3150 x 1600 mm current new price ~ €150,000 from a maintenance workshop with very good equipment (!!) Features: - CNC electro-motor-driven universal folding machine * ??High-precision mechanics with modern control technology * For single and series production * Robust high-speed machine with high axis speeds * Torsion-free welded construction - Rotating upper beam / as an automatic tool change system * With 2 tool stations (sharp and goat's foot bending rails) * Reduces setup and idle times * Eliminates time-consuming tool changes and adjustments - SCHRÖDER CNC control model "POS 2000" * Touch panel at the front right (can also be operated with a PC mouse) * Color display * USB interface * Automatic cutting calculation * Material and tool library * Accurate bending simulation * Windows XP operating system - Servo-driven control Drives Cgsdpexnqwtsfx Abbon * for bending/upper beam and electric backgauge - CNC electric lower beam adjustment - CNC electric backgauge * Travel speed 300 mm/sec. * With rear sheet support surface (stainless steel sheets) - 1x freely movable double foot switch - Operating instructions (PDF) Special accessories included: - 1x 30° upper tool sharpening rail - 1x split set of upper tool goat's foot rails, H = 130 mm - 1x 10.0 mm bending rail - 1x 25.0 mm bending rail

Condition: used, Platform trolley, transport trolley, heavy duty truck, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy duty trailer -Heavy-duty transport trolley: industrial trailer with 2-axle steering -Platform: 3200/1600/H490 mm -Load capacity: 4 t -Tires: solid rubber 310/120-220 -Total dimensions: 5530/1600/H590 mm Cedpferzvwpjx Abbogn -Transport dimensions: 3620/1600/H590 mm -Weight: 540kg

Condition: good (used), Clamping plate with T-slots, plate field, welding table, welding table, T-slot plate, clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate Csdpfx Aev D Hkrebbegn -T-slot plate: clamping plate on solid base frame -Length: 3200 mm -Width: 1625 mm -Groove width: 30 mm -Dimensions: see drawing in the photos -Dimensions total: 3200/1625/H720 mm -Weight: 2300 kg

Condition: used, Year of construction: 2009, conveyor belt, belt conveyor, transport belt, belt conveyor Csdpstrhm Uefx Abbsgn -Manufacturer: Grenzebach, conveyor belt type ZFT -Speed: frequency controlled -Conveyor belt length: 3200 mm -Belt spacing: 400 mm -Drive: SEW-Eurodrive 0.075/0.37 kW 280-1400/14-72 rpm -Number: 2x conveyor belt available -Price per piece -Dimensions: 3260/1180/H990mm -Weight: 220 kg/pc.

Condition: good (used), Crane block, crane hook, load hook, single hook, lower block -Manufacturer: Verlinde, Crane hook: Crane hook type FEM 3 m Cgedpfxswpfppj Abbsn -Load capacity: 3.2 t -Dimensions: 600/280/135 mm -Weight: 30 kg

Condition: good (used), Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist -Manufacturer: Grab hoist, multi-purpose hoist type TU 32 with steel cable -Load capacity: 3200 kg -Steel cable: Ø 16.3 mm / length 30 m -Number: 2x cable pull available -Price: per piece Cjdpfjw D Ai Asx Abbogn -Dimensions: 680/170/H340 mm -Total weight: 65 kg/set

Condition: used, Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor -Roll width: 805 mm -Conveying length: 3200 mm -Diameter roller: 90 mm -Center distance: 200 mm -Height: 280 mm -driven: via sprockets -Geared motor: 0.37 kW Cgjdeca Iakjpfx Abbjn -Speed: 10.8 m/min -Number: 1x roller conveyors available -Price: per piece -Dimensions: 3200/920/H280 mm -Weight: 362 kg

Condition: good (used), Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Quantity: 30x chain hoists -various manufacturers: Yale, Brand, BKS -Load capacity: from 750-3200 kg -Chain length 1.0-2.5 m -Price/Sale: complete -mostly functional Cgodpfxsb A Rkhj Abbjn -Dimensions: 1200/800/H600 mm -Weight including packaging: 600 kg

Condition: good (used), Pallet rack, heavy-duty rack, high-bay rack, boltless rack, storage rack stand -Pallet rack: Boltless rack 2 bays / rack length 3900 mm -Field width: 1800 mm -Shelf height: approx. 3200 mm -Stands: 3 pieces 3155/1240/100 mm -Cross braces: 20 pieces 1865/60/240 mm -Shipping/Price: complete Cgjdpfx Ajw Thy Debbjn -Transport dimensions: 3200/1250/H660 mm -Total weight: 352 kg

Condition: good (used), Year of construction: 1999, Indoor crane, crane, electric wire rope hoist, hand trolley, push trolley, crane trolley, trolley undercarriage, crane undercarriage, trolley, girder undercarriage, overhead track undercarriage -Manufacturer: Steel, crane chassis with electric rope hoist -Cable pull: Type AS 3016-16 2/1 -Load capacity: 3200 kg -Main stroke: 8 m/min Csdpfx Aetlzdqobbsgn -Fine stroke: 1.35 m/min -Traction drive: FA-C 3728 133-1 -Travel speed: 5/20 m/min -Roller spacing: 1400 mm, dimensions see photos -Drum speed: 16.0 / 4.0 m/min -Number: 2 crane trolleys available -Price: per piece -Transport dimensions: 1670/1200/H470 mm -Weight: 462 kg/piece

Condition: used, Roller conveyor, conveyor belt, roller conveyor belt, dust brushing machine, cleaning brushing machine, brushing device, cleaning machine, roller conveyor -with adjustable baffle - Finishing: with a soft brush on top - Compressed air blow-off nozzles at the bottom -Roll width: 1100 mm - Conveying length: 3200 mm -Diameter roller: 85 mm - Center distance: 150 mm -driven: via gearbox -Speed: m / min -Dimensions: 1600/3300 / H1350 mm Codpfx Abeb Ryn Sjbegn -Weight: 600 kg

Condition: good (used), Year of construction: 2010, Press brake, bending machine, bending machine, swing bending machine, die bending machine -Machine: can be viewed while powered on -CNC press brake: with 3 axes and laser safety system -Working width: 3200 mm -Pressure force: 125 tons -Max. stroke of the bending beam: 160 mm -Working hours: hrs. -Switching hours: hrs. -Distance between the stands: 2700 mm -Backgauge travel: 590 mm -Backgauge: 2 axes electronically movable, 1 axis manually movable Accessories: see pictures Cgjdpfxoxxz E Ne Abbsn -Installation dimensions: 2140/5195/H2530 mm -Transport dimensions: 1680/5195/H2530 mm -Weight: 9300 kg

Condition: good (used), Year of construction: 1988, Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device -Manufacturer: Yalel, multi-purpose cable pulley type Yaletrac 3.2 TON -Load capacity: 3200 kg Cedpfxexbcxij Abbsgn -Steel cable: Ø 16 mm / not included, selection in stock at an additional cost -Number: 2x cable pull available -Price: per piece -Dimensions: 700/150/H370 mm -Weight: 22 kg/piece

Condition: good (used), Year of construction: 2017, Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device Cgsdpfx Abjxbcmyebon -Manufacturer: McBull, multi-purpose cable pulley type CSZ32BODY with steel cable -Load capacity: 3200 kg -Steel cable: Ø 16 mm / length 20 m see photos -Cable pull: Dimensions 665/150/H335 mm -Transport dimensions: 680/500/H220 mm -Total weight: 50 kg

Condition: used, Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: Scharmann, DC motor from a Scharmann table boring mill -Power: 3 - 11 kW -Speed: 220 - 3200 rpm -techn. Data: see photo nameplate -Shaft: Ø 45 x 104 mm Csdeg D H Dcspfx Abbjgn -Construction: B3 -Dimensions: 1000/550 / H450 mm -Weight: 509 kg

Condition: used, Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: Kessler, DC motor -Type: GM50/60/1/U Cgsdpfx Ajgiqh Ujbben -Max. Speed: 3200 rpm -Power: 16 kW -Voltage: see photo nameplate -Shaft: Ø 55 x 100 mm -Construction: B3 -Dimensions: 1010/570/H520 mm -Weight: 610 kg

Condition: used, Year of construction: 2014, Transnorm conveyor belt GF 3200-700-600 RA2183 Technical data: Conveyor length (NL): 3200 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,58 Drive: SEW gear motor, SA37/T DT71D4/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Csdpfx Ajq H T Rvebbegn Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2014, Transnorm Rising falling Incline belt conveyor with leading belt GF 3200+6000+2500-700-600 RA2156 Cgsdpjq Izpnjfx Abbon Technical data: Conveyor length (NL): 11700 mm ( 3200 mm arch + 6000 mm riser segment + 2500 mm leading ) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,42 Drive: SEW gear motor, R27 DT90S4/BMG/TH Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 2012, condition: ready for operation (used), An FMB bar feeder including a bundle loader is available. Bar diameter range: 8mm-80mm, max. bar length: 3200mm, feed speed: 1000mm/s, return speed: 1400mm/s, max. remnant length: 580mm. Machine dimensions X/Y: approx. 4700mm/1500mm, weight: approx. 1300kg. Documentation available. On-site inspection is possible. Cedpfxox Tumle Abbsgn

Condition: new, Catalogue number H0548 - New machine, in stock - CE certificate - Cutting length: 3200 mm - Cutting width: 1150 mm - Cutting height 90°/45°: 80/55 mm - Max. blade diameter: 305 mm - Blade adjustable up/down and at 45° angle - Scoring blade diameter: 120 x 20 mm - Main saw speed: 4500, 5500 rpm - Scoring saw speed: 8000 rpm - Motor: 5.5 kW / 400 V - Scoring motor: 1.1 kW - Carriage guided on steel rods Overall dimensions: - Length: 3220 mm - Width: 3150 mm - Height: 900 mm - Weight: 700 kg - Mechanical height adjustment - Mechanical tilt adjustment Cgodpfx Abex Rqrljbjn - Table extension - Table widening - Angle cutting fence - Includes main blade and scoring blade Net price: 20,320 PLN Net price: 4,990 EUR Net price calculated at exchange rate 4.1 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Year of construction: 2009, condition: used, Technical details: tool taper: Ø 54 voltage: 3Ph AC 400V / 50-60 Hz V / Hz compressed air: Anschluß: 6 bar total power requirement: 11 kW Total weight, approx.: 120 kg dimensions L x W x H: 0,7 x 0,65 x 1,7 m Cgodpfewp I S Hsx Abbsn Application: for secondary quick tool change through targeted inductive heating. Induction shrink fit unit with water cooling (tank 30 litres, built into the housing) Cooling medium: emulsion for Ø 3 - 50mm HM (carbide) and Ø 6 - 50 HSS tools Tool holder Ø 54mm Concentricity < 0,003mm ThermoGrip chuck Operation via control panel *

Condition: used, Technical details: weight max.: 3,2 t clamping width: 3200 mm Codpfxsu Nvfto Abbogn weight of the machine ca.: ca.1 t traverse in the front/ hoist behind already sold *

Condition: excellent (used), Year of construction: 2005, Arburg 720 S 3200-2100 Injection Moulding Machine Year of manufacture: 2005 The machine is in very good technical condition, fully operational and ready for immediate use in an industrial facility. The clamping force was factory-upgraded by Arburg to 3600 kN; the machine has received factory servicing. Clamping unit Clamping force: 3,600 kN Platen dimensions (H × W): 1,040 × 1,040 mm Tie bar spacing (H × W): 720 × 720 mm Minimum mould height: 300 mm Maximum daylight opening: 1,400 mm Injection unit Screw diameter: 70 mm Shot volume: 1,078 cm³ Shot weight: 984 g Injection pressure: 2,000 bar Electrical–hydraulic equipment Pump motor rated power: 55 kW Heater power: 30.3 kW Dimensions and weight Net weight with control cabinet: 17 t Cjdpfxjx Thw Rs Abbogn

Condition: new, Year of construction: 2025, functionality: fully functional, A sliding table saw for working with high density boards, MDF boards, ABS and PVC panels, solid wood and other wood-based materials of similar structure and hardness. The saw is designed for small and medium carpentry work. Strong, professional sliding table saw with a movable table on bars and a separately powered scoring. Saw tilts in the 90–45 degrees range Solid, durable design ensures stability and work safety Controllable speed adjustment Technical data Table dimensions 970×550 mm Sliding table length 3200 mm Cutting width by the fence 1200 mm Transverse cutting by the transverse cutting guide 3100 mm Saw tilt 0°–45° Saw diameter Ø350 mm Saw hole diameter Ø30 mm Saw blade height 0–87 mm Saw blade 350 max height 105 mm Saw blade height at 45° angle 0–60 mm Saw blade 350 max height at 45° angle 73 mm Main saw spindle speed 4000 / 6000 rpm Scoring saw diameter Ø125 mm Scoring saw hole diameter Ø20 mm Scoring speed 8000 rpm Main motor power 5.5 kW Scoring motor power 0.75 kW Codpfxjtz Smij Abbogn Intake connector under table diameter 100 mm Intake connector diameter in the saw guard 80 mm Machine weight 680 kg Available equipment Cutting saw Scoring Transverse cut fence Longitudinal fence Modern - ergonomic saw guard Worktop extension Fence for mitre cutting Saw blade tilt gauge indicator User manual EC declaration of conformity