Used Vbmt Turning Plates for sale (19,735)

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Technical details max. workpiece diameter 400 mm workpiece length - max. 300 mm Control SIEMENS 840Dsl swing diameter 520 mm chucking diameter 500 mm travel x / y / z 995/+,-30/580 mm Additional information Operating hours (total): 1848 hours 1.2.2 BASE TURRET UNIT AND Y-AXIS SLIDE UNIT The Y-axis slide unit is mounted on the side of the machine base. A fast-reacting, position-controlled, and maintenance-free servo motor is used for the axis drive. It drives the slide via a high-precision ball screw. A linear measuring system is built into the Y-axis. Positional accuracy: 2 µm. BASE TURRET UNIT Shortest swivel times thanks to direct swivel drive, cooled for consistent accuracy. MAIN SPINDLE 37.7 KW 1.2.3 HP TURRET DRIVE UNIT FOR DRIVED MACHINE TOOLS (C442) With internal coolant supply to the tool.* Max. speed 6,000 rpm Crosscut speed 3,200 rpm Torque at 100% duty cycle 54 Nm/18.1 kW Torque at 40% duty cycle 83.6 Nm/28.0 kW Torque at 10% duty cycle 100 Nm/33.5 kW 1.2.4 TOOL CARRIER UNIT FOR DRIVED TOOLS TOOLS, 12xBMT75 for BMT75 tool holders 1.2.6 ROTATING WORKPIECE TRANSPORT SYSTEM, O-TYPE Drag frame system for 10 workpieces Max. workpiece height (including workpiece pallet) 300 mm Max. workpiece weight 60 kg 1.2.7 SET (10 pieces) DRAG FRAME for O-type belt For workpiece diameters 150 - 400 mm 1.2.8 BLOW-OFF OF THE WORKPIECE AND THE CLAMPING DEVICE (PICK-UP) 1.2.10 COOLANT SUPPLY 15 bar Coolant pump flow rate approx. 80 l/min at 15 bar. COOLING UNIT (6.5 kW, water-air) A cooling unit (with dual-circuit technology) regulates the machine's thermal balance. The spindle drive, control cabinet, and turret are kept at ambient temperature (10°C - 40°C). Cooling capacity: 6.5 kW 1.2.11 COOLANT DOUBLE FILTER, MANUALLY SWITCHABLE Filter fineness 100 µm, with electrical and mechanical contamination indicator 1.2.12 CHIP CONVEYOR, HINGED BELT VERSION - REAR-FACING Chip discharge height 1100 mm. /With integrated coolant reservoir, capacity approx. 500 l. 1.2.13 EMULSION MIST EXTRACTION Extraction capacity approx. 800 m3/h 1.2.14 FLUSHING GUN 1.2.16 WORKPIECE MEASUREMENT with a measuring probe that is completely protected from chips and coolant outside the work area. Gbjdpfx Afsw Hxuaoiju 1.2.17 BLOW-OFF PROBE 1.2.19 ENGRAVING SOFTWARE PACKAGE 1.2.20 TOOL LIFE MONITORING - SISTER TOOL MANAGEMENT 1.2.21 TOOL BREAKAGE MONITORING TOOLINSPECT MCU - EUROPE (SIEMENS 840DSL, FANUC 31i/32i) 1.2.23 3-COLOR INDICATOR LIGHT 1.3.2 AXIAL DRILLING AND MILLING HEAD - BMT75 CC 1.3.3 ANGLE DRILLING AND MILLING HEAD 90° - BMT75 CC (i=1:1) 1.3.4 TOOL SET FOR OP10 + OP20 1.3.7 HYDRAULIC FULL-CLAMPING CYLINDER SIZE 150 - with 1 media feedthrough The coolant is supplied to the workpiece through the main spindle and the clamping device. 1.3.10 3-Jaw Power Chuck KNCS-N 500-155 Quick Change n max. = 2200 rpm (Recommended speed according to DIN 6386) - Set of hard base jaws - Set of soft top jaws 1.3.11 Attachments for KNCS-N 500-155 Consisting of: - Chuck flange DIN 55026 A11 - Drawbar adapter with through-hole and shut-off valve for central air or coolant supply - Mounting screws 1.3.12 Irrigation nozzle in chuck bore Additional tool holders with tools

Condition: used, Year of construction: 2002, Technical details: turning diameter: 370 mm turning length: 200 mm Spindle 1 RPM: 4000 1/min control: Siemens 840 D Spindle 2 RPM: 4000 1/min power capacity: L / R 18/24 kW max. torque on the spindle: 630 nM C-Axis: 0,001° Turret No.1 stations / rotary tools: 12/12 VDI 40 Turret No.2 stations / rotary tools: 12/12 VDI 40 turning speed range - milling: 3000 1/min power capacity - milling spindle: 8,8 kW torque rotary tools: 28 Nm Bar capacity spindle 1: 85 mm total power requirement: 65 kVA weight of the machine ca.: 13 t dimensions of the machine ca.: 5,7x2,4x2,1 m Travel x1: 260 mm Travel x2: 260 mm Travel Y1: 600 mm Travel y2: 600 mm Accerories Chip conveyor ls Parts and total counter Automatic separation wall Standard set of tool holders Power Chuck 2 x 250 mm manual tool eye l & r High performance 6-axis subspindle CNC-Lathe with twin turren and rotating tools. * Gedpfjxlrkcox Afijbu

Year of construction: 2018, condition: ready for operation (used), General Data Measurements width 1863 mm Measurements depth 3700 mm Measurements height 1900 mm Machine weight 5950–6100 kg Control Unit Brand FANUC Main Drive Number of spindles 2 Spindle speed range 2800 Number of axis 4 Movement X-Axis Movement 260 mm X-Axis Rapid Traverse 30 m/min Z-Axis Movement 830 mm Z-Axis Rapid Traverse 30 m/min B-Axis Movement 830 mm B-Axis Rapid Traverse 30 m/min Gbedpfoxlvbfex Afisu Workpiece Workpiece drm over bed 780 mm Tail Stock Pinol diameter 100 mm Tools Number of station 12 This 4-axis DOOSAN Puma 2600/500 horizontal turning machine was manufactured in 2018. It features a maximum turning diameter of 481 mm and a length of 755 mm, with rapid traverse rates of 30 m/min on the X, Z, and B axes. The spindle supports a speed of 2800 rpm and a through hole diameter of 115 mm. Ideal for precision turning operations. Contact us for more information about this machine. Application Types Turning

Condition: used, Year of construction: 1999, max. bar material dia. 42 mm max. turning diameter 180 mm turning length 350 mm control FANUC 18i Main-/Counter -spindle turning speeds 6.000 U/min number of tapers in turret head 2 x 12 tool taper VDI 25 Gjdpfx Aoxlugmefisbu travel -x axis 170 mm travel -z axis 350 mm CNC Turning- and Milling Center | SCHAUBLIN - 42S TM-6 with main and sub-spindle, 2x turrets aligned for driven tools and equipped with a bar feeder. The machine has 7.856h running hours. The machine is in good condition and can be inspected under power. For further technical details, please refer to the attached offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: 42STM-6 | 42STM | 42STM6 | 42 S TM-6

Condition: used, Year of construction: 2011, turning diameter 16 mm turning length 145 mm control Sinumerik 828 D number of spindle speeds 15000 gripping station 16 spindle speed: 15000 load magazine ILS-MUK 7012 Breuninger Irco high-pressure pump Knoll total power requirement 15 kW weight of the machine ca. 2,6 t dimensions of the machine ca. 2.1 x 1.1 x 1.9 +Irco ILS mm Turn-mill centre for maximum precision Benzinger DoLittle B3, built in 2011 with short barloader Irco ILS-MUK 7012 (bar length 1200mm). Excellent conditions! Gbsdpfx Afjvxa E Seisu - Dolittle B3 main and counter spindle with linear tool structure Tool stations: Main spindle 10 tools + 1 stop (2 blocks 5 tools each + 1 stop) Counter spindle 11 tools (2 blocks of 5 and 6 tools) Driven tools via the swivelling axis 6 tools Machine ON/OFF: 1 shift There are 10 tool blocks in total. Technical data - Traverse path X1 axis 320mm - Traverse path Z1 axis 145mm - Traverse path Z2 axis 90mm - Traverse path Y-axis 80mm - 2x C-axis - Rapid traverse speeds X/Y/Z 30 m/min - Water-cooled motor spindle 16 mm, 15,000 1/min - BENZINGER linear tool carrier system - Swivelling NC axis with 6 driven tools Accessories: Knoll high-pressure pump Hydra cooling system Suction channel Tool holder, collets 10 tool blocks

Condition: excellent (used), Year of construction: 2014, operating hours: 7,690 h, functionality: fully functional, turning diameter over cross slide: 560 mm, turning length: 530 mm, turning diameter: 240 mm, spindle speed (max.): 5,000 rpm, For sale: CNC lathe, brand Weiler, model DZ 65. The machine is equipped with 12 driven tool stations and is in excellent condition with low operating hours. Package including accessories available for a total price of €65,000. Technical data: Year of manufacture: 2014 Control: Siemens 840D SL Operating hours: 7,690 h Bed arrangement: 45° slant bed Height of spindle center above floor: 1130 mm X travel: 207.5 mm Face length tip: 745 mm Z travel: 530 mm Turning diameter: 560 mm Rated power at 1000 rpm: 27 kW Spindle speed range: 50–5000 rpm Torque: 260 Nm Max. chuck size: 200 mm Spindle bore: 77 mm Spindle diameter at front bearing: 120 mm Bar capacity in draw tube: 65 mm Tailstock NC controlled Center taper: MK 4 Power: 4 MK Torque: 9.5 Nm Longitudinal travel: 525 mm Z-axis travel: 530 mm X-axis travel: 207.5 mm Gbjdpfx Aeuxc Tcofiou Z-axis rapid traverse: 30 m/min X-axis rapid traverse: 30 m/min Number of tool positions: 12 Tool shank cross-section: 20 x 20 mm Tool holder: VDI 30 Dimensions: 3180 mm x 2050 mm x 2200 mm Weight: 6300 kg Additional information: - Bar feeder hardware is pre-installed but requires activation - Supplied with chip tray only, chip conveyor available from Weiler - Equipped with oil skimmer - Offer does not include tool holders and collets, but these can be included upon request Transport and loading can be arranged at extra cost, Europe-wide. Prices are plus VAT. Inspection possible by appointment. Please contact us – our team is happy to support you. Trade-ins or exchanges possible! Machinery purchase/sale BUY/SELL OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you wish to sell your machine? For further information or contact options, please visit our website.

Condition: excellent (used), Year of construction: 2022, operating hours: 413 h, functionality: fully functional, machine/vehicle number: 3126137, SPECIFICATION Swing over cross slide 419mm Maximum cutting diameter 305mm Maximum cutting length 305mm Spindle nose A2-5 Spindle bore 58.7mm Bar capacity 44mm Maximum spindle speed 6000rpm Spindle motor power 11.2kW Number of turret tool station 12 X axis travel 200mm Z axis travel 406mm Rapid traverse X axis 30.5m/min Rapid traverse Z axis 30.5m/min Approximate weight 2750Kg MACHINE EQUIPPED WITH: - Haas CNC Control system 3 jaw chuck 165mm diameter Parts catcher Hydrafeed Multifeed 65 Barfeed Godpjxm U Sxefx Afisbu 17 assorted tool holders, 5 of which are new and boxed Interlocked guarding Automatic lubrication system Coolant system Manual Cycle start hours 782 Feed cutting hours 413 NB Current list price new, machine £56,415.00, barfeed £12,000.00 Total £68,415.00 Special Price here at RK International

Condition: used, Year of construction: 2003, Technical details: turning diameter: 120 mm turning length: 100 mm control: Fanuc Spindle 1 power: 7,5 kW Spindle 1 RPM: 4500 1/min Spindle 2 power: 7,5 kW Spindle 2 RPM: 4500 1/min Distance between spindle noses: 600 mm Turret No.1 stations / rotary tools: 15/15 Power rotary tools turret 1: 2,7 kW RPM of rotary tools turret 1: 4000 1/min Turret No.2 stations / rotary tools: 15/15 Power rotary tools turret 2: 2,7 kW RPM of rotary tools turret 2: 4000 1/min Travel x/z turret 1: 250 / 300 mm Travel x/z turret 2: 250 / 920 mm Bar capacity spindle 1: 51 mm Bar capacity spindle 2: 51 mm Gsdpfoxlrf Tsx Afisbu power chuck: 165 mm Spindle bore sp. 1: 62 mm Spindle bore sp. 2: 62 mm dimensions of the machine ca.: 3700 x 2300 x 3000 mm weight of the machine ca.: 5600 kg Used CNC-2-spindle CNC turning and milling center with gantry loader - 2x 15 station turret -automatic gantry loader with turnaround station. 14 station-magazin right side Max. Parts size Ø 120 x 100 mm Doublegripper capacity 2 x 3 kg *

Year of construction: 2010, condition: ready for operation (used), Main Drive Number of axis 2 Workpiece Workpiece drm over bed 806 mm Workpiece drm over support 527 mm Gbedpfsxlvabex Afiou Media Chip conveyor Yes This HAAS ST-30 was manufactured in 2010. A robust horizontal turning machine featuring a swing over bed of 806 mm, maximum cutting diameter of 533 mm, and a bar capacity of 76 mm. It includes a 254 mm 3-jaw chuck, tailstock, coolant system, and chip conveyor. If you are looking to get high-quality turning capabilities, consider the HAAS ST-30 machine we have for sale. Contact us for more information. Application Types Turning

Condition: excellent (used), Year of construction: 2001, Gildemeister MF Sprint 65 Machine in excellent condition Gsdpfx Afsxm Td Teijbu Hainbuch SK65 2 x turret with live tools Low operating hours: 22,670

Condition: used, Year of construction: 2008, Technical details: Gbjdpfx Aow S Htaefiju x-travel: 2665 mm y-travel: 2440-2890 mm z-travel: 750 mm max. torque on the spindle: 4400 Nm control: Siemens 840D workpiece diameter - max.: 800 mm workpiece length - max.: 750 mm tool changer with: Scheiben-Revolver 12-fach places spindle speed:: 750 U/min tool taper: 50 voltage: 400 V Total power requirement: 92 kW Weight approx.: 30 t dimension machine xH: 7,0 x 3,1 x 4,5 m The machine has a turret with 12 tool stations (VDI 50) and a milling spindle with a tool changer for up to 96 tools. The tool magazine can be loaded during machining, which reduces setup time and allows the use of “sister” tools. The proven EMAG turret is available for turning operations on the machine. The VLC 800 MT multifunctional machining center can completely machine parts up to 800 mm in diameter in a single clamping. If necessary, a new (unused) spindle unit can be purchased as an option. (#1100673) *

Condition: ready for operation (used), Year of construction: 2010, bar material dia. 32 mm spindle passage 36 mm turning length 320 mm turning speeds 200-8000 U/min Back spindle: 32 mm turning length 600 mm Back spindle: 200 - 8000 UpM rapid speed x1 = 32 m/min rapid speed Y1+Z1+X2+Z2 = 45 m/min control Mitsubishi M70 Number of axles 5+2x C Achse 7 St. Number of working hours 119000 h spindle motor 7,5/5,5 kW weight of the machine ca. 3,5 + FMB t dimensions of the machine ca. 2,5 x 1,2 x 1,82 plus FMB m CNC Swiss-Type Lathe Citizen A32-VII (R) with FMB Turbo 3-36 3200 Var.C loading magazine. Sold due to restructuring. Machine with 7 axes (X1, Y1, Z1, X2, Z2, C1, C2) in the main spindle version on the right, vertical holder for 4 driven turning tools + 3 parting tools and + 4 drilling tools. Tool holder for the rear side with 5 stations - see sketch Figure 10. Counter (pick-off) spindle. Simultaneous machining. The machine was regularly serviced by Citizen Europe, and wear parts were last replaced in June 2025. The fire protection system was replaced in June 2025, and the bearings were replaced in June 2024. Equipment: Collet chuck for spindle + pick-off spindle / Synchronously driven guide bushing / Drive unit for guide bushing / Workpiece ejection device / Cross-machining drive unit including 4 spindles / Door lock / Pick-off spindle / Parts receiving basket + conveyor belt / Pneumatic unit for air sealing / Interior work light / 3-color warning lights / Parting tool breakage detection / COMBISTREAM high-pressure coolant system + chip conveyor, 8 outlets, 130 bar / 4-way driven tool for back machining / "Long parts" option 600 mm with parts container, guide tube, and spindle nut / Loading magazine with various material guides (7, 12, 20, 36), adapters, telescopic tubes and inserts / CO2 fire extinguishing system with FB 703 drilling system control system Godpfx Asxlkwusfiebu including flame and thermal maximum detector Manual release. Features of the CINCOM SYSTEM M70PLC CNC control system: • Multi-axis CNC system for simultaneous or individual machining / • Cutting radius compensation / • Multiple cycle repetitions / • Deep hole drilling cycle / • Constant cutting speed / • Chamfer and radii insertion / • Constant cutting speed of the pick-up spindle / • Thread chamfering on the pick-up spindle • Main spindle C-axis • Pick-up spindle C-axis • Main and pick-up spindle synchronization / • Synchronous tapping on the main and pick-up spindles as well as with the driven tools / • Synchronous thread cutting on the main and pick-up spindles / • Geometric function / • Collision detection / • 8.4" color liquid crystal display (LCD) /

Year of construction: 2020, condition: ready for operation (used), General Data Machine weight 4944 kg Control Unit Brand HAAS Main Drive Spindle speed range 3400 rpm Spindle motor power 22.4 kW Number of axis 2 Movement X-Axis Movement 239 mm Godpfxoxlu Uds Afijbu X-Axis Rapid Traverse 24 m/min Z-Axis Movement 826 mm Z-Axis Rapid Traverse 24 m/min This HAAS ST-30 was manufactured in 2020. A robust horizontal turning machine featuring a chuck size of 254 mm, max cutting diameter of 381 mm, and bar capacity of 76 mm. It supports a spindle speed up to 3400 rpm with a power of 22.4 kW. Ideal for precise and efficient turning operations. Contact us for more information about this machine. Application Types Turning

Year of construction: 2001, condition: ready for operation (used), General Data Machine weight 2500 Control Unit Brand INDEX Gbodexlu Uwepfx Afiju Model C 200-4 Main Drive Spindle speed range 6000 Number of axis 2 Movement X-Axis Movement 90 mm Z-Axis Movement 280 mm This Index ABC was manufactured in 2001. A reliable horizontal turning machine, it offers consistent performance for precision tasks. Consider the opportunity to buy this Index ABC horizontal turning machine. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2015, General Data Measurements width 1440 Measurements depth 2730 x x Measurements height 1620 mm Machine weight 4200 kg Gbedpfx Aswz Sqkjfiju Control Unit Brand SIEMENS Model 840D-SolutionLine Main Drive Spindle speed range 4500 Spindle motor power 11 kW/ 16.5 kW Number of axis 2 Movement X-Axis Movement 230 mm X-Axis Rapid Traverse 15 m/min Z-Axis Movement 740 mm Z-Axis Rapid Traverse 24 m/min Workpiece Workpiece drm over bed 425 mm Turret Number of turrets 1 Tool taper DIN 69880/30 mm Tail Stock Pinol diameter 80 mm Tools Number of station 12 Media Oil tank 30 liters Additional Equipment Full splash guard cladding + coolant unit Work area light + pneumatic equipment Panoramic window for optimum visibility into the work area This 2-axis SPINNER TC 600-65MC horizontal turning machine was manufactured in 2015, featuring a Siemens 840D control system and a 16-position indexing turret. It includes a main spindle with a speed of up to 4,000 rpm and a power of 24 kW. The machine offers a swing diameter over bed of 425 mm and a maximum turning diameter of 310 mm. Consider the opportunity to buy this SPINNER TC 600-65MC horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Year of construction: 2009, operating hours: 9 h, condition: ready for operation (used), Additional Equipment Tailstock spindle diameter: 100mm / Tailstock spindle travel: 200mm / Internal taper of the tailstock spindle: Mk.5 This horizontal turning machine was manufactured in 2009. A Weiler E 60x1000, it features a spindle bore of 83mm and a swing diameter over bed of 640mm. With a maximum torque of 1400Nm and a speed range up to 2500 rpm, it's ideal for robust turning operations. Recently overhauled, it includes renewed bearings and guideways, ensuring high precision. Consider the opportunity to buy this Weiler E 60x1000 horizontal turning machine. Contact us for more information about this machine. Gbodpfxsxlvc Ae Afiou Application Types Turning

Condition: ready for operation (used), Year of construction: 2016, operating hours: 18,071 h, General Data Machine weight 6000 kg Main Drive Number of axis 3 Media Main electronic connection 40 kVA Additional Equipment Gbodpfxexlvc Ns Afisu shopturn option This 3-axis DMG MORI Gildemeister CTV 250 2nd was manufactured in 2016. Ideal for precision vertical turning, this machine maintains robust construction and reliability. If you are looking to get high-quality turning capabilities, consider the DMG MORI Gildemeister CTV 250 2nd machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 2015, operating hours: 7,200 h, condition: ready for operation (used), Control Unit Brand FANUC Main Drive Spindle speed range 2000 Number of axis 2 Movement X-Axis Movement 352 mm Gsdpfx Ajxlvbrefijbu Z-Axis Movement 1105 mm This DOOSAN PUMA 4100B was manufactured in 2015. A robust horizontal turning machine featuring a Fanuc 32i CNC system, it offers a maximum turning diameter of 550 mm and a length of 1,042 mm. Equipped with a 10-station turret and a chip conveyor, it's ideal for efficient machining with 7,200 hours of operation. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA 4100B machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 2009, condition: ready for operation (used), General Data Gbsdpfxexirhvj Afiju Measurements width 1879,6 mm Measurements depth 2743.2 mm Measurements height 1905 mm Machine weight 11000 kg Control Unit Brand MAZATROL Main Drive Spindle speed range 4000 RPM Spindle motor power 35 HP Spindle bore 76.2 mm Number of axis 2 Movement X-Axis Movement 177,8 mm Z-Axis Movement 558,8 mm Workpiece Workpiece drm over bed 6731 mm Turret Number of turrets 1 Tools Number of station 12 This Mazak QTN 250-II was manufactured in 2009. A robust horizontal turning machine, it offers reliable performance for precision machining. Ideal for those looking to enhance their machining capabilities with a proven model. Contact us for more information. Application Types Turning

Year of construction: 2008, condition: ready for operation (used), Control Unit Brand HEIDENHAIN Model CTX 420 Main Drive Number of axis 3 Additional Equipment Chip conveyor Oil mist separator via mechanical industrial filter, 1500 m³/h Package bar processing G Signal light 4-color Hollow clamping device, Ø 68 mm Lifting beam included This Gildemeister CTX 420 linear was manufactured in 2008. A robust horizontal turning machine featuring HEIDENHAIN Plus iT CNC control, tool drive, C-axis, Y-axis, and a chip conveyor. It includes a tailstock and a tool measuring device. The tool turret was completely overhauled this year. Consider the opportunity to buy this Gildemeister CTX 420 linear horizontal turning machine. Contact us for more information about this machine. Application Types Gsdpexllkiefx Afiebu Turning

Year of construction: 2005, operating hours: 6,235 h, condition: ready for operation (used), General Data Measurements width 2200 mm Measurements depth 4100 mm Machine weight 11600 kg Control Unit Brand FANUC Model 18i-TB Main Drive Spindle speed range 5000 Gbjdpfjxllpxex Afisu Spindle motor power 22 kW Number of axis 3 Movement X-Axis Movement 255 mm X-Axis Rapid Traverse 20000 mm/min Y-Axis Movement 120 mm Y-Axis Rapid Traverse 7500 mm/min Z-Axis Movement 800 mm Z-Axis Rapid Traverse 24000 mm/min C-Axis Movement 360° Workpiece Workpiece weight 120 kg Turret Number of turrets 2 Tools Number of station 12 Media Chip conveyor Yes Additional Equipment Measuring Probe: Tool Measuring Probe Automatic Bar Loader: ILS-RBK10016 L 2265 mm, W 1116 mm, Approx. 490 kg Bar Loader Max. Material Length/Diameter: 1600 mm/5-65 mm Magazine Short Bar Feed with Servo Drive Main and Counter Spindle with Power Chuck D = 250 Enclosed Work Area Enclosure According to Accident Prevention Regulations Memory Card Input Socket, RS 232 Socket Tool Load Monitoring, Bed Flushing Workpiece Air Blow-off Function Automatic Tool Measuring Probe // Driven Tools on Both Revolvers This 3-axis DAEWOO PUMA TT 2000 SY was manufactured in 2005. It features a turning diameter over bed of 800 mm and a maximum bar diameter of 65 mm. Equipped with a Fanuc 18i-TB control system, it offers spindle speeds up to 5000 rpm and includes a tool turret with 12 stations. Consider the opportunity to buy this DAEWOO PUMA TT 2000 SY horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Year of construction: 2008, condition: ready for operation (used), General Data Gbodpfxjxllmwj Afiou Measurements width 3000 mm Measurements depth 1200 mm Measurements height 2000 mm Control Unit Brand FAGOR Main Drive Spindle speed range 1400 Number of axis 2 This Geminis GTH 6 G2-1300 x 3000 was manufactured in 2008. A robust horizontal turning machine featuring a FAGOR 8055 TC control system, 37 kW spindle motor, and a maximum turning diameter of 1300 mm. It supports a turning length and center-to-center distance of 3000 mm, with spindle speeds up to 1400 U/min. Includes a chip conveyor. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2021, Main Drive Number of spindles 2 Gbedpfjxlllmex Afisu Spindle speed range 6500 Spindle bore 34 mm Number of axis 9 This 9-axis Hanwha XDI32-N was manufactured in 2021, featuring a dual spindle system with a maximum speed of 6,500 rpm and power of 2.2/5.5 kW each. It supports a maximum work diameter of 32 mm and includes a 315-liter cooling tank. Ideal for precision Swiss-type turning, this machine ensures efficient and reliable performance. If you are looking to get high-quality turning capabilities, consider the Hanwha XDI32-N machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 2005, condition: ready for operation (used), Main Drive Spindle speed range 6000 Number of axis 6 Movement X-Axis Movement 260 mm Z-Axis Movement 590 mm Gbedpfx Afsxlllgsiju This 6-axis MORI SEIKI NL2000SY/500 was manufactured in 2005, featuring X-axis travel of 260 mm, Z-axis travel of 590 mm, spindle power of 5.5 kW, and a spindle speed of 6,000 rpm. It includes a 12-position tool turret. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI NL2000SY/500 machine we have for tact us for more information. Application Types Turning

Year of construction: 2018, condition: ready for operation (used), Control Unit Brand FANUC Model 0i-TC Main Drive Spindle speed range 3500 Spindle bore 86 mm Number of axis 2 Movement X-Axis Movement 255 mm X-Axis Rapid Traverse 16 m/min Z-Axis Movement 800 mm Z-Axis Rapid Traverse 20 m/min Tail Stock Pinol diameter 110 mm Pinol tool taper MT5 Tools Gbsdpjxllmqofx Afieu Number of station 12 This Takisawa LA-300 CNC was manufactured in 2018. A robust horizontal turning machine featuring a spindle speed of 3,500 rpm, maximum turning diameter of 450 mm, and a 12-position tool turret. It includes a FANUC Series 0i-TC control for precise operations. If you are looking to get high-quality turning capabilities, consider the Takisawa LA-300 machine we have for sale. Contact us for further details regarding this machine. Application Types Turning