Used Varnish Flex for sale (3,796)

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, machine/vehicle number: 11508, control type: PLC-controlled, degree of automation: automatic, actuation type: electric, controller manufacturer: Flexa, roller length: 1,650 mm, working width: 1,650 mm, overall weight: 370 kg, power: 1.5 kW (2.04 HP), input voltage: 230 V, input frequency: 50 Hz, number of digital displays: 1, Equipment: CE marking, documentation/manual, emergency stop, The Flexa Miura Plus is a professional automatic XY cutter designed for trimming paper, vinyl, wallpaper, foils, banners, and other roll-fed media up to 1650 mm wide. The machine is PLC-controlled with a touchscreen interface, offering fast setup and precise cutting for industrial and print finishing environments. This unit has been upgraded with 5 sensors, allowing operators to configure settings for five different substrates and switch between them quickly without lengthy adjustments. Powered by an electric drive system, it ensures smooth handling, reliable operation, and consistent results. The Miura Plus is also ideal for cutting two parallel tiles simultaneously, making it a perfect fit for poster, wallpaper production and large-format finishing. We will also include 16 spare blades free of charge. Ljdpfx Aexbfzteffeak Located in Riga, Latvia, the Miura Plus is a robust and efficient solution for businesses looking to increase productivity and versatility in their finishing workflow.

Condition: like new (used), Year of construction: 2024, operating hours: 200 h, functionality: fully functional, machine/vehicle number: 159422, Verderflex Dura 35 peristaltic pump, serial number: 159422, MFG: 2024 For demanding applications, the Verderflex Dura 35 provides: Maximum flow rate: 5,292 L/hr Maximum pressure: 16 bar Maximum medium temperature: 80 ºC Compressible solid size: 8.75 mm Suction lift: 9.5 mWc Certification: ATEX, FDA and EC/1935 Pump Housing made from cast iron (GG25) Front Cover made from carbon steel with plexiglass inspection window Rotor made from cast iron (GG25) Laedpswdtbcofx Affok Drive Shaft EN24T Steel Mounting Frame made from carbon steel Torque Arm made from carbon steel Bearing made from bearing steel Flow 11/hr Pump speed 35 PM Installed motor power 25W Max turndown at 5 Bar discharge pressure 101 Verderflex peristaltic pumps are the ideal low cost life cycle solution for the transfer and dosing of difficult to pump fluids such as viscous, abrasive or high solid content liquids such as slurry and sludge. Sizes range from small models such as OEM pump modules, precision and industrial style tube pumps to the world's largest hose pumps, used in the most demanding applications. These include water treatment, biotechnology, food & drink production, mineral processing and chemical manufacturing. Features : • Peristaltic pumps are excellent problem solving pumps and offer the following benefits: • Abrasion Resistant • No moving parts in the liquid stream • Accurate Dosing • Self Priming • Can pump liquids containing up to 80% • inorganic solids (fines) • Aseptic pumping • smooth liquid passage • Easy and completely cleanable without disassembly • Suitable for handling shear sensitive products • Can run dry • Low cost of ownership • High suction capability of up to • 95% vacuum or a 9.5 mWc • No seals • Reversible rotation, empties line or blockages • Can pump • abrasive, very viscous or • high density fluids Application for abrasive fluids : Lime mixing, Kieselguhr, circulation and dosing Application for corrosive fluids : Ferric Chloride, Copper Sulphate and similar Activators, process chemicals, Acids, including Alkalis Application for shear sensitive fluids : Coagulants, Flocculants and bacterial remediation treatments Application for mining industry : Dosing Process Reagents, Thickener Underflow, polymers and slurry transfer Application for water treatment : Dosing Lime, Hypochlorite, Silicate, Polymer, Ferric Chloride, sludge transfer and filter press feeds Application for chemical Industry : Corrosive Acids, Bases and Hydrocarbons Application for Printing and packaging : Inks (including water based inks), Paints, Dyes and Glue Application for Battery Filling, Chemical Cleaning, Equipment Sterilising, Seed Coating : Biocides, Hydrogen Peroxide, Sodium Hypochlorite, Caustic Soda Application for Laboratory Systems : Biological Broths to polluted streams Application for Agriculture : Feed Additives, Animal Vaccines and Waste Transfer Application for Paper and Pulp : Pulp and Dyes Food and Beverage : Breweries, Diatomaceous Earth, wineries, dairies, sugar refining, abattoirs The pump is in excellent condition, like new. Price Euro 4.500 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, 🧰 Product Features • Manufacturer: Palflex • Condition: Used • Colour: Orange • Height: 400 cm • Depth: 110 cm • Bay Load: 24,000 kg • Beam Length: 410 cm • Beam Load Capacity: 3,000 kg per level Offer includes: • 11 pre-assembled frames, depth 110 cm, height 4 m • 40 beams, length 4.1 m, 3,000 kg load capacity per bay Laodpfx Afevfnqvefek • 80 locking pins • 44 concrete anchors • 1 load capacity sign per row Used upright protectors available immediately, surcharge per unit €15 net! Further accessories can be found in the accessories catalogue. 💰 Price €2,080 net excl. VAT • Quantity discount: upon request • Shipping costs: Europe-wide upon request • Delivery time: Immediately available • Inspection and collection: possible any time by appointment Over 5000 linear metres of pallet racking from numerous manufacturers always in stock (Subject to changes and errors in the technical data, information, and prices as well as prior sale! See our Terms & Conditions. All prices excl. VAT ex-warehouse.)

Condition: used, Hydr. flat form scissor lift table FLEXLIFT FLUNDER type 1500 / 100 (without hydraulic unit) Year of manufacture 1991 Lasdsl Nbqcopfx Affjk Nominal lifting capacity 1500 kg Lifting capacity (practically tested) 1000 kg (at approx. 350 bar) platform size 2100 x 1400 mm stroke max. 930 mm Overall height - bottom 100 mm (with mounting frame) Overall height - top 1030 mm Hydr. operating pressure 350 bar = lifting force 1000 kg Motor power of hydraulics 1,5 kW mains connection 400 Volt, 50 Hz - mechanical-hydraulic safety limit switches stop the lowering process when the safety bar is actuated - without hydraulic power unit - without electric control length of installation frame 2270 mm width of mounting frame 1580 mm height of mounting frame = height at bottom 100 mm dead weight of lifting table 500 kg good condition

Condition: good (used), Year of construction: 2021, Offered Equipment • Manufacturer / Model: AV Flexologic COSMOLINE 900 • Year of manufacture: 2021 • Serial no.: 051121-1059 • Condition: Excellent – the machine was in active use up to the company closure and can still be inspected under power. Why choose the COSMOLINE 900? The COSMOLINE 900 is an inline washout and drying system for photopolymer plates. It is engineered to simplify and accelerate plate processing while delivering consistent, high-quality results. ✅ Fully automated inline operation – the operator loads a plate, and the machine automatically transports, washes, and dries it. ✅ Superior cleaning – robust water jet with soap mixture, multiple adjustable rotating brushes, plus a large counter-rotating brush for maximum cleaning coverage. ✅ Reliable finishing – an additional brush for removing residues; hot air drying leaves plates clean and ready for immediate use. ✅ High productivity – sensors measure plate dimensions for optimized processing, ensuring stable and repeatable results. ✅ Environmentally friendly – standard centrifugal cleaning system; optional membrane filter available to separate polymer from water. ✅ Flexible & customizable – machine settings can be adapted to individual production requirements. This system is ideal for label and packaging converters seeking dependable, spotless, and perfectly finished flexographic plates with minimal operator effort. Lajdpjw Tc Upsfx Affok Technical Specifications • Maximum plate width: 900 mm • Maximum plate height: 1,200 mm • Standard centrifugal cleaning system (sustainable solution) • Optional membrane filter for polymer recovery (not required for letterpress plates)

Condition: repair required (used), bore capacity in steel diameter / mm arm length 1000 mm Lasdpfx Asvmtlhoffok workpiece height max / mm - throat (max) 1000 mm - sleeve stroke 250 mm MILLING SPINDLE / HEAD / - spindle revolutions (min) 47.5 /min - spindle revolutions (max) 2120 /min - spindle diameter 60 mm - space requirements -left/right- 2000 mm - space requirements -front/back- 750 mm - total height 2160 mm - total weight approx. 2500 kg Machine is not 100% OK, and needs an overhaul. - Height adjustment and cross adjustment must be repaired

Condition: good (used), Year of construction: 2011, product width (max.): 1,250 mm, working width: 1,200 mm, 8 color Printing Width (max): 1250 mm Web Width (max): 1200 mm Printing Repeat: from 370 mm to 850 mm Mechanical Speed (max): 300 m/min Substrate Types: plastic films (LDPE, HDPE, PET, BOPP), paper, aluminum foil Unwinder/Rewinder Diameter: up to 1000 mm Inking & Doctor Blade System Lodpjw Adz Refx Affeak Drying System Web Guiding and Tension Control Automatic web guide at unwinder Electronic tension control on unwind and rewind units Register Control Automatic longitudinal and transversal register adjustment Job memory for repeat orders Reel Handling Shaftless unwinder and rewinder Integrated lift for easy roll handling Control Panel Centralized touchscreen HMI PLC with diagnostic and job recall functions Suitable for: Flexible packaging (food and non-food) Laminates and labels Film for industrial use Paper and foil printing Material Thickness: 12 – 150 μm

Year of construction: 2005, condition: ready for operation (used), Table dimensions: 4000x2000mm, connected load: 11kW. Lajdpfx Afefdr Iiefok

Year of construction: 2001, condition: ready for operation (used), Built in 2001 Belt width 400 mm Equipment • drying tower upward • infeed left at the bottom Lasdpfx Afod Idlasfjk • outfeed 90° at the top

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: F.24442.03.03, Unique opportunity for serial manufacturers We are offering you here an immediately available, top thermoforming linear system with automatic tool change, rotary table, powerful lower table with spindle drive, tool change station, maintenance platform, hotmelt extraction, heating enclosure, and many other special functions directly from the manufacturer FRIMO. The system was most recently used for the production of automotive door panels. The film itself was coated with hotmelt. The system can also be used for dispersion adhesives (adhesive on the carrier parts). Very large components are possible, forming area up to 800 x 2,000 mm. The maximum forming part height is 250 mm. Very fast cycle times of under 60 seconds are easily possible. Lasdpfx Aewpd Rrjffsk The system was regularly maintained and was in operation up to its dismantling. Currently, the system is properly stored at our facility in Hungary. We have locations worldwide and can assist you directly at your site. We can deliver this system worldwide as needed, install it at your factory, train your personnel, and advise you in all technical matters. Any modifications and modernization are also possible. Just ask us with your individual project request!

Year of construction: 2002, condition: like new (used), Available immediately! Reel width 340 mm Reel diameter unwind 762 mm Reel diameter re-wind 610 mm Core diameters 25,40,50,76 mm Speed up to 200 meter per minute Slitting method disc knifes V – 240 A – 38 Ledpfx Aoidl T Aeffjak Pressed air – 6bar

Condition: excellent (used), Compensator, damper, expansion compensator, expansion piece, axial compensators, stainless steel compensator, steel expansion compensator, steel expansion joint -Manufacturer: Wellflex, compensator unused -Type: PN 2.5 DN 250 -Nominal diameter: DN 250 Ø 273 mm / length 285 -Material: Bellows stainless steel -Bolt circle: Ø 335 / 18 mm -Number: 4x dampers available -Price: per piece -Dimensions: Ø 375 x 280 mm Lodpjip Rcyofx Affjak -Weight: 18.1 kg/piece

Condition: used, Year of construction: 2003, Number of inking units 8 Max. printing width 900 mm Max. material width 950 mm Min. printing length 280 – 650 mm Max. mechanical machine speed 250 m/min Ledpfx Afjw Hryvsfeak Material to print: PE, OPP, Paper Repeat of design, 280 mm - 650 mm printing sleeves for 1.14. plates (more the 150 sleeves) printing sleeves for 2.54 plates (approx 50 cylinders) corona, slit, automatic winders quick sleeve and anilox change system Two edge guides Ink pumps Doctor blade system camera system

Condition: ready for operation (used), Year of construction: 2012, Two AmbaFlex spiral conveyors are available. 1) Height: 3100mm, infeed height: 1400mm, slat width: 400mm. 2) Height: 2650mm, inlet height range: 600mm-800mm, slat width: 400mm, defects: Torque support motor and missing foot disk. Can be repaired as required before sale. Documentation available. On-site inspection is possible. Lajdpeu T Rh Uefx Affek

Condition: used, Year of construction: 2015, Overview The machine built in 2015 by Lithuanian manufacturer FlexBlow. The machine has been overhauled and new dumper, hopper and unscrambler will be built. The machine is already disassembled. Please note that the picture of the advertisement is for reference only.  Techn. Details  Capacity: 5.500 bph (at 1,0l)  Number of cavities: 4  Max. bottle neck: 48 mm Max. bottle size: 2,0l  Previously used neck size: 38 mm  Spare parts, blow molds and new set of neck specific parts can be purchased additionally Siemens controller and English operational language Laodpfx Afol Hx H Eofjk

Year of construction: 2018, condition: as good as new (ex-display), Technical Specifications • Space-saving fixed table - moving gantry design for small machine footprint • Single structure welded, stress relieved and machined all-steel base frame, gantry and gantry feet • Steel structures are reinforced with heavy ribs to resist flex and dampen vibrations • Each machine design is efficiently optimized and validated by using Finite Element Analysis (FEA) to ensure quality, performance, and safety • Open machine bed for easy loading and unloading by forklift or overhead crane • High preload profiled linear bearings with cover strips on all axis • Brushless digital A/C servo drives and motors on all axis • Dual side drive and synchronized X-axis; no twist under load like applicable to a single center-mounted ball screw or cantilevered design • Rack and pinion drive system on X and Y axis • High precision ball screw on Z axis (anchored at both ends) • Low-backlash planetary gear boxes • Fully closed cable carriers prevent the cables from damage by chips and fine dust • High quality, shielded cables for energy chains are a guarantee of reliability • Work area X axis 3,050 mm • Work area Y axis 1,550 mm • Z-axis clearance 200 mm • Z-axis travel 280 mm • Maximum feed rate 80 m/min • Network connection via Ethernet • Remote Administration via Internet • Dimensions approx. 3,460 x 2,460 x 1,930 mm (L x W x H, without safety devices) • Weight approx. 3,500 Kg CNC Control System • Siemens Sinumerik 808D Advanced Lasdeflpmdjpfx Affjk • Color LCD display • IP65 protection for CNC front panel and machine control panel • Preassigned keys for common functions, such as handwheel selection, tool change, coolant control or program testing • 7-segment display for tool number • Spindle control with spindle override (rotary switch with 15 positions) and feedrate / rapid traverse Portable MPG with handwheel, axis selector and resolution switch, E-stop button • Fast data transmission via USB stick (on the operator panel front) and high-speed Ethernet Interface Servo Motors and Drives • Siemens Sinumerik Digital Field Bus • Siemens SINAMICS V70 servo drives • Siemens SIMOTICS S-1FL6 servo motors • Siemens pre-assembled MOTION-CONNECT cables Automatic Tool Change Spindle • Spindle power 8 KW (S1) / 10 KW (S6) • Maximum speed 24,000 RPM (software controlled) • Ceramic bearings • Electric fan for cooling • Toolholder ISO-30 • Max. 26 mm (1 1/4") tool diameter with ER-40 tool holders • Temperature sensor • Safety interlock for tool in spindle • Air pressure sensor Dust Collector for Automatic Tool Change Spindle • Hose diameter 120 mm • Manual height adjustment • Pneumatic operation Tool Magazine • Linear tool rack, mounted outside of work area at the backside of the machine • Maximum 12 tool positions possible • 4 fool holders ISO30 / ER32 are included 6 Zone Vacuum Table • Phenolic work surface (thickness 25 mm) with grid • Zones individually valved High pressure vacuum pump according to customer requirements Precision Tool Length Sensor CE Package Delivery, commissioning & training as per requirements

Condition: used, Light barrier, safety light curtain, switching part, control unit, control box -Manufacturer: Leuze lumiflex, switching part control unit ULS-5 -Voltage: 230V -Quantity: 1x switching part available Laodpfx Aep Hiy Eoffsk -Dimensions: 250/120/H80 mm -Weight: 2.5 kg

Condition: ready for operation (used), Year of construction: 1990, An Enflex automatic packaging machine for powdery and granular products for the production of pouches from heat-sealable wrapping materials with three or four-sided sealing is available. Dosing capacity min./max.: 5cm³/50cm³, min. bag width: 50mm, min. bag height: 50mm, max. bag width (single bag): 65mm+65mm, max. bag width (with perforation): 70+mm, max. bag height: 150mm, packaging capacity range: 150-18000 bags/h. Wrapping material (all heat-sealable wrapping materials): Polyethylene opaline, cellophane, polyester, organic polypropylene, etc. Machine dimensions X/Y/Z: approx. 5000mm/1100mm/2100mm, weight: approx. 1100kg. Documentation available. On-site inspection is possible. Ljdpfx Aewa A Ttoffsak

Condition: good (used), Rubber disc coupling, claw coupling, connecting coupling, torsionally flexible coupling -Manufacturer: Stromag-Periflex Lajdpfx Afsdfi Dajfok -Type: PS 34-2 -V.-No.: 467/1 -Ident No.: 699070500 -Outer diameter: 337 mm -Inside diameter: 103 mm -Pitch circle outside: 315 mm -Hole circle inside: 138 mm -Number: 6x clutch discs available -Price: per piece -Dimensions: 337/337/H41 mm -Weight: 2.5 kg

Condition: excellent (used), roller chain, drive chain -per package: Length: 5 m -Size reinforced: 16B-1 1-way 1" x 17.02 -Quantity: 23 x pieces packages available -Price: per package -Package weight: 14 kg/piece Laodpfx Aeb A Niqoffok

Condition: used, Light barrier, safety light curtain, switching part, control unit, control box -Manufacturer: Leuze lumiflex, switching part control unit Basis-270 Lajdpfjp Hiyzox Affok -Voltage: 90-264Vac / 22W, 47-63Hz -Quantity: 4x switching part available -Price per piece -Dimensions: 260/210/H90 mm -Weight: 3.4 kg/pc.

Condition: excellent (used), Vibration damper, compensator, damper, expansion compensator, expansion piece -Manufacturer: Sternflex, steel expansion compensator type SA-10 unused -Size: DN 50 PN 16 -Machines: for noise dampening and absorption of small vibrations -Material: stainless steel 1.4541 -Number: 28x dampers available -Price: per piece Lasdeigrv Nspfx Affek -Dimensions: Ø 79 x 206 mm -Weight: 0.9 kg/piece

Condition: excellent (used), Vibration damper, compensator, damper, expansion compensator, expansion piece -Manufacturer: Sternflex, steel expansion compensator type SA-10 unused Lajdpfx Ajigrwbeffek -Size: DN 32 PN 16 -Machines: for noise dampening and absorption of small vibrations -Material: stainless steel 1.4541 -Number: 13x dampers available -Price: per piece -Dimensions: Ø 53 x186 mm -Weight: 0.5 kg/piece

Condition: used, Roof window shutters, blinds, roller shutter curtains Ljdpod R Ak Usfx Affjak -electric: blinds -Width: 1140 mm -Height. 3100 mm -DIN: EN 13659 -Drive: somfy J406 HTM -External dimensions: 1380/300/H180 mm -Weight: 12 kg

Condition: used, Metal bellows coupling, claw coupling, connecting coupling, rotary encoder coupling, encoder coupling Lsdpfx Afscqudbjfoak -Manufacturer: Paguflex -Type: G30 (10 pieces available) -Outer diameter: 46 mm -Inside diameter: 12 mm -Price piece: 18 EUR net -Weight: 0.07 kg