Used Underground Cables for sale (3,954)

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 7525SE-0949-FA, measuring range X-axis: 2,600 mm, number of axes: 7, TECHNICAL DETAILS Axes: 7 Measuring range: 2.6 m Accuracy Acceptance temperature: 20 °C Humidity during acceptance: 50 % Permissible single-point deviation: 0.028 mm Determined single-point deviation: 0.010 mm Maximum permissible volumetric length measuring deviation: ± 0.039 mm Determined volumetric length measuring deviation: -0.018 mm Scanner Manufacturer: Hexagon Model: CMS108 Integration: Calibrated within the measuring arm Note: Can be used on the measuring arm with appropriate scanning software Note: Scanning software not included in the scope of delivery MACHINE DETAILS Design: Portable measuring system Weight of measuring system including transport case: approx. 40 kg External dimensions of transport case for measuring arm: approx. 1,350 x 550 x 350 mm Dimensions of tripod: approx. 750 x 750 x 750 mm Weight of tripod: approx. 75 kg Dimensions of scanner case: approx. 600 x 450 x 220 mm Weight of scanner including carrying case: approx. 6 kg Notebook size: 17 inches Note: The measuring arm was relabeled before the last calibration. EQUIPMENT - Hexagon ROMER Absolute Arm RA-7525SE measuring arm, 7-axis - Mobility Pack FP2-1503-FA with wireless computer connection - Transport case for measuring arm - Magnetic base - Test bar, length 700 mm - Test sphere, diameter 25 mm - Probe box with 3 probes - Probe with ruby ball, diameter 6 mm - Probe with ruby ball, diameter 3 mm - Calibration sphere, diameter 15 mm - Dust cover Dedpfxezv Rhus Albskt - Complete cable set - Calibration certificate for measuring arm, notebook Dell M6600 - PowerInspect 11 software including hardware dongle - Hexagon RDS software - Brunson 231 roll stand, height-adjustable - Height adjustment range of tripod: approx. 700 to 1,100 mm - Scanner Hexagon CMS108 - Carrying case for scanner - Calibration certificate for scanner Note: PowerInspect 11 is exclusively for tactile measurements and cannot be linked with a scanner. Note for packaging request: €250 for special pallet with cardboard construction and tripod on a Euro pallet.

Year of construction: 2026, condition: new, functionality: fully functional, power: 135 kW (183.55 HP), load capacity: 800 kg, MIZAR PRP Series - Copper Wire Granulator & Cable Recycling Plant Turnkey Solution for Maximum Copper Recovery (99% Purity) The MIZAR PRP Series is a fully automatic cable recycling line designed to process complex, mixed, and contaminated cables into high-purity copper and plastic granules. Built for 24/7 industrial use, it ensures fast ROI, low operational costs, and maximum efficiency. 7-STEP PRECISION SEPARATION (100% Dry Process) • Shredder (SSH): Pre-shredding for bulky cables. • Magnetic Separator (OMS): Ferrous metal extraction. • Granulator (FGR): Fine size reduction. • Zigzag Separator (ZZS): Air separation of light fractions. • Turbo Mill (TRM): Ultra-fine grinding for complex wires. • Densimetric Separator (DES): Density-based final pure copper separation. • Dust Collector (DTF): Clean, eco-friendly operation. PROCESSED MATERIALS Twin & earth, flexible, telecom (Cat 5/6), complex automotive harnesses, underground, coaxial, and mixed WEEE cables. MODEL RANGE & TECHNICAL SPECS (Select the ideal capacity for your facility) • PRP S1: Up to 400 kg/h | Total Power: 80 kW | Footprint: 50 m² • PRP M1: Up to 800 kg/h | Total Power: 135 kW | Footprint: 100 m² Dkedpfoyy Rktox Albot • PRP L1: Up to 1300 kg/h | Total Power: 200 kW | Footprint: 120 m² • PRP XL1: Up to 2000 kg/h | Total Power: 300 kW | Footprint: 140 m² CORE ADVANTAGES • Up to 99% copper purity • Smart PLC automation with continuous feeding • Vibration-optimized, heavy-duty chassis • CE, ISO 9001, 14001, 45001, 27001 certified Need a tailored solution? Contact us for a customized layout, technical drawings, or send your material for a performance test. Mizar Recycling Machinery

Year of construction: 2026, condition: new, functionality: fully functional, power: 80 kW (108.77 HP), load capacity: 400 kg, MIZAR PRP Series - Copper Wire Granulator & Cable Recycling Plant Turnkey Solution for Maximum Copper Recovery (99% Purity) The MIZAR PRP Series is a fully automatic cable recycling line designed to process complex, mixed, and contaminated cables into high-purity copper and plastic granules. Built for 24/7 industrial use, it ensures fast ROI, low operational costs, and maximum efficiency. 7-STEP PRECISION SEPARATION (100% Dry Process) Dksdpfx Aljyy Ricjbet • Shredder (SSH): Pre-shredding for bulky cables. • Magnetic Separator (OMS): Ferrous metal extraction. • Granulator (FGR): Fine size reduction. • Zigzag Separator (ZZS): Air separation of light fractions. • Turbo Mill (TRM): Ultra-fine grinding for complex wires. • Densimetric Separator (DES): Density-based final pure copper separation. • Dust Collector (DTF): Clean, eco-friendly operation. PROCESSED MATERIALS Twin & earth, flexible, telecom (Cat 5/6), complex automotive harnesses, underground, coaxial, and mixed WEEE cables. MODEL RANGE & TECHNICAL SPECS (Select the ideal capacity for your facility) • PRP S1: Up to 400 kg/h | Total Power: 80 kW | Footprint: 50 m² • PRP M1: Up to 800 kg/h | Total Power: 135 kW | Footprint: 100 m² • PRP L1: Up to 1300 kg/h | Total Power: 200 kW | Footprint: 120 m² • PRP XL1: Up to 2000 kg/h | Total Power: 300 kW | Footprint: 140 m² CORE ADVANTAGES • Up to 99% copper purity • Smart PLC automation with continuous feeding • Vibration-optimized, heavy-duty chassis • CE, ISO 9001, 14001, 45001, 27001 certified Need a tailored solution? Contact us for a customized layout, technical drawings, or send your material for a performance test. Mizar Recycling Machinery

Year of construction: 2026, condition: new, functionality: fully functional, power: 300 kW (407.89 HP), load capacity: 2,000 kg, MIZAR PRP Series - Copper Wire Granulator & Cable Recycling Plant Turnkey Solution for Maximum Copper Recovery (99% Purity) The MIZAR PRP Series is a fully automatic cable recycling line designed to process complex, mixed, and contaminated cables into high-purity copper and plastic granules. Built for 24/7 industrial use, it ensures fast ROI, low operational costs, and maximum efficiency. 7-STEP PRECISION SEPARATION (100% Dry Process) • Shredder (SSH): Pre-shredding for bulky cables. • Magnetic Separator (OMS): Ferrous metal extraction. • Granulator (FGR): Fine size reduction. • Zigzag Separator (ZZS): Air separation of light fractions. Dedpfxsyy Rk To Albskt • Turbo Mill (TRM): Ultra-fine grinding for complex wires. • Densimetric Separator (DES): Density-based final pure copper separation. • Dust Collector (DTF): Clean, eco-friendly operation. PROCESSED MATERIALS Twin & earth, flexible, telecom (Cat 5/6), complex automotive harnesses, underground, coaxial, and mixed WEEE cables. MODEL RANGE & TECHNICAL SPECS (Select the ideal capacity for your facility) • PRP S1: Up to 400 kg/h | Total Power: 80 kW | Footprint: 50 m² • PRP M1: Up to 800 kg/h | Total Power: 135 kW | Footprint: 100 m² • PRP L1: Up to 1300 kg/h | Total Power: 200 kW | Footprint: 120 m² • PRP XL1: Up to 2000 kg/h | Total Power: 300 kW | Footprint: 140 m² CORE ADVANTAGES • Up to 99% copper purity • Smart PLC automation with continuous feeding • Vibration-optimized, heavy-duty chassis • CE, ISO 9001, 14001, 45001, 27001 certified Need a tailored solution? Contact us for a customized layout, technical drawings, or send your material for a performance test. Mizar Recycling Machinery

Year of construction: 2026, condition: new, functionality: fully functional, power: 200 kW (271.92 HP), load capacity: 1,300 kg, MIZAR PRP Series - Copper Wire Granulator & Cable Recycling Plant Turnkey Solution for Maximum Copper Recovery (99% Purity) The MIZAR PRP Series is a fully automatic cable recycling line designed to process complex, mixed, and contaminated cables into high-purity copper and plastic granules. Built for 24/7 industrial use, it ensures fast ROI, low operational costs, and maximum efficiency. Dodpfx Aleyy Rk Hobskt 7-STEP PRECISION SEPARATION (100% Dry Process) • Shredder (SSH): Pre-shredding for bulky cables. • Magnetic Separator (OMS): Ferrous metal extraction. • Granulator (FGR): Fine size reduction. • Zigzag Separator (ZZS): Air separation of light fractions. • Turbo Mill (TRM): Ultra-fine grinding for complex wires. • Densimetric Separator (DES): Density-based final pure copper separation. • Dust Collector (DTF): Clean, eco-friendly operation. PROCESSED MATERIALS Twin & earth, flexible, telecom (Cat 5/6), complex automotive harnesses, underground, coaxial, and mixed WEEE cables. MODEL RANGE & TECHNICAL SPECS (Select the ideal capacity for your facility) • PRP S1: Up to 400 kg/h | Total Power: 80 kW | Footprint: 50 m² • PRP M1: Up to 800 kg/h | Total Power: 135 kW | Footprint: 100 m² • PRP L1: Up to 1300 kg/h | Total Power: 200 kW | Footprint: 120 m² • PRP XL1: Up to 2000 kg/h | Total Power: 300 kW | Footprint: 140 m² CORE ADVANTAGES • Up to 99% copper purity • Smart PLC automation with continuous feeding • Vibration-optimized, heavy-duty chassis • CE, ISO 9001, 14001, 45001, 27001 certified Need a tailored solution? Contact us for a customized layout, technical drawings, or send your material for a performance test. Mizar Recycling Machinery

Condition: defective spare-parts repository (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: 30038908, overall weight: 15,700 kg, We are selling a damaged machine that requires repair – sold as is, without warranty: Machine: Hedelius Tiltenta – CNC machining center – T7 Magnum 1R 40/530/3200/12 Year of manufacture: 2016 Serial number: 30038908 Weight: approximately 15.70 tons Dksdpjzy U Ruofx Albot Damages (not a complete list): Ball screw of the X-axis is defective, including bearing, adjusting nut, timing belt, and 2 x adjusting nut KGT. Disc spring package on the fixed stop of the X-axis is defective. Hood of the HSA spindle is defective. Machine terminal is defective. MC screen/hard drive is defective. Slight deformations on the chip conveyor and compression on cable connections. The connecting lines of the terminal are defective and must be completely replaced. The tension bolts of the catching device of the Z-axis must be replaced. The machine geometry can only be measured after the machine has been electrically repaired. Any further damage to the geometry can only be recorded and determined afterward. The energy chain must be replaced. Length approx. 1,400 to 1,500 mm. Whether the Sauter swivel head was damaged during transport can only be determined during commissioning. The vertical slide of the Z-axis is defective and must be replaced. The left door must be straightened. Welding work may be required on the guide. Door switch and emergency stop chain must be checked during commissioning. Straightening work may be required at the pick-up station, as the terminal collided with it. The linear measuring system (LMG) of the X-axis is defective and must be replaced. The machine is sold in its damaged condition as a damaged object requiring repair without any warranties! The machine must be picked up within a short period, no later than week 39, otherwise storage costs will be charged. Sale basis: loaded onto a truck at the Spieß location, 61276 Weilrod Storage costs: from 21.09.2026, to be borne by the buyer.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: S36-1969, laser power: 60 W, type of cooling: air, total width: 830 mm, total height: 1,055 mm, total length: 1,221 mm, overall weight: 300 kg, We present the Trotec Speedy 360 CO2 laser with a power output of 60 watts, manufactured in October 2020. Equipped with Sonar autofocus technology, this laser is ready for immediate use and is fully functional. The scope of delivery includes: - Trotec Speedy 360 60-watt air-cooled laser and Atmos Duo plus HEPA 230V - Laptop including Win10 and CorelDraw - Aluminum grid cutting table - with pump for air supply - Rulers in mm - with masking tape - Extraction nozzle 75mm - Connection cable Technical data: - Working area: 813 mm x 508 mm - Dimensions: 1221 x 830 x 1055 mm - Laser power: CO2 60 watts - Laser source: CO2 laser, digitally controlled, air-cooled - Air assist: Improves cutting results by blowing away heat and gases - Movable starting point: Enables precise selection of the starting position for laser engraving/laser cutting Dkjdpfezzkg Isx Albst - Resolution: User-selectable from 100 to 1000 dpi - Connection: USB interface

Condition: used, Year of construction: 2012, functionality: fully functional, For sale: Autosplice ACS 2000 Global Splice System, an industrial wire processing/splicing machine. Professional equipment for the series production of electrical wires and connections. The machine uses Autosplice Spliceband technology for creating various wire and component connections. Technical specifications: Manufacturer: Autosplice Europe GmbH Model: ACS 2000 Dksdpozx Edpefx Albot Year of manufacture: 2012 Serial number: 110000450 Power supply: 230 V / 50 Hz Power consumption: 2 A Required compressed air: 6 bar / 87 PSI Weight: 51 kg CE marking The machine is used and is in the condition shown in the pictures. Inspection and testing can be carried out while the machine is powered on. Location: 5720 Sarkad, Hungary. Sold by a company, with invoice. For further information, please contact us.

Year of construction: 2017, condition: ready for operation (used), functionality: fully functional, input current: 10 A, protection type (IP code): IP20, welding current (max.): 2,000 A, machine/vehicle number: 1739289, No minimum price – guaranteed sale to the highest bidder! Dkjdpfx Aozzk Rmolbst TECHNICAL DETAILS Supply voltage: 24 V DC / 90 V DC Input current: 1 A / 10 A Welding current: up to 2,000 A at 2% duty cycle Protection class: IP20 Polarity: STD Design: Closed protective housing made of aluminum profiles Safety enclosure: With protective doors MACHINE DETAILS Control cabinet: Integrated Equipment cabinet: Mobile EQUIPMENT Signal light Welding torch Connection cable Mobile equipment cabinet Documentation The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the asset is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The information on the technical data is based on the original offer. No liability is accepted for typographical or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: used, Year of construction: 2004, operating hours: 4,147 h, functionality: fully functional, machine/vehicle number: DRI 04320080, mileage: 100 km, overall weight: 7,000 kg, fuel type: diesel, color: blue, operation weight: 14,000 kg, maximum load weight: 15,000 kg, chain condition: 70 %, bar diameter (max.): 61 mm, pipe diameter (max.): 400 mm, Equipment: cabin, crane, hammer hydraulics, hydraulics, rubber tracks, German horizontal directional drilling (HDD) machine for drilling up to 200 meters in length, with a drilling/pulling force of 15 tons + impact (28 tons) from a hydraulic hammer. Rubber tracks for speeds up to 3 km/h. Designed for laying pipes up to 400 mm in diameter underground. Drilling depth up to 1-10 meters with wireless navigation. Manufacturer: TRACTO-TECHNIK GmbH & Co, 2004. 4147 operating hours. Components and assemblies: Trailer with hydraulic drive, HATZ diesel engine, 4 cylinders, cabin, 3 boxes with drill rods (each box contains 48 rods x 3 m) = 144 rods (432 meters). Control options: 1. Manipulator for feeding drill rods. 2. Semi-automatic rod tightening and pulling. Mixing plant (8056D) with hydraulic power unit (TT-M2) DRI 8904.B, Deutz engine, 4 cylinders, diesel, with bentonite pump P-72, 320 l/min, with two bentonite preparation tanks of 4000 liters each, with two BÖRGER rotary pumps for mixing. Cable for connection to the mixing plant. Drum with bentonite hose. 2 drilling heads. Reamer Ø110. Swivel 5t. Reamers Ø280 with swivel, Ø315 with swivel, Ø385 with swivel. Eclipse navigation system. Dodpey H H Uuofx Albokt New spare working components (adapter, probe housing, bushing).

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, operating hours: 15,396 h, pressing force: 173 t, stroke length: 500 mm, overall weight: 16,000 kg, working length: 4,250 mm, Equipment: CE marking, full service history, No minimum price – guaranteed sale to the highest bidder! TRUMPF TruBend 5170 including BendMaster! The machine has been continuously serviced and maintained by Trumpf, with a complete service record. The cylinders are leak-proof and have no oil loss. The tools shown for the robot are included. TECHNICAL DETAILS Stroke: 500 mm Press force: 1,700 kN Working length: 4,250 mm Tool clamping: Hydraulic, top and bottom Number of axes: 6 Load capacity: 60 kg MACHINE DETAILS Voltage: 3 x 400 V Rated current: 41.0 A Frequency: 50 Hz Connected power: 28.0 kVA Control voltage: 24 V DC Follow-up time: max. 90 ms Follow-up distance at 220 mm/s: max. 10 mm Follow-up distance at 160 mm/s: max. 8.5 mm Operating pressure: max. 300 bar Weight: 16,000 kg Operating hours Press beam running time: 15,396 h Hydraulic system running time: 83,212 h Machine operating hours: 152,638 h EQUIPMENT CE marking Documentation/Manual Rear stop with sensors CNC crowning Bendmaster (robot with 8 m travel) Vacuum manipulators CNC gripping station Double sheet detection BendGuard laser safety device Dksdpfxszzkvcs Albst Spare parts: Cable carrier, spare vacuum plate, BWF fixators (machine feet) The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If collection is not completed within the specified timeframe, a storage fee of €20.00 per lot and for each day started will be charged. The fee must be paid before collection. The sale is made with the exclusion of any warranty or guarantee. The information on the technical data comes from the original offer. No guarantee is given for typographical or measurement errors. In case of doubt, please compare the information with the provided photos or inspect the goods on-site before the end of the auction.

Condition: used, Year of construction: 2016, The DT-250 series is a hot-bar/ACF bonding machine, intended for connecting flexible circuits, PCBs, and displays, among other applications. The DT-250 features a manually operated 2-position front/rear slide with approximately 200 mm of travel. Manufacturer: Unitek Eapro B.V., Helmond, Netherlands Type: ACF DT-250-GH Serial number: 0620905 Year of manufacture: 2006 Power supply: 230 V Current: 6.3 A Phase: 1-phase CE marking Type: ACF DT-250-GH Serial number: 0620905 Year of manufacture: 2006 Power supply: 230 V Current: 6.3 A Phase: 1-phase CE marking Property Specification Type DT-250 Technology Pulsed Heat / Hot Bar Application ACF bonding / heat-seal bonding / reflow Slide Manual, 2 positions Travel 200 mm Dsdjzzau Uspfx Albokt Bonding head SH500 Maximum force 30–500 N Pneumatic operation Yes Air pressure 4–8 bar Thermode temperature up to approx. 600 °C Temperature control Uniflow pulsed heat Workpiece/fixture up to approx. 160 × 160 mm

Year of construction: 2022, operating hours: 15 h, condition: used, functionality: fully functional, operation weight: 30 kg, feed force X-axis: 20,000 N, pipe diameter (max.): 14 mm, machine/vehicle number: 79000, Lancier Smart Wheel 2022, used very little Very few operating hours (approx. 38 hours) Includes extensive accessories Includes HONDA EU22i generator Includes cable guiding set 2.6 mm - 3.7 mm Includes cable guiding set 6.7 mm - 9.0 mm Includes drive wheel set without groove 0.8 - 3.4 mm Includes drive wheel set with groove 3.5 - 9.0 mm Includes steel transport box Dodpfx Aszphdtslbskt Includes compressed air hose with claw coupling, 10 m The blowing device Automatic logging For cable diameter 1.5 - 9 mm For outer pipe diameter 7 - 14 mm Blowing speed 0 - 100 m/min Thrust force 20 daN L x W x H 500 x 400 x 400 mm Weight: approx. 30 kg Order no. 79000

Condition: as good as new (ex-display), Year of construction: 2024, type of input current: DC, cutting height (max.): 285 mm, cutting range round steel at 45°: 230 mm, cutting range round steel at 90°: 250 mm, saw band length: 2,950 mm, saw band width: 27 mm, Title MEP SHARK 282 CCS [with semi-automatic lowering] Article number SH282CCS Motor power 1.5/1.8 kW Belt opening 285 mm Belt dimensions 2950x27x0.9 mm Weight 440 kg Speed 36/72 m/min. Cutting surface 0° 250 / 220x220 / 280x220 Cutting surface 45° right 230 / 200x200 / 220x200 Cutting surface 45° left 200 / 170x170 / 200x140 Cutting surface 60° right 120 / 80x80 / 140x80 Cutting surface 60° left Description MEP sawing machine: Basic equipment: Vice with quick adjustment and adjustable guide rails Hydraulic band clamping device with clamping pressure indicator Underframe with removable coolant tray Chip clearing brush Adjusted precision stops for cuts of 0°, 45° and 60° left and 45° right Length stop for cuts of the same length Material support arm, simultaneous connection option for roller conveyor/loading side Turntable for double mitre cuts Machine is designed for pallet truck/forklift transport M2 bi-metal band saw blade for solid and profiled material Tools and operating instructions Electrical equipment: Control panel labeled cable connections Control lamp for operational readiness Main safety switch Emergency stop button Speed changeover switch Thermomagnetic protection Undervoltage release Control handle IP 55 protected Phase comparator Dkjdpjzzkthefx Albjt Low voltage system 24 Volt Electrical coolant system 48 V (attachment of a micro-spraying device possible) Motor 1.5/1.8 KW 2 speeds 36/72 m/min. Vice opening 285 Saw band 2950 x 27 x 0.9 Weight 440 kg

Condition: ready for operation (used), EN 12285-2 / Class B Above-ground, double-walled steel tank Tank interior: mill-rolled, exterior: sandblasted, primed and painted in RAL 7036 (plating grey) Equipment: - 2 welded steel support feet - Leak detector SGB 330 DL pressure leak detector with air (230V power connection on site) at the Dsdpfx Aloy Ur Hxobskt tank top with weather protection cover - Manhole fittings, vent, PVC gauge tube with gauge rod - Suction line in 1" with male thread at the tank top - 2" filling pipe with TW closure, suction line - 2 spare sockets with manufacturer's test certificate - With welded pump console at the front - With the inscription "Zieglmeier" - Hot-dip galvanized access ladder - With a crane lug - With a nameplate Limit switch 23 RO 400mm> Adjustable for above-ground and underground tanks for the storage of heating oil EL according to DIN 51603-1, diesel fuel according to DIN EN 590 and biodiesel according to DIN EN 14214. For cylindrical, horizontal tanks made of steel according to EN 12285-1, EN 12285-2 and EN 6624-1 as well as made of plastic or other recognized materials, whose design and dimensions comply with the standards listed above and which are approved according to their design. Also for cylindrical, vertical tanks made of steel according to DIN 6619-1, 6623-1. Cable connection box on the GWG. Ref. manufacturer article number 46125 Packing unit 1 piece Manufacturer name AFRISO Length 400 mm Connection 1" male thread Approval EMC directive (2014/30/EU) Weight 0.901 kg

Condition: good (used), mileage: 450,051 km, power: 368 kW (500.34 HP), first registration: 06/2016, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 8x4, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 7,500 kg, permissible axle load (axle 3): 9,750 kg, Year of construction: 2016, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, fog lights, onboard computer, soot filter, = Additional Options and Accessories = - Rear work lights - Front work lights - Leaf spring suspension - Enclosed cab - Cab - Refrigerator - Air suspension - Particle filter - Sleeper cab - Power take-off (PTO) = Notes = Volvo FM13.500 Globetrotter 8x4*4 - Cable system / 3-way tipper - Euro 6 - I-Shift Year of manufacture: 8-6-2016 Mileage: 450,051 km Djdpfx Alozv Dtwsbjkt YV2XT40G2GA789806 Cable system - 3-way tipper 2x steering axle Euro 6 I-Shift Refrigerator = Further Information = Transmission Gearbox: I-Shift, 12 gears, automatic Axle Configuration Front axle 1: Tire size: 385/65R22.5; Max. axle load: 8000 kg; Steered; Suspension: Leaf spring suspension Front axle 2: Tire size: 385/55R22.5; Max. axle load: 7500 kg; Steered Rear axle 1: Tire size: 315/80R22.5; Double tires; Max. axle load: 9750 kg; Suspension: Air suspension Rear axle 2: Tire size: 315/80R22.5; Double tires; Max. axle load: 9750 kg; Suspension: Air suspension Weights Unladen weight: 13,505 kg Payload: 21,495 kg GVWR: 35,000 kg Condition Technical condition: good Optical condition: good

Condition: new, functionality: fully functional, Year of construction: 2026, CORMAK GF1500 PROFESSIONAL CHAIN TRENCHER – POWER, PRECISION AND PRODUCTIVITY The CORMAK GF1500 Chain Trencher is a professional machine designed for digging narrow trenches for cables, pipes, irrigation systems, water supply lines, drainage systems, and other underground utilities. Thanks to its precision, high working speed, and compact dimensions, it can easily operate close to fences, buildings, and other obstacles, even in confined areas with very hard or compacted soil. Key Features and Advantages Powerful 15 HP engine – delivers high cutting chain traction for efficient operation in hard and compacted ground. Precise trench dimensions – digging depth up to 600 mm with a trench width of 100 mm. Heavy-duty cutting system – the chain is equipped with 27 carbide-tipped teeth, allowing it to cut through roots and small stones with ease. Excellent manoeuvrability – the balanced design and compact dimensions make the machine easy to operate in narrow gateways, gardens, and confined working areas. Heavy-duty industrial frame – manufactured from thick-walled steel profiles with a durable powder-coated finish for maximum resistance to mechanical damage and corrosion. Operator safety – equipped with protective guards and ergonomically positioned controls for safe and comfortable operation. Applications It is specifically designed for creating straight, clean, and narrow trenches for: Electrical cables Fibre optic cables Water pipes Gas pipelines Drainage systems Irrigation installations Machine Specifications Specification Value Trenching Width 100 mm Trenching Depth 150 / 300 / 450 / 600 mm Number of Teeth 27 carbide-tipped teeth Chain Length 2,000 mm Maximum Chain Speed 550 m/min Tyres 145/70-6 Machine Height 1,100 mm Machine Length 2,100 mm Machine Width 720 mm Machine Weight Approx. 175 kg Engine Specifications Specification Value Engine Type 4-stroke OHV, air-cooled Engine Displacement 420 cm³ Rated Power 9.0 kW (12.24 HP) Maximum Engine Power (EPS*) 15 HP Starting System Manual recoil starter Cylinder Cast-iron sleeve Cylinder Bore 90 mm Stroke 60 mm Maximum Engine Speed 3,600 rpm Fuel Tank Capacity 6.5 L Engine Oil Capacity 1.1 L Dry Engine Weight 31 kg Engine Dimensions (L × W × H) 499 × 370 × 433 mm Dksdpfx Alevzqk Rsbjt *EPS – Effective Power Solutions Engine Features OHV technology – provides optimum performance, longer engine life, and improved fuel efficiency. Lo-Tone PRO muffler – significantly reduces operating noise for quieter performance. Dual air filtration system – protects the engine from airborne contaminants, extending service life. Automatic governor – maintains stable engine speed and delivers consistent power under demanding working conditions. Cast-iron cylinder sleeve – improves durability, wear resistance, and oil control. Dual ball bearings – increase engine durability and extend service life. Float-type carburettor – ensures precise fuel delivery for easier starting and reduced fuel consumption. High torque output – delivers greater pulling power and improved digging performance. Protective spoil guard – shields the operator from excavated material thrown by the digging chain. The CORMAK GF1500 combines powerful performance, precision trenching, and robust construction, making it an ideal choice for demanding professional applications in construction, utilities, and landscaping.

Year of construction: 2009, condition: used, Complete cable recycling plant for sale – including MG Recycling Compact 220T (in excellent condition) For sale is a complete cable recycling plant (dry process) for the efficient recovery of copper from cables. Dodpfxszgx H Hs Albskt ⭐ Core component of the plant: MG Recycling Compact 220T (year of manufacture 2009) * Industrial compact system for separating copper, aluminum, and plastic * Capacity: up to 400 kg/h * Power consumption: approx. 37 kW * High-quality granulation & separation * Very robust design (approx. 3.2 t machine weight) ➡️ Proven system for cable recycling with high purity and reliable continuous operation. ⸻ ⚙️ Other components of the plant: * Large screening system (TST – separation & sorting technology) * Additional separation table for post-separation * Various conveyor belts & screw conveyors * Large two-shaft shredder for pre-shredding * Cable stripping machine The components from TST are specifically designed for industrial separation and screening processes and enable very precise classification and purification of materials. ⸻ Performance data of the complete plant: * Throughput: approx. 200–300 kg of cable per hour (realistic in operation) * Recovery: up to 99% copper content * Process: completely dry (no water, no sludge) * Ideal for: * Copper cables * Electronic scrap * mixed cable batches ➡️ Very efficient post-processing through additional screening and separation tables → maximum yield! —————- Special features: * Completely coordinated production line – ready for immediate use * Expandable / modular design * Perfect for commercial cable recyclers & recycling companies * Energy-efficient separation technology without wastewater —————- Condition & sale: * Plant is in good condition and currently in operation * Sale due to operational restructuring * Inspection possible by appointment —————- Price: Negotiable – realistic offers welcome

Condition: good (used), Year of construction: 2013, functionality: fully functional, arm reach: 1,611 mm, For sale is a Kuka industrial robot, model KR 16-2. - 1x pedestal for the robot, height approximately 30cm - 1x KRC4 control cabinet - 1x KCP4 operator panel, 00-168-334 Dkedpfxszzacle Albst - Connection cables - Shipping is possible for an additional charge.

Year of construction: 2011, operating hours: 2,600 h, condition: used, functionality: fully functional, Cable granulator for processing cable scrap Shredder + WS15 granulator + belts Technical data Throughput depends on material and screen, max. 500 kg/h Operating hours approx. 2600 h Total weight 5.7 t Height 2.75 m Width 7.9 m Depth 10.1 m Power consumption 58 kW at full load Power consumption 42 kW at idle Connection 400 V/550 Hz (fuse rating 125 A + 80 A slow-blow) The system is assembled (demo unit) and can be inspected and demonstrated on site. System overview 1x ICS CONTECT Pre-shredder Carrera-6D.LN WS15 1x ICS CONTECT Radial fan MGTN7 1x ICS CONTECT Shredder 40/60 VGA 1x ICS CONTECT Separation table DK 20.II 1x ICS CONTECT Mobile extraction system U-3000 Djdpfx Aljza Ahcobjkt 1x ICS CONTECT Conveyor belt bg GBF 1x Föratec Lifting and tilting device (not installed) 1x Ventilation system with various ducts (not installed) - Spare blades for shredder available

Condition: ready for operation (used), Year of construction: 2013, operating hours: 29,764 h, functionality: fully functional, machine/vehicle number: 6640-105136, load capacity: 235 kg, arm reach: 2,550 mm, controller model: IRC5, repeat accuracy: 0.05 mm, number of axes: 6, TECHNICAL DETAILS Load capacity: 235 kg Reach: 2,550 mm Repeatability: ±0.05 mm Axis 1: +170° to -170° Axis 1 optional range of motion: +220° to -220° Axis 2: +85° to -65° Axis 3: +70° to -180° Axis 4: +300° to -300° Axis 5: +120° to -120° Axis 6: +360° to -360° Axis 6 standard rotation range: ±96 revolutions MACHINE DETAILS Controller: IRC5 Operating hours: 29,764 h EQUIPMENT Manipulator IRC5 controller cabinet Dkjdpfozxqcwsx Albst All cable sets Teach pendant

Condition: excellent (used), Year of construction: 2010, operating hours: 2,125 h, functionality: fully functional, MG Recycling – Copper Cable Granulation Line Manufacturer: MG Recycling Type: Matrix400 Complete cable granulation line Condition: Very good – In perfect working order Availability: Immediate Technical description: Cable granulation line including: • Pre-shredder, completely overhauled recently o All rotor bearings are new o Gearbox bearings are new • Conveyor with magnetic rollers for scrap separation • Metering hopper • Feeding conveyor Dodpfx Aex It N Uolbekt • Blade mill with 3 / 4 / 5 mm sizing screens • Separation by cyclone and zig-zag separator • Finishing turbo • Density separation table • Dust extraction with bag filter Spare parts: • Pre-shredder: 1 set of knives + counter knives • Blade mill: 3 sets of blades and counter blades Capacity: ≈ 200 kg/h of finished product Application: Processing and recycling of copper cables Price: €95,000 (Complete processing line) Spare parts: €20,000 Additional information: • Photos and further information available upon request 📩 Contact us for more information.

Year of construction: 2006, condition: refurbished (used), functionality: fully functional, We are offering this refurbished MG Recycling M_04772 cable granulator, manufactured in 2006. It underwent a major overhaul in 2024. New switchgear control cabinet, new knife sets. Wagner pre-shredder, type WS 15, manufactured in 2007, 15 kW. Dkodpfey D Ug Tox Albjt Feed conveyor, extraction system, and magnetic vibrating table, manufactured in 2021. Output: approximately 150 - 180 kg/hour, depending on the material. Location: Switzerland, 8260 Stein am Rhein. Asking price: EUR 59,000 (negotiable) If you have any questions or require further information, please feel free to send us a message or call us.

Condition: new, functionality: fully functional, overall weight: 105 kg, Year of construction: 2025, What is controlled jacking? Controlled jacking is a trenchless technology that allows underground installations—such as water pipes, sewage pipes, power cables, electrical cables, telecommunications cables, fiber optic cables, water pipes, and sewage pipes—to be laid without the need for extensive excavation. The jacking machine is hydraulically driven and equipped with a pilot head that can be used to correct the path of the jacking. Thanks to measuring systems, the operator controls the depth and direction of the jacking, which allows for high precision, even with passages several dozen meters long, in situations where accuracy and precise avoidance of obstacles in the terrain are important in order not to damage the existing infrastructure and to safely bypass it. This solution is particularly valued in places where earthworks are difficult or impossible, e.g., under roads, lawns, tram tracks, parking lots, sidewalks, or urban areas. Why use controlled pipe jacking? Controlled pipe jacking is an alternative to traditional excavation, eliminating the need to dig up the surface. This method significantly reduces the time needed to complete the project, lowers the cost of restoring the site to its original condition, and minimizes the impact on traffic and the environment. The most important advantages of controlled pipe jacking technology: - no need to interfere with above-ground infrastructure, - the ability to work under obstacles (e.g., roads, sidewalks, lawns, property entrances, railroad tracks), - reduction of noise, - vibrations, and environmental pollution, - high route accuracy, Djdsxxhzwepfx Albekt - quick mobilization of equipment and short completion time, - lower risk of collision with existing installations. - no need to use bentonite slurry, - no spoil during jacking Thanks to these features, controlled jacking is commonly used in the construction of municipal networks, water and sewage connections, gas, fiber optic and cable connections. Application of controlled jacking Controlled jacking is ideal wherever installation is required without disrupting the surrounding area. The most common applications for jacking machines are: - crossings under roads and streets with heavy traffic, - jacking under railway and tram tracks, - crossings under watercourses and canals, -installations under sidewalks, parking lots, squares, and industrial areas, - connections to properties without digging up the entire area. With the ALUSTEER product, no drilling mud (bentonite) is used, which significantly reduces implementation costs and environmental impact. This technology can be used both in cities and in non-urban areas – wherever precision, speed, and reduced impact are important. Accuracy and direction control Modern jacking machines use sensors that enable continuous monitoring of the head position. The operator tracks the parameters on the receiver and operator tablet and reacts in case of deviations from the planned route. Such solutions ensure: - high precision of the breakthrough, - safety for the existing infrastructure, - repeatability and predictability of results. In practice, deviations from the jacking axis are usually no more than a few centimeters, which is fully acceptable in most projects.

Condition: excellent (used), functionality: fully functional, Year of construction: 1998, machine/vehicle number: DN1771/1789/1791, 1x Abus VS column-mounted slewing crane, capacity 500 KG Dkodpfszv Hy Tox Albot There are 3 identical cranes available. Load capacity at full outreach: 500 KG / 0.5 tons Height: approx. 3.6m Upper carriage outreach: approx. 3.42m Outreach: approx. 2.5m Hook height: approx. 3m Total weight: approx. 350 Kg Includes Abus chain hoist with floor control (2 lifting speeds) with slewing and trolley drive Connection to 400V 16A, slewing range 360° Crane is disassembled and immediately available. The gripper is not included! Item location is 75053 Gondelsheim. Only the crane system shown in the pictures is being sold. Very good condition, see pictures. Shipping via freight forwarder or collection by arrangement.