Used Uv Tunnel Flooring for sale (10,717)

Condition: new, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, loading space volume: 93 m³, Chassis Version with continuous chassis reinforced, new body manufactured in a self-supporting design with corresponding reinforcements in the lower flange for particularly high stability and strength, cross member 140 mm high reinforced version (for high ground loads) additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure, (trailer construction max. 39,000 kg) Axles and suspension "Disc brake 22.5" Jost (DCA) axle units version, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA-readable in the tractor unit (display), 1st axle with traction aid (new EC regulation, without tractor unit equipment), (on request against MP 1st + 3rd axle liftable) Duedpfsyh S Aisx Ac Njn Tires and wheels 6 wheels with tires of size 385/65 R 22 .5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75?22.5 ET 120 Seatposts mechanical support winches with two speeds, 2x 20 ton support load with swivel foot, Braking system according to E.G. standard?EBS E-system Wabco with RSS system (roll stability support) and premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system, electrical system according to the guidelines of the EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint 3 integrated in the aluminum rear end, 24 volt system with 1?15 pin and 2x7 pin. Socket, with side clearance lights in LED design, 2 reflective panels on the rear, 2 white position lights at the front and 2 at the rear. red, 2 separate LED reversing lights integrated in the U-protection Structure/trough "structure fully welded inside" reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn Aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross beams, floor forklift load approx. 9 ton/m2 cross beams mounted accordingly closely (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design, smooth rear wall in straight design with 2 aluminum wing doors 50/30 mm thick with 2 pivot rods Locks in the welded aluminum rear frame attached to Teflon bearings and stainless steel bearings, doors secured in the open position with a chain on each side, hard wear plates on the side walls approx. 2,000x1,500x4mm fully welded, running residual emptying wall with Kevlar tarpaulin approx. 1,800 mm long plus side with Kevl. -Plane sealing, service door in front wall with ladder turning inwards Hydraulic system "Cargo - Floor" sliding floor system Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE?HD sliders plus anti-lifting slide bearings, type CF 10 mm floor version, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric. Rear left control with radio control integrated in a lockable waterproof box, without hydraulic hoses Accessories 6 PV

Condition: used, axle configuration: 3 axles, first registration: 02/2021, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,675 mm, loading space volume: 87 m³, Chassis Manufactured in self-supporting aluminium construction with corresponding reinforcements in the lower chord for particularly high stability and strength. Aggregated chassis made of ALUMINIUM, 140 mm frame height! (max. 39t) Axles and Suspension “Disc brakes 22.5” Jost axle assemblies, 3 x 9 tonnes with DC air suspension, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the tractor unit (without tractor unit equipment), 1st and 3rd axle separately liftable with starting aid (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension Tyres and wheels 6 wheels with tyres size 385/65 R 22.5 approx. 50% remaining tread, on Alcoa aluminium rims, satin finish, 11.75x22.5 ET120 Landing gears Aluminium drop support legs, manufacturer Alu Leg, with 2x10t support load, pivoting feet used for air suspension Braking system In accordance with ECE regulation, dual-circuit braking system, Wabco EBS E system with RSS (Roll Stability Support), spring brake system on two axles operated from rear, aluminium air reservoir system, premium modulator Duodpfxjxuy I Io Ac Nen Electrical system According to STVZO guidelines, with 2 LED five-chamber lights, Aspöck Europoint III type, integrated in the aluminium rear end, 24 volt system with 1x 15-pin and 2x 7-pin sockets, with side LED outline marker lights, 2 separate LED work lights at rear, 2 LED work lights at the side at landing gear height, 1 LED work light inside, front left, operable from outside Body/Tipper body "Body fully welded inside" Front wall load 17,250 daN, rear and side walls 10,250/13,400 daN. Aluminium tipper body, side walls made of 30 mm thick aluminium plank profiles (2-3 mm), 600 mm wide, fully welded with lower and upper chords, interior plank profiles fully welded!! Floor as moving floor system laid on 140 mm aluminium cross members, closely spaced (approx. 350 mm), aluminium front wall with 600 mm plank profile, 2-3 mm strong, straight version, special aluminium corner profiles in beveled design, smooth tailgate straight version with 2 aluminium double-wing doors, 50/30 mm strong, with 4 locking rods fixed in welded aluminium rear frame in Teflon and stainless steel bearings. Moveable aluminium wall suspended from the reinforced upper aluminium chord with “Kevlar sheet” for complete discharge, lateral brush seal and additional Kevlar sheet. Integrated grain funnel with cover plate, operable from outside, with viewing window at rear left. 2 sample slides in the rear doors Hydraulic system "Cargo Floor" 24-slat system Moving floor system in the floor with hydraulically operated aluminium profiles on aluminium box sections with approx. 880 PE-HD sliders, floor approx. 6 mm smooth, hydraulics with approx. 200 mm working stroke. Fixed halves at front wall, separate option for connecting hydraulic line under the vehicle with fixed halves, pipe size NW 21, fixed halves with to-be-specified size and design. Working pressure 190–max. 240 bar, aluminium end pieces welded into floor, operation at rear left with remote control in a lockable waterproof box, no hydraulic hoses Accessories PVC mudguards with rubber splash aprons, aluminium spare wheel holder, side aluminium underrun protection in foldable design, 1 toolbox approx. 800x460x430 mm plastic, approx. 3.7 m aluminium ladder, tarpaulin 680 g/m² quality with rolling tarpaulin system including side quick-release locking bar and tension strap at front wall, catwalk at front wall with double ascent, 3

Condition: new, maximum load weight: 28,320 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, Chassis: Version with continuous chassis, newly manufactured in self-supporting ALU construction with corresponding reinforcements in the lower chord for particularly high stability and strength, cross member 140mm high reinforced version (for high floor load) additional reinforcement as gusset plate in the front lower chord/vehicle frame area, chassis made of galvanized steel up to support structure Axles and suspension: Disc brake 22.5, Jost (DCA) axle units, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA readable in the SZM (display), 1st axle with starting aid (new EC regulation, without SZM equipment), (on request against MP 1st + 3rd axle liftable) Tires and wheels: 6 wheels with tires size 385/65 R 22.5 according to manufacturer's choice (Br-Go-Co) on steel rims silver, 11, 75x22.5 ET 120 Kingpin: 2" - screwed into a 10 mm thick plate Duedpefi Nmwjfx Ac Non Fifth wheels: mechanical landing gear with two speeds, 2x 20 tons drawbar load with swivel foot Brake system: according to E.G. standard, EBS E system Wabco with RSS system (Roll-Stability-Support) and Premium Modulator, spring brake system acting on two axles with operation at the rear, ALU air reservoir system Electrical system: according to the guidelines of EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint integrated in the ALU rear end, 24 volt system with 1x15 pole and 2x7 pole socket, with side outline lights in LED design, 2 reflective panels on the rear, front pole lights 2x white, rear 2x red, 2 sep. halogen reversing lights integrated in the U-protection Body/body: Body fully welded on the inside, reinforced side walls Side walls, front wall load 17,250 dkn, side and rear wall 13,400 dkn/10,400 aluminum trough, side walls 30mm thick ALU plank profiles (2-3 mm) 600mm wide completely welded in with bottom and top chord, plank profiles fully welded inside, floor laid as a moving floor system on 140mm ALU cross beams, floor stacker load approx. 9 to/m2 Cross beams mounted correspondingly narrow (approx. 350mm), design, special aluminum corner profiles in bevelled design smooth rear wall in straight design with 2 ALU hinged doors 50/30mm thick with 2 espagnolettes Locks in welded-in ALU rear frame fixed in Teflon bearing and Inox bearing, Doors secured in open position with one chain on each side, hard wear plates on the side walls approx. 2000x1500x4mm fully welded, moving residual emptying wall with Kevlar tarpaulin approx. 1800mm long plus side brushes with Kevlar tarpaulin seal, service door in front wall with ladder turning inwards Hydraulic system: Moving floor system in the floor with hydraulically moved ALU profiles on ALU square profiles with approx. 880 PE-HD sliders plus anti-lifting plain bearings, type CF 10mm floor version, hydraulics with approx. 200mm working stroke, fixed halves on the front wall, separate possibility for connection of the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design still to be specified, operating pressure 190-max.240 bar, ALU end pieces welded into the sliding floor, electrical operation behind left with remote control integrated in a lockable watertight box, without hydraulic hoses Accessories: 6 PVC mudguards with 2 anti-spray mud flaps, 6 PVC splash plates above the wheels, 1 ALU e-wheel holder, lateral ALU collision protection in folding design, 1 tool box approx. 860x460x400mm in plasti

Year of construction: 2016, condition: ready for operation (used), Opening dimensions: 550x300mm, tunnel length: 1150mm, connected load: 7kW, weight: 215kg, with conveyor belt and documentation. Dodpfxoiph Uve Ac Neun

Condition: ready for operation (used), Max. power: 4000W, max. compressed air supply: 6ar, with Conveying System APS/ALS and Chiller Hyfra LWK 31/1-S. Duodpfx Ajixqkzec Njn

Year of construction: 2013, condition: ready for operation (used), Connected load: 4kW, weight: 1t. Dujdpfxshlp Efe Ac Non

Year of construction: 1979, condition: ready for operation (used), A Gebr. Pfeiffer ball mill is available. Drive power: 330kW, diameter: 2400mm, length: 5000mm, number of motors: 2, motor weight: 180kg, flywheel width: 3.2mm. On-site inspection is possible. Dodpfx Aov Dwirjc Neun

Condition: ready for operation (used), HUGO BECK high-performance shrink tunnel type SLB 5012/25, pass-through width: 500mm, pass-through height: 230mm, tunnel hood length: 1200mm, working height: adjustable from 850mm +/- 50mm, maximum temperature: 250°C, rod chain conveyor infinitely adjustable from 5 to 30m/min. Inspection possible by appointment. Dsdpfx Acoxt Rlbe Njun

Condition: ready for operation (used), Year of construction: 2017, An Agfa UV-LED hybrid large format printer including a roll-to-roll unit is available. Printing technology: UN-LED inkjet, max. print width: 2540mm, resolution: 1200dpi, print colors: CMYKLcLm+white+primer, max. print speed: 275m²/h, substrate type: rigid/flexible, max. substrate thickness: 50mm. Documentation available. On-site inspection is possible. Dodpfoww Iu Rox Ac Neun

Year of construction: 2005, condition: ready for operation (used), Drying capacity: 2x120W/cm, total drying capacity: 14000W, working width: 600mm, lamp type: 2x120W/cm, cooling: integrated, vacuum cassette: adjustable, conveyor belt speed: adjustable, machine dimensions X/Y/Z: approx. 3900mm/1200mm/1300mm, weight: approx. 700kg, operating hours: approx. 4400h. Including ozone extraction and a new measuring device UV-Integrator Full-UV with integrated heat shield and calibration certificate. 2 converters, 2 lamps and the belt have been replaced. Documentation available. On-site inspection is possible. Dujdpsu Afz Refx Ac Njn

Condition: ready for operation (used), Year of construction: 2014, Printing technology: piezo DOD printheads: Xaar 1001, resolution: 720x360dpi, drying: 1xUV GOZ and 1xUV FOZ Höhnle with 7,2kW, pinning system (LED) after printing unit 1+5, extraction: in the drying unit for cooling the UV lamps and for odor minimization and improvement of sensory conditions, inert gas system: oxygen-reduced curing unit (inert gas system), consumption: under 6m³/h, printing: roll-to-roll, web width: 350mm, print width: 330mm, repeat length: min./max. printable section length 10-1000mm, print tolerance: single spacing +/-0,2mm, cumulative spacing: +/-1,5mm (over one meter), register: register accuracy +/-50μm, max. speed: 48m/min with 4 colors depending on ink coverage, white at 30m/min, speed must be preselected from 18 to 48m/min, print pre-treatment: corona with 1500VA, web cleaning: polymer rollers LC 350, air shafts: for cores with 76mm diameter for unwinding and rewinding, air shaft clamping pneumatic, clamping releasable to allow rotation of the winding mandrel, max. roll diameter for unwinding and rewinding: 610mm, max. roll weight for unwinding and rewinding: 120kg. power consumption: approx. 39kVA/60A, air consumption: 100NL/min, cooling capacity: approx. 60.000BTU/h =18kW, data interface: USB2.0, Ethernet, data format: PDF-X1 or X3 or EPS or AI, length: 4550mm, width: 1750mm, height: 2200mm, weight: approx. 3t. With documentation, chiller unit and inks. The machine is fault-free, complete and ready for operation, and has been serviced regularly. On-site inspection is possible. Djdpfx Acoxz Ewno Njun

Condition: ready for operation (used), A 4-color central cylinder printing system WDB Systemtechnik is available. Printing units: 4, ink type: UV, max. material width: 650mm, max. printing width: 600mm, printing length range: 300mm–800mm, max. printing speed: 250m/min, material types: PET/OPP/aluminum/laminate/composite materials, material thickness range: 20µm–150µm, max. unwind and rewind roll diameter: 1000mm, operating hours: 28h, printed length: approx. 57000m. System components: unwind and rewind unit, corona, UV dryer, drying channel, IR heater, cooling unit, and supply and exhaust air fan. Including lamination unit. Documentation available. An on-site inspection is possible. Dujdoxmkctjpfx Ac Nsn

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, shaft length: 355 mm, input voltage: 230 V, laser power: 20 W, UV Laser Engraving Machine with 20 Watt Laser Power - Laser source with 355nm wavelength / 20 Watts Demonstration machine, with minimal operating hours (approx. 15 hours) - incl. Windows 64-bit PC system - incl. 22" monitor - everything fully installed and calibrated - Engraving software in German - 3D software (MM3D) - very easy to operate - switch on and start working - UV laser source with 20 Watts for high-contrast and fast marking with extremely high resolution - suitable for engraving almost all metals (stainless steel, brass, aluminium, etc.) - suitable for engraving almost all plastics (including PVC, silicone, etc.) - suitable for engraving real glass (including crystal glass) - capable of cutting real glass - heavy-duty industrial quality - complete system / ready for immediate use - working area approx. 500 x 600 x 600 mm (W x D x H) - clamping surface with threaded inserts on a 50 mm grid - LED workspace lighting - 50 mm duct connection for fume extraction - Engraving area approx. 150x150 / 200x200 / 300x300 mm (switchable) - 3D scanner for marking surfaces of any shape - incl. foot pedal to start the engraving process Sale to businesses only. Delivery / consulting / sales only within Germany / Austria / Switzerland. Dujdpfx Acoflrnao Nsn Please also ask about our attractive leasing/financing options. Machine dimensions approx.: Width: 800 mm Height: 1800 mm Depth: 1000 mm Weight: approx. 150 kg

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: DT1UE18105029734, This Rational Ultra Vent Hood for Rational combi steamers, including connection kit, is suitable for combi steamers CMP, SCC 61/101 electric, from model year 2011 to current (Index H+I). The hood was tested in our in-house workshop and is fully functional. The hood has dents and scratches on one side panel due to improper transport. This does not affect the function of the hood, but for this reason, we are offering it at a special price. The RRP for this Ultra Vent Hood is €3,696 net. Service: We are happy to assist you in arranging a certified Rational customer service technician. Are you looking for a specific Rational appliance type? Contact us—we have access to a wide range of used and new equipment. We are happy to advise you on all device types. Our used equipment service for you: • 6 months warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs • Professional overhaul / inspection and expert cleaning • Tested & fully functional—or your money back • Flexible delivery or self-collection options • Expert advice—before and after your purchase • Provision of user manuals, wiring diagrams & spare parts • Inspection in accordance with DGUV V3 This Ultra Vent Hood features patented condensation technology, which binds and channels vapours and steam. Complex exhaust installation measures are a thing of the past. An external connection is not required at all. Installation is simple and even possible retrospectively. Technical Data: • W x D x H: approx. 854 x 1226 x 470 mm • Power supply: V: 230 / Hz: 50-60 • Weight: approx. 55 kg • Serial number: DT1UE18105029734 Dsdpewd Ixcjfx Ac Noun • Year of manufacture: 2018 Condition: used, fully functional Shipping: • Delivery or self-collection by arrangement • Worldwide shipping on request • Shipping to islands or mountain stations only by arrangement • Subject to change and errors excepted Do you have questions, would you like advice, or wish to view the item on site? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are made exclusively in accordance with our general terms and conditions (GTC).

Condition: used, Year of construction: 2008, Technical details: spindle diameter: 200 mm x-travel: 10000 mm y-travel: 4000 mm z-axis: 1500 mm W-axis (spindle longitudinal): 1000 mm bore spindle turning speed range: 1 - 2000 U/min dimension of the ram: 600 x 530 mm high speed spindle taper ISO: 60/50 rapid motion - x-axis: 8000 mm/min rapid motion - y-axis: 8000 mm/min rapid traverse Z-axis: 5 m/min total power requirement: 120 kW weight of the machine ca.: 135 t dimensions of the machine ca.: 16,0 x 5,0 x 10,0 m with CNC Steuerung HEIDENHAIN iTNC 530 hydrostatic guideways x and Y- axis autom. toolchanger 40-pockets autom. Pickup Station for angular milling head, universal milling head and facing head rotary table 3000 x 3000 mm , max load 60 to. v-axis 2500 mm measuring probe, chip conveyor and coolant attachment Dujdpfxew S Nn He Ac Non *

Condition: used, axle configuration: 3 axles, first registration: 11/2016, total length: 14,040 mm, total width: 2,550 mm, total height: 4,000 mm, wheelbase: 9,060 mm, color: grey, Year of construction: 2016, Rear axle 1: Alloy wheels; lift axle; Max. axle load: 9,000 kg Rear axle 2: Alloy wheels; Max. axle load: 9,000 kg Rear axle 3: Alloy wheels; Max. axle load: 9,000 kg Unladen weight: 7,670 kg Dedpfsyh Iuhjx Ac Neun Payload: 34,330 kg Gross vehicle weight (GVW): 42,000 kg APK (Technical Inspection): valid until 11/2026 License plate: OP-83-LN Contact Bob Beukers for further information.

Condition: used, axle configuration: 3 axles, first registration: 01/2019, total length: 14,040 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65, wheelbase: 9,060 mm, color: green, Year of construction: 2019, Axle configuration Tyre size: 385/65 Axle make: BPW EAC HD Brakes: Disc brakes Djdpfx Asyh Hbtsc Nsun Suspension: Air suspension Rear axle 1: Alloy wheels; Lift axle; Max. axle load: 9,000 kg; Tyre tread left: 50%; Tyre tread right: 50% Rear axle 2: Alloy wheels; Max. axle load: 9,000 kg; Tyre tread left: 90%; Tyre tread right: 90% Rear axle 3: Alloy wheels; Max. axle load: 9,000 kg; Tyre tread left: 50%; Tyre tread right: 50% Weights Unladen weight: 7,720 kg Payload: 34,280 kg Gross vehicle weight: 42,000 kg Maintenance APK (Roadworthiness test): valid until 01/2027 Identification Registration number: OR-82-NV Further information Please contact Mark van der Steen for more information.

Condition: excellent (used), axle configuration: 3 axles, total length: 12,500 mm, total width: 2,550 mm, total height: 3,900 mm, suspension: air, tire size: 385/65, color: silver, Year of construction: 2025, Equipment: ABS, = Further Options and Accessories = - Electronic Braking System (EBS) - Rear doors - Air suspension = Notes = Fully equipped with: - Aluminum chassis - Small door in front wall - 1x lift axle - Smartboard - Wabco OptiTire tire pressure monitoring system For more information, contact Mark van der Steen = Further Information = General Information Year of manufacture: 2025 Axle Configuration Tire size: 385/65 Axle make: SAF CD Brakes: Disc brakes Suspension: Air suspension Dsdpfx Acjx Ra Ucj Njun Rear axle 1: Lift axle; Max. axle load: 9,000 kg; Tire tread left: 100%; Tire tread right: 100% Rear axle 2: Max. axle load: 9,000 kg; Tire tread left: 100%; Tire tread right: 100% Rear axle 3: Max. axle load: 9,000 kg; Tire tread left: 100%; Tire tread right: 100% Weights Unladen weight: 7,270 kg Payload: 37,730 kg Gross vehicle weight: 45,000 kg Condition Technical condition: Very good Visual condition: Very good Further Information Please contact Mark van der Steen for more information.

Condition: used, Year of construction: 1988, machine/vehicle number: 1743, UV-Beschichtungsmaschine - UV-Coating machine Billhöfer Gula Speed CGS JKN 112Year 1988 - Serial-No. 1743 Format min. 300 x 500mm Dodpfxjh Axquo Ac Nsun Format max. 820 x 1120mm Feeder automatic Mabeg Grammatur 60 up to 500 gr/m2 card board Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1982, UV-Beschichtungsmaschine - UV-Coating machine Billhöfer CPUV-112Year 1982 - Serial-No. 9035 Format min. 300 x 500mm Format max. 820 x 1120mm Dodpfx Ash Ayfpsc Njun Feeder automatic Mabeg Grammatur 60 up to 500 gr/m2 card boardUV-Beschichtungsmaschine - UV-Coating machine Billhöfer CPUV- Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, maximum load weight: 33,430 kg, overall weight: 42,370 kg, axle configuration: 3 axles, first registration: 04/2016, next inspection (TÜV): 05/2026, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,450 mm, total width: 2,550 mm, total height: 3,800 mm, Year of construction: 2016, Additional information: * Curb weight: 8,940 kg * Tyre type | First axle: Goodyear * Tyre size | First axle: 385/65 R22.5 * Tread depth inner left | First axle: 50% * Tread depth inner right | First axle: 50% * Maximum axle load | First axle: 10,000 kg * Tyre type | Second axle: Goodyear * Tyre type | Third axle: Goodyear * Tyre size | Second axle: 385/65 R22.5 * Tyre size | Third axle: 385/65 R22.5 * Tread depth inner left | Second axle: 30% * Tread depth inner left | Third axle: 30% * Tread depth inner right | Second axle: 30% * Tread depth inner right | Third axle: 30% * Maximum axle load | Second axle: 10,000 kg * Maximum axle load | Third axle: 10,000 kg * Axle position | First axle: Rear * Manufacturer | First axle: Other * Brake type | First axle: Disc brakes * Suspension | First axle: Air suspension * Axle position | Second axle: Rear * Axle position | Third axle: Rear * Manufacturer | Second axle: Other * Manufacturer | Third axle: Other * Brake type | Second axle: Disc brakes * Brake type | Third axle: Disc brakes * Suspension | Second axle: Air suspension * Suspension | Third axle: Air suspension Additional equipment: * Rear doors * Homepage * Steering axle * SemCollection * SemStars * Central lubrication system Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please check with us in advance regarding costs and procedures for your country Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Specifications are subject to change without prior notice. Intermediate sale and errors reserved. Listed prices are exclusive of BPM and valid only for export. Djdpfx Acjx Eglzo Njun

Condition: new, maximum load weight: 28,050 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,530 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Brand-new Knapen moving floor trailer K 100 A5060 92 m³ * BPW axles * First axle as lift axle * Air suspension * Disc brakes * ABS/EBS * OptiTire tire pressure monitoring system * Tyres 385/65 R22.5 * Landing gears with thrust compensation * Plastic toolbox * 10 mm floor, 21 boards Dedpfx Aoyhtn Nsc Neun * Stainless steel wear plate under the floor * Radio remote control for floor, lift axle, and auxiliary lights * Round bows * Manual sliding tarp * 3-position tarp supports * 1 pair of red LED lights on the rear bow * Side marker lights with indicator function * Reversing alarm * 6 additional reversing lights at landing gears, behind last axle, and on light bar * Foldable, painted A-sign on the left rear door * Tarp color similar to RAL 9006 * Body painted in RAL 7011 iron grey * Chassis galvanized, not painted !!! The listed sales price is a fixed price ex works Knapen Trailers in NL-Deurne !!!

Condition: used, maximum load weight: 31,120 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2011, next inspection (TÜV): 05/2026, Equipment: ABS, STAS Walking Floor TYPE: S 300 ZX * Registration: 04/2011 * BPW axles * Tires approx. 50-70% * TÜV new until 05/2026!!! Duedpfx Acewvw A Is Nsn * Roll-up tarpaulin * German vehicle 2 units available!

Condition: used, axle configuration: 3 axles, first registration: 10/2023, suspension: air, tire size: 385/65R22.5, color: grey, Year of construction: 2023, Tyre size: 385/65R22.5 Axle brand: BPW Brakes: Disc brakes Duedjyhp Irepfx Ac Nen Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg; Tyre tread left: 50%; Tyre tread right: 50% Rear axle 2: Max. axle load: 9,000 kg; Tyre tread left: 40%; Tyre tread right: 40% Rear axle 3: Max. axle load: 9,000 kg; Tyre tread left: 50%; Tyre tread right: 50% Unladen weight: 8,010 kg Please contact Bob Beukers for further information.

Condition: used, axle configuration: 3 axles, first registration: 01/2020, suspension: air, tire size: 385/55R22.5, color: white, Year of construction: 2020, New tarpaulin = Further information = Tyre size: 385/55R22.5 Axle brand: BPW EAC HD Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg; Tyre tread left: 30%; Tyre tread right: 30% Rear axle 2: Max. axle load: 9,000 kg; Tyre tread left: 60%; Tyre tread right: 60% Rear axle 3: Max. axle load: 9,000 kg; Tyre tread left: 60%; Tyre tread right: 60% Unladen weight: 8,010 kg Please contact Mark van der Steen or Bob Beukers for more information. Duedpfeyhpg Ijx Ac Njn