Used Universal Lathe for sale (8,568)

Condition: used, Year of construction: 2006, x-travel 600 mm y-travel 270 mm z-travel 430 mm 630 mm table-size 1120 x 270 mm spindle turning speed range 45 - 1660 U/min spindle taper SK 40 control konventionell spindle motor 2,2 kW total power requirement 2,4 KVA weight of the machine ca. 1,35 t Bljdov Sdz Rjpfx Amron dimensions 1,8 x 1,4 x 1,8 m Machine equipped with: - Digital display - Machine light - Coolant system - Machine feet

Condition: new, x-travel 600 mm y-travel 300 mm z-travel 440 mm table-size 1120 x 260 mm spindle taper ISO 40 spindle turning speed range 35 - 1600 U/min total power requirement 2,2 kW Bodpfeulbcbsx Amroln weight of the machine ca. 1,36 t dimensions of the machine ca. 1,65 x 1,32 x 1,65 m

Condition: new, x-travel 1000 mm y-travel 300 mm z-travel 400 mm table-size 1320 x 360 mm spindle taper ISO 40 spindle turning speed range 58 - 1800 U/min Bodpfx Amjulbcnersln total power requirement 4 kW weight of the machine ca. 2,3 t dimensions of the machine ca. 2,1 x 2,1 x 1,95 m

Condition: new, turning diameter over bed 250 mm turning diameter over slide rest 140 mm turning length 550 mm Bsdpfx Asvn U Efjmreln turning speeds 50 - 2000 U/min centre height 125 mm spindle bore 26 mm tailstock quill taper MT 2 MK tailstock quill stroke 65 mm connected load frequency 230 V total power requirement 1,1 kW weight of the machine ca. 0,15 t dimensions of the machine ca. 1,3 x 0,6 x 0,65 m Benchtop lathe 3-axis LCD digital display system fully assembled. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Clock for thread cutting. Drip tray Hardened bed tracks. Emergency stop switch. Forage protection Set of wheels. Appropriate tools. Base cabinet is optional!!

Condition: new, turning diameter over bed 250 mm turning diameter over slide rest 145 mm turning length 550 mm turning speeds 50 - 2000 U/min centre height 125 mm spindle bore 26 mm tailstock quill taper MT 2 MK connected load frequency 230 V total power requirement 0,75 kW weight of the machine ca. 0,12 t dimensions of the machine ca. 1,3 x 0,65 x 0,6 m longitudinal feed. 3-jaw chuck 125 mm. 4-way steel holder. chip tray, bulkhead Blsdpfx Amskxhqnoron Hardened bed tracks. Emergency stop switch. lining protection Tool box, instruction manual.

Condition: new, turning diameter over bed 400 mm turning diameter over slide rest 264 mm turning length 1000 mm turning diameter in the gap 550 mm turning speeds 44 - 2000 U/min centre height 200 mm spindle bore 52 mm tailstock quill taper MT 4 MK Blodpfx Amjkxhqvoren connected load frequency 400 V total power requirement 1,5 / 2,4 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 1,9 x 0,8 x 1,56 m 3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 320mm bezel fixed running bezel 4-fold steel holder. Halogen machine light machine light foot brake removable chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system lining protection machine tools

Condition: new, turning diameter over bed 410 mm turning diameter over slide rest 240 mm turning length 1000 mm turning diameter in the gap 530 mm Bedpem Rlb Nsfx Amrsln turning speeds 65 - 1810 U/min centre height 205 mm spindle bore 52 mm tailstock quill taper MT 4 total power requirement 2,2 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 1,9 x 0,8 x 1,3 m Center lathe with: 3-axis digital measuring system fully assembled electromagnetic main spindle brake auto. Feed in longitudinal and transverse direction safety relay Micrometer end stop coolant device 3-jaw lathe chuck with 1 set of turning and drilling jaws German operating instructions.

Condition: excellent (used), Year of construction: 2025, operating hours: 4,077 h, functionality: fully functional, machine/vehicle number: 10511079, turning length: 550 mm, turning diameter: 160 mm, spindle bore: 65 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 140 rpm, travel distance X-axis: 110 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 320 mm, spindle motor power: 32,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 50 m/min, rotational speed (max.): 6,000 rpm, total height: 2,490 mm, total length: 6,910 mm, total width: 2,092 mm, workpiece weight (max.): 4 kg, type of input current: three-phase, torque: 170 Nm, overall weight: 9,000 kg, bar passage: 65 mm, chuck outer diameter: 160 mm, bar diameter (max.): 65 mm, Equipment: documentation/manual, rotational speed infinitely variable, For sale is an INDEX C200 CNC turning machine, manufactured in 2025, from our own machine stock. The machine was delivered and put into operation in 2025 and is in very good, like-new condition. The C200 features extensive equipment with a main and counter spindle, three tool turrets with powered tools, and Y-axes, making it particularly suitable for the economical series production of complex precision turned parts. Bljdpfx Asz Hmq Demron Technical data / Equipment: - Manufacturer: INDEX - Model: C200 - Year of manufacture: 2025 - Machine No.: 10511079 - Main spindle D65 - Counter spindle D65 - Workpiece diameter: max. 65 mm - Main spindle speed: max. 6,000 rpm - Counter spindle speed: max. 6,000 rpm - 3 tool turrets - 14 stations per tool turret - Powered tools - Tool speed: max. 8,000 rpm - Y-axes on the tool turrets - C-axis on main and counter spindle - Tool monitoring and tool management - Coolant high-pressure supply - Coolant/filter system - Chip conveyor - Workpiece removal / portal extraction device - Interface for bar loader magazine UNIMAG4 - Electronic spindle for spindles and drive power - CE conformity - Rated power: 54 kW - Connection power: 65 kVA - Connection: 400 V / 50 Hz Current operating hours according to the machine control: - On time: approx. 4,077 h - Hydraulics: approx. 3,863 h - Spindle / drive running times according to the operating hour counter: S1 approx. 146 h / S2 approx. 1,396 h / S3 approx. 317 h / S4 approx. 1,846 h / S5 approx. 2,224 h The machine is currently located in our factory and can be inspected and demonstrated under power after prior arrangement. We would be happy to provide further detailed images, technical documentation, and an official offer with a detailed equipment list if you are seriously interested.

Condition: repair required (used), functionality: limited functionality, Manufacturer: Maschinen Wagner Model: DCE 230 × 1500 Machine type: Lead and feed spindle lathe Machine no.: 2JG0160 Year of manufacture: 1990 Power connection: 380 V / 50 Hz Distance between centers: approx. 1,500 mm Swing over bed: approx. 230 mm* Swing over cross slide: approx. 460 mm* Turning diameter over cross slide: approx. 290 mm* Spindle bore: approx. 60 mm* Bedpez Hpahefx Amrjln Max. spindle speed: approx. 1,800 rpm* Main motor: approx. 5.5 kW* Machine weight: approx. 1,800–2,200 kg* Feed: mechanical longitudinal and transverse feed (feed shaft does not rotate, presumably a shear pin has sheared) Thread cutting: functions via lead screw and feed gear Guideways in very good condition. Accessories: Tool holder, tailstock center The machine can be inspected on site.

Year of construction: 1955, condition: used, Union model L.2.A.S. 5" x 24" Lathe. Backgeared and Screwcutting lathe with a detachable gap bed. A practical and characterful old lathe that works well and has plenty of capacity in a compact size. From the family agricultural engineering workshop, which is now sold. 3-phase 415v, so ideal for conversion to variable-speed drive from a 1-phase to 3-phase inverter (not included). 3-jaw chuck, faceplate and a collection of changewheels for screwcutting. I can send a video of it running. Buyer to arrange and fund the shipment. Foklifting onto your van / truck may be possible with the agreement of the new property owner. Please contact me if you would like to arrange this. Bljdpfx Asz Hifdomren Location is near Kings Lynn, Norfolk, UK. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Precision lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: OMAP, Lead screw and feed screw lathe type 180 -Turning length: 1600 mm -Turning diameter over bed: 410 mm -Turning diameter without bed: 570 mm -Turning diameter over support: 230 mm Blodpfxsz D Tt Hj Amrjn -Spindle bore: Ø 53 mm -Spindle speeds: 12 - 1650 rpm -Three-jaw chuck: Röhm Ø 250 mm -Tailstock mount: MK3 -Drive: 2.2 kW -Accessories included, see photos -Dimensions: 2670/900/H1355 mm -Weight: 1460 kg

Condition: new, turning diameter over bed 250 mm turning diameter over slide rest 140 mm turning length 550 mm turning speeds 50 - 2000 U/min centre height 125 mm spindle bore 26 mm tailstock quill taper MT 2 MK tailstock quill stroke 65 mm connected load frequency 230 V total power requirement 1,1 kW weight of the machine ca. 0,15 t dimensions of the machine ca. 1,3 x 0,6 x 1,3 m Benchtop lathe with base cabinet 3-axis LCD digital display system fully assembled. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Bjdpfeupxpmex Amreln Clock for thread cutting. Drip tray Hardened bed tracks. Emergency stop switch. Forage protection Set of wheels. Appropriate tools.

Condition: used, Year of construction: 1984, functionality: fully functional, overall weight: 2,300 kg, We offer this used Prvomajska BRT50M turret lathe, manufactured in 1984. It is in good working condition. Bodpfsz Hma Eex Amreln If you have any questions or require additional information, please send us a message or contact us by phone.

Condition: good (used), Year of construction: 1999, Ref. -No.: 10365 Manufacturer: MONFORTS Type: KNC 8 S - 3000 Year of construction: 1999 Type of control: CNC-Steuerung Control: MTC K Storage location: Halberstadt Country of origin: Deutschland Machine-No.: 178.05 X stroke: 455 mm Bjdpszx Nxdsfx Amrjln Z - stroke: 2850 mm Chuck diameter: 315/400/500 mm Centre Distance: 3000 mm Feed Capacity - Z: 23,9 kN Feed Capacity - X: 11,3 kN Rapid Travel Speed X-Axis: 6,8 m / min Rapid Travel Speed Z-Axis: 4 m / min Circumferential diameter over radial slide: 540 mm Max swing diameter: 830 mm travel of the cross slide: 450 mm Spindle head max. passage for violent material: 88 mm Spindle head max. passage for bare material: 90 mm Tailstock outside diameter of the quill: 125 mm Tailstock maximum quill stroke: 200 mm Tailstock inner cone: MK6 Type hydraulic tank: 15 L. coolant reservoir: 220 L. Coolant tank at chip conveyor: 160 L. Machine length: 5200 mm Machine width: 2110 mm Machine Height: 1995 mm Weight Of The Machine Ca.: 6,850 (Ohne Späneförderer und Kühlmittelbehäter) t Headstock Spindle Head: DIN 55027 - 11x290 Further information: Additional lubricating oil tank approx. 6l incl. tools Machine is under power and can be inspected by arrangement.

Condition: new, Year of construction: 2025, Ref. -No.: 10461 Manufacturer: IGREK Type: DT 4000 Year of construction: 2025 Type of control: CNC-Steuerung Control: SIEMENS SINUMERIK 840D SL Storage location: Istanbul Country of origin: Türkiye Spindle Speeds: 4000 RPM Turning Height: 2000 mm Table Diameter: 4000 mm Spindle power: 37 kW Max. Table load: 40 t Rotate table rotation speed: 60 RPM Max. Turning diameter: 5000 mm Max. Turning height over faceplate: 2000 mm Max Spindle Torque: 1200 Nm Spindle Taper: ISO 50 Machine length: 7500 mm Machine width: 12000 mm Machine Height: 9500 mm Bljdpsxmd Suefx Amren Weight Of The Machine Ca.: 125 t Further information: Ram Slide Stroke: 2100 mm Ram Section: 350 x 350 mm Vertical Travel of the Moving Traverse: 2000 mm Table Drive System: Segmented Direct Drive Motors Table Torque: 8200 Nm - 14400 Nm max. Table Guide System: Hydrostatic Bearing and Guides IGREK DT 4000 – Your solution for precise heavy-duty machining The IGREK DT 4000 is a state-of-the-art CNC vertical turning center designed specifically for the precise machining of large components. Equipped with a 4,000 mm hydrostatic rotary table and a movable crossbeam, it enables the efficient machining of workpieces with a maximum turning diameter of 5,000 mm and a turning height of up to 2,000 mm. Key features: Hydrostatic rotary table: The 4,000 mm rotary table with hydrostatic bearing ensures maximum precision and smooth running when machining heavy workpieces. Movable crossbeam: The vertically movable crossbeam with a stroke of 2,000 mm offers flexibility and allows adaptation to different workpiece heights. Powerful spindle: With a spindle speed of up to 4,000 rpm and a power of 37 kW, the machine is designed for demanding machining tasks. High load capacity: The rotary table can accommodate workpieces weighing up to 40 tons, enabling the machining of large and heavy components. Multifunctional machining: Thanks to the live spindle and the precise positioning of the C-axis, milling and drilling operations are possible in addition to turning, which increases the versatility of the machine. The IGREK DT 4000 combines advanced technology with high performance and flexibility to meet the requirements of modern manufacturing processes. Its robust construction and wide range of machining options make it the ideal solution for the precise machining of large components in various industries.

Condition: good (used), Year of construction: 1998, Ref. -No.: 10548 Manufacturer: MONFORTS Type: RNC 5 A17 Year of construction: 1998 Type of control: CNC-Steuerung Control: Monforts Storage location: Halberstadt Country of origin: Germany Machine-No.: 303XXXX Chuck diameter: 250 mm Centre Distance: 1080 mm Spindle Diameter In Front Bearing: 100 mm Spindle head according to DIN 55027 (size): Gr. 8 Circumferential diameter over radial slide: 290 mm Max swing diameter: 500 mm travel of the cross slide: 265 mm Tailstock outside diameter of the quill: 80 mm Tailstock maximum quill stroke: 160 mm Tailstock inner cone: MK 5 Type Material flow max.: 70 mm Turning Speed Range: 2 - 2800 rpm Further information: The machine can be viewed under power by arrangement. Bsdpfx Aoxmd T Eemrjln

Condition: good (used), Year of construction: 1970, Ref. -No.: 10575 Manufacturer: VDF BOEHRINGER Type: T 11 Year of construction: 1970 Type of control: Konventionell Control: n/a Blsdpfoxmd Uvex Amron Storage location: Halberstadt Country of origin: Germany Machine-No.: 40XXX Turning Diameter: Ø 700 mm Turning Length: 3000 mm Spindle Diameter: Ø 750 mm Spindle Bore: 70 mm Swing diameter over cross slide: Ø 450 mm

Condition: good (used), Year of construction: 2002, Ref. -No.: 10434 Manufacturer: OKUMA Bedpszkpu Nefx Amroln Type: LC 40 Year of construction: 2002 Type of control: CNC-Steuerung Control: FANUC 18-i TB Storage location: Halberstadt Country of origin: Germany Turning Speeds: 10 - 2.800 RPM Bar passage: 91 mm Chuck diameter: 450 mm Tailstock - diameter: 120 mm Turning Diameter: 550 mm Turning Length: 800 mm Swing Diameter: 800 mm Spindle passage: 90 mm Spindle nose: A2-8 Tailstock Quill Stroke: 150 mm Total Power Requirement: 44 kW Weight Of The Machine Ca.: 8 t Number of tool stations: 12 pc

Condition: repair required (used), Year of construction: 2005, functionality: not functional, machine/vehicle number: LZ1R0725, Technical specifications: Work Area - Maximum turning diameter: 89 mm - Maximum workpiece length: 80 mm - Chuck size: 152 mm hydraulic - Maximum workpiece weight: 0.7 kg (per piece, 2 pieces) - X-axis travel: 245 mm / Rapid traverse X: 20 m/min - Z-axis travel: 240 mm / Rapid traverse Z: 24 m/min Main Spindle Blodpfexxkn Tsx Amrjn - Spindle nose: ASA 6 - Maximum speed: 60–6000 rpm - Power at 100% duty cycle: 7.5 / 5.5 kW Tool Turret with Motorised Tools - Tool interface: 20 mm square / 25 mm hole diameter - Number of positions: 12-station lower turret, 6 driven stations - Max. speed: 4500 rpm, Milling motor power: 4.5 kW - Turret index time: 0.2 sec Electrical Equipment - Operating voltage: 200V (3-phase) - Connected load: 21 kVA Dimensions - Machine size (L×W×H): 2,100 × 1,555 × 1,680 mm - Weight: 4000 kg Main Features and Capabilities - Horizontal layout: Optimum chip evacuation, parts catcher, custom-made parts conveyor belt - CNC control: Fanuc Series 21i TB - Chip conveyor Machine Status: NOT WORKING - Servo drive defective - Main spindle motor defective

Condition: used, Year of construction: 2016, functionality: limited functionality, machine/vehicle number: MW127, Technical characteristics: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse Z: 24 m/min Main Spindle - Spindle nose: A2-8 - Max. speed: Left spindle 3000 rpm - Power at 100% duty cycle: Left spindle - 15 kW / Right spindle - 7.5 kW - Max. swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle - 80 mm / Right spindle - 53 mm Counter-Spindle: - Spindle speed: 6000 rpm - Max. bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Tool Holder with Driven Tools - Tool interface: Okuma interface - Number of tool stations: 12-position lower turret, all positions driven - Max. speed: 4500 rpm / Milling motor power: 4.5 kW Electrical Equipment - Operating voltage: 400V 3-phase, fused at 151A - Connected load: 22.5 kVA Machine Dimensions - Dimensions (L×W×H): 3200 × 2200 × 1900 mm - Weight: 5500 kg Main Features and Capabilities - Horizontal design: optimized chip evacuation, parts catcher and custom-made parts conveyor - Additional emulsion tank with 10 bar pressure for cutting tool cooling - CNC control: OSP-P300L-R - Chip conveyor - Fire protection system - Tool measuring system (Q Setter) Bledpjxxihfefx Amron - Broken tool detection: Load force auto-learning analyzer controlled by OSP-P300L-R - Part detection at counter spindle: low-pressure compressed air gauges - Spindle cooling system - Documentation: Available electronically and in printed format Machine Status: Currently operating with main spindle only - sub spindle requires repair OPTIONAL: Bar feeder: TopAutomazione model Fu352 SX - Bar feeder dimensions (L×W×H): 3500 × 800 × 1200 mm - Weight: 1500 kg

Condition: used, 1 used, partially overhauled universal milling head, System "HURON" Mount ISO 40 Overhang 300 mm Centering flange diameter 125 mm Rated drive power 10 HP Max. speed 1800 rpm Milling head dimensions L x W x H approx. 375 x 245 x 300 mm Blsdpfxez Adz Uj Amren Weight approx. 80 kg Accessories / Special features: • Manual tool clamping • 2 axes that can rotate relative to each other, allowing any setting angle! System "HURON" • Tapered interfaces are manufactured according to the "KLINGELBERG" system • The main spindle's roller bearings consist of tapered high-precision rollers • 1 tool clamping screw The spindle and gear bearings have been completely renewed! Design: standard, for retrofitting to conventional, NC or CNC milling machines or drilling machines of any type Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 2020, operating hours: 426 h, functionality: unexamined, machine/vehicle number: 1, spindle bore: 65 mm, spindle motor power: 18 W, rotational speed (max.): 4,500 rpm, total height: 1,700 mm, total length: 2,800 mm, total width: 20,001,700 mm, type of input current: DC, overall weight: 3,700 kg, swing diameter over bed slide: 600 mm, distance table center to spindle nose: 590 mm, spindle nose: 65, For the 2020 GT2100 Plus series, the screen-on time is 1260 operating hours, with 427 hours of active use. Bljdpfxsz Hc Tzo Amron

Year of construction: 1988, condition: used, Rated current: 25A, control voltage: 24V, operating voltage: 380V, control: DECKEL Dialog 2, weight: approx. 1.8t, without clamping systems or tools, Z-axis scale defective, screen display partially incorrect, not operational, an on-site inspection is possible. Bedpfx Amsz Ea Sfjreln

Year of construction: 1998, condition: used, A CNC lathe with bar feeder is offered. Equipped with an IRCO Breuning PROFImat bar feeder and KNOLL 400 S - 1/200 chip conveyor. Control: INDEX C200-4D / Siemens SINUMERIK 840C. Condition: in need of repair, maintenance required. Hoses and guide channels of the bar feeder are defective. The emergency stop currently cannot be reset. The oil pressure/air pressure switch trips the circuit breaker. Inspection possible by appointment. Bedpfx Ajz Hzdxjmrsln

Year of construction: 1997, condition: used, A compact CNC lathe is offered. Control: Siemens. Condition: defective. Turret enable signal is missing. Inspection possible by appointment. Bljdpfx Amoz Hzd Esren