Used Universal Lathe for sale (8,521)

Year of construction: 2007, condition: used, Offered for sale is a CNC lathe with tool turret. Technical specifications: Machine operating hours: approx. 20000h, main spindle bearings replaced at approx. 16000 machine operating hours. Control system: Heidenhain CNC control. Equipped with tool turret, tailstock, various clamping tools, tool holders, collets and additional tools as well as chip conveyor. Inspection possible by arrangement. Hnjdpfx Aoz N Halsiteu

Condition: used, Year of construction: 1997, CNC Turning Center VDF Boehringer VDF 250 Cm (NO TAILSTOCK) General Manufacturer: VDF Boehringer Model: VDF 250 Cm Type: CNC slant bed turning center, chuck work Year: 1997 Hnodpfx Aisz Rnrrjtou Serial no.: 1114.3705-24 Control: Siemens Sinumerik 840C Location: Korschenbroich, Germany Working area Swing over bed: 550 mm Swing over cross slide: 480 mm Max. turning length: 1,000 mm Tailstock: none (chuck work only) Main spindle Spindle nose: size 8, DIN 55026 Spindle bore: 103 mm Max. speed: 4,500 rpm C-axis: yes Axes X travel: 405 mm Z travel: 1,099 mm Rapid traverse: 10 m/min Feed range: 0.1 to 10,000 mm/min Turret 12 stations, VDI 50 (DIN 69880) Driven tools: yes, up to 2,500 rpm, 5.4 kW Driven tool torque: 25 Nm (standard), 100 Nm (low range) Clamping Hydraulic power chuck, special swivel chuck (Sonderschwenkfutter) Full hydraulic clamping cylinder Equipment Coolant system: 600 l tank, 5.5 bar, 60 l/min Chip conveyor: right-hand discharge Hydraulic unit: Hydrokraft Control cabinet: Rittal, with cooling unit Oil mist extractor: yes Pivoting operator panel Electrical 400 V, 3 phase, 50 Hz Main fuse: 125 A Operating current: 100 A Total connected load: approx. 50 kW Dimensions and weight Approx. 5,400 x 3,200 x 2,400 mm (L x W x H) Weight: approx. 10,500 kg Points to check before sending: Weight. The other listing says about 11,000 kg. I used 10,500 kg because that is what is written on the machine (“10,5 to.”). Chuck make. The listing names a Forkardt chuck. The marking on the chuck in your second photo looked like it could be Röhm, so it’s worth a quick look. resale Chip conveyor. It is not visible in the photos. Confirm it is with the machine. Control model. The 840C comes from the listing only. The screen photo doesn’t show it clearly.

Condition: like new (used), Year of construction: 2015, functionality: fully functional, turning diameter over cross slide: 160 mm, spindle bore: 43 mm, turning diameter: 330 mm, center height: 165 mm, center width: 750 mm, turning length: 750 mm, quill stroke: 110 mm, total length: 1,800 mm, total width: 1,200 mm, total height: 1,650 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 1 rpm, overall weight: 1,250 kg, Conventional precision lathe, control WEILER C3/Sinumerik 840D, center high 165 mm, between centers 750 mm, bore Ø 43 mm, speed 1 - 4500 rpm stepless, motor 9 kw, equipement: collet device, coolant device, 3-jaws chuck SCHUNK, drill chuck, tool post MULTIFIX with 6 toolholders, lamp, dimensions 180x120x165 cm, weight ca. 1250 kgs; only a few working hours Hedpfxjz Rpmqe Aitjnu

Condition: used, Year of construction: 1997, CNC lathe, cycle-controlled Manufacturer: VDF Boehringer Type: DUS 560 Year of manufacture: 1997 Control: CNC Plus Swing diameter over bed, max.: 570 mm Turning length: 1,000 mm Spindle head, size 8 according to DIN 55027 Toolholder cross-section H/W, max.: 32 x 25 mm Thread pitch: 0.1 – 400 mm Spindle speed: Gear stage 1: Speed range from 3 to 500, stepless Gear stage 2: Speed range from 15 to 2,500, stepless Speed: Main drive: 8,000 min⁻¹ Feed drive X: 2,000 min⁻¹ Feed drive Z: 2,000 min⁻¹ Tailstock: Arbor taper: MK 5 Tailstock travel, manual Feed rate: longitudinal, max.: 10 m/min Hnsdpfxez N Ew Ns Aitou radial, max.: 5 m/min automatic feeds: longitudinal + radial 0.01 – 50 Feed force, max.: longitudinal 12.5 kN Main drive: 50/21 kW Voltage: 400 V / 50 Hz Total connected load: 50 kVA Accessories: Coolant pump Brinkmann, 47 l/min at 0.2 bar Manual chuck Forkardt F 250 Parat quick-change tool holder Weight approx.: 4,000 kg Space requirement L/W/H: 3,150 x 1,800 x 1,800 mm 121026ä

Condition: good (used), Year of construction: 2012, CNC turning/milling center Spinner Type/Model TC 600 52 Control Siemens Sinumerik 840D sl; with SHOPTURN Condition Used Year of manufacture 2012 Technical data Max. swing diameter 600 mm Max. turning diameter 400 mm Max. turning length 650 mm Travel X/Y 275 mm / 700 mm Max. rapid traverse X/Z 15 / 24 Turning spindle Max. speed 5,000 rpm Chuck size 210 mm Spindle power 18 kW Max. torque 113 Nm Spindle nose A6 Max. bar diameter 52 mm Turret Tool positions 16 Tool holder VDI 30 / DIN 69880 Tailstock taper MT 4 Machine dimensions (L x W x H) approx. 2500 x 1600 x 2000 mm Machine weight approx. approx. 5,000 kg Equipment / Features Tool measuring arm Power chuck SMW Autoblok BH-D 210-52-3-A06 including jaw sets Chip conveyor TC600 Hnjdpsz H If Nsfx Aiteu Enlarged, L-shaped coolant tank, approx. 180 liters with centrifugal pump 50 l/min; 3.3 bar Foot switch for CNC tailstock Inquiry item: Transportation costs in a separate quote.

Condition: used, Year of construction: 2015, operating hours: 19,517 h, functionality: fully functional, machine/vehicle number: 1220099199, Elumatec SBZ 122/64 CNC machining centre for aluminium and PVC profiles. Made in Germany, 12/2015. Fully functional, currently in production. Inspection under power on site or via live video. Hnsdpfx Aiez Ruzgjtju Spindle: 22,000 rpm Power: 21 kW, 400 V, 50/60 Hz Air: 7 bar Machine hours: approx. 19,500 h Spindle hours: approx. 4,390 h Pneumatic clamps, safety light barriers

Condition: used, Year of construction: 2006, We are offering this used Okuma LU300-M CNC turning machine, manufactured in 2006. Hjdpfxez Rwfuo Aitjnu Manufacturer: Okuma Model: LU300-M Year of manufacture: 2006 Date of production: 11/2006 Serial number: 126842 Condition: used Machine category ID: 1182 Machine type ID: 190 Machine type: CNC turning machine If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 135xxx, Equipment: documentation/manual, We are offering this very well-maintained Okuma CNC lathe, manufactured in 2008. Hnjdpfoz I Sv Isx Aitou Manufacturer: Okuma Year of manufacture: 2008 Machine type: CNC lathe Accessories: Chip conveyor, extraction system, tool holders (available at an additional cost) If you have any questions or require further information, please feel free to send us a message or call us.

Condition: like new (used), Year of construction: 2024, MAZAK QUICK TURN 200MSY Max. machining diameter: 380 mm Max. machining length: 575 mm Max. milling speed: 5,000 rpm Max. spindle speed: 5,000 rpm Max. bar diameter: 65 mm Hodpfx Aijzgw Icstenu Machine is equipped with: - CNC control: Mazatrol SmoothG - Hydraulic KITAGAWA 3-jaw chuck BB-208 for main spindle, diameter 210 mm - Hydraulic KITAGAWA 3-jaw chuck B-206 for 2nd spindle, diameter 169 mm - Tool Eye - C-axis - C-axis counter-spindle, input accuracy 0.0001° - Y-axis - Interface for bar feeder - Automatic parts catcher - Robot interface - Reinforced coolant pump - MAYFRAN chip conveyor - 8 pcs. fixed tool holders - 2 pcs. driven tool holders

Condition: good (used), Hwacheon HI Eco 31A CNC Lathe, C Axis & Live Tools, Serial Number 1053444L45, Year 1998, Swarf Conveyor, Foot Pedal, Fanuc CNC Control, Hjdpfx Aiez N A Avstsnu 2 Jaw & 3 Jaw Power Chucks, Tool Arm, Tailstock, 10 Station Turret, Manuals, Toolholders, Transformer

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Working area X: 3600 mm Working area Y: 2200 mm 4-axis electrospindle, HSK 36F shank Vertical drilling bits: 12 Horizontal drilling bits X: 4 Horizontal drilling bits Y: 2 Blade for grooving in the X direction Linear tool changer with 20 positions Nesting worktable Software: Xilog Plus and Maestro CNC Control panel 2 vacuum pumps, 250 m3/h each Approximate weight: 5000 kg Includes 1 unit with 2 outlets and 6 suction cups Includes Maestro FreeForm nesting Hedpfx Ajzwc Nmsitsnu Available: January 2027

Condition: used, Year of construction: 2017, Control Heidenhain TNC 640 x-travel 600 mm Hjdpfx Aioz Ic Afjtsnu y-travel 450 mm z-travel 450 mm b-axis ° c-axis 360 ° spindle tunring speed 20.000 U/min Drive power at S1/S6 (40% duty cycle) 23/36 kW Torque at S1/S6 (40% duty cycle) 77/120 Nm tool taper HSK-A63 number of tool places 170 Pos. tool changing time

Condition: good (used), Year of construction: 1989, CNC turning machine WEILER Primus 2 CNC, serial number 160, CNC Bosch. Hodpfjz R R E Njx Aitsnu

Condition: good (used), CNC turning machine WEILER DZ42 CNC. Year of manufacture 2001, serial number 173, CNC Siemens 840C, machine weight approximately 3,800 kg, with bar feeder HATEC AM9. Hnsdpfoz R R Htex Aitou

Condition: good (used), 1 x lathe from Hamburg 430 --- 1 x lathe from WEIPERT 425 --- 1 x lathe from VDF Hodpfxjz Smtlo Aitsnu

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, turning length: 500 mm, spindle speed (max.): 8,000 rpm, spindle speed (min.): 50 rpm, spindle bore: 26 mm, bar diameter (max.): 26 mm, operating pressure: 60 bar, Machine in production under power, no defects, can be inspected in production. Equipement: - 2x spindle - 2x C axsis - live tools for main and sub spindle - swarf coveyour - Iemca bar feeder - high pressure pump Hjdpfxjz Smfuo Aitonu - Siemens controller - all books and manuals

Condition: refurbished (used), Year of construction: 2012, operating hours: 38,984 h, functionality: fully functional, machine/vehicle number: 06860001401, Swing diameter: 320 mm Automatic workpiece feeder Chip conveyor High pressure cooling system with paper filter Hnsdpfek Ny R Dex Aitju The price contains the machine itself, the cost of unassembly and the loading on truck. Every other cost on your side.

Condition: like new (used), Year of construction: 2021, operating hours: 4,393 h, functionality: fully functional, machine/vehicle number: S4E213351, turning diameter over cross slide: 300 mm, turning length: 670 mm, turning diameter: 430 mm, spindle bore: 45 mm, spindle speed (max.): 6,300 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 510 mm, spindle motor power: 13,000 W, total height: 1,960 mm, total length: 2,575 mm, total width: 1,760 mm, type of input current: three-phase, overall weight: 3,300 kg, Equipment: documentation/manual, rotational speed infinitely variable, NEW: EMCO EMCOTURN E45 (year 2021) CNC lathe – FANUC 0i-TF, 4,393 hours, like new! Includes a parts collection device for removing finished parts. • Manufacturer: EMCO (Made in Austria) • Model: EMCOTURN E45 • Year of manufacture: 2021 • Serial number: S4E213351 • Control system: FANUC 0i-TF incl. manual control wheel • Operating hours: 4,393 hours (see image 263.599 minutes = 4,393 hours) • Machine type: Single-spindle lathe with parts collection device • Number of tool positions: 12-position VDI-30 axial turret with two hole circles • Condition: like new, fully functional • Location: Graz • Availability: Immediately available from stock • PICTURES/VIDEOS: Further pictures and videos of the running machine will be sent upon request. _____ Item description For sale is a high-precision CNC turning center, EMCO EMCOTURN E45, manufactured in 2021, with low operating hours of only 4,393 and in very good condition. Special features: • Control system: Modern FANUC 0i-TF control system for easy programming, including handwheel. • Parts collection device: The parts collection device (parts catcher) of the Emco Emcoturn E45 carefully transports finished workpieces out of the working area and automatically drops them into a finished parts container. • Powerful main drive: Single-spindle configuration with 13 kW drive power and a maximum speed of 6,300 rpm. • Tool changer: Fast 12-position axial turret (VDI 30) with a turret indexing time of only 0.14 seconds. • Quality components: High-quality, robust control cabinet from RITTAL for maximum reliability of the electronics. _____ Technical data: Working area and travel distances: • Swinging diameter over bed: 430 mm • Swinging diameter over cross slide: 300 mm • Distance between centers (spindle nose - tailstock center): 670 mm • Max. turning diameter with axial turret: 220 mm • Max. part length: 480 mm • Max. bar diameter: Ø 45 mm • Slide travel (X / Z): 160 / 510 mm Hnodpfx Aszkhuhjitou Main spindle and drive: • Speed range: 0 – 6,300 rpm • Main spindle drive power: 13 kW • Torque at the spindle: 78 Nm • Spindle connection: DIN 55026 KK 5 • Spindle bearing (inner diameter) / spindle bore: 80 mm / 53 mm Tool turret (axial VDI 30): • Number of tool positions: 12-position VDI-30 axial turret with two hole circles • Mounting shank according to VDI (DIN 69880): VDI 30 • Tool section for square tools: 20 x 20 mm • Shank diameter for drilling bars: Ø 32 mm • Turret indexing time: 0.14 sec Feed drives and accuracy: • Rapid traverse speed (X / Z): 24 / 30 m/min • Feed force (X / Z): 4,000 N / 6,000 N • Acceleration time from 0 to rapid traverse (X / Z): 0.1 sec • Positioning accuracy according to VDI 3441 (X / Z): 2 / 2 µm _____ Scope of delivery & terms of sale: • CNC lathe EMCO EMCOTURN E45 • Tools: The tools shown in the pictures are included. • FANUC operating manuals and machine documentation • Loading by forklift on site is included. The machine is immediately available and can be inspected and tested under power after prior arrangement. Subject to prior sale and errors.

Year of construction: 2007, condition: used, X-axis: 260mm, Y-axis: 100mm (±50mm), Z1-/Z2-axis: 800/800mm, swing diameter over bed: 660mm, swing diameter over cross slide: 540mm, distance between spindle noses: 1050mm, max. turning diameter: 500mm, max. workpiece length: 1000mm, max. bar capacity: 65mm, spindle speed: 0-5,000rpm, torque: 25Nm, drive power: 6.7kW, number of driven tools: 12, number of tool stations: 12, shank diameter for boring bars: 40mm, tool change time: 0.7s, speed range of driven tools: 0-12,000rpm, torque of driven tools: 30Nm, drive power of driven tools: 10kW, compressed air connection: 6bar, connected load: 40kVA, control: Sinumerik 810D PCU20, length: 3320mm, width: 2070mm, height: 2341mm, total weight: 8.45t, operating hours: 89,129h, with documentation and service reports, regularly maintained. An on-site inspection is possible. Hsdjz Sr Nwopfx Aitenu

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, MAZAK QUICK TURN NEXUS 100-II Max. machining diameter: 280 mm Max. machining length: 300 mm Max. spindle speed: 6,000 rpm Max. bar diameter: 42 mm The machine is equipped with: - CNC control system: Mazatrol Matrix - KITAGAWA 3-jaw chuck BB-06, diameter 169 mm - Tool Eye - Interface for bar feeder - Automatic parts catcher Hjdszv D H Rjpfx Aitonu - NC tailstock - Reinforced coolant pump - Chip conveyor, discharge to the side - 1 set of tool holders for a 12-position turret

Condition: used, functionality: fully functional, machine/vehicle number: 3988, total width: 450 mm, total length: 2,500 mm, total height: 1,000 mm, overall weight: 200 kg, turning length: 1,300 mm, MVM Capri T.1500 Heavy-duty – Professional machine Lathe in a robust design with a convenient copying mechanism Hedpfx Aijz R Abzotenu Table extension up to 230 cm 4 speeds Left-right rotation Copying mechanism with handwheel Various tool rests Accessories (chuck, discs, etc.) 6 lathe tools READY FOR USE Price negotiable / VAT can be shown separately

Condition: good (used), Year of construction: 2001, functionality: fully functional, DECKEL MAHO DMU 60 T – CNC Universal Machining Center – 2001 Manufacturer: DECKEL MAHO Model: DMU 60 T Year of manufacture: 2001 Condition: Used CNC control: HEIDENHAIN Machine type: CNC Universal Machining Center Technical specifications Machine dimensions (L × W × H): 2,900 × 2,200 × 2,900 mm Machine weight: approx. 6,500 kg CNC control: HEIDENHAIN Rotary table Automatic tool changer Enclosed machining area Accessories Tool holders and cutting tools shown in the photographs (inclusion in delivery to be confirmed) Rotary table Automatic tool magazine Hnsdpfx Aiez R D R Doteu Description Used DECKEL MAHO DMU 60 T CNC universal machining center, manufactured in 2001, equipped with HEIDENHAIN CNC control and a rotary table. The machine is suitable for universal milling, toolmaking, and precision machining applications. The machine is offered with photographic documentation. Further technical details, availability, and the scope of delivery can be provided upon request.

Condition: not inspected (used), CNC universal milling machine, manufacturer: MAHO, type: MH700 C, serial number: 76730, year of manufacture: 1984, screen control, manufacturer: Maho, type: CNC 432, tool holder: SK 40, table size: 800 x 520 mm, coolant system, lamp. Hedpez R Na Ejfx Aitonu

Condition: refurbished (used), functionality: fully functional, Weiler Primus lathe with lead screw and drive spindle. Includes tailstock. The machine can be inspected while powered on prior to purchase. Shipping is possible for an additional charge. VAT can be shown separately. Hnsdpfoz Nh Epjx Aitju

Condition: used, Year of construction: 1976, turning diameter over bed 0560 mm turning diameter over slide rest 350 mm Hnedst Tqgxopfx Aitju turning length 1500 mm spindle bore 62 mm spindle turning speed range 16- 1250 U/min feeds - longitudinal 0,050-24,0 mm/U feeds - cross 0,039-18,86 mm/U dimensions of the machine ca. 3,5 x 1,6 x 1,7 m total power requirement 9 kW weight of the machine ca. 4,5 t Machine has a 4 position tool holder, a three jaw chuck, a rotating center and a taper gauge.