Used Ultrasonic Cleaning System for sale (6,091)

Condition: new, functionality: fully functional, total length: 1,200 mm, total height: 2,100 mm, total width: 2,500 mm, empty load weight: 750 kg, input voltage: 400 V, water tank capacity: 400 l, warranty duration: 12 months, DPF DUO PREMIUM = CLEANING CABIN + DRYER FOR DPF/FAP FILTERS This set of devices allows for maximum optimization of the regeneration process. A well-organized operator can work with three filters simultaneously. Washes Dries Advantages of the DPF DUO Premium: -> A separate dryer doubles work efficiency -> We are the only ones to offer a large-diameter hose that connects to the DPF. A larger diameter = more water = more effective cleaning -> Our filter mounting system is free of elements placed inside the DPF filter tube that could block the water flow. This allows the full performance of the water and air pump to be utilized, shortening regeneration time. -> The large cabin provides the freedom to mount the cleaned filter. The operator, based on their experience, can choose the position in which the filter will be washed. Hnedsxm Szqspfx Ah Nsg -> Protection against excessive pressure in the filter during cleaning -> Protection against lack of airflow through the filter during drying -> Possibility to individually set the cleaning program according to the filter capacity -> Stable securing of the filter during drying -> Three-stage dirty water filtration system -> Water heating controller -> Insulated water tank -> Training at the customer's site can be provided The device enables the removal of soot and ash from DPF/FAP filters without negatively impacting the filter structure, restoring up to 99% of the nominal flow rate. Our technicians have dedicated significant effort to ensure that both the cleaning procedures and the detergents used are safe for the environment and machine operators. The operator checks the filter for mechanical damage using an endoscopic camera. If signs of melting, ceramic core cracks, or other apparent mechanical damage interfering with the DPF are detected, regeneration will not be possible. The regeneration process takes place in a closed chamber equipped with filters preventing harmful contaminants from escaping into the environment. Water with cleaning fluid circulates in a closed loop and is filtered throughout the process, significantly extending bath life. The DPF DUO Premium cleans filters using water, chemistry, and air. A precisely selected, computer-controlled sequence of water and detergent dosing, combined with air and impulses generated by compressed air, ensures high regeneration efficiency. After the cleaning process is complete, an additional device dries the filter with air at 90°C, ensuring complete evaporation of the cleaning solution. After drying, the machine performs a final backpressure measurement. This measurement can also be taken before cleaning, allowing subsequent comparison of backpressure values before and after the process. The device is equipped with a printer that allows generating a measurement report. The washing time for filters from passenger cars or light commercial vehicles is 20–40 minutes, which enables regeneration of up to a dozen filters in 8 hours. High efficiency combined with low operating costs guarantees a rapid return on investment.

Condition: new, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Great Support! ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 4-6 weeks after receipt of payment! Important note: If you would like to receive a quote for an automatic powder coating system, please use the powder coating system configurator on the homepage of our website. ✅✅✅Energy Class A+++✅✅✅ ➖➖➖➖➖ ✳️Maintain your liquidity! We offer a variety of financing models to ensure your investment has the greatest chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ➖➖➖➖➖ ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ ► Optimal adhesion begins with perfect preparation – Chemical pretreatment systems from PROTON◄ Before the paint can develop its full potential, the surface must be flawless. PROTON surface pretreatment systems ensure that every contaminant – be it oil, dirt, or oxide – is reliably removed. This is the only way to achieve lasting corrosion resistance and excellent paint adhesion. Each product requires a customized process. Whether alkaline or acid degreasing, iron or zinc phosphating, nanotechnology, or chrome-free processes – we develop customized solutions for your requirements. Our pretreatment systems – whether spray or immersion systems – offer you: ✳️ Maximum energy efficiency ✳️ Minimized chemical and water consumption ✳️ Precise process control with automatic dosing and pH monitoring ✳️ Durable construction made of chemical-resistant stainless steel or plastic Our promise: Customized technology for the highest demands Our experienced project team analyzes your production conditions in detail and recommends the optimally matched pretreatment system. We consider all crucial parameters – from heating power and water circulation to vapor deposition and chemical separation. The spray wash lines are seamlessly integrated into your conveyor system. All cleaning, rinsing, and drying processes are fully automated and efficient – ready for a perfect coating. Available systems: ✳️ Spray and dip pretreatment lines ✳️ Nanotechnology systems (e.g., Bonderite, Oxsilan) ✳️ Degreasing and pickling systems ✳️ Iron and zinc phosphating lines ✳️ Chromating and chrome-free systems Hsdskwct Ujpfx Ah Nong PROTON – Technology that convinces. Experience that works. ⭐Follow us for new campaigns⭐ ☀️ 2-YEAR WARRANTY ☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Year of construction: 2018, condition: ready for operation (used), Offered is a cleaning system for assemblies in electronics manufacturing: Functions: injection flooding with compressed-air support, vacuum drying, 100% recirculation (closed loop), MPC-cleaner compatible. Technical data: cleaning tank 80L, rinsing tanks 2x 60L. Stainless steel construction. Dimensions X/Y/Z: approx. 1600mm/1000mm/2000mm, weight: approx. 700kg, including operating manual, data sheet, CE declaration. Viewing possible by arrangement. Hnodpox Hff Eefx Ah Njg

Year of construction: 2025, operating hours: 1 h, condition: new, functionality: fully functional, - Laser slag cleaner for laser cutting machines Hnedpex E Srcefx Ah Nog - 1.1 kW motor - Video demonstrating working principle available

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, type of input current: three-phase, Elumatec VS 750 four-head welding machine with EV850 4-axis CNC cleaning line. The welding machine and cleaner are currently programmed only for SCHÜCO profiles. Profile height range for welding: 30-185 mm Minimum window dimensions for welding: 350 x 350 mm Maximum window dimensions for welding: 2600 x 4000 mm Weld bead limitation: 0.2 mm and 2 mm The welding machine features a touch operator panel based on Windows XP The cleaner is also equipped with an operator panel Online connection is available between the welding machine and the cleaner Hnsdpjx E Rd Dsfx Ah Neg After welding, automatic transport to the cleaner is provided The cleaner operates in both manual and automatic mode In automatic mode, the rotation station turns the window to each specific corner to be processed by the cleaner. We provide assistance with machine disassembly and loading for transport.

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, empty load weight: 1,500 kg, workpiece weight (max.): 750 kg, machine/vehicle number: F101, TECHNICAL DETAILS Pump output: 5.5 kW Heating element output: 4.2 kW Rotary basket load capacity: max. 750 kg Compressed air connection: max. 10 bar MACHINE DETAILS Hnedpfx Aoxztt Deh Nsg Unladen weight: approx. 1,500 kg Electrical connection Connection: 400 V Current consumption: 63 A Frequency: 50 Hz

Condition: excellent (used), Year of construction: 2011, The 2-axis WP CNC-T cleaning machine is an excellent example of a device that combines a machine built on the basis of the most modern components with high efficiency and the most favorable price. This machine operates on the basis of linear motor technology (magnetic cushion), allowing for long-term operation of the device. The set of tools with which the machine is equipped allows for cleaning the most common PVC profiles on the market. The basic machine is a strong, stable frame made of structural steel. The control panel is equipped with a PC computer. Basic equipment: Working arm: The working arm is driven by a linear motor (no clutches, gears, racks, lead screws). The linear motor moves at a set distance from the magnetic strip - no friction!! Linear motors (for the "X" and "Y" axes) are numerically controlled. Air cushion the working arm weighing several dozen kilos during the movement in the "Y" axis is supported by a pneumatic actuator - it constantly supplies pressure of a fixed value, which balances the weight of the arm. This solution allows for the use of short working times without the need to expose the machine components to the risk of rapid destruction. Control panel Hnsdpfewhu Hhsx Ah Njg Independent control panel with a PC computer The operator menu is described by function keys - ease of use in production conditions. from the control panel, you can easily make corrections to the outline of the profiles (it takes the operator about 1 to 2 minutes to make the correction) Other data: Automatic system for cleaning the working surface Automatic clamping and centering of the material Minimum and maximum height of the processed profile: 40 - 150 mm Minimum and maximum width of the processed profile: 40 - 130 mm Minimum size of elements: external 340x400 mm VP - transport packaging BASIC SET OF UPPER AGGREGATES: working unit for tools for cleaning flat surfaces with a groove working unit for cleaning the surface of the glazing bead groove drilling unit for the gasket BASIC SET OF LOWER AGGREGATES: working unit for tools for cleaning flat surfaces with a groove working unit for cleaning the surface of the glazing bevel drilling unit under the seal ADDITIONAL SET OF LOWER AND UPPER AGGREGATES: working unit with a knife for cleaning flat surfaces without a groove working unit with a knife for cleaning flat surfaces without a groove

Year of construction: 2023, operating hours: 50 h, condition: excellent (used), functionality: fully functional, number of tool turrets: 1, Note: This offer concerns the assignment of a leasing agreement. Pulsed cleaning laser Narran ROD 500W, equipped with an IPG Photonics source. The machine is in very good condition, with approximately 50 operating hours, used mainly for demonstrations. Technical data: - Average power: 500 W - Peak power: 2.5 MW - Wavelength: 1064–1070 nm - Frequency: 2–50 kHz - Fiber optic cable length: 10 m - Head weight: 1.5 kg - Dimensions: 1.4 x 0.6 x 1.1 m - Device weight: 195 kg - Rated power: 3.5 kW - Power supply: 220/230 V (16A) The following accessories are also included: - TBH LN 265 filter – high-performance extraction system with a compact and mobile design; - Extraction fan with hose and nozzles; - 6 pairs of special protective goggles for laser operation; - Interchangeable lenses for the working head; - 3M mask/face shield; - Protective partitions/separators to enclose the workspace; Hnedjx Ezw Ujpfx Ah Njg - Manuals in Polish and English, technical documentation (DTR) in Polish, and site-specific instructions; - Domain, website, and e-mail address. The listed price is the sum of the net principal leasing instalments, excluding additional costs, and is for informational purposes only. Offer does not include any transfer fee.

Condition: good (used), Year of construction: 2019, functionality: fully functional, total length: 1,650 mm, total width: 1,770 mm, total height: 1,580 mm, input voltage: 400 V, type of input current: three-phase, pressure: 5 bar, temperature: 75 °C, power: 15.4 kW (20.94 HP), maximum load weight: 350 kg, workpiece weight (max.): 350 kg, cage diameter: 1,100 mm, TRL 1100 - 2021 - € 8,500 Industrial washing machine for cleaning and degreasing workpieces using an alkaline cleaning agent. The machine is constructed entirely from stainless steel AISI 1.4301. Equipped with double walls with insulation in between. Rotating basket for parts, with spray nozzles for detergent above and below. Built-in filter for coarse contaminants. Fitted with a detergent pump and a drain pump to remove the used cleaning liquid. Level switches in the tank to detect fluid level. Monitoring of possible leaks. Control cabinet with digital temperature display. Cabinet fitted with a signal lamp for status indication. The machine is in very good condition and is ready for immediate use. Hnjdpfx Ahswfdpmo Nog

Condition: excellent (used), Rosink RFL Front Loader - Powerful water-based cleaning - Modular system - Cleaning of tall and long components - Easy operation, compact design - Low-maintenance operation - Base unit in stainless steel - Environmentally friendly Concept With the Rosink RFL front loader, we offer you an economical and user-friendly solution – especially suitable for cleaning tall components. The proven Rosink cleaning technology and the highest quality are thus combined in one system. The system is based on a single-bath system, standard with a rotary table, which can be expanded to a multi-bath system upon request. Within the wash chamber, various programs can run depending on the configuration and requirements, such as washing, rinsing, drying, etc. Features Basic unit in stainless steel 1.4301 Tank with sloping bottom Tanks and wash chamber including cladding and insulation Rotary drive with 4-point bearing Pneumatic lifting door with two-hand safety operation Transport trolley or loading table with stainless steel 1.4301 drip tray Pre-filtration via return filter baskets with usable height Selectable filter element: 200 μm or 500 μm Operating panel at the front with PLC for control (5 programs storable) Flat jet nozzle system entirely in stainless steel 1.4301 Automatic refilling system with bath level control Maintenance and inspection hatches for wash and rinse tanks Technical Data RFL 1650, variable depending on configuration Width: 2900 mm Height closed/open: 2800/4500 mm Depth without/with transport trolley: 2650/4500 mm Grid load capacity: 1000 kg Grid dimensions: 1320 x 1320 mm Grid diagonal: 1650 mm Connection voltage: 400 V, 50 Hz, 3Ph/N/PE Control voltage: 24 V / DC Washing capacity: 750 l Rinsing capacity: 500 l Pump capacity (washing): 7.5 kW at 630 l/min at 4.5 bar Pump capacity (rinsing): 4 kW at 250 l/min at 5.5 bar Drying capacity: 12 kW Hjdpfx Ahjx Exuqs Njng Heating capacity (cleaner): 36 kW Heating capacity (rinsing): 27 kW Weight: 3600 kg Find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, lowering unit for ultrasonic welding machines, lowering unit - flatbed, lowering column -Manufacturer: Nucleus, Absen column 35 for ultrasonic welding machines -Eco FR361101 Hnedpfxjxzb E Io Ah Neg -Servo motor: Dunkermotoren GR 42x40, voltage 24 V -Receiver: Shaft Ø 20 x 18 mm see photo -Number: 4x lowering unit available -Price: per piece -Dimensions: 250/220/H85 mm -Weight: 2.3 kg/pc.

Condition: used, functionality: fully functional, machine/vehicle number: 224088, Cleaning systems for the cleaning of assembled PCBs, including a backup deionized water treatment unit, leftover liquid cleaner, powder cleaner, and activator. Hnjdpfx Ahsx Eiv Ns Nog

Condition: excellent (used), Year of construction: 2005, CNC corner cleaner with modern drive using linear motors Hnodpfowh R Tkex Ah Neg Corner centering from the outside of the window Profile programming is based on a graphical interface after entering profile drawings in graphic format Tool movements with NC curves facilitate the creation and editing of programs possibility of installing up to 19 tools disc milling machine unit freely programmable operator panel with 17-inch TFT monitor and keyboard Windows operating system Positioning via linear motors profile height 45-130mm (optionally 180mm) profile width 50-130mm min. size of window opening outwards 320x320

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Manufacturer: Herrmann, Ultrasonic welding transducer, ultrasonic vibration unit -Welding transformer: Type KHS20-IP50-L -Horn/Ultrasonic Sonotrode: Type 400 see photos -Number: 3x ultrasound transducer units available -Dimensions: 450/100/H70 mm -Weight: 4.8 kg/pc. Hedpfoxyw H Ejx Ah Neng

Condition: excellent (used), Year of construction: 2006, Urban SV 530 + WT 530 Hnedswrpxtepfx Ah Neg The machine has undergone a professional mechanical service. Ready for work.I will send a video of the machine working on whatsapp.

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Manufacturer: Herrmann, Ultrasonic welding transducer, ultrasonic vibration unit -Welding transformer: Type KHS20-IP50-L -Horn/Ultrasonic Sonotrode: Type 118.858/1 see photos -Quantity: 1x ultrasound transducer available -Dimensions: 450/260/H70 mm -Weight: 7.8 kg Hnedpfx Ajxyw Eneh Nog

Condition: excellent (used), Year of construction: 2000, Welding and cleaning line GRAF, year 2010 The direction of work from left to right Welder four-head SL4Q, max. welding dimension 2800 x 3200 mm, 0.2 mm flash, gasket formates Cooling station WPCNC4 4-axis cleaner with a turning station, equipped with knives for cleaning flat surfaces with a groove and smooth Hodpowrpwijfx Ah Nong The line was servised in the end of 2022 y. with part replacement for over 10000 Euro (total cost of service). It is in very good condition. Currently is working.

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Ultrasonic sweat transducer: Ultrasonic vibration unit -Welding transducer/horn: Type R2003631 -Ultrasonic sonotrode: 15k-FO655 -Quantity: 1x ultrasound transducer available Hodjxywxhjpfx Ah Nsng -Dimensions: 520/270/H130 mm -Weight: 19.1 kg

Condition: excellent (used), Year of construction: 2006, Urban SV 530 + WT 530 Hodpfjnzh Absx Ah Njng The machine has undergone a professional mechanical service. Ready for work.I will send a video of the machine working on whatsapp.

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode Hjdpfxjxyww De Ah Njng -Ultrasonic sweat transducer: Ultrasonic vibration unit -Welding transducer/horn: Type R2102087 -Ultrasonic sonotrode: 15k-FO13OH -Quantity: 1x ultrasound transducer available -Dimensions: 520/270/H130 mm -Weight: 19.1 kg

Year of construction: 2013, condition: excellent (used), Welding and cleaning line GRAF, year 2010 The direction of work from left to right Welder four-head SL4Q, max. welding dimension 2800 x 3200 mm, 0.2 mm flash, gasket formates Cooling station WPCNC4 4-axis cleaner with a turning station, equipped with knives for cleaning flat surfaces with a groove and smooth Hnodpfx Aevr U Syeh Nsg The line was servised in the end of 2022 y. with part replacement for over 10000 Euro (total cost of service). It is in very good condition. Currently is working.

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Ultrasonic sweat transducer: Ultrasonic vibration unit -Welding transducer/horn: Type R2102088 Hnsdpoxywuvofx Ah Njg -Ultrasonic sonotrode: 15k-FO224H -Quantity: 1x ultrasound transducer available -Dimensions: 520/270/H130 mm -Weight: 19.1 kg

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode Hnjdpfxoxywmxj Ah Nog -Manufacturer: QDSonic, Ultrasonic welding transducer, Ultrasonic vibration unit -Type: 20200319 -Horn: Type -Ultrasonic sonotrode: Length 110 mm -Number: 2x ultrasound transducer units available -Price: per piece -Dimensions: 370/110/H110 mm -Weight: 6.7 kg/pc.

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Manufacturer: Dukane, Ultrasonic welding transducer, Ultrasonic vibration unit -Welding converter: Type 41B30 93420 353328 -Horn: Type CTC205796 -Ultrasonic sonotrode: Hnjdpoxywluefx Ah Nsg -Number: 3x ultrasound transducer units available -Price: per piece -Dimensions: 450/110/H83 mm -Weight: 4.6 kg/pc.

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode Hnjdpfxoxywi To Ah Neg -Manufacturer: Dukane, Ultrasonic welding transducer, Ultrasonic vibration unit -Welding converter: Type 41B30 93420 356075 -Horn: Type CTC205782 -Ultrasonic sonotrode: -Quantity: 1x ultrasound transducer available -Dimensions: 450/110/H83 mm -Weight: 4.6 kg