Used Twick And Lakshmi for sale (5,646)

Condition: excellent (used), Complete Pallet Manufacturing Line P+K & Vanderloo For sale is a highly productive pallet manufacturing system for four-way pallets. The main line from P+K GmbH was completely overhauled in 2020 and has seen very little use since. The system efficiently covers the entire process, from stringer pre-fabrication, main nailing, IPPC branding to nesting/stacking. Technical Data & Highlights: • Changeover times: Fully automatic size adjustment for almost all components at the touch of a button! • Main line capacity: approx. 600 four-way pallets / 8 hours with only 2 operators • Stringer line capacity: High-performance cycle time of approx. 4 seconds per stringer • Control system: Siemens S7 PLC (main line) System Components: Pos. 1a: Template nailing machine P+K Type M/III/27/1500 (year of manufacture 2012 / overhauled 2020) • Robust open frame, 1,700 mm opening, max. nail spacing 1,500 mm. • 27 nail feeders in 3 nail hoppers (gearbox brake motor), stepper motor nail ejection. • 1 set (20 pcs.) of hammer blocks on a movable frame. For nail lengths 25–90 mm. • 11.5 kW eccentric main drive, frequency-controlled template transport (without templates). • Siemens S7 control, touch panel, memory for 99 layouts. • Pneumatic upper pallet guide (up to 9 deck boards), nail filling platform, central lubrication. • Pallet dimensions up to 3000x1500mm possible Pos. 1b: Fully automatic stringer nailing machine VANDERLOO (year of manufacture 2001) • Mechanical eccentric nailing, automatic format adjustment at the touch of a button. • Stringer dimensions: Length 600–1,400 mm | Width 80–150 mm (Euro & special sizes). • Stand-alone operation: 3 block feeders with NEW buffer belts & block control. • 1 automatic board magazine, 9 nail feeders with ejection control, buffer. • Support/spare parts secured in the long term through successor AVM Metaalbewerking. Pos. 2: Intermediate transfer unit with integrated IPPC branding station (approx. 2,500 mm) • Pallet transport for intermediate operations, release manually or via automatic control. • Auto-adjustment at the touch of a button: Width (700-1500 mm) & height electrically via spindle. • 2 longitudinally adjustable branding units (heating rods 2x 1,100 W), pneumatic pressing. Guodpfx Ae Afyn Hsgroi • Temperature controller with preheating circuit. Pos. 3: Positioning table • Further transport to stacking position, adjustable stop system, driven chain conveyors. • Synchronized auto-parallel adjustment via spindles (width 700-1500 mm). Pos. 4: Portal stacker (Fully automatic with nesting) • Stable double-column portal with lifting carriage (chain) & pivoting arm. Siemens S7 PLC. • Auto-gripper arm adjustment at the touch of a button to pallet length. • Capacity: Sizes 600x600 to 1600x1600 mm, stacking height up to max. 3.0 m. Pos. 5 & 6: Conveyor & safety devices • Heavy-duty discharge conveyor (approx. 5,900 mm), driven at 8 m/min. • Including all protective devices according to the installation plan. Terms of Sale: Sale ex works without warranty. Dismantling, loading and collection are the responsibility of the buyer at their own expense and risk. Price: On request (plus VAT)

Condition: used, Year of construction: 2003, The Manroland Roland 504-L is a high-performance four-color sheetfed offset press, manufactured in 2003 and currently operational in a printshop in Germany. With a 520 x 740 mm format and 170 million impressions, this press is built for demanding, high-volume production environments. The Roland 504-L is equipped with coating units for added versatility, and features semi-automatic plate change (PPL) for quick job turnarounds. Automatic format adjustment and non-stop devices for feeder and delivery ensure seamless operation and minimal downtime. The press also includes automatic washing devices for ink rollers, blankets, and impression cylinders, simplifying maintenance and improving productivity. Advanced features such as inking unit temperature control (Tempcontrol NT3), a powder device (Hitronic-S Grafix), and a dampening solution cooling unit (Technotrans) guarantee consistent print quality and optimal operating conditions. The integrated Grafix IR dryer further enhances drying efficiency, making this press a comprehensive solution for high-quality, high-speed printing. Format: 530 x 740 mm Min. Size: 260 x 400 mm Gusdpfx Aoxnbiaogrsi Max. Size: 530 x 740 mm Min. Paper Thickness: 0.04 mm to 1.0 mm Max. Paper Thickness: 0.04 mm to 1.0 mm Speed: 16,000 sheets per hour Net Weight: 24000 kg Equipment: 4 Colors Offset press with Coater RCI with CCI Color Pilot Press Pilot Roland Matic Delta Dampening with Technotrans Impression Cylinders, Blankets and Rollers Washers PPL Auto. Plate Loading Inking unit temperature control (Tempcontrol NT3) Powder device (Hitronic-S Grafix) Coating Unit with Extended Delivery Air Glide Grafix IR dryer

Condition: used, Year of construction: 2024, The E3304 cutting machine, manufactured by Pandway in 2024, is currently in stock and located in Germany. This machine has a format of 330 mm and is capable of cutting thicknesses up to 40 mm. The delivery terms are FCA (Free Carrier), meaning the seller delivers the goods to the carrier appointed by the buyer at the seller's premises. Format: 330 mm Equipment: Gujdpfevfxw Hsx Agrei cutting thickness 40 mm

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Storage location: Nattheim Godpjvvkfwofx Agroui

Condition: used, Format: 530 mm Godpfjzcd Nmox Agrjui

Condition: like new (used), Year of construction: 2023, functionality: fully functional, motor manufacturer: SEW, Equipment: type plate available, Belt conveyor curve/ Curve/ Conveyor curve 90 degrees Manufacturer: Vanderlande Year of manufacture: 02/2023 Condition: As new Model/Type: Belt with grip band Overall outside length: approx. 3200 mm Overall inside length: approx. 1520 mm Overall width incl. motor: approx. 1550 mm Overall width excl. motor: approx. 1330 mm Conveyor width: approx. 1000 mm Inside radius: approx. 970 mm Material: Steel Color: Blue/Dark gray Including frame: approx. 300 mm high Including SEW motor (1.1 KW) Stock quantity: 5 pieces Price per piece Internal article number: 2026020204 Thanks to the excellent workmanship of the conveying technology, your material will glide smoothly to its destination, even under high load. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods, we are your competent partner! We will gladly prepare an individual offer for you or advise you on design or assembly questions. Simply let us know your requirements and the local conditions. Gujdpfx Ago Afz Tdersi Benefit from our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, trades or the electronics industry. Together, we will develop ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automatic sorting technology or supplementary components such as picking shelves or containers. Features: Condition: fully functional, with signs of wear Ideal for fast material transport Professionally dismantled and packed Collection address: Industriestraße 5 (47918 Tönisvorst)

Condition: used, Year of construction: 2008, functionality: fully functional, Equipment: type plate available, Belt conveyor / conveyor belt Manufacturer: VanderLande Year of manufacture: 2008 Condition: Used With pneumatic drive Overall length: approx. 3500 mm Overall width incl. motor: approx. 1180 mm Overall width without motor: approx. 800 mm Belt width: approx. 700 mm Divided into 3 sections 1x approx. 600 mm long 2x approx. 1250 mm long Conveyor height: approx. 850 mm - height adjustable Material: Steel Color: Gray Including SEW motor (2.2 KW) Including feet Stock quantity: 8 pieces Price per piece Article number: 2026012901 Gedpfx Aj Afz Uhogroui The conveyor system was operational until it was dismantled. Condition: fully functional, with signs of use Ideal for fast material transport Professionally disassembled and packaged Thanks to the excellent workmanship of the conveyor system, your material will glide gently to its destination, even under high load. Tailor-made solutions for your internal logistics For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods, we are your competent partner! We will be happy to prepare an individual offer for you or advise you on design or assembly issues. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as: logistics, pharmaceuticals, crafts or the electronics industry. Together, we will develop ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automatic sorting technology or additional components such as picking racks or containers.

Condition: used, Manufacturer: UNIMAN Load capacity: 9000 kg Guedpfj Adqbhex Agrei Travel range: 400–2050 mm

Year of construction: 1992, condition: like new (used), machine/vehicle number: Div1, Technical data: 1x Demag KBK 1 pillar slewing crane NL 125KG with chain hoist Payload at full radius 125KG / 0.125to payload Height: about 3.5m UK outrigger: approx. 3m Gusdpfx Aong H T Uogrji Outreach: approx. 4m Hook height: approx. 2.55m Weight complete approx. 450 kg with steel or Demag chain hoist 125 kg depending on stock incl. bolts, drag cable, chassis, end cap etc. Various cranes are available Swivel range 300°, connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim There are other cranes available, load capacity 80-5000 kg, please inquire See pictures Dispatch by forwarding agent or pick-up only by appointment

Condition: new, Colour: Red Field of application: Construction We can manufacture special telescopic booms and parts. For detailed information please contact us Guedpfx Agspa Rrwjrsi

Condition: new, Year of construction: 2026, steam boiler 12.000 kg x 16 or 26 bar new 2026 on stock type: VKK Standard with or without Economizer 3 pass boiler Godpfx Agjpky Dxsreui production according DIN 12953 available immediately - additional equipment like the burner and other sizes or capacities available

Condition: used, Year of construction: 1985, edge thickness 0,4 - 12 mm work piece thickness 10 - 55 mm work piece length min 160 mm work piece width min 65 mm feed speed 13 m/ min compressed air 7 bar machine length 5420 mm weight 1950 kg glue pot with quick melt system glue application roller wit left and right turning edge magazine for PVC and strips motor height adjustment for pressure beam pneumatic pressure rollers for edge magazine control panel, rotatable all aggregates in-line controlled cutting milling combination with 2 aggregates, 1st aggregate straight, 2nd aggregate radius and phase milling tool draw blade buffing unit central lubrication for transport chain quick change system edge control system with error msg IR heater CE Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. Gsdpfx Aoc Tmygsgroui • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Technical details: weight of the machine ca.: 4,0 t machine dimensions LxWxH: 1,8 x 1,8 x 0,9 m Machine table with 5 indexing tables for multi-side machining Gjdpfx Aeu N D S Usgreui Application: Multi-side machining of workpieces in circular transfer machines in one operation on 5 indexing tables with clamping devices. Design: Round, fixed body with 5 round tact tables, which are arranged in the shape of a pentagon, and a centrally mounted turntable. Description: Turntable center = type Pentagon, diagonal 830mm; swing diameter Ø 873mm, side length 513mm 5x rotary indexing table, as a regular pentagon on machine body, center circle Ø = 1280mm, table shape truncated square 380x380mm, clamping device via 4 pieces make Röhm truncated cone clamping devices and 1 central centering flange, 360 ° rotatable, workpiece Ø approx. 730mm Actuation / drive is hydraulic *

Condition: used, Year of construction: 2003, Technical details: throat: 625 mm number of strokes: 34 Hub/min Punching capacity: 95 t stroke: 80 mm flat steel: 480 x 15 / 380 x 20 mm U-H profile: 160 x 90 Gedpfx Aju Icl Regroui knife length: 483 mm total power requirement: 7,5 kW weight of the machine ca.: 2,7 t dimension machine xH: 1,4 x 0,8 x 1,8 m hydraulische section steel shear shearing station: -shearing max. 380 x 20mm / 480 x 15mm -shear cutting max. 120 x 15mm -holder adjustable in length to 750mm -knife cutting edges = upper knife 2-fold and lower knife 4-fold profile station: processing of round and square profiles; U-profiles; double T-beams and unequal angles -angle shearing max. 90° shearing = 150 x 15mm and 45° shearing = 80 x 10mm -Profile cutting max. round steel = Ø 50mm; U-H profile = 160 x 90mm; T-profile = 120 x 12mm. Punching: -Table 600 x 600mm -throat 625mm -bore max: Ø 57 x 12mm -working stroke 80mm; stroke rate 34 strokes/min; punching pressure 40to -stop angle 200 x 100mm L=600mm Notching station: -Table size 450 x 450mm -notching material thickness 13mm; width 52mm; depth V 90° 70 - 100mm; angle flange 100 x 13mm Operation by foot switch Some accessories available. *

Condition: used, Year of construction: 2007, Technical details: throat: 640 mm round bar steel: stanzen: Ø 26 x 20 mm Punching capacity: 70 t total power requirement: 5,5 kW weight of the machine ca.: 2,0 t dimension machine xH: 2,0 x 1,0 x 1,8 m hydraulic section steel shearing machine shearing station: -shear max. 300 x 20mm / 375 x 15mm -shear cutting max. 150 x 13mm -holding-down device adjustable in length to 630mm profile station: processing of round and square profiles; U-profiles; double T-beams and non-symmetrical angles Angle/profile cutting -angle steel max. 90° shearing = 150 x 15mm and 45° shearing = 80 x 10mm Gusdpfx Agju Icmhorei -U-I profile = 130 x 65mm; T profile = 90 x 12mm -profile cutting max: round steel Ø 45mm and square steel 45mm -knife cutting edges fourfold Punching station: -Punching force 60to -throat 640mm -table WxD = 1000 x 600mm -punching max. Ø x thickness: Ø 26 x 20mm and Ø 57 x 9mm -slot punching D x W x D: 10 x 45 x 90mm -through hole in table Ø 40mm -Equipment: stop bar Al angle 100 x 80 x 1000mm Notching station: -Table W x D 430 x 380mm -notches: material thickness 10mm; width 45mm; depth 60 - 90mm; angle flange 100 x 10mm Punching: -Table 600 x 600mm -throat 625mm -bore max: Ø 57 x 12mm -working stroke 80mm; stroke rate 34 strokes/min; punching pressure 40to -stop angle 200 x 100mm L=600mm Notching station: -Table size 450 x 450mm -notching material thickness 13mm; width 52mm; depth V 90° 70 - 100mm; angle flange 100 x 13mm Please ask for accessories. Operation by foot switch Some accessories available. Please ask. *

Condition: used, Year of construction: 2003, Technical details: Gusdpfju Idhyox Agroi bore capacity in steel (diameter): 25 mm throat: 255 mm bore stroke: 140 mm spindle taper MT: MK 3 spindle speed:: 105 - 2980 / 8step U/min Distance spindle/table max.: min.: 350 / max.: 950 mm table clamping surface:: 420 x 270 mm table rotating: 360 ° table swivable approx.: 30° links / rechts drill table adjustment: 600 manuell mm column diameter: 100 mm current- max.: 400 V / 50 Hz A total power requirement: 0,9 kW weight of the machine ca.: 180 kg dimension machine xH: 0,6 x 0,5 x 1,8 m Equipment: Röhm quick-action chuck 3 - 16mm Switchover for clockwise/anticlockwise rotation for thread cutting *

Condition: used, Technical details: number of spindles: 15 Stück number of stations: 8 Stück control: PS 2000 total power requirement: 72 kW weight of the machine ca.: 18,0 t dimensions of machine: LxBxH: 2100x3400x2600 mm dimensions electric cabinet: Nr.1: LxBxH: 1000x850x2300 mm dimensions electric cabinet: Nr.2: LxBxH: 1250x850x2500 mm dimensions electric cabinet: Nr.3: LxBxH: 1000x850x2100 mm dimensions electric cabinet: Nr.4: LxBxH: 1000x500x2350 mm space requirements approx. LxWxH: 5,0 x 6,2 x 3,8 m TRANSFER MACHINE with 3 work station and 15 drill & mill spindles for example the production of a high quantity of armatures Other technical information about the machine: - workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, cycle time of 10 sec. - drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm - left 3x drill & mill spindle and 2x thread cutting spindle - right 2x drill & mill spindle and 2x thread cutting spindle and 1x U-Axis such as 2x thread cutting spindle slidable, 2x drill and milling spindle from that one slideable and 1x U-axis slideable - 1. thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left - 2. thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left Equipment: - 2 hydraulic aggregate - chip conveyor - belt filter produced by Filtertechnik Gera (fleece band 430mm) - control panel - manual switch Gusdpfx Asu Idv Dsgrei i.D. *

Condition: new, functionality: fully functional, fuel type: gasoline, fuel tank capacity: 10 l, color: yellow, operation weight: 500 kg, lifting power: 350 kg/m, lifting height: 1,600 mm, Equipment: all wheel drive, The KINGWAY HERACLES H130 is a surprisingly compact machine with great capabilities, equipped with a hydrostatic 3WD drive. Thanks to its compact dimensions and a turning radius of just 993 mm, it boasts exceptional maneuverability, allowing work in narrow passages. The machine features a mounting plate compatible with "Avant" and "Multione" attachments, further increasing its versatility. With a maximum lifting capacity of 350 kg and a tipping load of 400 kg, it is ideal for agriculture, construction, as well as larger private estates. Its low operating weight of 500 kg and easy transportability make it the perfect solution for users seeking a mobile and versatile machine. The KINGWAY HERACLES H130 is perfectly suited for agricultural enterprises, construction companies, electrical and plumbing businesses, as well as renovation firms and other service providers. We also guarantee custom after-sales service. The machines are manufactured under European technicians’ supervision, based on a robust design that enables operation under all conditions. TECHNICAL DATA: Model: H130 Operating weight: 500 kg Lifting height: 1600 mm Engine: PETROL Fuel type: Petrol Cylinders: 2 Displacement: 740 cm³ Gedewifvcjpfx Agreui Emission standard: EU Stage V & EPA Tier 4 Final Max. torque: 47 Nm at 2500 rpm Cooling system: Air-cooled Operating voltage: 12 V Battery: 20 Ah Max. tipping load: 400 kg Max. lifting capacity: 350 kg Operator’s cab: None Travel speed: 0~15 km/h Steering angle: 0~360° Turning radius (inside/outside): 0/993 mm Standard tires: 18×9.50-8 Fuel tank: 10 l Hydraulic oil tank: 10 l Hydraulic flow: 29 l/min Hydraulic pressure: 160 bar Transmission type: Hydrostatic Length: 1854 mm Width: 993 mm Bucket width: 1000 mm Height: 1304 mm THE MACHINE IS FITTED WITH DIFFERENT TIRES THAN SHOWN IN THE PICTURES. THE CURRENT TIRES ARE DISPLAYED IN THE LAST TWO PHOTOS. PRICE: Net: €6,600 Gross: €7,854 WARRANTY: Every machine comes with a 12-month warranty which can be extended for a further year. After the warranty period, we guarantee our customers access to all spare parts. SERVICE: We have our own mobile service, which caters to all our customers inside and outside Germany. KINGWAY is the leading and largest importer of construction and agricultural machinery in Europe. We have been active in the European market for 25 years and import and sell approximately 3,000 to 4,000 machines annually, earning the trust of many customers.

Condition: used, Year of construction: 2004, Offset 4 color Roland 904/8 Year: 2004 Number of impressions (mio): 178 Standard equipped Machine control - RCI - ColorPilot Feeder - Suction belts in feeder - Steel plate in feeder Printing units - Number of printing unit(s): 4 - Straight machine - PPL Semi Automatic Plate Change - Roland Deltamatic dampening - Automatic inking roller washing device - Automatic blanket washing device - Dampening system: Technotrans Delivery Gsdpfxevxqtmo Agrjui - AirGlide - Powder spray - Schneider powder extraction Accessories - Compressed air compressor, excluded Max. output (s/h): 10.000 Max. sheet size (mm): 1300 x 1850 mm

Year of construction: 1989, condition: good (used), machine/vehicle number: MBUT133-617, Technical data: 1x Demag KBK 1 wall-mounted slewing jib crane NL 125KG with steel ST chain hoist 125Kg Payload at full radius 125KG / 0.125to payload Outreach: approx. 2m Weight complete approx. 150Kg incl. wall bracket incl. bolts, cable drag, trolley, end cap etc. incl. steel chain hoist NL 125Kg Swivel range 300°, connection to 400V 16A Guodpfx Aoty Swtogrsi Crane is disassembled and immediately available Item location is 75053 Gondelsheim There are more cranes available, lifting capacity 80-5000Kg, please inquire See pictures Shipping by forwarding agent or collection by appointment only

Condition: good (used), Crane remote control, crane control, crane control, pendant control, control switch, control cylinder, control cable, control line -Manufacturer: Wieland, control cable for crane remote control -Cable length: 5 m Guedpfxj Aa Nrwj Agroi -Connector: DSE connector 16-pin -Transport dimensions: Ø 400 x 130 mm -Weight: 3.8 kg

Condition: like new (used), functionality: fully functional, overall weight: 75 kg, empty load weight: 75 kg, maximum load weight: 300 kg, Year of construction: 2025, operating hours: 30 h, Vacuum Lifter for sandwich roof Crane-Attached Lifters: Designed to be used with cranes or other lifting equipment for handling extremely large or heavy panels. A sandwich panel lifter is a specialized lifting device designed to handle and transport sandwich panels, which are widely used in the construction industry for walls, roofs, and facades. Sandwich panels consist of two outer layers (typically metal) and an insu-lating core (such as polyurethane, polystyrene, or mineral wool). These panels are lightweight yet large in size, making them dif-ficult to handle manually. Sandwich panel lifters are essential for ensuring safe, efficient, and precise installation. Key Features of a Sandwich Panel Lifter: 1. Vacuum Technology: - The lifter uses vacuum pads to securely grip the smooth surfaces of sandwich panels without causing damage. - The vacuum system is powered by an electric or pneumatic pump, ensuring a strong and reliable hold. 2. Tilting: - Lifters come with tilting mechanisms, allowing panels to be positioned horizontally or vertically as needed during installation. 3. Lightweight and Portable: Gedpfx As Abbavogrjui - Sandwich panel lifters are designed to be lightweight and easy to transport, making them ideal for use on construction sites. 4. Safety Features: - Equipped with safety mechanisms such as vacuum pressure sensors and alarms to ensure the panels are securely held during lifting.

Condition: new, Year of construction: 2026, total width: 1,250 mm, total length: 1,000 mm, total height: 650 mm, overall weight: 375 kg, input voltage: 220 V, power of feed motor: 1,100 W, secondary voltage: 380 V, number of rollers: 7, Equipment: CE marking, documentation/manual, emergency stop, Ready to Run with "R-Pro RUN"? We have taken the standing seam machine to a whole new level. While being a fully automatic machine equipped with all features, it also stands out for its compact size and light weight. In this way, it does not take up unnecessary space in the workshop and there is no need for large vehicles to transport it to the job sites. Thanks to its light weight, it can be eaasily carried anywhere. Faster, more precise and easier to use... It produces 25 mm seam high standing seam metal from coils or sheets in a single pass. Eave and fascia claddings are also produced quite easily and quickly. Both Modes are on the same machine! Automatic Mode: The lenght of the panel to be produced and quantity are entered into the digital screen. Once the desired dimension is reached, the machine automatically performs the cut using a guillotine shear and continues production. There is no need to wait by the machine. It is sufficient to simply collect 25 mm seam-height metal panels as they emerge from the machine. The machine will stop operating once the specified quantity has been reached. Semi-Automatic Mode: The material inside the machine reaches the desired lenght and stops. Cutting is performed using a motorized guillotine shear by pressing a button. Afterward, the machine continues the production process with the press of a single button. Once the specified quantity is reached, the machine stops operating. It features roll-forming rollers made of high-quality steel with corrosion protection. It is a cost-effective, long-lasting and trouble-free machine that offers a sustainable solution and maintains its quality for many years without requiring additional expenses. A brand that stands ready to provide support at any moment - with an extensive and robust inventiory of spare parts and a team of expert sevice employee - guaranteeing that your operations never come to a halt: Wide spare parts inventiory, rapid service. MAXIMUM MOBILITY AT LOW COST There is no need for large, difficult to carry and costly standing seam roll forming machines, when there is a "R-PRO RUN" standing seam machine. With our portable standing seam machine, high precision standing seam panel production is possible without any length limit. QUALITY and TRUST – REIS STANDING SEAM TECHNOLIGIES Every manufactured “R-PRO RUN” standing seam machine goes through delicate tests Easy maintenance CE Certificate EU Attestation of Compliance Certificate ISO 9001 DIN EN 349 DIN EN 1037 DIN EN ISO 12100-1/2 DIN EN 13849-1 DIN EN ISO 13850 DIN EN ISO 13857 DIN EN 14121-1 DIN EN 60204-1 2 years of warranty "R-PRO RUN" Standart Features - Fully Automatic Guillotine Shear Guedj Abbmiepfx Agrji - Dijital Encoder for length and quantity - Ribbing Attachments - Cabled remote controller - Emergency stop button - Forward and backward button - Material width adjusment (250 mm – 700 mm) - Wheels (Locking feature) - Standard standing seam height 25 mm - Weight: 375 kg - You can transport with small cars - You can lift it to the roof easily

Condition: new, various original SANDVIK / TAMROCK filters compatible with SANDVIK and TAMROCK drilling rigs 2 x air filter - No. 04710046 1 x air filter - No. 86529569 2 x oil-air separator - No. 55184429 1 x oil filter - No. 88661569 1 x fuel filter - No. 88523979 Gujdpfez S Dt Iex Agroi 1 x hydraulic filter - No. 81893749 2 x hydraulic filter - No. 86727289 Available for sale individually or as a package.

Condition: good (used), Indexable insert drills, high-performance drills with indexable inserts, solid drills, end mills, shank cutters, milling cutters, indexable insert milling cutters, shank cutters with internal cooling, indexable end mills, indexable insert drills -Finger end mill: Indexable insert end mill with internal cooling, 2 pieces -Hole: Ø 40 mm -Diameter: See photos for sizes/reversible inserts -Submission/Price: complete -Transport dimensions: 240/105/H60 mm -Weight: 3.5 kg Gode Aayniopfx Agreui