Used Twin for sale (2,363)

Condition: good (used), DEBAG Monsun Twin deck oven – bakery oven – 8 decks, year of manufacture 2012, oil-fired. Used, self-dismantling required. Manufacturer: DEBAG • Model: Monsun Twin • Year of manufacture: approx. 2012 • Version: multi-deck/deck oven (approx. 8–10 decks) • Fuel type: heating oil Bledpfxjyz Rc So Amren • Control: digital control system available • Complete exhaust system and technology included

Condition: used, Twin vertical band saw with log lengthener. Suitable for widths from 70mm to 200mm. Log length from 50cm up to 3.7 meters. Bledpfxsyh Hc Rj Amren

Condition: used, Year of construction: 2002, Overview This Twin Pack handle applicator, built in 2002, applies carry handles to PET bottle multipacks. It comes from a mineral water packaging line of the same year with an output of 20,000 - 30,000 bottles per hour depending on format. The machine is still installed and under power and can be inspected on site. Technical data - Manufacturer: Twin Pack - Year of manufacture: 2002 - Machine type: handle applicator for beverage multipacks - Line output: 20,000 - 30,000 bottles/h depending on format - Line formats: PET bottles 0.25 l, 0.33 l, 0.5 l, 0.75 l, 1.0 l and 1.5 l - Control: Siemens text operator panel Equipment - Handle application unit with tape reels on a blue steel frame above the pack conveyor - Control panel with separate start, stop and reset for the front and rear sections, emergency stop - Guarded enclosure with transparent doors Condition Bledpsz Elmhsfx Amron Still installed and under power. An inspection on site is possible. Availability Available from 31 October 2026. Location: Germany.

Condition: used, Year of construction: 2021, Overview This Twin Monkeys Cimarron is a compact automated canning system (monobloc can filler + seamer), built in 2021 by Twin Monkeys Beverage Systems (Denver, USA) and distributed and serviced in Europe by Agrovin. Designed for craft breweries, it fills and seams standard 0.33 L and 0.44 L beverage cans at up to 3,000 cans per hour in its current single-lane configuration. Cans run through a fully automatic cycle: air purge, filling, lid application under CO₂ and seaming. The low-oxygen filling system works with a fill tolerance of ±2 g and dissolved-oxygen pickup as low as 20 ppb; a wedge-style seamer (patent pending) closes the cans. All parameters are managed on the color touch-screen PLC, including automatic CIP wash cycles, cycle counters and operator help screens. The machine is still installed and in production and can be seen in operation. Technical data - Manufacturer: Twin Monkeys Beverage Systems (Denver, USA) - Model: Cimarron - Year of manufacture: 2021 - Machine type: automated canning monobloc (can filler + seamer) - Capacity: up to 3,000 cans/h in the current single-lane configuration - Can formats: standard 0.33 L and 0.44 L (Ø 66 mm); Slim / Sleek formats (Ø 52.8 mm) possible with optional change parts - Filling accuracy: ±2 g; dissolved oxygen as low as 20 ppb - Control: color touch-screen PLC incl. automatic CIP cycle - Compressed air (clean, dry): 90 psi / 4.5 cfm (approx. 6.2 bar / 127 L/min) - CO₂ supply: 20 psi / 1.0 cfm (approx. 1.4 bar / 28 L/min) - Materials: stainless steel AISI 304, anodized aluminium, technical plastics - Dimensions (L x W x H): approx. 2,000 x 875 x 1,860 mm - Weight: approx. 330 - 430 kg (depending on configuration) - CE marked Equipment - Fully automatic air purge, filling, lid application with CO₂ injection and seaming - Wedge-style seamer (patent pending) - Lid applicator with CO₂ curtain to minimise oxygen pickup - Product tank with automatic pressure regulation - Rejection of defective cans Bodpfx Amozktv Rorjln - Rotary accumulation table at the discharge (included, see photos) - Mobile stainless-steel frame on lockable casters - Expandable platform: additional filling heads can be retrofitted (manufacturer rating up to 6,000 cans/h with 10 heads) Condition Used - good working condition, built 2021. The machine is still installed and in regular production use at the current owner's site and can be visited and seen in operation by appointment. Availability Expected availability: April - May 2027 (the machine remains in production until then). Location: Spain.

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO Concrete Mixers; single shaft, twin shaft and planet-type models are produced in three different models and different capacities. The durable and long-life wearing plates, reinforced mixing arms and paddles, has been projected by our engineers to suit every need and capacity. Our mixers have a significant market share both at home and abroad with the price advantage brought by mass production, short delivery time, quality manufacturing and spare part supply guarantee. Technical details: Bsdpfxez Hby To Amrsln  Type: Twinshaft mixer (TWS 03)  Wet concrete capacity: 3 m3  Dimensions (length x width x height): 2300 x 4090 x 2750 mm  Feeding capacity: 4500 lt  Fresh concrete capacity: 3750 lt  Compacted concrete capacity: 3000 lt  Motor power: 2 x 55 kW  Hydraulic discharge gate  Automatic lubrication FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO Concrete Mixers; single shaft, twin shaft and planet-type models are produced in three different models and different capacities. The durable and long-life wearing plates, reinforced mixing arms and paddles, has been projected by our engineers to suit every need and capacity. Our mixers have a significant market share both at home and abroad with the price advantage brought by mass production, short delivery time, quality manufacturing and spare part supply guarantee. Technical details:  Type: Twinshaft mixer (TWS 02) Bodpfoz Hbwxsx Amroln  Wet concrete capacity: 2 m3  Dimensions (length x width x height): 2000 x 3400 x 2450 mm  Feeding capacity: 3000 lt  Fresh concrete capacity: 2500 lt  Compacted concrete capacity: 2000 lt  Motor power: 2 x 45 kW  Hydraulic discharge gate  Automatic lubrication FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, Year of construction: 2009, Overview  This handle applicator was manufactured in 2009 by Italy TWIN PACK. The machine is designed for handle application on PET bottle packs. Production was stopped in July 2009 due to the permanent closure of the plant. The machine is still installed and can be visited in static on request. It has less than 500 operating hours and is available immediately. The reason for sale is a new project with installation of a complete new line. Technical data  - Capacity: 35 ppm - Formats: 1.5 L – 3×2 - Application: Handle application for PET bottle packs - Configuration: Not provided Bljdpjy Etdgjfx Amron - Operating hours: Less than 500 hours

Year of construction: 2011, condition: used, Intervac GmbH Mobile Double Chamber Vacuum Machine Bljdpeym U Syjfx Amren Type: INV 11/11 Year of construction: 2011 230/400 V, 50 Hz, 2.5 kW Weight: 355 kg Seal length: (2x) 620 mm Dimensions chamber: (2x) 600 mm x 670 mm Total dimensions: 1550 mm x 970 mm x 1220 mm.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, 1 x Loma Systems IQ2F/IQ3+ twin-head metal detector with pneumatic push-arm reject into a lockable bin, mounted on a height-adjustable frame. This unit is fully retail compliant. Manufacturer - Loma Systems Serial number for IQ2F Ferrous-in-Foil head - QFP37184-55144F. Serial number for IQ3+ standard head - QPB35-15-25491D. Date of manufacture - 2014. Aperture dimensions: IQ2F Ferrous-in-Foil head - 370mm wide x 180mm high (125mm useable) / IQ3+ standard head - 350mm wide x 125mm high (115mm useable). IQ3+ standard head frequency - Variable. Handing - Right to Left. Belt type - modular plastic. Bsdpfxoy Hh U Nj Amreln Belt dimensions - 2700mm long x 300mm wide.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, 1 x Loma Systems IQ2F / IQ3 twin-head metal detector with alarm and belt stop on detect reject system, mounted on a height-adjustable frame. Manufacturer - Loma Systems Date of manufacture - 2010. Serial number IQ3 standard head - MD301-12429D. Aperture dimensions: IQ2F Ferrous-in-foil head - 370mm wide x 135mm high (105mm useable) / IQ3 standard head - 350mm wide x 150mm high (115mm useable). IQ3 standard head frequency - Variable. Blodjy Hinkjpfx Amron Handing - Left to Right. Belt type - rubber. Belt dimensions - 2600mm long x 300mm wide.

Condition: used, Year of construction: 2008, Technical details: max. turning diameter: 350 mm turning length: 1040 mm control: OSP E 100 L Fanuc greates pass round over bed: 550 mm Max. distance between centres: 1200 mm max. workpiecediameter: 550 mm Traverse X-Axis 1: 270 Traverse X-Axis 2: 230 mm Traverse Y-Axis 1: 120 (±60) mm Traverse Z-Axis 1: 930 mm Traverse Z-Axis 2: 920 mm Spindle 1 Power: 22 / 15 kW Spindle 1 RPM: 5000 1/min spindle nose: JIS A2-8 bar material dia.: 65 mm C-Axis: 0,001° Number of Turrets: 2 Turret No.1 stations / rotary tools: 12/12 VDI 40 Turret 1 tool RPM: 4500 1/min Turret 1 power rotary tools: 7.0 / 3,3 kW Turret No.2 stations / rotary tools: 12/12 VDI 40 Turret 2 tool RPM: 4500 1/min Turret 2 power rotary tools: 7.0 / 3,3 kW rapid traverse X-axis: 30 m/min rapid traverse Y-axis: 26 m/min rapid traverse Z-axis: 40 m/min total power requirement: 33 kVA weight of the machine ca.: 10 t dimensions of the machine ca.: 7,0 x 2,3 x 2,3 m Accerories Chip conveyor part counter total counter tool setting Signal lamp 3 colors spindle load monitor B Spindle 1 Chuck 300 mm CNC Turning-and Milling Center The Okuma LT 300 MY has 2 turrets, the upper turret has Y-axis with milling function, the lower turret has milling function. It has main- and subspindle. This allows synchronized machining using 2 turrets. There is an Interlit paperfilter/high pressuire system with the machine with coolant cooler. There are 7 identical machines available, all in very good and well maintained condition. * Bedpfx Ajz Ig Sqjmrjln

Condition: new, functionality: fully functional, power: 18.5 kW (25.15 HP), color: other, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO Concrete Mixers; single shaft, twin shaft and planet-type models are produced in three different models and different capacities. The durable and long-life wearing plates, reinforced mixing arms and paddles, has been projected by our engineers to suit every need and capacity. Our mixers have a significant market share both at home and abroad with the price advantage brought by mass production, short delivery time, quality manufacturing and spare part supply guarantee. Bledpfxjzar I Sj Amrjn Technical details:  Type: Twinshaft mixer (TWS 01)  Wet concrete capacity: 1 m3  Dimensions (length x width x height): 1700 x 2900 x 2000 mm  Feeding capacity: 1500 lt  Fresh concrete capacity: 1250 lt  Compacted concrete capacity: 1000 lt  Motor power: 2 x 18.5 kW  Hydraulic discharge gate  Automatic lubrication FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, Year of construction: 2012, 2012 MultiWeigh HDW 20-40-60 TWIN multihead weigher with 20 weigh hoppers – used 20-head multihead weigher in TWIN configuration, built for frozen meat. The MultiWeigh HDW 20-40-60 TWIN is a multihead weigher with twenty weigh hoppers, made by HD-Wiegetechnik in Wetzlar. Thanks to the TWIN configuration the machine can run as two weighers and discharge two portions at once, or use all twenty hoppers for one heavy portion. The range runs from 230 grams to 5 kilos per weighment, with a 5-gram scale interval. The machine was built for frozen meat (product range 0 to -15 °C): dimpled stainless steel contact parts the product does not stick to, a wash-down IP65 build and an IPC controller with colour touchscreen. Built in 2012, complete with dispersion cone, feed pans and accessories. It is in Emmeloord and can be viewed and tested with your product. Key features - Twenty weigh hoppers in TWIN configuration: two portions at once or one heavy portion - Weighing range 230 grams to 5 kilos, 5-gram scale interval - Built for frozen meat, product range 0 to -15 °C - Dimpled stainless steel contact parts, wash-down (IP65) - IPC controller with colour touchscreen and a programme per product Bsdsz Hqzgspfx Amrsln - Complete with dispersion cone, feed pans and accessories Why a TWIN weigher For every weighment a multihead weigher picks the combination of hoppers that comes closest to the target weight. With twenty hoppers the controller has plenty of combinations to choose from, and in TWIN mode the machine splits them over two outlets. One weigher then feeds two packaging machines or two lanes. For large portions you run all twenty hoppers to a single outlet. That makes the machine suitable for small retail packs as well as foodservice portions of up to 5 kilos. Refurbishment if you want it Take the machine as it stands here, or let us go through it first in our own workshop: inspection, replacing wear parts, cleaning and testing with your product. Exactly what is done is agreed per customer. Located in Emmeloord, the Netherlands. Available immediately – price on request. More photos and full details on our website: [](/) Machine type: Multihead weigher, TWIN configuration Condition: Used Number of weigh hoppers: 20 Weighing range: 230 - 5,000 grams Scale interval: 5 g (dw) / 10 g (d), accuracy class X1 Product: Frozen meat, 0 to -15 °C Controls: IPC611-W1200 with colour touchscreen Construction: Stainless steel, dimpled contact parts, IP65 Connection: 400 V, 50 Hz; compressed air 6 bar

Condition: used, Double Paddle Mixer Inside dimensions: 1000 mm x 750 mm x 650 mm Total dimensions: 1500 mm x 1040 mm x 1770 mm In good working condition Fully Stainless Steel Bledpeym Ui Eofx Amrsn

Condition: used, Year of construction: 2002, Overview Bljdpfxey Hkhfs Amrsn This Twin Pack MDEL handle applicator, manufactured in 2002, is designed for the application of carry handles on beverage multipacks. The machine was primarily used for producing various multipack configurations, including 2x3x0.5L, 2x2x1.0L, 2x3x1.0L, and 2x3x1.5L, offering flexibility across different bottle sizes and packaging formats. Due to the discontinuation of disposable production and space constraints, the machine was dismantled in calendar week 11/2026 and is currently in storage. Technical data - Manufacturer: Twin Pack - Model: MDEL - Machine type: Handle applicator (carry handle machine) - Year of manufacture: 2002 - Application: Application of carry handles for beverage multipacks - Formats: 2x3x0.5L, 2x2x1.0L, 2x3x1.0L, 2x3x1.5L Equipment - Automatic carry handle application system - Suitable for various multipack configurations - Integration capability into existing bottling and packaging lines

Condition: like new (used), functionality: fully functional, Year of construction: 2023, Coperion ZSK 45 Mc18 Twin-screw Extruder system (2023) Drive motor Elin 400V IP55 122kW drive power 611 Nm Bsdpsz Eh Dvjfx Amroln 62.4Hz; 1906 1/min Gear drive Eisenbeiss Chiller 100kW cooling capacity side feeders ZS-B 58 Busch R5 RA 0025 F Vacuum pump/0.1mbar pabs/30m/h Vmax

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2003, operating hours: 5,000 h, machine/vehicle number: 90201097-0010/2003, screw conveyor diameter: 44 mm, screw conveyor length: 2,420 mm, For sale is a twin-screw extruder from the renowned company Berstorff, manufactured in 2003, for the production and processing of demanding rubber and TPE compounds. The system was operated in a pilot plant of a research institute and was used exclusively for research and development purposes. Unlike systems used in industrial production, the extruder was therefore not used in continuous production. Accordingly, the machine has only a few operating hours. Bsdez Eqwrspfx Amrjln The extruder is particularly suitable for research and development departments, compounders, and companies in the rubber and plastics industry that are looking for a high-performance system for trials, recipe development, material testing, and small-batch production. The detailed technical data and the available screw elements can be found in the attached documentation. The existing equipment allows for flexible configuration of the screw for different compounding tasks.

Condition: used, Year of construction: 2007, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, year of last overhaul: 2022, We are offering this used KÖNIG ECO TWIN roll production line, manufactured in 2007. Blodpfx Aoznm S Hjmron Model: ECO TWIN Type: 800-(DB800)-K6-SCHN6/B-(DA) Serial number: 07.0.0782 Year of manufacture: 2007 Power: 8 kW Frequency: 50 Hz Rated voltage: 3 × 400 + N V Rated current: 15 A The system has been fitted with new belts and is in perfect, fully functional condition. It was used by us solely as a backup system and was therefore only used very rarely. We acquired and overhauled the system approximately two years ago. The system is immediately available and can be collected directly after arrangement. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2007, functionality: fully functional, Envelope inserting machine KERN 3500 Twin Channel K990 Year of production: 2007. Counter: 145 million Full service contract. Bjdpfjxfwfxex Amroln When purchased together with the Kern 2600, an attractive price for the machines can be negotiated. I have 2 machines for sale with this configuration.

Condition: good (used), Twin Ribbon Mixer Fully Stainless Steel Mixing Chamber Dimensions 1500mm Long x 1100mm Wide x 700mm Deep Bledpfx Amequ Uykorjn

Condition: like new (used), Year of construction: 2023, functionality: fully functional, 4 Wagner TWINCONTROL 2k paint application systems, color spraying systems 2 x low-pressure systems, used only once for testing purposes 2 x Airmix systems, little used, in new condition Each system consists of 3 piston pumps: 1 x for the base component 1 x for the hardener component 1 x for flushing with accessories On request, also available with stainless steel storage tanks with agitator, 2 x new, 2 x demonstration units Can also be purchased separately Ideal for series production and automation EX version, as it operates only with compressed air Purchase or lease takeover possible See also document in the appendix (designations) Price description: Two systems always belong together. One system for priming, one system for painting. 1. Twin Control low-pressure (AirCode), either sales price 59,000 euros or lease takeover 1,530 euros/month + 17,000 euros takeover 2. Twin Control high-pressure (Airmix), either sales price 62,000 euros or lease takeover 1,535 euros/month + 19,000 euros takeover Lease takeover subject to: Agreement from the leasing company 3. Stainless steel storage tanks (2 new) with agitator, sales price 3,200 euros Bodpfx Aozk A H Eomrjln 4. Stainless steel storage tanks (2 used) with agitator, sales price 2,400 euros If the complete package is taken over, the price is negotiable.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 200 h, machine/vehicle number: 230608, 4. Main Extruder Type: CWT95-Plus co-rotating twin-screw extruder; L/D 48 Machine Description: *IE5 AC 250 kW motor *Gearbox: Precise balancing principle applied to increase torque level; High safety factor design; Latest steel alloy material for gears, applied with special heat treatment and manufactured to a high level of precision; Imported NSK bearings and sealing rings; Special lubrication system combined with immersion and forced lubrication solutions; Latest generation plate heat exchanger configured for optimal cooling; Input/output rotation speed: 1480/600 rpm; Torque: 2x1990 N.M Oil pump: 1.5 kW With heat exchanger, flow meter, oil pressure gauge Bjdpfx Amjzxxifjroln *Power Transmission: Compomac safety clutch torque limiter from Italy, with speed sensor *Extrusion Line: Screw diameter: 93 mm, L/D: 48:1; Maximum screw speed: 600 rpm; Screw configuration: modular structure, torque transmission via splines; Screw material: W6Mo5Cr4V2, surface hardness HRC58～64; Barrel configuration: modular structure, each barrel with a length of 4L/D; The inner surface of the linear material is made of α101, surface hardness is HRC62-64; Barrel No.1: Feeder for all possible components, No. 4 and No. 6 with a side feed port and a venting port. No. 8, 9, 11 with a suction port for degassing. The screw profile will be determined based on the requirement. *2 side feeders for lateral feeding *1 set of degassing adapted to the needs Liquid ring pump, 1m3 water tank, gas and vapor recovery system *Electrical Cabinet Enclosure: Rittal Heat Exchanger: Apex Variable Frequency Drives: ABB PLC: Siemens Components: Schneider Electric *Spare Parts One set of screw and barrel elements and one set of shafts will be delivered with the machine.

Year of construction: 2023, condition: used, functionality: limited functionality, GÜNTHER - SPLITTER TWIN WAVE Bsdpfxoy N Rlve Amrjln The Günther SPLITTER Twin Wave is a screening/separation machine designed for materials that are difficult to screen, especially coarse, wet, sticky, or contaminated substances. It is used to separate material based on grain size and to remove unwanted components such as stones, clay, mixed waste, or unshredded material. The machine is particularly suited for construction material recycling and processing, especially for mixed construction waste, excavated soil, as well as stones and earth. The twin-wave design keeps the material longer on the screening deck, helping to better dislodge adhering or clay-heavy components.

Condition: good (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: 1930036, operating hours: 6,900 h, This is a used twin-screw extruder for processing moist materials. (A complete overhaul is included in the price and will be carried out by Brabender/now Anton Paar.) The machine was used to produce textured soy protein in a purely vegan facility. The textured soy protein is moist, and it was used to produce vegan products such as "cutlets," "fish," "nuggets," "bacon," etc. Blodpfxezhnlus Amrsn

Condition: used, functionality: fully functional, Year of construction: 2004, machine/vehicle number: 04058-00, control type: CNC control, actuation type: hydraulic, controller model: CNC 5000, working width: 1,250 mm, operating speed: 250 mm/s, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 25 A, type of input current: three-phase, Equipment: CE marking, emergency stop, ORNS Twin-Pro 150 G – Year of manufacture 2015 – Ready for immediate use For sale is a well-maintained JORNS Twin-Pro 150 G from the year 2015. The machine is in good technical and visual condition and is fully functional. The system is ideally suited for the economical production of roof and facade profiles as well as sophisticated edge profiles. Technical data: Bledpfx Amszmfibersn Manufacturer: JORNS Type: Twin-Pro-150G-RH-UV-SLE-1150-CP100-6.4-mp Year of manufacture: 2015 Serial number: K14044 Control: CP100 Working depth: 1,150 mm Usable length: 6,400 mm Steel: up to 1.5 mm Aluminum: up to 2.5 mm Special features: Good condition Available immediately Ideal for sheet metal workers, roofers, and facade companies The machine can be inspected by appointment. We look forward to your inquiry for further information.