CNC lathe

MAZAK SQT 200

Condition: excellent (used), Year of construction: 1999, CNC Lathe MAZAK SQT 200 MS Year of manufacture: 1999 Including indicated tools and sub-spindle Control: Mazatrol PC Fusion CNC 640T Technical specifications: Max. swing diameter: 525 mm Max. swing diameter over saddle: 350 mm Max. turning diameter: 300 mm Bar work up to max. diameter: 51 mm Main spindle: Speed range: 35 – 4,000 rpm Main drive power: 15 kW Max. torque: 350 Nm Spindle nose: A2 – 6 inch Spindle bore: 61 mm Spindle positioning C-axis: 0° - 360°/0.001° Second spindle: Speed range: 35 – 5,000 rpm Drive power: 7.5 kW Max. torque: 57 Nm Indexing: 72 positions/5° Tool turret: Number of tool stations: 12 (freely configurable with stationary and driven tools) Turret indexing time – 1st station: approx. 0.2 s Driven tools: Drive power: 3.7 kW Max. torque: 35 Nm Speed range: 25 – 4,500 rpm Travel: Turret travel: X-axis: 190 mm Z-axis: 575 mm B-axis: 585 mm Rapid traverse: X-axis: 30 m/min Z-axis: 30 m/min B-axis: 18 m/min Gujdpfx Aox Hgl Heg Rjc Feed range: X/Z-axis: 0 – 5,000 mm/min C-axis: 1 – 2,000°/min

Condition: good (used), Year of construction: 1999, Machine is in good condition. X 750 mm Godpfxowx Rafj Ag Rjuc Y 400 mm Z 500 mm 10.000 rpm

Condition: excellent (used), Year of construction: 2010, AMADA MODEL HFT 8025 80 tons capacity x 2500 bending length hydraulic downstroking press brake complete with CD 2000 4 AXIS colour graphic cnc control, ERWIN SICK machine mounted electronic guards , side and rear interlocked fencing Model Amada HFT 8025 downstroke CNC Press brake Year 2010 Tonnage 100 KN Type CD 2000 CNC Controlled Axis Y1, Y2, X, R Gsdpfx Aeu A Dgrsg Rsuc Max. Bend Length 2500 mm Open height 470 mm Stroke Length 350 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Motor Power 7.5kw Weight 6100 kg Bed Length 2500 mm Bed Width 60 mm Open Height 470 mm Throat Depth 420 mm CNC Control Backguage Stoke (X axis) 700 mm/s Max gauge 1000mm R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: excellent (used), Year of construction: 2004, pressing force: 400 t, stroke length: 680 mm, working width: 4,100 mm, Used, Very Clean high quality Bystronic 400ton x 4metre Cnc Hydraulic Press Brake for sale Gujdpfx Ajv Dw Syeg Rsc Very clean 4metre cnc pressbrake for sale – Bending / Folding machine down stroke pressbrake for sale With Extended daylight and stroke Make= Bystronic Model = PR10 400x4100 PR400 Bed Length 4100mm / 4.1metre 8axis – 6axis back gauge Y1, Y2, X1,X2,R1,R2,Z1,Z2 x2 Front powered sheet followers / lifting aids Hydraulic tool clamping CNC Hydraulic Press 400 Tonne Capacity Swiss made Cybelec Controller – MoEva12 Multiple Forming Tools Tool stacking system included Full Working Order and fully serviced with Bystronic UK Max closing speed 200 mm/s Complete with a good selection of tooling

Condition: used, Year of construction: 2003, x-travel:760 mm y-travel:290 mm z-travel:370 mm turning speeds:60 - 4200 U/min Gsdpfx Aet U Rm Usg Rsuc table::750 x 230 quill stroke:127 mm quill feed:(3) 0,04; 0,08; 0,13 mm/U feed range:19 - 890 (x) mm/min spindle cone:SK 30 column arm:171 - 476 mm total power requirement:2,4 kVA weight of the machine ca.:0,95 t dimensions of the machine ca.:2,05 x 1,63 x 2,07 m 3-axis RSF-electronic Z503 digital display, swivelling vertical head +/- 90°, all 3 axes with Feeds, spindle quill (60 mm), switchable spindle brake, coolant system, bore-feed 0.03; 0.12; 0.06 mm/rev. machine light, angled table, extensive accessories (counter bearing, milling spindles with distance rings, tool holders etc.)

Condition: new, Year of construction: 2021, functionality: fully functional, Stock machine "NEW" – available at short notice! (Subject to prior sale) Control: Fanuc 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC memory LOOK-AHEAD function, 400 blocks Machine Table: Table size: 950 x 550 mm Load capacity: 800 kg T-slot width: 18 mm Number of T-slots: 3 Distance between T-slots: 150 mm Travel axes: Travel X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 – 700 mm Linear guides & speeds: Ball linear guides in X/Y axes Roller linear guide in Z axis Rapid traverse X/Y/Z: 40/40/30 m/min Feedrate during milling: 0 – 10,000 mm/min Smallest increment: 0.001 mm Tool magazine (CAM-Type) / changer: Number of magazine pockets: 30 System: random access Max. tool diameter: Ø 75 mm Max. tool diameter with adjacent pockets free: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/cont.): 18.5/11 kW 15,000 rpm direct-drive spindle Spindle oil cooler Coolant, chip, and compressed air management: Coolant system incl. 300 liter tank and pumps External coolant around spindle Chip augers right and left in machine bed Compressed air nozzle at spindle (M32/M33) Compressed air through spindle (M38/M39) Compressed air and coolant gun Other features: Swiveling operator panel Electronic handwheel (wired) Central lubrication oil/air Full enclosure Work light Heat exchanger at control cabinet Auto power-off function Hand tool set Signal lamp Transformer 400 VAC, 50 Hz CE declaration of conformity according to European directives Electrical and pneumatic requirements: Electrical connection: 36 kVA Required pneumatic input pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required installation area: W3,160 x D3,000 x H3,000 mm (incl. chip conveyor ejection to the left) Machine weight: approx. 5,400 kg (net) Available special equipment: Spindle: - Direct-driven spindle SK-40, 15,000 rpm - Drive power (30min/cont.): 18.5 / 15 kW, (FANUC motor) Tool magazine / changer: - Drum-type tool magazine with 30 pockets, DIN69871, SK-40 Rotary or additional axes: Guodpfxeifn N Nj Ag Rjc - Preparation for 4th axis (FANUC controls), incl. wiring and Harting connector, without axis drive Coolant, chip, and compressed air management: - Bed flushing - Through-spindle coolant pump, 20 bar pressure, for direct-driven spindles - Includes cartridge filter - Belt-type chip conveyor including chip cart (chip discharge at front, to the left side of the machine) Measuring and monitoring systems: - RENISHAW OMP-60 probe with infrared transmission system for workpiece measurement, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ tool laser measurement system and tool breakage monitoring in the machine, incl. bracket - Auto-door (side door) - Pneumatic interface for workpiece clamping - Clamping devices as shown With RoboJob Mill Assist 25kg (Year of construction 2025 – NEW) - Full enclosure - Double gripper Available immediately

Condition: used, Year of construction: 2002, turning diameter max. 300 mm turning length max. ca. 550 mm control PC Fusion CNC 640 T standard turning dia. 276 mm swing diameter max. 525 mm Distance Spindlenose - turret face 115 - 690 mm turning speed range - main spindle 35 - 4.000 min/-1 power capacity - main spindel 22 kW max. Torque 351 Nm spindle nose A2-6" spindle bore 76 mm max. usable bar diameter 64 mm chucking diameter max. 250 mm C-Axis 360 ° number of toolpositions 12 pos. tool taper VDI 40 Shank diameter 25 mm Drill shank diameter 40 mm turret change time 0,2 / 0,6 sec. Spindle speed - driven tool pos. 25 - 4.500 min -1 power capacity - driven tool pos. 3,7 kW max. Torque 35 Nm Spindle speed range subspindle 35 - 4.000 min/-1 power capacity - Sub spindle 7,5 kW max. Torque 57 Nm chucking diameter max. 150 mm x-axis 190 (185 + 5) mm z-axis 575 (580 + 5) mm Traverses Subspindle B: 585 (580 + 5) mm C-Axis 360 ° rapid traverse X/Z: 30 m/min rapid traverse C: 400 min/-1 rapid traverse B: 18 m/min feed range X/Z: 0 - 5.000 mm/min feed range C: 1 - 2.000 °/min total power requirement 34 kVA Gujdpfjxmaguox Ag Rec weight of the machine ca. 5,9 t dimensions of the machine ca. 5,0 x 3,0 x 2,5 m CNC - Turning- and MillingCenter MAZAK - Super Quick Turn 250 MS - Main- and Subspindle - Tool-Drive - C-Axis

Condition: new, Year of construction: 2024, cutting height (max.): 150 mm, cutting range round steel at 45°: 108 mm, cutting range round steel at 90°: 108 mm, BERG+SCHMID GBS 218 Eco AutoCut double mitre bandsaw Speed: 25-80 m/min - Mitre left 60° - For cutting steel, stainless steel and aluminum profiles - Quick-clamping vice with quick-clamping device a. - Built-in blade tension control b. - Saw blade guide made of carbide c. - Electric automatic cooling system - Machine base (supplied disassembled) The AutoCut system consists of: - Hydraulic cylinder, feed control, spring assembly, limit switch and enables three work sequences: 1. automatic lowering of the saw frame via hydraulic cylinder with infinitely adjustable feed control valve and limit switch at the end of the cut 2. high-speed lowering of the saw frame from the rest position up to the workpiece, then switching to normal saw feed Gsdjt I R Edepfx Ag Rouc 3. manual operation - hydraulic cylinder works as a brake cylinder Saw blade dimensions: 2455x27x0.9mm Further accessories such as saw bands, roller conveyors, measuring stops, minimum quantity lubrication etc. available on request! Delivery time: ex stock Waiblingen Beinstein

Condition: good (used), Year of construction: 2010, functionality: fully functional, operating hours: 15,996 h, input voltage: 400 V, overall weight: 6,750 kg, 1000 KN Max. stroke: 200 Weight: 6750 Noise level: 74 dB Year of manufacture: 07/2010 Voltage: 400 V / 50Hz Rated current: Current operating hours: 15,996 hours with manual angle measurement and correction system with safety laser UVV inspection on a regular basis / maintenance always carried out by Amada on a regular basis Accessories: Tool die: 2 pieces UKB 20.478 V8/12 30° 835mm 3 pieces UKB 20.344 V4/V7 88° 835mm Tool holder: Gusdpfx Agstwliwj Rjc 4 pieces UKB substructure for double V die 20.287 + 60.919 835mm Bending swords: 5 pieces UKB 10.261 H100 R0.6/90° 2 pieces UKB 11.158 H80 R0.6/30° 2 pieces UKB 11.200 H66 R0.8/90° Other: Light barrier in need of repair (new price approx. €4500) – separately as a replacement as an attachment (has been renewed) The machine can be inspected under power in DE84051 Mettenbach by appointment. Sale only to commercial customers and with exclusion of any warranty!

Condition: used, Pallet with 18H7 T-slots, suitable for DMG DMC 100 H and DMG DMC 100 U as well as DMC 125H/U Duoblock. More than 10 pallets available. Gusdpfx Aeqx Uh Nog Rsc