Used Tubes for sale (1,855)

Condition: new, functionality: fully functional, total length: 1,200 mm, total height: 2,100 mm, total width: 2,500 mm, empty load weight: 750 kg, input voltage: 400 V, water tank capacity: 400 l, warranty duration: 12 months, DPF DUO PREMIUM = CLEANING CABIN + DRYER FOR DPF/FAP FILTERS This set of devices allows for maximum optimization of the regeneration process. A well-organized operator can work with three filters simultaneously. Washes Dries Advantages of the DPF DUO Premium: -> A separate dryer doubles work efficiency -> We are the only ones to offer a large-diameter hose that connects to the DPF. A larger diameter = more water = more effective cleaning Kedpfx Afsxm Szqsfsnf -> Our filter mounting system is free of elements placed inside the DPF filter tube that could block the water flow. This allows the full performance of the water and air pump to be utilized, shortening regeneration time. -> The large cabin provides the freedom to mount the cleaned filter. The operator, based on their experience, can choose the position in which the filter will be washed. -> Protection against excessive pressure in the filter during cleaning -> Protection against lack of airflow through the filter during drying -> Possibility to individually set the cleaning program according to the filter capacity -> Stable securing of the filter during drying -> Three-stage dirty water filtration system -> Water heating controller -> Insulated water tank -> Training at the customer's site can be provided The device enables the removal of soot and ash from DPF/FAP filters without negatively impacting the filter structure, restoring up to 99% of the nominal flow rate. Our technicians have dedicated significant effort to ensure that both the cleaning procedures and the detergents used are safe for the environment and machine operators. The operator checks the filter for mechanical damage using an endoscopic camera. If signs of melting, ceramic core cracks, or other apparent mechanical damage interfering with the DPF are detected, regeneration will not be possible. The regeneration process takes place in a closed chamber equipped with filters preventing harmful contaminants from escaping into the environment. Water with cleaning fluid circulates in a closed loop and is filtered throughout the process, significantly extending bath life. The DPF DUO Premium cleans filters using water, chemistry, and air. A precisely selected, computer-controlled sequence of water and detergent dosing, combined with air and impulses generated by compressed air, ensures high regeneration efficiency. After the cleaning process is complete, an additional device dries the filter with air at 90°C, ensuring complete evaporation of the cleaning solution. After drying, the machine performs a final backpressure measurement. This measurement can also be taken before cleaning, allowing subsequent comparison of backpressure values before and after the process. The device is equipped with a printer that allows generating a measurement report. The washing time for filters from passenger cars or light commercial vehicles is 20–40 minutes, which enables regeneration of up to a dozen filters in 8 hours. High efficiency combined with low operating costs guarantees a rapid return on investment.

Condition: good (used), Year of construction: 1996, control type: CNC control, pipe diameter (max.): 28 mm, Tube diameter: 4-28 mm Knjdpfx Aex H R Hzjffef Wall thickness: / mm Minimum bending radius: 1.5 x D - 2.0 x D mm Control: Siemens LOGO Delivery rate: 4.5 l/min Max. bending angle +/-: 190° Nominal pressure: 250 bar Operating pressure: 3095 bar Delivery rate: 4.5 l/min Total power requirement: 1.5 kW Drive: Hydraulic cylinder and roller chain

Condition: like new (used), functionality: fully functional, resolution (max.): 1,440 dpi, total width: 2,620 mm, total height: 1,311 mm, year of last overhaul: 2025, For sale: EPSON SureColor S80600 – As good as new This professional large-format printer was purchased new and has barely been used. The machine recently underwent a major maintenance service worth €3,500, during which all tubing was completely renewed and replaced. As a result, the printer is in excellent technical condition – ready for years of reliable operation. Kjdox H Nq Ejpfx Affjnf The Epson SureColor S80600 delivers exceptional print quality on a wide range of materials: from standard signage to high-end displays and interior decoration. All components are designed by Epson itself for seamless operation and outstanding professional results. Eco-solvent 160: environmentally friendly ink with a roll width of 160 cm.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 4,236 h, load capacity: 4,000 kg, lifting height: 5,200 mm, free lift: 1,500 mm, load center: 600 mm, fuel type: diesel, mast type: triplex, construction height: 2,450 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,500 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 21X9X15, rear tire type: superelastic tires (black), rear tire size: 28X12,5-15, overall weight: 12,850 kg, empty load weight: 8,850 kg, total height: 2,350 mm, total length: 1,900 mm, total width: 1,650 mm, color: green, Equipment: CE marking, all wheel drive, front guard, head guard, lighting, pallet forks, Looking for a reliable forklift? 🧐 We are specialists in the industry! 💼🔧 We specialize in selling high-quality forklifts, offering proven machines in excellent condition. 💯 Check out our offer and find the perfect equipment for your business! 🏗️ 📌 This listing features: COMBILIFT C4000CB – TRIPLEX 5200mm – Year 2017 – LPG – FREE LIFT – SIDESHIFT – FORK POSITIONER – CONDITION: 5/5 The forklift is in excellent technical condition and ready for immediate use. ✅ 🔧 Key Features and Technical Data: Model: COMBILIFT C4000CB Year of production: 05/2017 Lifting capacity: 4000 kg Mast type: Triplex Lifting height: 5200 mm Drive: LPG Load center: 600 mm Engine manufacturer: G.M. Knodpfx Afsx H Iqqjfsf Power: 74 HP Total weight: 8850 kg Free lift: 1500 mm Tires: Solid, superelastic, in good condition Front tires: Superelastic – 21x9x15 – 100% TREAD Rear tire: Superelastic – 28x12.5-15 – 100% TREAD Overall height (collapsed mast): 2450 mm Technical condition: Fault-free, after service inspection Visual condition: Very good Fork length: 1200 mm Total height: 2350 mm Total length: 1900 mm Overall width: 1650 mm Positioner width: 1500 mm 🛠️ Equipment: Lightning 💡 Adjustable boom 🔩 Pallet forks Heated cabin ❄️🔥 Freelift Sideshift fork 🎯 This forklift is an ideal solution for industries that require efficient handling of long loads in narrow spaces – such as the timber, steel, or tubing industries. Thanks to its multi-directional movement capability, it provides excellent maneuverability and optimal warehouse space utilization. 🔍 Additional Features: Integrated multi-directional steering system Comfortable operator's cabin High reliability in intensive use Perfect for both outdoor and indoor operation 🟢 Condition: Fully operational, regularly serviced, ready to work immediately. 🚛 We offer delivery across Europe and a FREE start-up inspection! 📞 Contact us today to schedule a viewing. 💰 Pricing & Financing: We offer full financing support – including quick leasing and credit decisions, even for new companies or businesses with a challenging financial history. Leasing decision in just 2 hours! Invoicing in EUR/PLN Leasing, startup financing for new businesses We are an authorized supplier for most leasing companies FAST / SIMPLE / AFFORDABLE FINANCING

Condition: new, Year of construction: 2023, Expert High-speed Small Tube Processing With features designed specifically for small tube processing, and a fully automated loading structure, the Q0 Pro significantly improves your production efficiency. Easy and Fast Operation Q0 Pro makes small tube cutting easy. With smart features and simple operations like full servo adjustment, over-edge protection, automatic focus, and lightning piercing, you’ll get fast and smooth cuts every time. Revolutionary Processing Steps Say goodbye to traditional processes like sawing, turning, punching, and drilling. With the Q0 Pro, you get everything in one automated cutting process and double your efficiency. Ksdpfxspvi Sce Affjnf Versatile and Flexible Cutting Our BodorThinker Tube system lets you keep up with customer design demands like never before. Plus, our sleek, compact design not only enhances your workspace but also ensures optimal space utilization. Save Huge Manual Handling and Material Costs Our automated cutting process, high-quality cutting results, and impressive short cutting tailings significantly reduce manual handling costs and leftover material costs. All you need to do is load your material, and let the Q0 Pro handle the rest.

Condition: used, maximum load weight: 31,170 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2022, next inspection (TÜV): 03/2026, loading space length: 13,000 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, 3-axle timber transport trailer * 8x OptiPa bolsters * 16x OptiPa one-piece aluminum stanchions * Stable aluminum bulkhead at the front approx. 2500 mm high * Maximum fifth wheel load approx. 12000 kg * Front overhang (kingpin to front edge of KoRa) 1550m * Air suspension with 3x 9t axles from SAF * Axle reinforcement for off-road * Axle lift first axle, automatic function, with traction aid * Scales * Total weight technically possible 39,000 kg * WABCO Smart Board * EBS braking system * All cables are protected inside the longitudinal beams * Smooth sheet metal cover 3mm welded through between the longitudinal beams * Tires: 6x branded tires size 385/65 R 22.5 * LED reversing lights and work lights * LED tail lights and Position lights * Plastic fender, 180 degrees, above each axle * Underrun protection made of round tube, mounted as high as permitted * Maneuvering coupling at the rear * Ten welded ring elements for lashing on each side * 2x toolbox approx. 600x400x400, plastic * Side impact protection made of anodized aluminum Kedex H E H Njpfx Affenf * KTL coating with zinc phosphating, maximum corrosion protection Also available for rent at short notice. We are happy to provide you with further information

Condition: good (used), AF/Armafix pipe supports, pipe supports -Manufacturer: Armacell, Armafix AF pipe support FX-2-60/64 AF-2 box with 24 pcs. -Article No.: 38407000 -Tube: Ø 60/64 mm -Quantity: 5x box available -Price: per box -Dimensions box: 390/200/H200 mm Ksdpst Acwhefx Affjnf -Weight: 1,5/pc.

Condition: good (used), Year of construction: 2005, control type: CNC control, - Max. bending angle: +/- 180 + 10° - Tube feed length: 4100 mm - Round steel tube up to 30 x 2.2 mm² - Round stainless steel tube up to 30 x 1.5 mm - Square tubes: 20 x 2.5 mm - Bending time for 90 degrees: 1.5 sec (advance) - Longitudinal feed speed: 450 mm/sec - Maximum bending radius: 125 mm - Freestanding bending head, 850 mm long Knjdpex H Rthjfx Affef - Bending axis drive: electrohydraulic

Condition: used, color: orange, Warranty: 24 months Productivity: 100 tph Polygon can produce mobile or fixed asphalt plants with capacities of 60-240 tons/ h quality asphalt plant are produced with experienced staff. Polygon batch Mix Asphalt Plants Advantages Optimum price, high performance Precision weighing and high quality blend High efficiency rotary dryer and burner Easy Maintenance 7-24 after sale support Possibility of asphalt mixing plant spare parts at reasonable prices Operator friendly asphalt plant automation system Easy assembly and disassembly possibility Products suitable for different asphalt production (mastic asphalt, colored asphalt, recycling​ Aggregates are typically moved from the stockpiles to the cold feed bin using a front-end loader. Cold feed bins are used to dosage the different aggregates used in the mix to the drying drum. Our Advantages; Thanks to its functional design, it facilitates transportation and installation. Attachments have bolted design. Thanks to its high strength silo casing and twisted body undergoes no change in shape under load. Thanks to the frequency-controlled dosing bands, each material can be supplied in any desired rate. The flame size of the dryer burner can be controlled automatically with the measurement sensor (optional)​ Polygon asphalt plant mixer provides long wear parts life and homogeneous blend. Features; Heavy duty group high quality reducer. Heat and abrasion resistant inner liners Long life arms and paddles Double-valved discharge system Discharge valve with external resistance heating Polygon-asphalt plant filter system separates the gas and dust generated during asphalt production. The decomposed filler dust can be used in mixture if desired. Knodpfx Ajx D A N Tsffjf Features; Input and output temperature measurement Clean air valve to protect bags from burns Nomex filter bags with vertical casette Dust-proof design Easy bag changing Reverse air flow bag cleaning system Insulation suitable for climate conditions and heat transfer ​The dust collection system includes supporting feet for easy installation and implementation. The filter dust collection system is perfectly tailored to the mixing plant capacity. The vertical layout-of the filter bags guarantees maximum utilisation of the surface area with efficient filter function. Polygon dryer creates a maximum heat transfer surface thanks to its special wing design. With minimum fuel consumption, it allows the removal of humidity of aggregate and heat it up to the desired temperature. Our Advantages; Dryer rollers and rings are manufactured from long-life forged steel. Easily interchangeable bolt-type compensation springs that distributes body load evenly Suitable for stainless steel insulation coating and heat transfer, rockwool covered body With soft starter support, operation without problem under load Automatically adjustable burner according to humidity and amount of aggregate (optional The drum tube, which is made of a thick-walled, solid steel construc- tion, achieves maximum efficiency, very low exhaust gas temperatures and prevents temperature losses during the...

Condition: ready for operation (used), Year of construction: 2017, General Data Machine weight 8300 kg Additional Equipment Kedpfx Asx D Nxujffonf RDS arm control software Portable laptop configured for operation This ROMER Absolute Arm 7730 was manufactured in 2017. It features a 3.0 m measurement range, volumetric accuracy of ±0.040 mm, and weighs 8.3 kg. Designed for ease of use with a Zero-G counterbalance, carbon fiber tubes, and continuous rotation of the main axis. Includes a mobility package with batteries and Wi-Fi, and a magnetic base for versatile mounting. If you are looking to get high-quality measuring capabilities consider the ROMER Absolute Arm 7730 machine we have for sale. Contact us for more information. Application Types Measuring

Condition: used, maximum load weight: 31,160 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 12/2020, next inspection (TÜV): 03/2026, loading space length: 13,000 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, 3-axle timber transport trailer * 8x OptiPa bolsters * 16x OptiPa one-piece aluminum stanchions * Stable aluminum bulkhead at the front approx. 2500 mm high * Maximum fifth wheel load approx. 12000 kg * Front overhang (kingpin to front edge of KoRa) 1550m * Air suspension with 3x 9t axles from SAF * Axle reinforcement for off-road * Axle lift first axle, automatic function, with traction aid Knjdox H E H Aopfx Affof * Scales * Total weight technically possible 39,000 kg * WABCO Smart Board * EBS braking system * All cables are protected inside the longitudinal beams * Smooth sheet metal cover 3mm welded through between the longitudinal beams * Tires: 6x branded tires size 385/65 R 22.5 * LED reversing lights and work lights * LED tail lights and Position lights * Plastic fender, 180 degrees, above each axle * Underrun protection made of round tube, mounted as high as permitted * Maneuvering coupling at the rear * Ten welded ring elements for lashing on each side * 2x toolbox approx. 600x400x400, plastic * Side impact protection made of anodized aluminum * KTL coating with zinc phosphating, maximum corrosion protection Also available for rent at short notice. We are happy to provide you with further information

Year of construction: 2009, condition: good (used), hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Pressure force: at 250 bar 96 to -Piston diameter: 220 mm -Piston rod: Ø 125 mm -Cylinder tube outside: Ø 260 mm -stroke: 495 mm -Total length retracted center hole: 1195 mm -Piston rod mount: Ø 100 mm -Cylinder mount: Ø 100 mm Kjdpfjdq U S Iox Affenf -universally applicable: -Number: 15x cylinders available -Price: per piece -Dimensions: 1360/530/H300 mm -Weight: 364 kg/piece

Condition: good (used), Year of construction: 2008, control type: CNC control, Stainless steel tube diameter: up to 42 x 2.0 mm Steel tube diameter: up to 42 x 3.0 mm Knodox H Rtbjpfx Affjf Max. bending angle: +/- 180 + 10° Section modulus: 4.1 ccm Operating pressure: 6 bar Total power requirement: 5.5 kW Machine weight approx.: 3 t Space requirement approx.: 6100 x 2300 x 1300 mm

Condition: ready for operation (used), Year of construction: 2020, General Data Measurements width 5500 mm Knjdjx D Nuiopfx Affjf Measurements depth 8100 mm Measurements height 2500 mm Main Drive Number of axis 4 Additional Equipment Dust & Fume Extraction System: Air Flow: 12000 m³/h Filter Area: 171 m² This 4-axis Baykal BPS-3006 was manufactured in 2020, featuring a CNC Plasma Cutting Machine with a cutting table size of 3000 × 6000 mm. It includes a rotary axis for tube and pipe cutting and is equipped with a Hypertherm HPR 130XD plasma source. If you are looking to get high-quality cutting capabilities, consider the Baykal BPS-3006 machine we have for sale. Contact us for more information about this machine. Application Types Cutting

Condition: used, maximum load weight: 31,170 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2021, next inspection (TÜV): 03/2026, loading space length: 13,000 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, 3-axle timber transport trailer Ksdpfx Afex H E Hiofjnf * 8x OptiPa bolsters * 16x OptiPa one-piece aluminum stanchions * Stable aluminum bulkhead at the front approx. 2500 mm high * Maximum fifth wheel load approx. 12000 kg * Front overhang (kingpin to front edge of KoRa) 1550m * Air suspension with 3x 9t axles from SAF * Axle reinforcement for off-road * Axle lift first axle, automatic function, with traction aid * Scales * Total weight technically possible 39,000 kg * WABCO Smart Board * EBS braking system * All cables are protected inside the longitudinal beams * Smooth sheet metal cover 3mm welded through between the longitudinal beams * Tires: 6x branded tires size 385/65 R 22.5 * LED reversing lights and work lights * LED tail lights and Position lights * Plastic fender, 180 degrees, above each axle * Underrun protection made of round tube, mounted as high as permitted * Maneuvering coupling at the rear * Ten welded ring elements for lashing on each side * 2x toolbox approx. 600x400x400, plastic * Side impact protection made of anodized aluminum * KTL coating with zinc phosphating, maximum corrosion protection Also available for rent at short notice. We are happy to provide you with further information

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Cylinder: approx. Ø 90 mm -Piston rod: Ø 60 mm -Pipe outer diameter: 120 mm -Stroke: 940 mm -Total length when retracted: 1510 mm Knodpjchaynjfx Affjf -Piston tube mounting: Ø 25 mm -Piston rod mounting: Ø 35 mm -Ideal for building a hydraulic press -Quantity: 1 piece available -Weight: 80 kg

Condition: good (used), control type: CNC control, controller manufacturer: Siemens, controller model: 840 D, pipe diameter (max.): 168 mm, Pipe diameter: 168.3 x 11 mm Pipe insertion length: 6000 mm Maximum bending radius: 700 mm Control system: Siemens 840 D Minimum bending radius: 80 mm Maximum bending angle +/-: 190 ° Connected load: 400 V / 50 Hz / 85 A Dimensions (L/W/H): 11.9 x 2.7 x 2.45 m Machine weight approx.: 33 t Additional information: - CNC control: CNC MMI Multicontrol 2000 - Control system NCU - PLC: Siemens Simatic S7 - Electrical connection: 400V / 50 Hz / 85 A The machine is fully automatic and equipped with a tool changer. The following tooling is available: Pipe Ø 48.3 mm; Radius 105 mm Pipe Ø 60.3 mm; Radius 120 mm Pipe Ø 63.5 mm; Radius 150 mm Pipe Ø 76.1 mm; Radius 190 mm Pipe Ø 88.9 mm; Radius 222 mm Pipe Ø 114.3 mm; Radius 285 mm Pipe Ø 139.7 mm; Radius 350 mm Pipe Ø 141.3 mm; Radius 700 mm Pipe Ø 168.3 mm; Radius 420 mm A few mandrels have a direct engraved marking. These have the following specifications: Knedsx H Rrqspfx Affef 88.9 x 8 mm; 88.9 x 4.5 mm; 114.3 x 8.8 mm; 139.7 x 8.8 mm; 168.3 x 12.5 mm; 168.3 x 8.8 mm The following outside diameters of the mandrels were measured: 23.2 mm; 32.3 mm; 37.1 mm; 41.5 mm; 59.3 mm; 70.3 mm; 77.7 mm; 80.9 mm; 88.7 mm; 93.2 mm; 94.7 mm; 103.0 mm; 112.8 mm; 118.8 mm; 128.9 mm; 138.5 mm; 147.2 mm; 153.6 mm The accessory package is valued at approximately €150,000.

Condition: ready for operation (used), Year of construction: 2017, Control Unit Brand MAZATROL Ksdpfex D Emuox Affonf Movement X-Axis Movement 615 mm Y-Axis Movement 260 mm Z-Axis Movement 1585 mm W-Axis Movement 1574 Additional Equipment Overload detection system / M-coolant (equipped) prep M-thru 7MPa / Mazak Monitoring System B (RMP600) / Mazacheck / C-axis through milling head during rotation / M-code to be switched coolant/air thru / Ethernet operation function / B) Cylindrical & Polar Coordinate (EIA) / 5-Axis Machining Package for SmoothX / Signal Tower (3 colors lights, square) / 2nd Spdl C-Ax. Sync (fact. install only) / Raw/tube connection parts til 1 & 2nd spindle / Mayfran, Consep2000 side / Mayfran, Variflow HP Pack #1 (7 variable flow/pressure stages), 7.5 K/ Mayfran, HP Twin in-line cartridge filter upgrade / Mayfran, coolant gun This 5-axis Mazak Integrex i-400S was manufactured in 2017, featuring a 1500 mm bed, 72 Capto-tool magazine, and a Mazak Monitoring System B. It includes a 5-axis machining package for SmoothX and Ethernet operation functionality. If you are looking to get high-quality turn-mill capabilities, consider the Mazak Integrex i-400S machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, maximum load weight: 31,170 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 11/2020, next inspection (TÜV): 03/2026, loading space length: 13,000 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, 3-axle timber transport trailer * 8x OptiPa bolsters * 16x OptiPa one-piece aluminum stanchions * Stable aluminum bulkhead at the front approx. 2500 mm high * Maximum fifth wheel load approx. 12000 kg * Front overhang (kingpin to front edge of KoRa) 1550m * Air suspension with 3x 9t axles from SAF * Axle reinforcement for off-road Knjdpfxox H E E Sj Affof * Axle lift first axle, automatic function, with traction aid * Scales * Total weight technically possible 39,000 kg * WABCO Smart Board * EBS braking system * All cables are protected inside the longitudinal beams * Smooth sheet metal cover 3mm welded through between the longitudinal beams * Tires: 6x branded tires size 385/65 R 22.5 * LED reversing lights and work lights * LED tail lights and Position lights * Plastic fender, 180 degrees, above each axle * Underrun protection made of round tube, mounted as high as permitted * Maneuvering coupling at the rear * Ten welded ring elements for lashing on each side * 2x toolbox approx. 600x400x400, plastic * Side impact protection made of anodized aluminum * KTL coating with zinc phosphating, maximum corrosion protection Also available for rent at short notice. We are happy to provide you with further information

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston rod: Ø 50 mm -Piston tube outer diameter: Ø 135 mm -Stroke: 300 mm Knsdjb A Itvspfx Affsf -Weight: 52 kg

Condition: good (used), Year of construction: 2000, Tube diameter: 76.1 mm Tube insertion length: 4500 mm Max. bending radius: 200 mm Knedpfx Afox H Rq Tofjf Bending direction: right Machine weight approx.: 1.7 t Additional information Control: electronic 1-axis control

Condition: ready for operation (used), Year of construction: 2008, operating hours: 12,125 h, Control Unit Brand SIEMENS Model SINUMERIK 840D Controller Brand SINUMERIK 840D Main Drive Spindle speed range 0-5000 rpm Spindle motor power 29 kW Number of axis 6 Additional Equipment Tool turret: 12-position tool VDI 30 radial with directional logic for up to 12 driven tool stations B-PowerMill: Motorised milling spindle with 24-position tool magazine, 210° swivelling range Optional tool package: Includes stationary and driven tool holders, collet chuck holders, reducing sleeves, and operating spanners Hollow clamping cylinder with draw tube / Part ejector and flushing through the counter spindle / Part pick-up device for finished parts Part pick-up device for finished parts / Coolant device in the chip conveyor / High-pressure pump (14 bar) and fine filter Flushing pumps (3.7 bar) / Control cabinet air conditioning unit / Electrostatic oil mist separator Hydraulic unit / Machine light / Interface for foot switch / Signal lamp Documentation including handwheel, PC keyboard, network preparation, tool monitoring, turning window, cleaning gun Clamping device for main spindle: Hainbuch BZI 80 centre pull / This 6-axis EMCO Hyperturn 665MC Plus turn-mill centre was manufactured in 2008. It features a multi-axis CNC system with Y-axis and B-axis for complete machining of turned and milled parts. Equipped with integrated spindle motors on both main and counter spindles, it offers a spindle speed up to 5000 min-1 for the main and 7000 min-1 for the counter spindle. Includes a 24-position tool magazine and SINUMERIK 840D control. If you are looking to get high quality turning and milling capabilities consider the EMCO Hyperturn 665MC Plus machine we have for sale. Contact us for more information about this machine. Application Types Kjdpjx D Hwnjfx Affonf Turning

Condition: used, maximum load weight: 31,170 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 05/2022, next inspection (TÜV): 02/2026, loading space length: 13,000 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, 3-axle timber transport trailer * 8x OptiPa bolsters * 16x OptiPa one-piece aluminum stanchions * Stable aluminum bulkhead at the front approx. 2500 mm high * Maximum fifth wheel load approx. 12000 kg * Front overhang (kingpin to front edge of KoRa) 1550m * Air suspension with 3x 9t axles from SAF * Axle reinforcement for off-road * Axle lift first axle, automatic function, with traction aid * Scales * Total weight technically possible 39,000 kg * WABCO Smart Board * EBS braking system * All cables are protected inside the longitudinal beams * Smooth sheet metal cover 3mm welded through between the longitudinal beams * Tires: 6x branded tires size 385/65 R 22.5 * LED reversing lights and work lights * LED tail lights and Position lights * Plastic fender, 180 degrees, above each axle * Underrun protection made of round tube, mounted as high as permitted Knedpfx Afjx H E Hpsfjf * Maneuvering coupling at the rear * Ten welded ring elements for lashing on each side * 2x toolbox approx. 600x400x400, plastic * Side impact protection made of anodized aluminum * KTL coating with zinc phosphating, maximum corrosion protection Also available for rent at short notice. We are happy to provide you with further information

Condition: used, maximum load weight: 31,170 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 09/2021, next inspection (TÜV): 02/2026, loading space length: 13,000 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, 3-axle timber transport trailer * 8x OptiPa bolsters * 16x OptiPa one-piece aluminum stanchions * Stable aluminum bulkhead at the front approx. 2500 mm high * Maximum fifth wheel load approx. 12000 kg * Front overhang (kingpin to front edge of KoRa) 1550m * Air suspension with 3x 9t axles from SAF * Axle reinforcement for off-road Kedpfx Afox H E Hcjfsnf * Axle lift first axle, automatic function, with traction aid * Scales * Total weight technically possible 39,000 kg * WABCO Smart Board * EBS braking system * All cables are protected inside the longitudinal beams * Smooth sheet metal cover 3mm welded through between the longitudinal beams * Tires: 6x branded tires size 385/65 R 22.5 * LED reversing lights and work lights * LED tail lights and Position lights * Plastic fender, 180 degrees, above each axle * Underrun protection made of round tube, mounted as high as permitted * Maneuvering coupling at the rear * Ten welded ring elements for lashing on each side * 2x toolbox approx. 600x400x400, plastic * Side impact protection made of anodized aluminum * KTL coating with zinc phosphating, maximum corrosion protection Also available for rent at short notice. We are happy to provide you with further information

Condition: used, maximum load weight: 31,170 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2021, next inspection (TÜV): 03/2026, loading space length: 13,000 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, 3-axle timber transport trailer * 8x OptiPa bolsters * 16x OptiPa one-piece aluminum stanchions * Stable aluminum bulkhead at the front approx. 2500 mm high * Maximum fifth wheel load approx. 12000 kg * Front overhang (kingpin to front edge of KoRa) 1550m * Air suspension with 3x 9t axles from SAF * Axle reinforcement for off-road * Axle lift first axle, automatic function, with traction aid * Scales * Total weight technically possible 39,000 kg * WABCO Smart Board * EBS braking system * All cables are protected inside the longitudinal beams * Smooth sheet metal cover 3mm welded through between the longitudinal beams * Tires: 6x branded tires size 385/65 R 22.5 * LED reversing lights and work lights * LED tail lights and Position lights * Plastic fender, 180 degrees, above each axle * Underrun protection made of round tube, mounted as high as permitted * Maneuvering coupling at the rear * Ten welded ring elements for lashing on each side * 2x toolbox approx. 600x400x400, plastic * Side impact protection made of anodized aluminum * KTL coating with zinc phosphating, maximum corrosion protection Also available for rent at short notice. Kjdpfx Aon I Id Eeffsnf We are happy to provide you with further information