Used Trumpf Trumatic for sale (387)

Condition: used, functionality: fully functional, Year of construction: 2018, This offer includes a complete industrial laser marking system from the TRUMPF TruMark series – comprising a TruMark 5000 laser source and a TruMark 5020 control/power supply unit. The TruMark series is known for precise, permanent, high-contrast marking on a wide variety of materials in industrial environments. Both devices are equipped with original TRUMPF type plates and are in well-maintained used condition. Technical Data TruMark 5020 – Control / Power Supply Unit Model: TruMark 5020 Mains connection: 100–240 V, 50/60 Hz Current consumption: 7 A Power: 600 W Protection rating: IP54 Serial number: L1150E2020 Year of manufacture: March 2018 Certification: CE, 21 CFR Chapter 1, Subchapter J TruMark 5000 – Laser Source Model: TruMark 5000 Serial number: 0N510-2779-02 Dsdoxxp Eqspfx Ab Tecr Wavelength: 1040–1200 nm Average output power (Po): ≤ 120 W Pulse power (Pp): ≤ 50 kW Pulse duration (t): ≥ 1 ns Frequency range (F): ≤ 1000 kHz Standard: IEC 60825-1:2014 (Laser Safety)

Condition: good (used), functionality: fully functional, Year of construction: 2003, Do you have a problem with the resonator on your TRUMPF laser cutting machine with 5 kW output? Then you’ve come to the right place! Dsdpfx Aoxzivbjb Tecr TruFlow 5000 / 5 kW resonator for TRUMPF laser cutting machines (L 3050 / L 4050 / L 6050 / TruLaser 5030 / 5040 / 5060) Power measurement during machine dismantling: 5,462 W (end of October 2025) (The machine still delivered 4,930 watts at the cutting head. The resonator is in very good condition in terms of output.) Leak test: 0.02 hPa If you would like to replace your resonator or if you have issues with your turbine, feel free to contact us. All parts are available at short notice.

Condition: used, Year of construction: 2018, controller model: , _____ Description: Year of manuf. : 2018 Control : Technical data Upper tools:60 spaces Lower tools:48 spaces Description :Sturdy steel architecture with concrete foundation :Right-hand installation :Upper tool storage with CNC rotary axis :Lower tool storage with CNC rotary axis :Push chain manipulators for upper and lower tools Dcedpfsxxft Dox Ab Tjr :Magnetic gripper system :Positioning monitoring :CNC turning and transfer station for upper tools :Transfer station for lower tools :LENZE control system, linked to TruBend machine control system :Integrated into machine design :Control cabinet air conditioning up to ambient temperature 40 °C :Safety light curtain (vertical and horizontal) with fixed reflector

Condition: good (used), functionality: fully functional, Year of construction: 1997, operating hours: 19,891 h, machine/vehicle number: 885170, control type: CNC control, controller manufacturer: Delem, bending force (max.): 130 t, working width: 3,050 mm, stroke length: 365 mm, throat depth: 410 mm, distance between stands: 2,700 mm, installation height: 535 mm, operating speed: 10 mm/s, reverse speed: 200 mm/s, number of axes: 4, table height: 970 mm, type of crowning: CNC-controlled, travel distance X-axis: 600 mm, back gauge adjustment: CNC-controlled, back gauge: 260 mm, overall weight: 12,950 kg, total length: 3,600 mm, total width: 2,250 mm, total height: 3,000 mm, power: 12.5 kW (17.00 HP), input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, number of support arms: 2, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, Technical data: Dsdpfx Asxdhk Asb Tecr - Max. working length: 3050 mm - Frame opening: 2700 mm - Max. pressing force: 1300 kN - Throat depth: 410 mm - Ram stroke: 365 mm - Pneumatic connection: 6 bar - Space requirement approx. W 3800 x H 2900 x D 2400 mm - Weight approx. 13,000 kg - 4-axis CNC control DELEM - Two-hand control panel with 2 foot switches - Crowning device - Controlled back gauge with height adjustment - Hydraulic upper and lower tool clamping - Die table movement pneumatically assisted - Indicated operating hours: 19,891 h - Hydraulic tool clamping top and bottom - Program-controlled lower tool displacement (I-axis) for 2 positions

Condition: good (used), Year of construction: 2023, operating hours: 5,001 h, functionality: fully functional, X working area max.: 3000 mm Y working area max.: 1500 mm Control: TRUMPF Control based on Rexroth IndraMotion MTX Machine: - Closed machine frame - Hybrid axis system - Linear magazine with 24 slots for clamps and tools - Hydraulic clamps (3 pieces) - Drives with maintenance-free three-phase motors - Repositioning with programmable hold-down device - Foot pedal for clamp closing - Parts chute on the right Punching Head: - Delta Drive - Rotatable mono-tool holder - Programmable hold-down position - Tool length compensation - Punch lubrication spray system - Punch slug extraction - Forming function - Stroke counter for punches Control: - TRUMPF Control based on Rexroth IndraMotion MTX - Touch panel with 19" TFT color display - Touchpoint - Programmable cutting gas pressure - Automatic shut-off - Remote support interface - Program management - Production planning Data Transmission: - USB interface - RJ-45 network interface - Central Link - Online Update Manager Safety: - CE marking and EC Machinery Directive - Dual-beam safety light curtain Extended Standard Equipment: - 1st positioning pin (inside right) + Brush tables + MultiTool + Thread forming with thread counter + Thread-former breakage monitoring + Lubricant level monitoring + Marking/rapid beading + Deburring and rolling technology + Adaptive stroke calibration + Die lubrication spray system + Smart Punch Monitoring + Parts flap on the left + Parts conveyor belt for parts flap left + Collection tray for parts conveyor left + Sensor for parts chute + Parts conveyor for parts chute right + Additional clamp + 4x individually openable clamps + 4x height-adjustable clamps + Automatic clamp closing loading sensor system + Optical loading sensor Dedpfexxbwxjx Ab Tocr + Automatic repositioning movement to compensate for loading tolerance + Repositioning device for DeltaDrive + Vibration-dampened installation + Chip conveyor with tilting bin + Machine status light + Warpage detection + Wireless Operation Point SheetMaster Compact 3000 x 1500 (AK05): - Loading station with spreading magnet for sheet separation - Suction frame - Vacuum sensors - Double sheet detection - Unloading cart for residual grids and microjoint sheets - Second operator station for loading and unloading + Compact setup for light grid and reference point system + Peeling system SortMaster Compact: - Machine-integrated automated small part removal - Suction frame for unloading good parts up to 600 x 400 mm (X x Y) - 2 suction bars (each suction cup individually controllable) - Unloading area 600 x 800 mm - Vacuum sensors for the suction circuits + X-axis extension - Extension of the unloading area to 1200 x 800 mm

Condition: used, functionality: fully functional, Year of construction: 2015, Machine - Enclosed machine frame - Automatic pallet changer in longitudinal direction - Torque drive in combination with linear direct drives - Enclosed beam guidance using fiber optic cable (LLK) - Machine cooling unit (water-air) - Integrated control cabinets with interior lighting - Power supply to TruDisk via the machine - Longitudinal conveyor belt - Work area lighting - Positioning laser diode - Oil spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning - Transport and assembly device TRUMPF Laser - Solid-state laser TruDisk with 1 fiber optic output - Laser cooling unit (water-air) - Excitation via pump diodes - Laser power control Cutting Unit - Universal cutting unit with fully adaptive lens system - Single cutting head strategy - Protective glass against lens contamination - Protective glass condition monitoring - ControlLine: height control and sheet metal edge detection Control - Advanced workshop programming (TruTops via network access) - Fast repeat production - 17" touch color screen - Integrated technology data - Automatic shut-off - Programmable selection of cutting gas/pressure - ContourLine - Microweld - FastLine - FlyLine - AdjustLine - Teleservice via Internet - Integrated e-shop Data Transfer - USB interface - RJ-45 network socket Safety - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extractor - Machine enclosure with certified viewing window (right door) - Roll-up roof Special Equipment: • 3001 on TruDisk 4001 • Extended pallet extraction • Dust protection device panel • Viewing window left • Side viewing windows right • Storage interface Djdpfjxw Uryex Ab Tecr • Brightline Fiber • Titanium cutting package • Brass cutting package • Copper cutting package • Nozzle changer

Condition: excellent (used), functionality: fully functional, We offer a highly productive 3D printer for industrial series production. The system was finally used with AISi10MG aluminum powder. The 3D printer has already been disassembled by the manufacturer. Disassembly and functional reports are available, proving that the machine was in operation prior to disassembly. All axes are properly secured. The machine can be transported on a standard truck. Dodpevu Syyofx Ab Tecr TruPrint 5000 G4 Serial number S0731C0008 Year of manufacture 08/2018 Laser runtime Laser 1 beam on: 5165 hours Laser 2 beam on: 5096 hours Laser 3 beam on: 5023 hours Trumpf TruPrint 5000 with the Powder Bed Monitoring and Melt Poll Monitoring options, including a filter system. Accessories: 2x build cylinders 3x Dosing cylinder 1 used overflow tank 1 new overflow tank Manuals 4 new heat exchangers 2 new Easy Filters 3 new NTRON SIL02 Oxygen Analyzers + Sensors 1 new oxygen sensor and much more, such as seals, etc. The Armanni CAR.Elev. pallet truck for changing the tanks is also in stock and can be offered as an option. Get high-quality 3D components faster The highly productive, semi-automated TruPrint 5000 3D printing system prepares you for industrial series production. With features such as an optional 500°C preheater and full-field multi-laser configuration with three 500-watt TRUMPF fiber lasers, you are ideally equipped for the most demanding industrial applications. The machine produces high-quality components from a variety of metallic materials quickly and reliably, meeting the high quality standards in tool and mold making, including 3D printing on preform blanks, in the aerospace and medical technology industries. Optionally, the entire process chain can take place in a protective gas atmosphere: screening, printing, cooling, and depowdering. Combined with external parts and powder management and monitoring solutions from TRUMPF, it is ideal for industrial additive series production. Thanks to the Preform option, the TruPrint 5000 supports hybrid component production. The component structures to be additively manufactured are applied to a blank. This innovative option is particularly well-suited for easy handling in tool and mold making. TruPrint 5000 Build volume (cylinder) mm x mm Ø 300 x H 400 Ø 290 x H 390 (Reduction if preheating >200 °C) Processable materials[1] Weldable metals in powder form, such as: stainless steels, tool steels, aluminum, nickel-based, or titanium alloys Build-up rate[2] cm³/h 5 - 180 Layer thickness[3] μm 30 - 150 Max. laser power at the workpiece (TRUMPF fiber laser) W 3 x 500 Beam diameter[3] μm 100 - 500 Min. measurable oxygen content ppm Up to

Year of construction: 2000, condition: used, Tool holder underneath for punching laser machine TC 600L used. Djdobh Hf Njpfx Ab Tocr

Condition: excellent (used), Trumpf Vectormark laser marker spare part carrier Here we offer you a Trumpf Vectormark laser marker. Trumpf Vectormark Trumpf VMc2 Type: VMc2 Condition: Spare part carrier Scope of supply: (See picture) (Changes and errors in the technical data, specifications are reserved!) We can answer further questions on the phone for you. Dsdpsfn Rhaofx Ab Tjcr

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, Press force: 230 t Bending length: 3,230 mm Distance between uprights: 2,690 mm Stroke: 445 mm Installation height: 615 mm Total power requirement: 42 kVA Machine weight approx.: 19,200 kg Machine height: 3,300 mm Equipment: - Trumpf TASC 6000 control - 2 bending aids - Wila tool clamping (top and bottom) - Two-hand/foot operation - Matrix shifting - Lasersafe safety system in front of the machine - Side safety doors Dsdpfoxwvzisx Ab Tecr - 6-axis backgauge

Condition: good (used), functionality: fully functional, Year of construction: 2005, control type: CNC control, installation height: 615 mm, pressing force: 320 t, Bending length [mm] 4220.00 Press force [tons] 320 Control unit TRUMPF TASC 6000 Hydraulic hours [h] 53,030 Standard equipment: - Rigid machine frame, all-steel welded construction - Press beam with high bending strength - Spherical mounting of the press beam with beam tilt capability - Electro-hydraulic top drive with 4-cylinder technology Dcodpfx Aboxxbr Ao Tjr - Proportional valve technology and switchable double pump - Modern block hydraulics with control valves mounted on the cylinder - Electronic pressure scale - Measuring system with centrally mounted glass scales and temperature compensation - Manual, integrated wedge crowning in the bed - "New Standard Clamping" manual, hardened, self-centring upper tool clamping system for vertical tool change - Lower tool clamping with hydraulic clamping, hardened - Programmable lower tool displacement (pneumatic, 2 positions) - 2-axis backgauge system with rack-and-pinion drive for X and R axes, 2 stop fingers, safely adjustable from the front - Machine control: TASC 6000 - Operator console with LCD keypad, emergency up, down and E-stop foot switch - Safety features: integrated side doors and automatic rear roller cover - Control cabinet cooling - Oil cooler - Modern machine design + 5-axis backgauge system + Hydraulic upper tool clamping + CNC crowning + BendGuard + 2 support consoles + Park position + 1 bending aid + Additional foot switch

Condition: used, Tool presetting devices for Trumpf punches and dies. Price per unit: €300.00 net Dcsdpfexk Tycsx Ab Tsr

Condition: excellent (used), Trumpf Type: TruPrint 3000 G02 The machine is in very good condition and has been professionally tested for functionality in-house by a TRUMPF technician. We provide a 6-week warranty on the machine. Year of manufacture: 11/2017 Beam switched on: 17,731 hours Laser Metal Fusion Machine (Metal 3D Printing) Flexible solution for industrial additive manufacturing The TruPrint 3000 is a universal medium-format machine (LMF / PBF / LPBF) with industrial part and powder management. You can now benefit from even greater flexibility, quality, and productivity for your additive series production: Productivity is almost doubled, regardless of the part geometry, and part costs are significantly reduced. Automatic monitoring and calibration of the multi-lasers during the ongoing build job enables optimal quality for printed multi-laser components. The latest developments in inert gas flow further increase component quality and part reproducibility. This is documented parallel to the build job using melt pool monitoring. This allows compliance with documentation requirements, such as those in the medical field. The TruPrint 3000 is highly flexible and adapts to the individual requirements of our customers. With a build volume of 300 mm in diameter and 400 mm in height, it is used in a wide variety of industries. Depending on the component size and complexity, your workflow preferences, and production volumes, you can flexibly choose between internal or external unpacking – all under inert gas. With the latter, you also minimize 3D printer downtime by working parallel to production. Technical Specifications: TruPrint 3000 Build Volume (Cylinder): Diameter 300 mm x Height 400 mm Processable Materials: Weldable metals in powder form, such as: stainless steels, tool steels, aluminum, nickel-based, cobalt-chromium, copper, titanium, or precious metal alloys. Current material and parameter availability upon request. Preheating (standard) Up to 200°C Maximum laser power at the workpiece (TRUMPF fiber laser) 500 W Beam diameter 100 - 500 μm Layer thickness (individually adjustable) 20 - 150 μm Exposure speed (powder bed) 3 m/s Build-up rate 5 - 60 cm³/h Connection and consumption Electrical connection (voltage) 400/460 V Electrical connection (current) 32 A Electrical connection (frequency) 50/60 Hz Shielding gas: Nitrogen, Argon Dcjdpfx Abovvl I To Tsr Design Dimensions (including filter) (W x H x D) 3385 mm x 1435 mm x 2225 mm Weight (including powder) 4300 kg The system was dismantled by the manufacturer; disassembly and functional reports are available. All axles are professionally secured. The system was constructed with 1.44.04 steel and, most recently, AlSi10Mg. Available from March 2025 Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: good (used), Year of construction: 1999, operating hours: 52,324 h, functionality: fully functional, X working area max.: 1270 mm Y working area max.: 1270 mm Dcjdpfsxxbdlox Ab Tor Control: Bosch Type 3 Basic Standard equipment: - Robust C-frame - Safety light barriers - Coordinate guide with integrated linear magazine - 2 clamping claws - Automatic tool changer - Automatic repositioning - Tool length compensation - Forming capability - Mono tool holder with 360° rotation for all tools - Programmable hold-down device - Multitool drive - Punch slug extraction - Brush tables - Part chute 200 x 200 mm, sorting of parts into 2 containers - NC-controlled, digital, maintenance-free three-phase drives - Network interface RJ34 - 3.5" floppy disk drive - TOPS 2000 graphical programming - Online diagnostics via modem - Operating manual + Vibration-damped installation + Multitool + Thread forming + Start post

Year of construction: 2000, condition: good (used), Spare part for Sheetmaster and Gripp Trumpf medium format TC 600L / TC 500R, suction plate complete , with suckers, suction plate, valves, controllers, gearboxes, motors Y / X axis with gearbox and rotator, light barriers, claws,air cylinders etc. see pictures Dcodjh Dixgopfx Ab Tor

Condition: used, Trumpf TRUMPF TruDisk 6602 (4C) High-Power Disk Laser with up to 6.6 kW Type: TruDisk 6602 (4C) The TRUMPF TruDisk 6602 (4C) is a high-performance disk laser offering approximately 6.6 kW of continuous power output – perfectly suited for welding, cutting, and surface treatment processes for metals such as steel, aluminum, copper, etc. System type: TruDisk 6602 (4C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: November 2012 Drawing number: 20-10-02-A5 Dcsdpfxswy Uyxs Ab Tsr No further in-house inspection has been performed. Operating hours could not be read out. The laser was operating flawlessly until decommissioning. Key Technical Features: • Power: Continuously adjustable from 80 W up to 6,600 W, max. 6.6 kW for machine tool applications • Beam quality: < 2 mm·mrad for excellent focus handling • Wavelength: 1030 nm (infrared), adaptable to green wavelength for specific models • Output options: Up to 4 laser outputs (4C) for simultaneous supply of multiple process cells • Cooling system: Integrated heat exchanger (up to 28°C inlet temperature), optional compressor cooling (up to 38°C) • Modular and service-friendly: Compact footprint (< 1 m²), modular components for fast maintenance and service Benefits & Applications • Maximum process stability: Real-time power regulation ensures reproducible results • Reflection resistance: Patented resonator design enables welding of reflective metals such as copper and aluminum • Industry 4.0 ready: Sensor-integrated monitoring system, OPC-UA interface for condition monitoring & predictive maintenance • Energy efficiency: Up to 50% reduction in power consumption thanks to intelligent pulse control and energy-saving modes • Versatility: Application range includes welding (including BrightLine for nearly spatter-free seams), cutting, hardening, casting processing, additive manufacturing, laser wire deposition welding, and more Suitable Use Cases: Ideally suited for industrial high-power laser applications: Application | Features ---|--- Automotive structural part manufacturing | Deep penetration welding with high reproducibility Copper welding | Particularly suitable with green wavelength (> 95% spatter reduction) Remote hybrid welding | Fast processing of large surfaces with robust beam Additive manufacturing & hardening | Enabled by excellent beam quality and compact design Main Technical Data Property | Specification ---|--- Laser power | Up to 6,600 W (6.6 kW), continuous Beam quality | < 2 mm·mrad Wavelength | 1030 nm (infrared) Number of outputs (4C) | Up to 4 simultaneously usable fiber outputs Fiber connector diameter | 100–600 µm (depending on configuration) Beam delivery | Fiber-based, passive (no deflection mirrors required) Cooling | Water/air-cooled, internal or external chiller Dimensions | Approx. 1000 × 800 × 2100 mm (W×D×H, variant-dependent) Weight | ~800–1200 kg (excluding cooling) Power supply | 380 V - 10% ... 460 V +10%, 3-phase AC + PE, 38 kW / 41 kVA, 59 A / 400 V, 50–60 Hz Control | TruControl 1000/3000, OPC-UA interface Safety standards | Laser safety class 4 according to EN 60825-1 Weight: approx. 1200 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data. Information may be subject to alteration!) We are happy to answer any further questions you may have by phone.

Year of construction: 2000, condition: defective spare-parts repository (used), Sell spare parts for a Trumpf TC 600L ram control new / used die acceptance punch holder drive motors this is only a small extract of what I have. Please just ask what you need. Dedsffyg Hspfx Ab Tjcr

Condition: good (used), Trumpf Vectormark Type: VMc2 Trumpf Vectormark laser marker with Fuchs extraction and filter devices Trumpf Vectormark GREEN 532nm Trumpf VMc2 Laser marker, with frequency-doubled diode-pumped Nd:Yag laser with Hurryscan 10 - Galvo head from Scanlab Fuchs extraction and filter devices TKFD The integrated pre-separator ensures the high filter capacity Different filter levels are possible and can be perfectly customized Ideal for confined spaces - can be placed under a table or integrated into machines Welding fume separation class W3, IFA certified Dsdpeciz Iysfx Ab Tscr TKFD can also be transported in the trunk without modification Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Trumpf Type: TruDisk 4002 / W20.HL29 Trumpf TruDisk 4002 laser beam source with KLH cooler Dcsdpfx Abjwh Rnze Tor The Trumpf TruDisk 4002 laser beam source is an industrial disk laser source (disk laser) from TRUMPF, characterized by high power, beam quality, and efficiency. It is frequently used for welding, cutting, and other material processing applications. Maintenance has been performed regularly. Unit consisting of a beam source with associated cooler, but without optics and fiber optic cable. Technical Specifications Laser power: 4,000 watts (4 kW) (minimum 80 W) Wavelength: ~1030 nm (infrared range) (Yb:YAG) Beam quality (BPP): typically ≤ 8 mm mrad Fiber connection: TruDisk lasers usually have multiple fiber connections Cooling: Water-cooled – via a KLH cooler Dimensions: 1.0 x 2.0 x H1.6 m (laser) + 1.0 x 1.5 x 1.8 m (cooler) 380 V -10% ... 460 V +10%, 3AC + PE 23 kW / 25 kV A - 34 A / 400 V 50 ... 60 Hz KLH cooler: The KLH cooler is an industrial liquid cooler that ensures heat dissipation from high-performance laser systems such as the TruDisk 4002. Typical Features: Water-to-water cooling Precise temperature control (typically 20–25°C) Refrigerant: R 404A Can be controlled via TRUMPF interface Required to comply with laser specifications Device Type W20.HL29 Weight: 850 kg (laser) + estimated 550 kg (cooler) Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions over the phone.

Condition: excellent (used), Trumpf Type: TruPulse 44 Trumpf laser device with laser light cable and KLH cooler Laser device TruPulse 44 Electrical power at nominal laser power on the workpiece 2.0 kW Power 2.0 kVA Current at 230 V 9.0 A Consumption data Dcsdpov Hnz Djfx Ab Tor Maximum power consumption (e.g. service case) Electrical power at nominal laser power on the workpiece 2.5 kW Power 2.5 kVA Current at 230 V 11.0 A Network design! Electrical connection values Mains 220 V (-10%) ... 240 V (+10%) 50 Hz (-3 Hz) ... 60 Hz (+3 Hz) at nominal power (total power factor) 0.88 Insulation resistance 400 kOhm Pre-fuse 16 A Laser device dimensions Width 485 mm Depth 800 mm Height 700 Laser device weight 1.5 kN (150 kg) distributed over 4 castors Cooler: KLH Kältetechnik UC3.K2W. MT-00-TLS Refrigerant R134 a / GWP 1430 Tank 1.80 kg Power supply 3 x 400 V Frequency 50 Hz Rated current 4.5 A Connected load 1.8 kW Dimensions Length 650 mm Depth 650 mm Height 1100 mm Weight 190 kg Weight: 340 kg Scope of delivery: (See picture) (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Trumpf TruDisk 4002 (6 C) High-Power Solid-State Disk Laser with up to 4 kW The Trumpf TruDisk 4002 (6 C) is a state-of-the-art, efficient, and robustly built disk laser optimized for demanding industrial metalworking applications. Machine type: TruDisk 4002 (6 C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: March 2016 Drawing number: 20-10-03-A204 No further testing was conducted in-house. Operating hours could not be read. The laser was operating flawlessly up until decommissioning. Features: - Top performance (up to 4 kW) - Excellent beam quality - Reliability & reflection safety - Energy-efficient, modular architecture - Ideal for a wide range of applications in the automotive industry, mechanical engineering, or surface processing Technical Highlights: - Power: From 80 W up to max. 4000 W in continuous operation (CW) - Wavelength: Approx. 1030 nm (Infrared, Yb:YAG) - Beam quality: Up to 2 mm·mrad (benchmark for exceptional quality), often with a range of 2–25 mm·mrad - Output options: Modular configuration – up to 4 outputs possible (depending on series) - Optional cooling: Water-cooled, e.g., via KLH chiller or integrated heat exchanger/compressor - Modular design: Robust optical layout, efficient operation, power factor correction, energy-saving modes, PROFIenergy interface Dedpfewzabqsx Ab Tjcr Typical Applications: - Laser welding (including hybrid or scanner-guided), e.g., for bodywork or gearboxes - Cutting / flame cutting of metals with high precision - Surface processing, coating applications, etc. – professional industrial use Supply voltage: 380 V (-10%) to 460 V (+10%), 3-phase AC + PE Frequency: 50 – 60 Hz Power consumption: 22 kW / 23 kVA Rated current: 325 A at 400 V Protection class: IP54 Short-circuit resistance: Icn / SCCR 50 kA Weight: 850 kg Condition: Used Scope of delivery: (See images) (Specifications subject to change and errors excepted!) Should you have any further questions, feel free to contact us by phone.

Condition: used, Trumpf TRUMPF TruDisk 4002 (4 C) High-Performance Solid-State Disk Laser with up to 4 kW Output Type: TruDisk 4002 (4 C) The TruDisk 4002 is a powerful, energy-efficient, and modular laser solution – ideal for industrial manufacturing environments with demanding requirements for quality, precision, and automation. The combination of high power, excellent beam quality, and smart factory features makes it particularly attractive for modern production lines. System type: TruDisk 4002 (4C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: May 2012 Dcjdpfx Aewzahdjb Ter Drawing number: 20-10-02-A3* No additional tests were carried out in-house. Operating hours could not be read out. The laser operated flawlessly until decommissioning. Technical features: Output & wavelength: 80–4000 W at 1030 nm Beam quality (BPP): typically 2 mm·mrad (up to 25 mm·mrad, depending on configuration) Modular & compact: footprint < 1 m², modular design simplifies maintenance/service Efficient energy & cooling systems: energy-saving modes, active power factor correction, pulse function to reduce consumption Flexible cooling: integrated heat exchanger (5–28 °C), optional with compressor (up to 38 °C inlet temperature) Reflection-resistant: special resonator design also suitable for highly reflective metals Industry 4.0 capable: extensive sensor technology and data interfaces for condition monitoring, OPC UA, predictive maintenance Application areas: Scanner & hybrid welding (e.g. automotive body manufacturing, shipbuilding) High-speed cutting, including on reflective metals Flame cutting & surface processing Laser cladding, hardening, deep penetration welding where high precision is required Technical data: Supply voltage: 380 V (-10%) to 460 V (+10%), 3AC + PE Frequency: 50 – 60 Hz Power consumption: 23 kW / 25 kVA Rated current: 34 A at 400 V Protection rating: IP 54 Short-circuit strength: Icn / SCCR 50 kA Weight: 850 kg Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted!) We would be happy to answer any further questions by phone.

Condition: used, Trumpf Trumpf TruDisk 4002 (6 C) High-Power Solid-State Disk Laser with up to 4 kW The Trumpf TruDisk 4002 (6 C) is a state-of-the-art, efficient, and robustly engineered disk laser optimized for demanding industrial metalworking applications. System type: TruDisk 4002 (6 C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: March 2016 Drawing number: 20-10-03-A204* No further in-house inspection was performed. Operating hours could not be read out. The laser was operating flawlessly until decommissioning. It offers: - Top performance (up to 4 kW) - Excellent beam quality - Reliability & reflection safety - Energy-efficient, modular architecture Ideal for diverse applications in the automotive industry, mechanical engineering, or surface processing. Technical Highlights: - Power: From 80 W up to max. 4000 W in continuous operation (CW) - Wavelength: Approx. 1030 nm (infrared, Yb:YAG) - Beam quality: Up to 2 mm·mrad (a benchmark for excellent quality), typically ranging from 2–25 mm·mrad - Output options: Modular configuration – up to 4 outputs possible (depending on model) - Optional cooling: Water-cooled, e.g. via KLH chiller or integrated heat exchanger/compressor - Modular design: Robust optical configuration, efficient operation, power factor correction, energy-saving modes, PROFIenergy connectivity Typical applications: - Laser welding (also hybrid or scanner-controlled), e.g. bodywork or gear assemblies - Cutting / flame cutting of metals with high precision - Surface processing, coating applications, etc. – for professional industrial use Djdpfx Ajwzaiueb Tscr Supply voltage: - 380 V (-10%) to 460 V (+10%), 3-phase + PE - Frequency: 50 – 60 Hz - Power consumption: 22 kW / 23 kVA - Rated current: 32.5 A at 400 V - Protection class: IP 54 - Short-circuit strength: Icn / SCCR 50 kA - Weight: 850 kg Condition: used Scope of supply: (see picture) (Subject to modifications and errors in technical data and specifications!) We are happy to answer further questions for you by phone.

Condition: excellent (used), Trumpf Type: TruMark 3000 Laser marking station Wavelength: 1064 nm Condition: used Dodpfx Asv Hfu Ueb Tscr Scope of delivery: (see picture) (Subject to changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: good (used), Trumpf HAAS Type: HAAS Laser HL556D Laser light wavelength: 1064nm Minimum power: 5 W Maximum power regulated: 550 W Beam parameter product: 25 mm-mrgd External dimensions: width 1250mm, height 1580, depth 720m Power cable with plug: Length: 5.5 m Plug: CEE round plug, 5-pin 63A-6h Cooling water hoses: Connections for supply and return: 1 inch The hoses are plugged onto the connections and sealed with 2 hose clamps each. Electrical interfaces: Serial interfaces for service purposes Ethernet interface for operating PC Interface of the analog input card ASV interfaces for safety circuits Output for measured values of the laser power Interface for connecting the control panel Emergency stop interface Electrical connection values: Mains Djdjc Tk Iyepfx Ab Tjcr 20-01-37-00 400 V ± 10%, 3P + PE, 50 Hz 20-01-38-00400 V ± 10%, 3P + PE, 60 Hz Scope of delivery: (laser system, laser head and replacement cable ...) (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.