Used Trumpf 200 R for sale (377)

Condition: ready for operation (used), Year of construction: 2006, operating hours: 30,904 h, laser power: 4,000,000 W, travel distance X-axis: 4,000 mm, number of axes: 3, This 3-axis TRUMPF Trumatic L 4030 was manufactured in 2006. It features a processing area of 4000 mm x 2000 mm and a powerful 4000 W laser. The machine requires a mains supply of 400 V and has a total connected load of 88 kVA. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF Trumatic L 4030 CO2 laser cutting machine we have for sale. Contact us for further details. • Processing area: 4000 x 2000 mm • Mains supply: 400 V / 50 Hz • Total connected load: 88 kVA • Control voltage: 24 V Cjdpjyu Nq Tefx Ailjgw • Required fuse protection: 3 × 160 A • Compressed air connection: 7–10 bar • Nitrogen connection (N₂): 30 bar • Oxygen connection (O₂): 20 bar • Operating Hours (NC): 84196 • Operating Hours (Resonator / HP Pump 1): 72564 • Operating Hours (Beam On / HP Pump 2): 30904 • Included Components: 2 Replacement Control Cabinets • Retrofits: Easy Filter Kit (installed 2023) • Measurements (Length x Width x Height): 11.500 x 6.000 x 2.000 mm • Total weight: with TLF laser: 16,000 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 70,119 h, machine/vehicle number: A0111A0021, controller model: TruControl 1000, laser source model: Festkörperlaser, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,270 mm, Equipment: CE marking, safety light barrier, TECHNICAL DETAILS Working area: 2,500 x 1,270 mm Parts flap: 300 x 500 mm Clamping claws: 2 units Laser Solid-state laser: TruDisk 3001 LLK outlets: 1 unit Fiber optic cable: 10 m Cutting head Lens focal length: 200 mm MACHINE DETAILS Operating hours Laser on-time: 70,119 h Total operating hours: 73,936 h Control Laser control: TruControl 1000 Screen size: 15" EQUIPMENT Robust, easily accessible C-frame Precision linear guide system for high-accuracy processing Linear magazine including 2 clamping claws Maintenance-free drives Repositioning device with programmable hold-down Brush tables Good parts container Cgedpfxoy R Uato Ailsw Chip bin Enclosed beam guidance via fiber optic cable ContourLine FocusLine NitroLine Chiller unit Diode-pumped excitation for long service life Upgradeable for up to 3 additional LLK outlets Quick-change cutting head system ControlLine Electro-hydraulic punching head Programmable hold-down plate Tool length compensation Punch lubrication spray Slug extraction system Open control based on Bosch PNC-P Control panel with TFT color display Teleservice via Internet Automatic shutdown USB port Network connection CE marking Multi-beam light barriers Laser source safety monitoring system Quick disconnect for hydraulics Scatter radiation protection Additional LLK outlet for operation with Trumpf system MultiTool function MultiBend function Thread forming function Marking / fast embossing function Roller and deburring technology function Softpunch function Adaptive stroke calibration Spray lubrication for die Additional clamping claw Individually opening clamping claws Height-adjustable clamping claws Automatic clamping claw closing Repositioning cylinder with height-adjustable pressure pieces Sensor for parts chute Loading/unloading aid for brush tables Vibration-damped foundation Chip conveyor with tilting bin Liftable brush segment Parts conveyor belt

Condition: excellent (used), Large flanging device Make Trumpf Type CS 20 CN 20 (28202) suitable for Trumpf CS 20 and CN20 very good condition, very little used Csdpsu Nuycjfx Ailjgw

Condition: excellent (used), Year of construction: 2000, Technical specifications: Codpewimvwefx Ailjgw Working length: 3050 mm Distance between columns: 2690 mm Press force: 130 t CNC control: DELEM DA65 2 D graphic Adjustable backgauge Controlled axes: Y1 / Y2; X; R; I CNC table bending compensation: Wila Moducrown Hydr. Tool clamping at the top and bottom Pneumatic tool shifting Number of bending aids: 2 Installation height: 535 mm Stroke: 220 mm Thrust: 410 mm Motor power: 12.5 kW CE mark Dimensions (length x width x height): approx. 3800 x 2350 x 3150 mm Weight: approx. 14 tons Accessories: 1 set of standard tools Condition: Good condition, tools in mint condition The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, operating hours: 33,749 h, machine/vehicle number: A1240A0497, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 10 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, workpiece weight (max.): 1,700 kg, TECHNICAL DETAILS Travel Range X-Axis: 4,000 mm Travel Range Y-Axis: 2,000 mm Travel Range Z-Axis: 115 mm Maximum Workpiece Weight: 1,700 kg Maximum Speed: 140 m/min Positioning Accuracy Positioning Deviation Pa: 0.1 mm Average Positioning Accuracy Ps: 0.03 mm Laser Data Maximum Laser Power: 4,000 W Wavelength: 10.6 µm Sheet Thickness Mild Steel: 25 mm Sheet Thickness Stainless Steel: 15 mm Sheet Thickness Aluminum: 10 mm MACHINE DETAILS Control: CNC Sinumerik 840D SL Total Power Consumption: 11–65 kW Beam-On Time: 19,152 h (as of 28.08.2025) Laser-On Time: 33,749 h (as of 28.08.2025) Dimensions & Weight Dimensions (L x W x H): 12,000 x 5,300 x 2,200 mm Machine Weight: 14,000 kg EQUIPMENT Automatic longitudinal pallet changer Longitudinal chip conveyor Oil vaporizer PierceLine FocusLine NitroLine Cgsdpey Rqngsfx Ailjw PlasmaLine TruFlow 4000 CO2 laser with optimized standby mode Maintenance-free radial turbine High frequency excitation TASC laser control Laser power control Laser logbook LensLine with status monitoring Cutting head with 250 mm focal length Quick-change cutting head device (UTI) ControlLine Lens with RFID chip ContourLine Micro-welding FastLine AdjustLine Internet remote services FlyLine Easy workshop programming

Condition: used, Year of construction: 2007, functionality: fully functional, Equipment: CE marking, documentation/manual, Trumpf TruBend 5170 with Bendmaster Csdpey Exm Tefx Ailegw The machine is available from May 6, 2025. The machine is in good, ready-to-use condition. 6 axes Backgauge with sensors CNC crowning CNC tool displacement Bendmaster (robot with 8m track) Load capacity 60 kg With vacuum suction device for sheets up to 40 kg CNC regrip station Double sheet detection BendGuard Lazersafe safety system Hydraulic tool clamping top and bottom Stroke: 500 mm Press force: 1700 kN Working length: 4250 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2001, laser power: 3,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 8 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, TECHNICAL DETAILS X-axis travel: 3,000 mm Y-axis travel: 1,500 mm Z-axis travel: 115 mm Working area: 3,000 × 1,500 mm Workpiece weight: 710 kg Drive and control system Drive: TLF 3000 Turbo Laser power: 3,000 W Cedpfxsy D H Ipo Ailogw Control unit: Siemens 840D Sheet thickness steel: 20 mm Sheet thickness stainless steel: 12 mm Sheet thickness aluminum: 8 mm MACHINE DETAILS Overall dimensions (L × W × H): 9,800 × 5,300 × 2,000 mm Machine weight: 11,500 kg

Condition: good (used), Year of construction: 2001, functionality: fully functional, Hydraulic press brake Make: TRUMPF Model: TrumaBend V85S Year of manufacture: 2001 Technical specifications Manufacturer: Trumpf Model: TrumaBend V85 S Year: 2001 Pressing force: 85 t Bending length: 2550 mm Throat depth: 420 mm Cgedpfx Aiey Dr Ibjlew Stroke: 215 mm Dimensions: L 3.1 x W 1.80 (plus 0.5 m support arms) x H 2.40 m Weight: 8.8 t Equipment - Controlled axes: Y1, Y2, X, R, Z1, Z2 - 2 movable support arms - CNC-controlled crowning - Hydraulic upper tool clamping system (Trumpf system) - Pneumatic die shifting - Delem 2D graphical control - Tool package: Upper tool, straight, H 140 mm, R 1 28°, L 2500 mm, segmented Lower tool V8/86°, H 100 mm, L = 2500 mm, segmented All specifications without guarantee. A demonstration is possible at any time in our showroom.

Condition: good (used), Year of construction: 2005, Used 2-meter CNC press brake from Trumpf Model: TrumaBend V85s Capacity: 2050 x 85 tons Control: Delem DA69 Cedpjy Dpufofx Ailjgw Axes: Y1, Y2, X, R, Z1 and Z2 Hydraulic WILA upper and lower clamping Year of manufacture: 2005

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, year of last overhaul: 2026, We are offering this very well-maintained TRUMPF TruLaser Weld 1000 laser welding machine, year of manufacture 2023, with low operating hours. The machine has been serviced annually by TRUMPF, with the most recent service carried out in April 2026. The machine is powered on and fully equipped with two rotary axes. Programming is performed directly on the machine, without additional software required. The machine is still in production. Available for delivery in August 2026. Manufacturer: TRUMPF Model: TruLaser Weld 1000 Year of manufacture: 2023 Cgodpfx Aioy I Ak Ujlsw If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: used, Year of construction: 1994, machine/vehicle number: 884019, functionality: fully functional, power: 15 kW (20.39 HP), total length: 3,600 mm, total width: 2,300 mm, total height: 2,800 mm, overall weight: 8,800 kg, TRUMPF Trumabend 125/3 Year of manufacture: 1994 Control: CNC (DA58) Country of origin: Austria Press force 125 t Bending length 3050 mm Frame gap 2550 mm Cgjdpfx Aioy Iydlelow Total power requirement 15 kW Throat depth 350 mm Approach speed 130 mm/sec Working speed 1–10 m/min Return speed 100 mm/sec Backgauge – adjustable 1000 mm Stroke 200 mm Installation height 400 mm Press capacity 280 bar Space requirement approx. 3.6 x 2.3 x 2.8 m Machine weight approx. 8.8 t Control CNC Control system DA58

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, laser type: fiber laser, Used laser cutting system with 8 kW fiber laser and LiftMaster Compact (Stopa version) Manufacturer: TRUMPF Model: TruLaser 5040 fiber (L69) Year of manufacture: 2015 Operating hours approx.: 67,000 h, Laser on: 40,100 h TECHNICAL DATA: Maximum material thickness: Mild steel O2: 25 mm, Stainless steel N2: 40 mm, Aluminum N2: 25 mm, Copper O2: 10 mm, Copper N2: 5 mm, Brass N2: 10 mm Position deviation: 0.05 mm Max. position scatter Ps max: 0.03 mm Working area: 4,000 x 2,000 mm Laser power: 8,000 watts STANDARD EQUIPMENT Machine: Closed machine frame Torque drive combined with linear direct drives Enclosed beam guidance via fiber optic cable (LLK) Cooling unit Machine cooling unit (water-air) Integrated control cabinets with interior lighting Integrated storage cabinet Automatic longitudinal pallet changer 19" touch color screen Longitudinal conveyor belt TruDisk power supply via the machine Work area illumination Positioning laser diode Spray unit PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Copper cutting package (includes cutting data) Brass cutting package (includes cutting data) Transport and assembly device SPECIAL EQUIPMENT: Solid-state laser TruDisk 8001 with 1 fiber output Smart Nozzle Automation (includes nozzle changer, automatic nozzle condition monitoring, and smart skip) BrightLine fiber CoolLine (only with BrightLine fiber) DetectLine: precise sheet position detection (incl. automatic focus measurement) Wide transverse conveyor with tipping container (container to the right of the machine) Cleaning brush Integrated camera (Full HD) for process monitoring and single frame transmission to the network (view of the first 2.5 m) Cgedpfx Asy A I Tqjilsw Additional 10 m extension of fiber optic cable between laser and machine Smart Collision Prevention (requires smart-collision-prevention plug-in for TruTops) Machine podium version (without steel structure) Storage interface for STOPA large-scale storage systems (SKL or UL) Safety devices for storage integration incl. 2nd light barrier circuit Storage interface (without storage cart) LiftMaster Compact (STOPA version) TRUMPF Laser: Solid-state laser TruDisk 8001 with one fiber output Fiber optic cable as per standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control (The TruDisk laser is subject to international export controls. According to EC Dual-Use Regulation 428/2009 (laser covered under 6A005)) Cutting head: Universal cutting unit with fully adaptive lens system Piercing head strategy Protective glass to prevent lens contamination Protective glass condition check ControlLine: height control and sheet outer edge detection Control system: SINUMERIK 840D SL control Simple workshop programming TruTops Laser via network access Quick re-production Integrated TRUMPF technology data Automatic shut-off Programmable cutting gas/pressure selection ContourLine FastLine FlyLine Microweld AdjustLine Teleservice via Internet Data transfer: USB interface RJ-45 network connection Safety: CE marking Light barriers Multi-chamber exhaust system Compact extraction unit Machine enclosure, certified viewing window, door on right Electric roll-up roof This used machine can be inspected under production conditions. All details without guarantee – sale is without any form of warranty or guarantee. Subject to prior sale.

Condition: ready for operation (used), Year of construction: 1991, punching force: 15 t, overall weight: 4,300 kg, product length (max.): 3,800 mm, CNC punching machine manufactured in 1991. This TRUMPF TRUMATIC 120R features a punching force of 15 tons and a maximum punching diameter of 38 mm. It offers a working area of 1000 x 2000 mm with repositioning and includes a complete set of tools. If you are looking to get high-quality punching capabilities, consider the TRUMPF TRUMATIC 120R machine we have for sale. Contact us for further details regarding this machine. • Maximum sheet thickness: 4 mm • Maximum punching diameter: 38 mm • Working area without repositioning: 1000 x 1000 mm Cjdpfx Aieymz Rcolegw • Working area with one repositioning: 1000 x 2000 mm • X/Y axis speed: not specified • Rotation speed: 360 degrees per second (full rotation) • Maximum stroke rate: 340 strokes per minute • Control system: TRUMAGRAPH CC 200 • Automatic tool change: 9 tool stations • Power requirement: 15 kVA / 50 Hz • Documentation: Complete documentation included, together with machine history Additional equipment • Large set of tools • Two additional tables to extend the working area

Condition: ready for operation (used), Year of construction: 2001, laser power: 2,400 W, travel distance X-axis: 3,085 mm, number of axes: 2, CO2 laser cutting machine manufactured in 2001. This TRUMPF TRUMATIC TC 600L Y1300 features a punching force of 22 T and a maximum thickness of 8 mm. It offers a maximum format of 3085 x 1370 mm in punching operation and a feed rate of 90 m/min on the X axis. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TRUMATIC TC 600L Y1300 machine we have for sale. Contact us for further details. Codsy Anhujpfx Ailogw • Condition: Good overall condition; fully functional; still in production • Maximum format (combined operation): 2585 x 1280 mm • Maximum format (LASER operation): 3085 x 1280 mm • Maximum format (punching operation): 3085 x 1370 mm • Power-on hours: 48,746 h • Laser beam operating hours: 2,159 h • Punching force: 22 T • Maximum thickness: 8 mm • Laser source: TLF 2400W turbo • Feed rate X axis: 90 m/min • Feed rate Y axis: 60 m/min

Condition: used, functionality: fully functional, Year of construction: 2008, Cooling unit Riedel / Trumpf L15/21-TR4-K03.24 Cgsdpfx Aistqmigolow

Condition: like new (used), Good parts conveyor belts for TruMatic 7000 / 6000 Cgodpfx Aju S Ny Tjiljw Very good condition

Condition: good (used), functionality: fully functional, Year of construction: 2013, Good used laser cutting machine TruLaser L 3030, still operational, available for sale. Inspection possible by appointment. Operating hours are visible in the photo. Cjdpjy H Aa Tsfx Ailegw

Condition: ready for operation (used), Year of construction: 2001, operating hours: 65,000 h, laser power: 3,200 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, number of axes: 3, CO2 laser cutting machine manufactured in 2001. This TRUMPF Trumatic L3030 features a laser power of up to 3208 W in CW mode, providing efficient cutting capabilities. It operates on a 3-phase AC supply. If you are looking to get high-quality cutting capabilities, consider the TRUMPF Trumatic L3030 machine we have for sale. Contact us for further details. • Electrical • Supply voltage: 400 V • Phases: 3-phase AC • Frequency: 50 Hz • Rated power: 73 kVA Cgjdoyzymgspfx Ailow • Rated current: 105 A • Maximum fuse protection: 125 A • Control voltage: 24 V DC • Control • Control system: Siemens Sinumerik 840D (CNC) with TRUMPF TASC3 laser control • Control software version: 2.4 • Laser performance • CW mode power: • 100%: 3208 W • 85%: 2756 W • 75%: 2407 W • Pulsed (5 kHz) power: • 100%: 3208 W • 75%: 2416 W • 50%: 1610 W • 25%: 810 W • 10%: 328 W • 5%: 157 W • 1%: 0 W • RF/drive • Reflected RF power: 0.3 kW • Maximum CW RF amplitude: 100% • Switching frequency (CW): 50 kHz • Maximum pulse voltage: 10,000 V • Pressure and leakage • Operating pressure limits: 20.01–27.00 kPa • Maximum turbine pressure: 200 hPa • Leakage rate: 0.04 hPa/min • Thermal/CPU • Maximum CPU temperature: 49 °C • Actual CPU temperature: 43 °C • Optics/Alignment • Maximum beam alignment time: 600 s • Hours • Laser on hours: 65,000 h Additional equipment • RIEDEL chiller (cooling system) (2001), Type: L 15/21 TR3 • Supply voltage: 400 V • Phases: 3-phase • Frequency: 50 Hz • Nominal current: 42 A • Protection class: IP54 • Refrigerant: R134a • Refrigerant charge: 11.5 kg • Maximum water pressure: 20.2 bar

Condition: ready for operation (used), Year of construction: 2012, operating hours: 20,118 h, laser power: 6,000,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, number of axes: 3, This 3-axis TRUMPF TruLaser 5030 was manufactured in 2012. It features a powerful 6,000 W laser and is equipped with a HANDTE MF-L 2000 extraction system. The machine has been completely freshly serviced and has a total of 20,118 laser hours. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 5030 CO2 laser cutting machine we have for sale. Contact us for further details. • Gesamtantriebsleistung: ca. 11,5 kW (nur Maschine ohne Zusatzausstattung) • Elektrische Ausführung: nach VDE-Richtlinien, Spannung 400 V ± 10 %, 50 Hz mit Nullleiter • Connected load: 400 V / 50 Hz / 12 kVA • Main fuse: 3x160 A • Fehlerstromschutzschalter in der Netzeinspeisung nur als allstromsensitive Ausführung mit 300 mA zulässig • Steuer- und Ventilspannung 24 V-DC • Multitasking Prozesssteuerung mit großem Bedienterminal und übersichtlicher Menüführung • Schaltschrank und Bedienpult frei aufgestellt • Lackierung Grundmaschine: lichtgrau - RAL 7035 • Lackierung Abdeckungen: rotviolett - RAL 4002 • Minimale Abschnittlänge: im automatischen Betrieb ab 10 mm • Mindest-Reststücklängen: ca. 180 mm • Verfahrweg des Nachschubgreifers: 3.000 mm • Gewicht des Schneidgutes: bis max. 4.000 kg • Länge der Maschine: 5.600 mm • Breite der Maschine: 4.300 mm • Höhe der Maschine: 2.550 mm (2.150 mm für Transport), Anlage zum Transport geteilt • Gewicht: ca. 3.100 kg • Materialauflagehöhe: 800 mm • Sägebandspannung: hydraulisch, elektrisch überwacht • Kühlmittelbehälter Fassungsvermögen: ca. 60 l • Kühlmittelpumpe Fördermenge: 40 l/min bei 2,5 m Förderhöhe, Leistung: 115 W • 3RD CNC 6006, Motor 13,1 kW, Spindeldrehzahl 50-5000 U/Min. • Tisch 6100x580 mm, ausgeführt mit Späneförderer • Verfahrwege X/Y/Z 6100x600x450 mm • Pendelbetrieb (Be- und Entladen während Maschine produziert) • Standardausführung inklusive: 15,4” Touchscreen PC und Pentium 5 PC, 8GB RAM, 120GB Festplatte • Grafische Programmierung • Automatische Werkzeuglängenvermessung • Bedienpult extern auf Linearführung • Verkleidung um Maschinenkopf • Laser-Gebietssensor (Pendelbetrieb) • Kühlanlage mit Emulsion • Ethernet-Anschluss für Teleservice • Gemäß Angebot vom 26. Januar 2022 • Inklusive: Tisch 70 mm abgesenkt und Säule 100 mm verlängert, Abstand Spindel-Tisch 295-745 mm Cgodpfx Aijyrfbceljw • 16-fach Werkzeugwechsler • Elektronisches Handrad für manuelles Verfahren der Achsen • Kühlung durch die Spindel, Arbeitsdruck 4 Bar, ausgeführt mit Drehzufuhrventil geeignet für Kühlung mit nur Luft • Automatisches Tastsystem für die Höhe des Werkstücks (Z-Reader) • Komplette DrillCam CAD/CAM Software zum Konvertieren von 2D DXF, DWG, DSTV, NC, NC1 oder 3D STEP Dateien zu Maschinenprogrammen, auf der Steuerung der Maschine installiert • Safety: Light barrier system • Laser hours: 20,118 h • Condition/Service: Completely freshly serviced • Enclosed machine frame with integrated laser unit • Gantry drive combined with linear drives • Automatic pallet changer • Longitudinal conveyor belt • Cross conveyor (waste conveyor) • Work area lighting • PCS (Process Control System) • Positioning laser diode • Oil spray system • HI-LAS • HI-LAS PLUS • PMS (Plasma Monitoring System) • Trumpf Laser: CO2 laser TFL 6000 • Cooling unit • High-frequency excitation • Laser power control • Programmable cutting gas pressure setting • DIAS III • AutoLas Plus • Oil spray system for safe thick sheet metal processing • Automatic shut-off • Programmable power cycles • Laser logbook function

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 64,000 h, machine/vehicle number: S1631C0027, laser hours: 40,000 h, laser power: 3,000 W, Equipment: cooling unit, documentation/manual, safety light barrier, For Sale – TRUMPF TruLaser Cell 8030 (2015) | 3D Laser Cutting System A rare opportunity to acquire a premium 3D laser cutting system from TRUMPF, fully maintained and production-ready. Ideal for automotive, aerospace, and general metalworking applications requiring precision 3D contour cutting on tubes, hydroformed parts, and complex profiles. Machine at a glance Model: TRUMPF TruLaser Cell 8030 Year of manufacture: 2015 Laser source: 3,000 W TRUMPF (CO₂ / solid-state – to be confirmed on inspection) Operating hours: 70,000 h total / 41,125 h beam-on Condition: Fully operational, currently in series production Cgsdpfx Aieukhltolew Service history: Annual maintenance exclusively by TRUMPF – complete documentation available Why this machine 5-axis CNC kinematics for demanding 3D geometries Enclosed, automation-ready workspace Proven performance in both high-mix/low-volume and medium series production Original TRUMPF engineering – Made in Germany Uninterrupted OEM service record – no third-party interventions Our difference: modular handover, not just a machine sale We are not a trading company. We are an active laser job shop operator (SOERMEL Groupe, France – 65 staff, 12 M€ revenue, IATF 16949 / EN 9100 / ISO 9001 certified). Buyers benefit from our operational know-how through four service packages – choose what fits your project: ModuleScope M1 – Ex WorksPick-up at our site, loaded onto your truck. Machine tested before handover.Buyers with own rigging and installation capacity. M2 – DeliveredM1 + international transport, insurance, and unloading at your facility (DAP/DDP on request).Buyers with internal installation team. M3 – Delivered & InstalledM2 + mechanical installation, utility connection, first power-up, laser alignment.Buyers without dedicated installation resources. M4 – TurnkeyM3 + commissioning, process validation with your parts, operator and maintenance training, acceptance protocol.Buyers who want the machine producing from day one. On-site inspection and sample cuts on your own parts available at our facility in France prior to purchase.

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 70,000 h, machine/vehicle number: S1631C0047, laser hours: 38,125 h, laser power: 3,000 W, Equipment: CE marking, cooling unit, documentation/manual, emergency stop, fume extraction, safety light barrier, For Sale – TRUMPF TruLaser Cell 8030 (2015) | 3D Laser Cutting System A rare opportunity to acquire a premium 3D laser cutting system from TRUMPF, fully maintained and ready for production. Ideal for automotive, aerospace, and general metalworking applications requiring precise 3D contour cutting on tubes, hydroformed parts, and complex profiles. Cgodpoy E Iv Refx Ailsw Machine at a glance Model: TRUMPF TruLaser Cell 8030 Year of manufacture: 2015 Laser source: 3,000 W TRUMPF (CO₂ / solid-state – to be confirmed upon inspection) Operating hours: 70,000 hours total / 41,125 hours beam-on Condition: Fully operational, currently in series production Service history: Annual maintenance exclusively performed by TRUMPF – complete documentation available Why this machine 5-axis CNC kinematics for demanding 3D geometries Enclosed, automation-ready workspace Proven performance in both high-mix/low-volume and medium series production Original TRUMPF engineering – Made in Germany Uninterrupted OEM service record – no third-party interventions Our difference: modular handover, not just a machine sale We are not a trading company. We are an active laser job shop operator (SOERMEL Groupe, France – 65 employees, 12 million euros in revenue, IATF 16949 / EN 9100 / ISO 9001 certified). Buyers benefit from our operational know-how through four service packages – choose the one that fits your project: Module Scope M1 – Ex Works: Pick-up at our site, loaded onto your truck. Machine tested before handover. For buyers with their own rigging and installation capabilities. M2 – Delivered: M1 + international transport, insurance, and unloading at your facility (DAP/DDP on request). For buyers with an internal installation team. M3 – Delivered & Installed: M2 + mechanical installation, utility connection, first power-up, laser alignment. For buyers without dedicated installation resources. M4 – Turnkey: M3 + commissioning, process validation with your parts, operator and maintenance training, acceptance protocol. For buyers who want the machine producing from day one. On-site inspection and sample cuts on your own parts are available at our facility in France prior to purchase.

Condition: used, Year of construction: 2018, controller model: , _____ Description: Year of manuf. : 2018 Control : Technical data Year of manufacture:2018 Pressing force approx.:3200 kN Folding length approx.:4420 mm Control system:TASC 6000 Projection:420 mm Free upright clearance approx.:3680 mm Usable installation height approx.:615 mm Machine weight approx.:23400 kg Codpfjyy Hgqex Ailsgw Equipment :- Sturdy machine frame :- Press beam, stress relieved with high bending strength :- Spherical bearing of the press beam (inclined position) :- Electro-hydraulic top drive with 4-cylinder technology :- Optical set-up and positioning aid :- Generous edge clearance :- Flat front covers :- Block hydraulics :- Electronic pressure compensator :- Measuring system with glass scale and deflection compensation :- Hydraulic oil in the machine (lifetime lubrication) :- Oil cooler :- Control cabinet cooling via air-to-air heat exchanger :- Modern machine design Extended equipment :- 6-axis backgauge system :- Hydraulic upper tool clamping :- CNC crowning :- Work area lighting front and rear BendMaster (150) :- Sturdy base body and manipulator in cast aluminium construction :- Load capacity 150 kg, plate plus gripper :- Low floor track in welded construction :- Sheet sensor for contour detection :- Rotary feed-through for easy gripper change :- Gripper coupling on BendMaster :- Sensors for 4-axis backgauge system :- Electric drives :- Double sheet detection :- Regripping station NC :- Vacuum generation for suction gripper :- Platform (300 mm) for the bending press Extended BendMaster equipment :Extended BendMaster equipment - Track extension to 12 m :- Sensor system for 6-axis back gauge :- Gripper changing console :- Vacuum gripper, undefined :- Modular vacuum gripper with separation (material for 3 grippers) :- Gripper coupling :- Tong gripper :- Sheet removal station with linear axis :- Side door on right for safety fence

Condition: used, functionality: fully functional, 1. BALL RECIRCULATING UNIT KUVE20-B-1947 PART NO.: 386954 1 PC. Machine: T3030 L20 COUNTRY OF ORIGIN: FR 2. WATER MANIFOLD COMPLETE PART NO.: 1996899 1 SET Machine: T3030 L20 3. WELDING HEAD WS OPTICS 1 SET Machine: T3030 L20 4. CUTTING HEAD LENS 250 D40 – 17616 PART NO.: 1497234 1 PC. Machine: T3030 L20 COUNTRY OF ORIGIN: DE 5. (R)GRID VOLTAGE UNIT PART NO.: 0983675 1 PC. Machine: T3030 L20 6. BELLOWS Y-AXIS 93614-102-40 PART NO.: 0141394 1 PC. Machine: T3030 L20 7. EXPANSION VALVE TGEN 25TR MOP70 R134a PART NO.: 1627195 1 PC. Machine: 3030 6kW 8. BELLOWS X-AXIS 1854032 PART NO.: 606083 1 PC. Machine: T3030 L20 COUNTRY OF ORIGIN: IT 9. TRIODE UP TO 4KW RS3021CJ PART NO.: 903994 1 PC. Machine: T3030 BRAND: THALES 10. FILTERS 8 PCS. Machine: T3030 Csdpfxjx Uzblo Ailsgw 11. BELLOWS Y-AXIS PART NO.: 1226193 1 PC. Machine: T3030 5kW 12. DISK BELLOWS Y-AXIS PART NO.: 1353514 1 PC. Machine: T3030 5kW 13. BOX BELLOWS PART NO.: 0978079 1 PC. Machine: T3030 5kW

Condition: ready for operation (used), Year of construction: 1998, pressure 85.0 t chamfer lenght 2050 mm distance between columns 1750 mm column arm 410 mm stroke 365 mm dayligth 535 mm ajustment speed 200 mm/sec working feed 1.0 - 10.0 mm/sec return speed 135 mm/sec back stop - adjustable max. 600 mm table width 120 mm Cgodpoxaa Urjfx Ailow work height max. 1050 mm Number of working hours 28.500 h oil volume 200 l operating pressure 340 bar total power requirement 14.0 kVA weight of the machine ca. 9050 kg range L-W-H 2680 x 2100 x 2885 mm with increased installation height / piston stroke very well maintained condition (!!) with only approx. 28.500 operating hours - in checked condition - machine video - ?v=ZuwyPKJSYLw Equipment: - CNC electro-hydraulic press brake - including DELEM CNC control * swiveling control panel at the front left - CNC controlled axes: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning - CNC electro-motorized back stop (X axis) - CNC electro-motorized height adjustment of the back stop (R axis) - CNC electro-motorized adjustment of the stop fingers (Z axes) - CNC pneumatic die displacement (I axis) - CNC motorized table crowning - WILA electro-hydraulic upper tool clamping - WILA electro-hydraulic Lower tool clamp - 1x freely movable 2-hand / foot control - 2x front, stable support arms including "sliding system" - side protective device (swinging doors) - rear protective device (swinging doors) - bending tool storage cabinet (right front, side) - original operating instructions + circuit diagram etc. further technical data: - feed speed X axis .. 500 mm/sec. - feed speed R axis .. 300 mm/sec. - feed speed Z axis .. 1000 mm/sec. - travel range X axis .. max. 600 mm - travel range R axis .. max. 250 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 24,314 h, machine/vehicle number: A0230A1231, laser power: 6,000 W, sheet thickness (max.): 25 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 100 mm, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the machine by 30.04.2026! Due to increased selling pressure, the auction period has been shortened and the reserve price reduced! TECHNICAL DETAILS Travel range X-axis: 3,000 mm Travel range Y-axis: 1,500 mm Travel range Z-axis: 100 mm Laser power: 6,000 W Laser unit: CO2 laser TLF 5000, high-frequency excited Max. workpiece weight: 900 kg Positioning speed (X/Y): 200 m/min Positioning speed simultaneous (X+Y): 300 m/min Max. sheet thickness steel: 25 mm Max. sheet thickness stainless steel: 25 mm Sheet thickness aluminum: 15 mm MACHINE DETAILS Power-on hours: 55,176 h Cutting hours: 24,314 h Control model: Siemens Sinumerik 840D Control features: - Open PC-based control system - Online support - Diagnostic functions - Maintenance logbook - Technology data - Remote maintenance Cgedpfsyynu Nex Ailjw Safety equipment: - Multi-beam light barriers and guard enclosure - Fully enclosed beam path with nitrogen ventilation - Monitoring system - Multi-chamber extraction and compact dust collector Paint finish: white RAL 9002 / gentian blue RAL 5010 Drives: Gantry drive combined with linear direct drives ADDITIONAL EQUIPMENT - Cooling unit - Logbook function - Automatic pallet changer - Laser power control - HI-LAS high-pressure cutting - PMS plasma sensing - Programmable power cycles - Programmable cutting gas pressure regulation - Laser cutting head with 5" lens and 7.5" lens - Quick-change system for cutting heads - Automatic sheet edge detection - APC capacitive height control and process monitoring - PCS (Process Control System) - Laser diode positioning - Automatic focus adjustment (AutoLas Plus) - Spraying device for safe thick sheet processing - Automatic shutdown - Work area lighting - Fully enclosed machine frame with integrated laser unit