Used Traveling Column Machining Center for sale (70,275)

Condition: repair required (used), Year of construction: 2014, functionality: limited functionality, Initial commissioning: 2014 Control: Fidia C40 Vision Working Areas X-axis approx. 850 mm Y-axis approx. 950 mm Z-axis approx. 600 mm Rotary Swivel Table RT A-axis ±125° C-axis 360° continuous Clamping Table Diameter: 800 mm T-slots: 4+1 (H7)x18mm T-slot spacing: 160 mm Max. table load: 1,200 kg Max. turning diameter: 1,000 mm Milling Head Spindle power: 30 kW Max. spindle speed: 24,000 rpm Torque: 105 Nm Tool interface: HSK 63A Tool clamping: hydraulic Linear Axis Drives Feed rate X, Y, Z axes: approx. 45 m/min Dimensions, Weights Machine footprint without control cabinet: approx. 4,000 x 4,700 mm Required height: approx. 3,700 mm Total weight: approx. 17,000 kg Additional Equipment - 42-position tool changer - Wet machining with belt filter system Fodpfx Adoytfy Iepsfw - Chip conveyor Machine Condition The table has been completely overhauled, but there are still issues with the Fidia control system. An additional investment of around €25,000 is required for new Fidia control cards.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: A.100765.01, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,200 mm, controller model: SIEMENS SINUMERIK 840 D, spindle speed (max.): 6,000 rpm, The machine spindle was overhauled in 2015! TECHNICAL DETAILS Travel X-axis: 1200 mm Travel Y-axis: 1000 mm Travel Z-axis: 1200 mm Spindle speed: 25 - 6,000 rpm Max. torque: 900 / 1130 Nm Number of tables: 2 Maximum interference diameter: 1200 mm Table rotation speed: 15 rpm Table clamping torque: 10,000 Nm Tilting moment: 29,000 Nm Distance between spindle nose and table: 130 mm Pallet dimensions: 800 x 630 mm Pallet change time: 16 s Transport weight: 1,200 kg Number of tool stations: 250 Maximum tool diameter: 125 mm Diameter with adjacent stations free: 250 mm Maximum tool length: 650 mm Maximum tool weight: 40 kg Tool change time: 2.5 - 4.5 s Average chip-to-chip time: 7 - 9 s Tool holder: SK 50 DIN69871 Feed rate: 1 - 36,000 mm/min Rapid traverse: 36 m/min MACHINE DETAILS Control: SIEMENS SINUMERIK 840 D Dimensions & Weight Dimensions (L x W x H): 10,000 x 6,000 x 3,800 mm Machine weight: approx. 30,000 kg Operating hours: approx. 100,000 h (The machine was operated in 2-shift + ghost shift mode. The previous owner estimates approximately 100,000 hours over 20 years of operation.) EQUIPMENT Direct measurement via glass scales Coolant system 1,250 L High-pressure pump 11 bar (coolant) Through-spindle coolant 25/50 bar (TSC) Blow-out device for spindle taper Paper filter system Chip conveyor Pallet changer 2 pallets Set of tool holders Coolant/mist extraction Fsdpfx Ajytfmzjdpofw Touch probe

Condition: used, Year of construction: 2014, total height: 2,800 mm, total length: 10,300 mm, total width: 2,450 mm, Empty weight: 6.600 kg Price: On request - Details: - └ Description: Machine currently not working: Problem in the canbus system - Year: 2014 Ffsdpfx Adjytcl Ispsw - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AA2/002546 - Number of milling spindles [pcs.]: 1 - Type milling table: Beam table - Tool clamping system: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: Yes - Tool changer positions [pcs.]: 24 - System/software: Xilog plus - Safety feature: Safety light curtain, Door interlock switches, Enclosed fence - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: Vtlf 250 - └ Year of manufacture: 2008 - └ Main motor power [kW]: 5.5 - └ Connection diameter [mm]: 70 - └ Oil free: Yes - Tools included: Yes - CNC options: Offcut conveyor, Manual control - CNC documentation available: USB stick - Table length [mm]: 5200 - Table width [mm]: 1300 - Voltage [V]: 400 - Current consumption [A]: 64 - Transport dimensions: 10300mm x 2450mm x 2800mm (l x w x h) - Transport weight [kg]: 6600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2010, Technical details: x-travel: 800 mm y-travel: 685 mm z-travel: 630 mm c-axis: 360° (Planscheibe-Tisch) control: Siemens 840D Power Line spindle speed:: 10.500 - 20.000 U/min max. torque on the spindle: 180 Nm tool taper: HSK -A63 DIN 69893 tool changer with: 40 places no. of tables: 2 table swivelabel +/-: je 120 (a-Achse) ° table surface area: 280 x 275 mm table load capacity: 320 kg interface: RS232 spindle hours: 38.700 h Total power requirement: 37 kW dimension machine xH: 4,0 x 4,4 x 3,0 m dimensions LxWxH: Späneförderer: 2,1 x 1,05 x 1,5 m dimensions L x W x H: Kühlschmieranlage: 1,3 x 1.6 x 1,95 m Fodpsytcf Usfx Adpofw 5 - axis machining center CNC machining center Clamping table for 4th and 5th axis (swivel 120° right/left/speed 50 rpm and turn with faceplate Ø 280mm/200 rpm) max. workpiece size 940 x 650mm for/on table with chip conveyor make Knoll, 750 K-1/150; year of manufacture 2009 Bürener coolant system with paper belt filter belt width 700mm; year of manufacture 2009 for both control cabinets with cooler Rittal Accessories exclusive i.D. *

Condition: good (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 630 mm, For sale 1 machining center Hartford LG 800S Year 2007 3 axes Fanuc A1100 Machining Capacities Axis travels X/Y/Z: 800 mm (X-axis) x 510 mm (Y-axis) x 630 mm (Z-axis) Table dimensions: 950 mm x 510 mm Maximum workpiece weight: 500 kg Spindle speed: Typically 8,000 rpm, optionally 10,000 rpm Spindle taper: BT40 (or ISO 40) Tool magazine (ATC): 24-position automatic tool changer Machine weight: Approx. 5,800 kg BT MACHINES PURCHASE AND SALE Ffsdpfxoxvz Tno Adpsw ALL TYPES OF INDUSTRIAL EQUIPMENT ALL TYPES OF MACHINE TOOLS

Condition: ready for operation (used), controller manufacturer: Heidenhain, Type: ML120-12000 6 assen gelijktijdig (X / Y / Z / W / B / V) + 2-assige indexeerfreeskop (2,5°) 8 assen gelijktijdig (X / Y / Z / W / B / V) + continue orthogonale freeskop (A: +-120° / C: +-180°) Zware CNC-frees- en boormachine / CNC-vloerboor- en freesmachine ramgrootte: 630 x 500 mm - ramslag: 1250 mm spindeldiameter 130 mm - slag: 650 mm - zonder freeskop te gebruiken als boor CNC continue orthogonale freeskop (A: +-120° / C: +-180°) CNC indexeerfreeskop (2,5°) gereedschapswisselaar voor het automatisch wisselen van twee freeskoppen koeling door spindel gereedschapswisselaar met 60 posities spaantransportband Siemens aandrijvingen en motoren Heidenhain regel- en meetlinialen gewicht van de machine: 60 ton afmetingen van de machine: 19 meter x 12 meter x 6,65 meter TIRT3025 CNC draaitafel continu: - max. 60 ton werkstukgewicht - hydrostatische tafel - afmetingen: 3000 x 2500 mm - slag of draaitafel: 2500 mm - max 2 toeren per minuut - gewicht van de tafel: 37 ton - afmetingen: 6500 x 2500 x 1500 mm 3 T-sleuftafels Fodpfx Aeyr Tgaodpjfw - 7600 x 2800 mm - 7600 x 2480 mm - 4300 x 1800 mm - gewicht van de tafels: 50 ton Fresatrice a montante mobile - Freesmachine met mobiele kolom - Fraiseuse-aleseuse avec montant mobile - Fräs-Bohrmaschine mit beweglichem Ständer Longitudinal travel X-axe: 12 000 mm Crosstravel Y -axe: 1250 mm (ram-travel) Travel Z-axe (Height): 3500 mm Power on spindle: 37 kW Admission in millingheadspindle (ISO): ISO 50 Max quill travel Z': 1250 + 650 mm Max speedrange: 6 > 2000 rpm

Condition: used, Year of construction: 2000, Deckel Maho DMU 50 eVolution 5-Axis Universal Milling Machine Condition: Used Year of manufacture: 2000 Technical Data Travel: X/Y/Z 500 mm / 420 mm / 380 mm Main spindle: Speed up to 18,000 rpm Power (40% duty cycle) approx. 15 kW to 35 kW (depending on spindle version) Tool holder: HSK-E 50 Fedpfx Adsyr Safjpjfw NC swiveling rotary table: Clamping surface Ø 500 x 380 mm Swivel range (B axis) 0° to 180° Rotary range (C axis) 360° Max. table load: 200 kg Tool changer: 60 stations Feed rate: up to 20,000 mm/min Rapid traverse (X/Y/Z): up to 50 m/min Equipment Control: Heidenhain Measuring systems: Direct position measuring systems in all axes Accessories: Chip conveyor, internal coolant supply Weight: approx. 5,500 kg to 6,000 kg Installation area with peripherals: approx. 5.4 x 4.7 m

Condition: used, Year of construction: 2014, total height: 2,800 mm, total length: 6,900 mm, total width: 2,800 mm, Empty weight: 6.100 kg Price: On request - Details: - └ Description: Needs repair to B-axis and leaks to seals - Year: 2014 - Documentation available: No - CE certificate present: No - Serial number: 10333 - Number of milling spindles [pcs.]: 2 Ffedeyr Rnuopfx Adpjw - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - └ Milling spindle 2: - - Number of controlled axes [pcs.]: 3 - Type milling table: Beam table - Tool clamping system: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: Yes - Tool changer positions [pcs.]: 45 - Safety feature: Safety mat, Enclosed fence, Door interlock switches - Vacuum pump present: Yes - └ Number [pcs.]: 2 - └ Brand: Becker - └ Type: Vtlf 2.250 - └ Year of manufacture: 2011 - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 244 - └ Connection diameter [mm]: 60 - └ Vacuum pressure [bar]: 200 - └ Oil free: Yes - Tools included: Yes - CNC documentation available: User keys/licenses, USB stick - Table length [mm]: 4800 - Table width [mm]: 1500 - Voltage [V]: 400 - Current consumption [A]: 39 - Fuse [A]: 63 - Power [kW]: 22.8 - Transport dimensions: 6900mm x 2800mm x 2800mm (l x w x h) - Transport weight [kg]: 6100kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2008, machine/vehicle number: 26010808, functionality: fully functional, Used machine Year of manufacture: 2008 Condition: Currently still in production Equipment and Technical Data: CNC Control: Siemens 840 D Maximum travel paths of controlled axes: X = 1800 mm Y = 6590 mm Z = 460 mm A = ± 90 degrees C = ± 270 degrees HSD milling unit with 10 kW, liquid-cooled Continuously variable spindle speed up to 24,000 rpm Lifetime grease lubrication Tool holder HSK 63F 1 multi-spindle drilling unit with pneumatic advance, mounted on the milling unit 16 individually selectable vertical drilling spindles 1 horizontal double drilling spindle in X direction and 1 x the same in Y direction Drill holders each 10 mm diameter Note: Workpieces machined with the drilling unit = 900 mm using X/Y reference spindle Milling unit and drilling unit with 200 mm extraction connections, each equipped with pneumatic shut-off valve, joint connection to customer-side extraction system, diameter 300 mm Tool changer: 1 drum-type tool magazine for 5-axis milling unit, 20 positions for tool diameter 90 mm resp. max. 160 mm with sorted placement, maximum tool length 160 mm One saw blade up to max. 300 mm diameter can be stored and changed; this occupies 3 storage positions Special tool lengths up to max. 180 mm possible with corresponding restriction of working area Maximum tool weight 6 kg (including HSK holder) Total magazine weight approx. 60 kg Magazine positioned at the unit output position Machine table: 8 support beams, manually adjustable along the machine length, each beam with 1 lowerable workpiece stop, fixed facing the operator Table area can be split into two clamping zones, per station: - 1 length stop, pneumatically raisable and lowerable - 2 pneumatically raisable and lowerable sliding rails - 1 vacuum circuit Workpiece positioning: 1 Maka laser system Ffodoyr Nwnspfx Adpsw Workpiece clamping: 1 vacuum pump 128 m³/h, dry-running, with 250-liter buffer tank 16 vacuum suction cups, 110 mm diameter Vacuum cup kit for stair production incl. touch valve 1 clamping fixture for posts/curved parts Including chip conveyor Including NC-Hops 5, Wop system Including bumper safety device at the front and fencing on the sides and at the rear Central lubrication Rated power: 21 kW Fuse: 63 A Availability: approx. March 2026 Location: Westerwald

Condition: not inspected (used), Year of construction: 1997, functionality: unexamined, travel distance X-axis: 660 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 380 mm, controller model: HEIDENHAIN TNC 425, spindle speed (max.): 6,000 rpm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item promptly between 04.05.26 and 07.05.26. TECHNICAL DETAILS Travel X-axis: 660 mm Travel Y-axis: 380 mm Travel Z-axis: 380 mm Spindle taper: ISO 40 Spindle speed range: 100 – 6,000 rpm Rapid traverse: 15 m/min Positioning accuracy: ±0.01 mm Repeatability: ±0.005 mm Resolution: 0.001 mm Fedjyr I D Tspfx Adpjfw Table Table dimensions: 700 x 360 mm Max. table load: 300 kg Distance table to floor: 840 mm Distance table center to column min.: 190 mm Distance table center to column max.: 570 mm Tools Max. diameter with adjacent tools: 85 mm Max. diameter with empty adjacent stations: 135 mm Max. tool length: 250 mm Max. tool weight: 6 kg Max. total tool weight: 60 kg Ball screw Pitch: 32 mm Diameter: 10 mm T-slots Number: 3 Width: 18 mm Spacing: 110 mm MACHINE DETAILS CNC control: HEIDENHAIN TNC 425 Connected load: 13 kW Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,000 x 2,450 mm Machine weight: 4,000 kg EQUIPMENT 16-position tool changer Tool holders Measuring probe 4th axis Note: The vise shown in the images is not included in the sale. External reference: Lot 20

Condition: used, Year of construction: 2002, functionality: fully functional, The machining center has been inspected by a Hurco technician and found to be fully operational without any faults. Technical Data Ffsdpfxex Iikbo Adpew - Travel ranges: X 1,270 mm, Y 600 mm, Z 610 mm - Drive power: 30 kW - Spindle speed: 15,000 rpm - Spindle taper: SK 40 Type B - Feed rate: up to 23 m/min Work Table: - Dimensions: 1,500 mm x 660 mm - Max. workpiece weight: 1,300 kg Control: - Hurco Ultimax 4, incl. software for milling simulation - electronic hand control unit - Interfaces: RS 232C / V24 - 2 monitors for text and graphics processing - 2 software units for plain text and ISO programming Machine Construction: - High rigidity, suitable for roughing operations Tool Changer: - Double-arm changer with 24 stations Equipment: - Cooling unit for milling spindle - Rinsing system for chip removal - Splash guard cabin - Coolant system with filtration - Internal coolant supply ICS 20 bar - Chip conveyor Machine Data: - Required space (without service areas!) LxWxH approx. 4,750 mm x 3,120 mm x 2,950 mm - Weight approx. 9,000 kg - Connected load 50 kVA, 400V, 50/60 Hz An inspection of the machine is possible by appointment. All tools and operating materials visible in the photos are not included in the scope of delivery. Technical changes and errors excepted.

Condition: excellent (used), Year of construction: 2014, operating hours: 4,684 h, functionality: fully functional, Controller NCT201 Table size: 950 x 500 mm Maximum workpiece weight: 500 kgs Travel: X 850 mm Travel: Y 510 mm Travel: Z 510 mm 16-position tool changer Spindle taper: SK40 Motor spindle speed: 20 – 10 000 rpm Machine weight: 5,200 kgs Machine dimensions: 2900 x 2330 x 2685 mm Equipment, accessories - Electronic handwheel - 3D touch probe - Several tool holders Ffsdjyr Ildepfx Adpjw - Operating manual Very good condition.

Condition: used, Year of construction: 2012, operating hours: 6,586 h, total height: 2,700 mm, total length: 8,100 mm, total width: 2,450 mm, Empty weight: 4.665 kg Price: On request - Year: 2012 - Documentation available: No - CE certificate present: No - Serial number: AA2/001992 - Operating hours: 6586 - Number of milling spindles [pcs.]: 1 Fjdjyr Iqajpfx Adpsfw - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 4 - - C-axis present: Yes - └ Milling spindle 2: - - C-axis present: Yes - Type milling table: Beam table - Tool clamping system: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: Yes - └ Vertical drilling spindles [pcs.]: 2 - Tool changer positions [pcs.]: 12 - System/software: Xilog plus - Safety feature: Door interlock switches, Enclosed fence, Safety mat - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: Vtlf 250 - └ Year of manufacture: 2001 - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 250 - └ Connection diameter [mm]: 70 - └ Vacuum pressure [bar]: 800 - └ Oil free: Yes - Tools included: Yes - CNC options: Manual control, Offcut conveyor - Table length [mm]: 6000 - Table width [mm]: 1300 - Voltage [V]: 400 - Current consumption [A]: 47 - Fuse [A]: 63 - Transport dimensions: 8100mm x 2450mm x 2700mm (l x w x h) - Transport weight [kg]: 4665kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: good (used), Year of construction: 2015, FOR SALE: OKUMA MILLAC 852VII Vertical Machining Center (2015) Description: High-performance OKUMA CNC vertical machining center for sale, model MILLAC 852VII. Japanese-designed machine, renowned for its exceptional rigidity and surgical precision. Ideally suited for machining complex and heavy prismatic workpieces. Technical Specifications (Source: Manufacturer’s Plate): - Brand: OKUMA Corporation (Made in Japan) - Model: MILLAC 852VII - Year of manufacture: March 2015 (2015.03) Ffjdpfx Adjyr Id Hjpsw - Power supply: 380 V / 3 phase / 50 Hz - Rated power: 44.3 kVA (High-power spindle motor) - Compliance: CE Marked (Certified for the European market) Working Capacities (Standard for model 852VII): - Travels (X / Y / Z): 2,050 mm x 850 mm x 750 mm (Very large capacity) - Table dimensions: 2,200 mm x 850 mm - Maximum table load: 3,000 kg - Spindle speed: Up to 6,000 or 10,000 rpm (depending on configuration) - Spindle taper: BT 50 (High rigidity) - Automatic Tool Changer (ATC): 36 positions (or more, depending on configuration) - Machine weight: approx. 17,500 kg (Ultra-heavy-duty frame) Key features: - Recent machine (2015), still complies with current technology standards - Robust box ways for perfect surface finishes

Condition: like new (used), Year of construction: 2015, operating hours: 9,925 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 55 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, table width: 900 mm, table length: 1,150 mm, table load: 2,000 kg, overall weight: 22,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 9,925 h, coolant supply: 80 bar, tool length: 500 mm, tool diameter: 160 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale: Top-maintained 5-axis simultaneous universal machining center Hermle C52U with a new spindle (replaced in 03/2025) and only 400 hours of operation since replacement! Year of manufacture: 2015 Control unit: Heidenhain TNC 640 Travel paths: X: 1000 mm Y: 1100 mm Z: 750 mm A: +100°/-130° C: 360° Table load: 2000 kg Clamping surface: 1150 mm x 900 mm Equipment: - Heidenhain TNC 640 control - AVD active vibration damping - ACC active chatter suppression Ffodpfx Ajygx Hnjdpow - AFC adaptive feed control - Heavy-duty machining (HDM) - Spindle speed: 18,000 rpm - Spindle interface: HSK-A63 - 60 tool positions - 9-way rotary union - Scraper belt conveyor - A3 Blum tool breakage/tool measurement - 3D touch probe Heidenhain - Electronic thermal compensation - ICS 80 bar with paper band filter - External air blast - Internal air blast - Electronic hand wheel - Hardware kinematic option - Manual cabin door - Automatic cabin roof - Chip rinsing gun ...and much more. The machine is available immediately! The machine is in excellent condition with no defects! All services performed by Hermle! Spindle replacement also carried out by Hermle! Invoice and test protocol available!

Condition: used, 1 unit CNC machining center HK BA 32 CNC with 3 tool cabinets and various accessories, as shown in the pictures and inspection. Color: green. Condition: used. Storage location: production hall / left. Payment method: advance payment by bank transfer. Shipping: Pick-up only – no shipping offered for this item! Ffsdpfxjyr Hygj Adpjw

Condition: used, 1 unit CNC machining center MAZAK NEXUS510C Travel distances X1050mm, Y510mm, Z510mm, with chip conveyor, tool holders, trolley 90x60x100cm, 2x material cabinets 70x55x105cm/50x50x100cm, with various contents, as shown in the photos and inspection, self-disassembly Condition: used Storage location: production hall / right Payment method: advance payment by bank transfer Shipping: Collection only - No shipping offered for this item! Ffsdeyr Hwfspfx Adpow

Condition: used, Year of construction: 1998, 1 unit CNC machining center MAZAK VTC-20C Travel paths: X1660 mm, Y510 mm, Z510 mm, with chip conveyor, workbench 120x70x85 cm and height-adjustable vise, tool holders, cutting tools, tool cabinet 70x55x105 cm with various contents, as per photos and inspection, self-dismantling Year of manufacture: 1998 Condition: used Location of goods: production hall Payment method: advance payment by bank transfer Shipping: Pick-up only – Shipping is not offered for this item! Fjdsyr Hvnopfx Adpefw

Condition: used, 1 unit CNC machining center MAZAK VTC-20B Travel ranges X1120mm, Y510mm, Z510mm, with chip conveyor and rotary table, tool holders, material cabinet 70x55x120cm with various contents, as per pictures and inspection, self-dismantling Condition: used Storage location: production hall / right Payment method: advance payment by bank transfer Ffodpfx Adsyr Ht Tspow Shipping: Collection only – shipping is not offered for this item!

Year of construction: 2017, condition: used, 1 unit 5-axis machining center MAZAK VARIAXIS J-500 Travel X350 mm, Y550 mm, Z510 mm, with chip conveyor, workbench 130x70x85 cm, height-adjustable vise, work chair, tool holders, tool cabinet 50x50x100 cm, as per images and inspection, self-dismantling Color: grey/black Year of manufacture: 2017 Condition: used Location of goods: production hall / right side Payment method: advance payment by bank transfer Ffsdpfxeyr Htge Adpow Shipping: Collection only – shipping is not offered for this item!

Condition: used, Year of construction: 2019, 1 piece of vertical 5-axis machining center in moving column design MAZAK SMOOTH VTC-800/30SR. Travels: X 3000 mm, Y 800 mm, Z 720 mm, max. table load 2500 kg, spindle 18,000 rpm, with milling holders SK 40 and various tools as per photos and inspection, self-disassembly. Color: grey. Year of manufacture: 2019. Condition: used. Location of goods: Production hall / right side. Payment method: Advance payment via bank transfer. Ffedpfx Asyr Hrpedpow Shipping: Collection only – no shipping offered for this item!

Condition: not inspected (used), Year of construction: 1990, functionality: unexamined, machine/vehicle number: 5098, travel distance X-axis: 960 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 380 mm, controller model: HEIDENHAIN TNC 425, spindle speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submission of a bid constitutes an obligation to collect the item within the specified period from 04/05/26 to 07/05/26. TECHNICAL DETAILS Travel X-axis: 960 mm Travel Y-axis: 380 mm Travel Z-axis: 380 mm Table dimensions: 700 x 360 mm Number x width x spacing of T-slots: 3 x 18 x 110 mm Distance from table to floor: 840 mm Maximum table load: 300 kg Distance from table center to column: min. 190 mm, max. 570 mm Positioning accuracy: ±0.01 mm Repeatability: ±0.005 mm Resolution: 0.001 mm Rapid traverse: 15 m/min Spindle speed: 100 to 6,000 rpm Spindle taper: ISO 40 Ball screw X and Y axis: 32 x 10 mm lead diameter Maximum tool diameter (adjacent tool stations occupied): 85 mm Maximum tool diameter (adjacent tool stations free): 135 mm Maximum tool length: 250 mm Permissible tool weight per station: 6 kg Maximum total tool weight: 60 kg MACHINE DETAILS Control: HEIDENHAIN TNC 425 Connected load: 13 kW Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,000 x 2,450 mm Weight: 3,500 kg EQUIPMENT 16-position tool changer 3D probe Ffodpfx Asyr Hlpodpew Note: The machine vice shown in the photos is not included in the scope of delivery. External reference: 25

Condition: not inspected (used), Year of construction: 1992, functionality: unexamined, machine/vehicle number: B5133, travel distance X-axis: 960 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 380 mm, controller model: HEIDENHAIN TNC 425, spindle speed (max.): 6,000 rpm, No reserve price – guaranteed sale to the highest bidder! By placing a bid, you commit to timely collection between 04/05/26 and 07/05/26. TECHNICAL DETAILS Travel X-axis: 960 mm Travel Y-axis: 380 mm Travel Z-axis: 380 mm Table dimensions: 700 x 360 mm T-slot number x width x distance: 3 x 18 x 110 mm Distance table to floor: 840 mm Max. table load: 300 kg Distance from table center to column min.: 190 mm Distance from table center to column max.: 570 mm Ball screw, X and Y axes: 32 x 10 mm Spindle taper: ISO 40 Spindle speed: 100 to 6,000 rpm Rapid traverse: 15 m/min Positioning accuracy: ±0.01 mm Repeatability: ±0.005 mm Resolution: 0.001 mm Max. tool diameter with adjacent tools: 85 mm Max. tool diameter with free adjacent slots: 135 mm Max. tool length: 250 mm Permissible weight per tool: 6 kg Max. total tool weight: 60 kg MACHINE DETAILS Control: HEIDENHAIN TNC 425 Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,000 x 2,450 mm Weight: 3,500 kg Connection: 13 kW EQUIPMENT 16-position automatic tool changer Ffodpfx Adjyr Hinspew 3D touch probe Note: The machine vice shown in the photos is not included in the scope of delivery. External Reference: 23

Condition: used, AWEA BM-1400 is a 4-axis machining center designed for precision, high accuracy and reliability. Table 1500×800 mm; travels X1400 mm, Y800 mm, Z700 mm. Spindle nose ISO 40, 0–12000 t/min (stepless), supply 50Hz 3x400V, total power 40 kVA; weight ≈12000 kg; size L4800×W2850×H3100 mm. Accessories: set of toolholders, high pressure coolant 40 bar, chip conveyor, dividing attachment 4th axis, electronic handwheel, RS‑232 interface, status light. Achieves tight tolerances; typical applications: automotive, aerospace, medical, watchmaking and machine tools. Ffjdpfxeyr Hizo Adpow

Condition: excellent (used), MAKINO V 33i Graphite is a 3‑axis machining center designed for precision, high accuracy and reliability. Capacities: table 750×450 mm with 4 T‑slots 18H8 at 100 mm, table load 300 kg; travels X650 Y450 Z350 mm; workpiece max L750 W635 H250 mm. Specs: spindle HSK E50 (nose–table 150–500 mm), stepless 300–30,000 t/min, torque 23.1 Nm; spindle power 17/13 kW; feed 1–20,000 mm/min, rapid 20 m/min; tool magazine 60 places, tool Ø max 80 mm, length 250 mm, tool change 4.8 s; 3×400 V 50 Hz, air 4–8 bar; machine ≈7700 kg, footprint 2330×2325×2600 mm, installed power 50 kVA. Accessories: lamp, oil‑mist extractor, spindle cooling, EROWA EASY ROBOT loader, status light. Achieves tight tolerances; suits automotive, watchmaking, tooling, aerospace and medical applications. Fodpoyr Hh Rofx Adpofw