Used Traub Tns 42 for sale (90)

Condition: used, Year of construction: 1990, Technical details: turning diameter: 445 mm turning length: 2000 mm turning diameter over bed slide: 660 spindle bore: 65 mm spindle speeds:: 16 - 3150 U/min. rapid motion - x-axis: 10 mm/min rapid traverse Z-axis: 15 m/min total power requirement: 34 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 6 x 2,5 x 2,2 m with CNC Control TX 8 D Nwjdpfjw I R Ndex Ah Hjb C-axis driven tooling 14 station turret head 3 jaw chuck dia. 315 mm tailstock, steady as NC-axis diverse driven toolholders diverse turning toolholders chip conveyor and coolant attachment *

Condition: used, Year of construction: 2005, Technical details: turning diameter: 275 mm turning length: 900 mm spindle passage: 65 mm power capacity at 100 % load: 25/20 kW spindle turning speed range: 1 - 5000 U/min spindle diameter in front bearing: 110 mm c-axis: 1 - 500 U/min. number of workpiece supports: 4 tool turret: 1 x-axis: 290 mm y-axis: 165 mm z-axis: 360 mm b-axis: 360 ° rapid speed: 18/30 m/min number of tools: 2x2 + 2x2 number of driven tools: 2x2 + 2x2 mm toolpiece turning speed range: 8000 / 2000 U/min power capacity: 25% ED 5,8 kW tool taper: TRAUB 60 tool turret: 2/3/4 x-axis: 170 mm z-axis: 600/950 mm y-axis: +/- 60 mm rapid speed: 18/15/30 m/min Nwjdpfswp D Nbjx Ah Hob number of driven tools: 10 mm toolpiece turning speed range: 1 - 6000 U/min power capacity: 25% ED 5,8 kW tool taper: DIN 69880 40 x 63 total power requirement: 95 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 10,0 x 3,5 x 3,0 m with CNC TRAUB TX 8i, Barloader TRAUB Stamag DNH61 / 3000, Main and Sub spindle with C-axis 1 support with B-axis 3 turret supports dust exhauster, coolant attachment with coalescence-seperator and chip conveyor 2 pc. 3-jaw chuck SMW KNCS-N 170-43 2 pc. HAINBUCH Spanntop chuck 40 pc. various tool holder non-driven 6 pc various tool holder driven Spare parts package *

Condition: ready for operation (used), functionality: fully functional, Machine has drilling / threading unit fitted on Nsdpexz R Ilofx Ah Hswb It is included barfeeder.

Condition: used, Year of construction: 1987, operating hours: 80,678 h, functionality: fully functional, Description follows Nwjdpex A Hl Asfx Ah Hjb

Condition: ready for operation (used), Year of construction: 2007, operating hours: 19,441 h, functionality: fully functional, machine/vehicle number: 6000816, turning length: 50 mm, spindle speed (max.): 12,000 rpm, bar passage: 12 mm, controller model: Mitsubishi TX-8i, counter spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning length: 50 mm Main spindle Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Bar capacity: 12 mm Travel in Z1: 50 mm Workpiece clamping: Collet chuck Counter spindle Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Travel in X3/Z4: 222/139 mm Rapid traverse in X3/Z4: 15 m/min Workpiece clamping: Collet chuck Tool Carrier I (X/Y) Technology: Turret with 6 stations (fully driven) Tool holder: Ø25 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X1/Y1: 35/37.5 mm Rapid traverse in X1/Y1: 15 m/min Tool Carrier II (X/Z) Technology: Turret with 6 stations (fully driven) Tool holder: Ø25 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X2/Z2: 35/50 mm Rapid traverse in X2/Z2: 15 m/min Front Attachment Number of stations: 4 Tool holder: Ø28 mm Station pitch: 32 mm Driven tool speed: 12,000 rpm, 4 kW, 7 Nm Number of driven stations: 4 Travel in X3/Z3: 222/139 mm Rapid traverse in X3/Z3: 15 m/min Rear Attachment Number of stations: 4 Tool holder: Ø28 mm Station pitch: 32 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Number of driven stations: 4 Travel in X4: 39 mm Rapid traverse in X4: 15 m/min MACHINE DETAILS Control system: Mitsubishi TX-8i Dimensions & Weight Spindle center height above floor: 1,050 mm Dimensions (L x W x H): 1,450 x 1,098 x 1,700 mm Dimensions (L x W x H) with standard coolant tank: 2,355 x 1,098 x 1,700 mm Weight with control cabinet (max. configuration): 2,000 kg Weight without control cabinet (max. configuration): 1,600 kg Weight with control cabinet (min. configuration): 1,200 kg Weight without control cabinet (min. configuration): 850 kg Operating Hours Power-on hours (control): 19,441 h Automatic mode 1: 7,607 h Automatic mode 2: 6,720 h Production time: 38,989 h Total counter: 50,536 h EQUIPMENT Chip conveyor Nedpfox Hxv Dex Ah Hswb Coolant pump Bar feeder FMB minimag 3200 Workpiece discharge device (tube) Mechanical interface prepared Various fixed holders Rinse gun

Condition: ready for operation (used), Traub 700 734 VEMEM/I interface board, used, in good condition, 100% functional, scope of delivery as per photos. Nedex Eu Tvepfx Ah Hjwb

Condition: ready for operation (used), Year of construction: 2014, Main Drive Number of axis 9 Spindle Speed 8000 RPM This 9-axis TRAUB TNL 32 swiss type turning machine was manufactured in 2014. It features a TX8i-s control with a 64-bit RISC CNC/PLC processor, color TFT display, and electronic handwheel. The main spindle supports a 32 mm bore, and the machine includes a sub-spindle with a C-axis. It offers a dual-driven upper tool turret and a lower turret with nine tool holders. Consider the opportunity to buy this TRAUB TNL 32 swiss type turning machine. Contact us for more information. Nwedpfx Aox D Drcjh Hob Application Types Turning

Condition: good (used), Year of construction: 1996, CNC turning center TRAUB Type:TNC65 DG Year 1996 Control TRAUB TX8F With lots of accessories. Nedeu Eug Iepfx Ah Hswb

Year of construction: 2005, condition: good (used), 7th piece-driven tool holder Suitable for CNC lathe TRAUB TNA 480 tool holder size VDI 40. Njdpfx Ahehwnfko Hjwb Also fits SAUTER tool turrets with VDI 40 holder. 7th piece Horizontal No.3/4/5/6/7/8/9/ for drilling and milling Price per piece 550,-€ 2nd piece Horizontal No.1 and No.2 for tapping Price per piece 600,-€ 1.NC - Drill chuck VDI 40 clamping range 1-13mm Price 100,-€ 1.NC - Drill chuck VDI 40 clamping range 2,5-16mm Price 150,-€

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, spindle speed (max.): 12,000 rpm, turning diameter: 32 mm, overall weight: 7,000 kg, rapid traverse Z-axis: 20 m/min, power: 10.7 kW (14.55 HP), Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, C-axis Nwsdpjx Digljfx Ah Hob Upper tool turret with X/Y/Z/H axis and 10 tool holders Lower tool turret with X/Y/Z/H axis and 9 tool holders Rear device with 8-fold total drive for 3 tools Hinged belt conveyor Resy paper band filter Traub tool monitoring FMB LSK 38 – bar feeder

Year of construction: 1978, condition: used, Article: Programme-controlled automatic lathe Manufacturer: Traub Type: TF60 / 140 Yob: 1978 Nodpfsl Rmqtox Ah Howb Bar automat Please, contact us for getting more information and pictures on mail(at) or *

Condition: not inspected (used), Year of construction: 1989, We are offering the following as part of an insolvency sale: 2 x CNC lathes (1 x with sub-spindle, 1 x with lower turret), used + Bar feeder + Accessories 1. CNC lathe with sub-spindle Make: MIYANO Model: BNC 34-S Year: 1989 Control: Fanuc 0-T - HYDROBAR bar feeder - 2 x collet chucks Njdpfx Asx Ed A Doh Howb - 1 x 3-jaw chuck 2. CNC lathe with 2 x turrets Make: MIYANO Model: JNC 45-T Year: 1989 Control: Fanuc 0-T - HYDROBAR bar feeder - 1 x collet chuck - 1 x 3-jaw chuck 3. Accessories - Approx. 65 x collets - Approx. 40 x jaw sets - Various tool holders + tools - Documentation The machines are untested, but they were in operation until decommissioning. Sale is ex-location; loading can be provided at extra cost.

Condition: good (used), Year of construction: 1989, 1 x automatic lathe Traub TD 16 year of manufacture: 1989 with hydraulic single-bar feed LNS Hydrobar 3.16 -HS 4.4 Year of construction: 1989 Equipment: 6-fold star turret Material quick clamping. Long turning device Central lubrication Vogel Accessories: see photos Nwodpfx Ahovga A To Hjb The machine can be inspected under power.

Condition: like new (used), Year of construction: 2022, operating hours: 13,116 h, Max. bar capacity mm: 20 Max. Z-axis travel (sliding headstock/fixed headstock) mm: 205 / 80 Max. spindle speed rpm: 10,000 Drive power 100%/40% duty cycle kW: 3.0 / 5.5 Torque 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2 C-axis resolution degrees: 0.001 Max. rapid traverse Z m/min: 20 Tool stations: 8 Driven tools: 8 Max. tool speed rpm: 12,000 / 8,000 Tool holder diameter mm: 45 Drive power 100%/40% duty cycle kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 / 165 Slide travel Y mm: ±25.4 Slide travel Z mm: 254 / 567.5 Rapid traverse X/Y/Z m/min: 20 / 20 / 40 B-axis swivel angle degrees: 105 Lower turret: Tool stations: 8 Driven tools: 8 Max. tool speed rpm: 12,000 Tool holder diameter mm: 45 Drive power 100%/40% duty cycle kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 Slide travel Y mm: ±25.4 Slide travel Z mm: 155 Rapid traverse X/Y/Z m/min: 20 / 20 / 40 Back working device: Tool stations: 4 Slide travel X/Y/Z mm: 120 / ±25.4 / 155 Tool holder diameter mm: 25 Sub spindle: Max. spindle bore mm: 20 Max. spindle speed rpm: 10,000 Drive power 100%/40% duty cycle kW: 3.0 / 5.5 Torque 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2 Slide travel X mm: 235.5 Nwjdpfxjwuddve Ah Hsb Slide travel Z mm: 258 C-axis resolution degrees: 0.001 Rapid traverse X/Z m/min: 20 / 40 Coolant system basic unit: Pump pressure bar: 3 / 8 Tank capacity l: 250 Flow rate at 3 / 8 bar l/min: 80 / 120 Filtration degree µm: 200 Machine dimensions Length x width x height mm: see installation plan* Weight kg: 5,000* Connected load kW: 40 (47 kVA)

Condition: good (used), Year of construction: 2004, functionality: fully functional, Dear Sir or Madam, We are pleased to offer you a Traub TNL 26 CNC Swiss-type automatic lathe from the year 2004. The machine is in well-maintained, fully functional condition. Important Note: This particular model is equipped with only one turret. The TNL 26 was also manufactured in versions with two turrets – this offer explicitly refers to the version with a single turret. Technical Data (excerpt): Manufacturer: Traub Model: TNL 26 Year of manufacture: 2004 Control: Traub TX8i-S Turret: 1 unit, lower position, 12 tool stations, driven tools (all-head drive) Bar capacity: 26 / 32 mm Max. main spindle speed: up to 8,000 rpm Drive power: approx. 6.7 kW (100% duty cycle) / 10.7 kW (40% duty cycle) Torque: 21 Nm (100% duty cycle) / 32 Nm (40% duty cycle) Axes: X1 / Y1 / Z1, C-axis integrated in main spindle Chip conveyor: hinge belt, discharge height approx. 950 mm Machine weight: approx. 4,000 – 4,200 kg Dimensions (L × W × H): approx. 4.4 × 1.4 × 1.7 m Condition & Application The machine is immediately available and ideally suited for the precise production of small and medium batches in the automotive, medical and precision engineering industries. Nedpsxgg Rmjfx Ah Hewb Price & Terms Price: on request / negotiable Delivery: ex site, ex works Inspection: possible at any time by prior appointment. Should you require further information or wish to arrange an inspection, I am at your disposal at any time. Best regards, Arnd Sauter GmbH Björn Sauter

Condition: used, Year of construction: 2001, turning diameter 340 mm turning length 750 mm control SYSTEM TX 8H spindle passage 80 mm swing over plan sled 530 mm greates pass round over bed 665 mm turning speed range - main spindle 3.150 min/-1 drive capacity - main spindle 22 kW number of tool places 12 Pos. Nsdsxwdw Ejpfx Ah Howb In our assessment, the machine is in good used condition and can be inspected under power by appointment. Two machines are available. Price per unit. Machine 1: - Images 1-5 - Operating hours approx. 55,790 h Machine 2: - Images 6-10 - Operating hours approx. 54,347 h Technical Features & Accessories: - Y-axis - Accessory package with rigid and driven tool holders - Chip conveyor Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: good (used), Internal item no.: 25090 Nwsdpfjxu Uz Njx Ah Hjb Driven tool holder Index / Traub No.: W 7045003 B Very well-maintained condition! The holder was used on a Traub TNL18.

Condition: good (used), Internal item no.: 25091 Nwedoxvaqlspfx Ah Hjb Driven tool holder Adjustable angle head Index / Traub No.: W 7045011A Very well-maintained condition! The holder was used on a Traub TNL18.

Condition: good (used), Internal item no.: 25088 Nwjdsxu Dcvopfx Ah Hob Tool holder Thread whirling holder incl. cutting inserts Index / Traub No.: 12068219 The tool was used on a Traub TNL18 Very well-maintained condition!

Condition: good (used), Internal item no.: 25093 Driven tool holder Adjustable angle head Nedpfx Ahsxvat To Hjwb Index / Traub No.: W 7045011A Very well-maintained condition! The holder was used on a Traub TNL18.

Condition: good (used), Internal item number: 25092 Driven toolholder Nwjdpfxexvazkj Ah Heb Adjustable angle head Manufacturer: Index / Traub No.: W 7045011A Very well-maintained condition! The holder was used on a Traub TNL18 lathe.

Condition: good (used), Year of construction: 2004, control TRAUB SYSTEM TX8H Nwjdpfx Ajwwl Iuoh Hjb weight 3500 kg range L-W-H 3960 x 1640 x 1800 mm output 11 kW number of spindle speeds 5600 / 4000 min-1 Torque 200 / 280 Nm The TRAUB turning machine TNA 300 was designed for the following machining of workpieces with a turning length of 450 mm. --> for machining metal and plastics with a defined cutting edge using suitable tools. --> for mounting in jaw chucks of sizes 160 to approx. 250 --> for machining material bars up to a Ø of 42 or 65 mm --> with EHS special version Workpiece removal device --> chip conveyor 800 mm long -> Technical data Working range Spindle diameter: 42 mm --> Spindle head DIN 55026, size: A5 --> Clamping fixture diameter: 160-175 mm / 200-250 mm --> turning diameter max: 275 mm --> Distance over turning centre: 35 mm --> max. turning length: 450 mm --> Swing diameter over cross slide: 395 mm --> Swing diameter over bed: 520 mm --> Tool carrier Tool holders for cylindrical shank DIN 60880: 12 pcs. --> Shank diameter: 30 mm --> Chisel cross-section: 20x20 mm --> Switching time 1 station: 0.5 sec. --> Switching time each additional station: 0.15 sec. --> Feed drives X-axis: --> Slide travel: 210 mm --> Feed force: 5000 N --> rapid traverse/path speed: 15 m/min --> Z-axis: --> Slide travel: 450 mm --> Feed force: 6000 N --> rapid traverse/path speed: 18 m/min --> Y-axis: --> slide path: +- 35 mm --> Feed force: 6000 N --> rapid traverse/path speed: 10 m/min --> C-axis: --> Speed: 100 min-1 --> Torque: 140 / 196 Nm --> electrical resolution: 0.001 degree --> tailstock quill diameter: 70 mm --> quill stroke: 60 mm --> Stroke of the quick retraction: 280 mm --> quill setting force at 55 bar: 8600 N --> Mounting according to DIN 228: Mk 4 --> Steady rest Clamping range: 8 - 95 mm --> Workpiece removal device Max. part length: 250 mm --> Max. part weight: 3 kg

Condition: good (used), Year of construction: 2001, TNK 36, year of manufacture 2001 including chip conveyor, Resy filtration system Njdpfxjxv Sr Ie Ah Hewb In good condition, operated without loader, not under power

Condition: used, Year of construction: 2003, max. bar material dia. 65 mm max. bar length 3.000 mm control System TX 8H CNC lathe | TRAUB - TNC 65 equipped with bar loader . The machine is in a well-maintained condition and can be inspected at any time under power. The machine videos from the production plant will be shared on request. Nwedpfx Aexbtp Esh Hjb Technical data of the machine will follow soon. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TNC65 | TNC-65

Condition: excellent (used), Year of construction: 2013, Traub TNL 18-7B CNC Automatic Lathe Base machine: 2441 x 1396 mm Weight: 3800 kg Spindle height above floor: 3800 mm Connected power: 24 kW Main spindle Max. bar capacity: 18 mm Max. speed: 12,000 rpm Cross-cut speed: 5,000 rpm Z stroke: 205 mm Rapid traverse: 40 m/min Z measuring system resolution: 0.001 mm Feed force: 3000 N Spindle head / short taper: Traub short taper mount Max. clamping force: 1400 daN Max. clamping pressure: 40 bar Min. clamping pressure: 7.5 bar Piston area: 40 cm2 Total cylinder travel: 5 mm Clamping tube thread: M25 X 1 Counter spindle Workpiece diameter: 21 mm Workpiece clamping depth: 180 mm Max. speed: 12,000 rpm Strokes: X: 120 mm Y: -20/+40 mm Nedewg Takjpfx Ah Hewb Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Max. clamping pressure: 30 bar Min. clamping pressure: 10 bar Top tool turret with B-axis Number of stations: 8 Shank cross-section, turning tool: 16 x 16 mm Stroke: X: 120 mm Y: -25/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Chip-to-chip time: 0.5 sec Measuring system resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Lower tool turret Number of stations: 7 + counter spindle Shaft cross-section, turning tool: 16 x 16 mm Stroke: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Chip-to-chip time: 0.5 sec Measuring system resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Tool drive for upper tool turret Number of driven stations: Max. 8 Drive power: 2 kW Max. speed: 12,000 rpm Torque: 3.9 Nm Tool drive for lower tool turret Number of driven stations: 7 + counter spindle Drive power: 3.4 kW Max. speed: 12,000 rpm Torque: 7.3 Nm Tool drive for the rear unit Number of stations: 7 Number of driven stations: max. 3 Pitch spacing: 46 mm Drive power: 2 kW Max. speed: 7,500 rpm Torque: 4.7 Nm Drive power: 2 kW Max. speed: 4,000 rpm Torque: 11.8 SCOPE OF OFFER INCLUDES (list is not exhaustive): Traub CNC lathe Tool holders, driven and non-driven High-pressure and belt filter system Oil mist separator Fire extinguishing system Chip conveyor Bar loader Operational documentation For the exact scope of offer, see the photo gallery No liability is assumed for the accuracy, completeness, or timeliness of the information provided.