Driven angle-adjustable tool holder

Traub TNL 18

Condition: excellent (used), Year of construction: 2013, operating hours: 6,000 h, functionality: fully functional, TRAUB TNL 18 – CNC Swiss-Type & Short-Turn Lathe Ex Works, previously used in medical technology, rejection rate 0.3% Machine Type: TNL 18 Machine Number: 6050338 Year of Manufacture: 2013 Condition: Used, very well maintained, productive in current use Included: High-pressure coolant system (KSS) + bar feeder Spindles & Machining Main spindle: motor spindle Max. bar capacity main spindle: 18 mm (optionally 20 mm) Max. main spindle speed: 12,000 rpm Max. torque: up to 10.5 Nm C-axis resolution: 0.001° Counter spindle: available Max. bar capacity counter spindle: 18 mm Max. counter spindle speed: 12,000 rpm C-axis counter spindle: yes Tooling System Upper turret: 8 stations Axes: X / Y / Z / B / H Lower turret: 7 stations Axes: X / Y / Z / H Rear tooling device: 7 stations Max. simultaneous tools in cut: 3 Tool capacity: Standard: 22 Maximum (with multiple holders): up to 52 tools Axes & Dynamics Number of CNC linear axes: 7 Rapid traverse: up to 40 m/min (Z) Large travel ranges for Swiss-type and short-turn operation Simultaneous machining with main and counter spindle: yes Coolant & High-Pressure Coolant tank: approx. 500 l Standard pressure: 3 / 8 bar High-pressure (option, included): up to 20 bar Flow rate: approx. 28 l/min Filtration fineness: 50 μm Electrical Data Dcsdpjycl Udefx Ac Nsc Rated voltage: 400 V / 3~ / N / PE Rated current: 56 A Max. fuse protection: 63 A Rated power: 35 kW Connection load: 24 kVA Frequency: 50 Hz Control voltage: 24 V DC Dimensions & Weight Machine dimensions (L × W × H): approx. 3060 × 1480 × 2420 mm Weight: approx. 4,300 kg Summary (listing short text) TRAUB TNL 18, year 2013 CNC Swiss-type & short-turn lathe Main and counter spindles 2 turrets + rear tooling device High-pressure coolant included Bar feeder included Very rigid production machine Rejection rate only 0.4% Ideal for precision and series production I am selling the following machines: TRUMARK 3010 (TMS 1000) – Laser marking – 2011 US-Bad X-tra pro 300 US (MF2) Flex2 – Cleaning / Ultrasonic cleaning – 2015 Mollart Drillsprint – Gun drilling machine / Deep hole drilling – 1996 Traub TNL 26 – Swiss-type lathe – 2004 Traub TNL 26 – Swiss-type lathe – 2007 Traub TNL 26 – Swiss-type lathe – 2009 Traub TNL 18 – Swiss-type lathe – 2013 Traub TNL 18 – Swiss-type lathe – 2014 Star SV-20R – Swiss-type lathe – 2019 Traub TNL18-9P – Swiss-type lathe – 2015 Traub TNL18 – Swiss-type lathe – 2014 Traub TNL18-9 – Swiss-type lathe – 2013 OTEK CF 1x18 T – Vibratory finishing system – 2011 Rösler FKS 04.1 E Sa-So – Vibratory finishing system – 2020 Grinding bench DP07 – Grinding & polishing (implants) – 1986 Turntable blasting unit Rösler RWT 1000-I – Blasting cabin – 2012 Bending machine C 202 M – Bending – 1990 Schmidt hydro-pneumatic press – Press / hydro-pneumatic press – 2021

Condition: used, Year of construction: 2008, max. wheel diameter 300 mm max. module 8 min. module 0,7 Control SINUMERIK 840 D min/max. pitch cone angle - 90 / + 90 ° Dcodpjvxww Sofx Ac Njc workpiece spindle - bore 127 mm grinding wheel diameter 50 - 230 mm spindle speeds (infinitely variable) 7.500 U/min total power requirement 146 kW work piece spindle speed 700 U/min weight of the machine ca. 21 t dimensions of the machine ca. 9,5 x 3,6 x 3,1 m Measuring probefor tooth gap(integrated on the grinding head) External grinding spindle cooling system ELBARON oil mist extraction (integrated in the machine) Hoffmann coolant filter system Was used for the serial production of spiral-toothed ring gears No clamping devices No grinding wheels / grinding wheel flanges No dressing wheels

Condition: good (used), Year of construction: 2013, operating hours: 43,000 h, functionality: fully functional, Description: The machine is in good technical condition; testing is possible by prior arrangement. The offer also includes an FMB Minimag 20/3200 bar feeder, which ensures smooth and efficient material feeding into the machine. As part of the delivery, we can also provide internal equipment—guide bushings and collets for the main spindle, sub spindle, and feeder—for material diameters of 3–12 mm. Maximum bar capacity: 20 mm (0.8 in) Z1 stroke max.: 205 mm (8.1 in), 80 mm (3.1 in) Maximum spindle speed: 10,000 rpm (both spindles) Power at 100% / 40%: 2.2 / 3.7 kW (3.0 / 5.0 hp) Torque at 100% / 40%: 14 / 23.5 Nm (10.3 / 17.3 ft-lb) Dsdpsyayz Tjfx Ac Necc C-axis resolution: 0.001 degrees Rapid traverse Z1: 40 m (1,574 in) / min Upper turret head Tool mounting: 8 positions Driven tools: 8 positions Power at 100% / 40%: 1 / 2 kW (1.3 / 2.7 hp) Mounting diameter: 45 mm (1.8 in) Turning tool section: 16 x 16 / 12 x 12 mm (0.6 x 0.6 / 0.5 x 0.5 in) X1 axis travel: 120 mm (4.7 in) Rapid traverse X1: 20 m (787 in) / min Chip-to-chip time: s

Condition: used, Year of construction: 2013, operating hours: 43,000 h, functionality: fully functional, spindle motor power: 3,700 W, spindle speed (max.): 10,000 rpm, overall weight: 5,000 kg, total width: 1,500 mm, total length: 4,000 mm, total height: 2,400 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 40 m/min, power: 24 kW (32.63 HP), travel distance Z-axis: 205 mm, Equipment: documentation/manual, We are offering one of our machines for sale, as it is being decommissioned due to a scheduled upgrade of our machinery fleet. The machine is a TRAUB TNL 18P sliding headstock lathe, manufactured in 2013, in good technical condition. The reason for the sale is the acquisition of new technology as part of our machinery renewal program. The current operating hours are 43,000. The offer also includes an FMB Minimag 20/3200 bar feeder, which ensures smooth and efficient material feed into the machine. As part of the delivery, we can also supply internal equipment, including guide bushings and collets for the main spindle, sub-spindle, and bar feeder, suitable for material diameters up to 12 mm. Dodpoxdk Ukjfx Ac Necc If you are interested, please feel free to contact me.

Condition: good (used), Year of construction: 2004, Clampable cutter head type (max.) 460 mm Dedoul Efmspfx Ac Nocc Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: good (used), Internal item no.: 25093 Dcjdpfx Acjxvat Ts Nec Driven tool holder Adjustable angle head Index / Traub No.: W 7045011A Very well-maintained condition! The holder was used on a Traub TNL18.

Condition: excellent (used), Year of construction: 2013, Traub TNL 18-7B CNC Automatic Lathe Base machine: 2441 x 1396 mm Weight: 3800 kg Spindle height above floor: 3800 mm Connected power: 24 kW Main spindle Max. bar capacity: 18 mm Max. speed: 12,000 rpm Cross-cut speed: 5,000 rpm Z stroke: 205 mm Rapid traverse: 40 m/min Z measuring system resolution: 0.001 mm Feed force: 3000 N Spindle head / short taper: Traub short taper mount Max. clamping force: 1400 daN Max. clamping pressure: 40 bar Min. clamping pressure: 7.5 bar Piston area: 40 cm2 Total cylinder travel: 5 mm Clamping tube thread: M25 X 1 Counter spindle Workpiece diameter: 21 mm Workpiece clamping depth: 180 mm Max. speed: 12,000 rpm Strokes: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Max. clamping pressure: 30 bar Min. clamping pressure: 10 bar Top tool turret with B-axis Number of stations: 8 Shank cross-section, turning tool: 16 x 16 mm Stroke: X: 120 mm Y: -25/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Chip-to-chip time: 0.5 sec Measuring system resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Lower tool turret Number of stations: 7 + counter spindle Shaft cross-section, turning tool: 16 x 16 mm Stroke: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Dsdewg Takopfx Ac Nocc Chip-to-chip time: 0.5 sec Measuring system resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Tool drive for upper tool turret Number of driven stations: Max. 8 Drive power: 2 kW Max. speed: 12,000 rpm Torque: 3.9 Nm Tool drive for lower tool turret Number of driven stations: 7 + counter spindle Drive power: 3.4 kW Max. speed: 12,000 rpm Torque: 7.3 Nm Tool drive for the rear unit Number of stations: 7 Number of driven stations: max. 3 Pitch spacing: 46 mm Drive power: 2 kW Max. speed: 7,500 rpm Torque: 4.7 Nm Drive power: 2 kW Max. speed: 4,000 rpm Torque: 11.8 SCOPE OF OFFER INCLUDES (list is not exhaustive): Traub CNC lathe Tool holders, driven and non-driven High-pressure and belt filter system Oil mist separator Fire extinguishing system Chip conveyor Bar loader Operational documentation For the exact scope of offer, see the photo gallery No liability is assumed for the accuracy, completeness, or timeliness of the information provided.

Condition: excellent (used), Year of construction: 2021, INDEX MS22-8 Mfd. 2021 (Commissioned 2022) Djdpfx Ajwt Unvoc Nocc Double NCU (2) Synchrons MBL Bar Feed 3.3 Meters Estimated Hours: 10,000 Contact us for full specifications

Condition: excellent (used), Year of construction: 2018, Tornos Multiswiss 6x32 Dedpfx Ajwf I Rzec Nocc Year of manufacture: 2018 Operating hours: 14,100 hours Including various accessories

Condition: like new (used), Year of construction: 2020, operating hours: 18,000 h, functionality: fully functional, As-new Gear Grinding Machine KLINGELNBERG VIPER 500 W All-inclusive machine equipped for internal and external gearing Equipped with a special converter from EUR kW to US standard connection (simplified global connection) Available due to restructuring at a high-tech family-run company (no automotive production) Working Area and Capacities Max. workpiece diameter: 500 mm Max. grinding stroke: 500 mm Working area over table (min.–max.): 300 – 800 mm Distance between spindle center and table (min.–max.): 442 – 1042 mm Module (generating grinding module): 0.5 – 22 Swivel angle (min.–max.): –180° to +45° Grinding System Grinding wheel diameter (min.–max.): 221 – 350 mm Grinding worm diameter (min.–max.): 221 – 350 mm Max. grinding wheel width: 75 mm Max. grinding worm width: 150 mm Grinding spindle power: 37 kW Max. grinding wheel speed: 6000 rpm Table and Feeds Table diameter: 400 mm Table bore Ø × depth: 100 × 500 mm Max. table speed: 1000 rpm Max. axial feed: 20,000 mm/min Max. radial feed: 12,000 mm/min Max. tangential feed: 20,000 mm/min Connections and Dimensions Total connected load: 60 kVA Machine dimensions (L × W × H): 4220 × 3120 × 2526 mm Filter unit dimensions (L × W): 3490 × 2250 mm Net weight approx.: 19,300 kg Machine Configuration – VIPER 500 W Base Machine and Options VIPER 500 W base machine Preparation for internal grinding arms Internal grinding unit V5 for straight or helical internal gears Measuring system for profile, lead, and pitch of external gears Measuring system for profile, lead, and pitch of internal gears V5 Touch Trigger Phasing System Power supply with ESR voltage drop compensation 100 mm table adapter Preparation for hydraulic clamping devices Hydromechanical unit for drawbar clamping systems Grinding oil filtration system with band filter 100 Fire extinguishing system Automatic work area door Cleaning system with spray gun Crane/hoist integrated into enclosure Isolation transformer Voltage stabilizer and isolation transformer Signal light/beacon tower Software Packages Gear PRO software Software for grinding of spline shafts Software for testing of spline shafts BIAS control software for gear grinding CBN grinding wheel software ADI dressing process optimization DLC lifetime monitoring for dressing tools Flexible profile correction for grinding operations Consumables Endless filter band Assembly/disassembly aid for filter band 100 Diamond dressing rollers Dcedexx T N Topfx Ac Njc CVD dressing roller D200 R1 for profile grinding CVD special dressing roller for generating grinding Grinding wheels Grinding wheel D350 B60 for profile grinding Grinding wheel D350 B45 for profile grinding Profiled grinding wheel D350 B150 for generating grinding Distance rings/intermediate plates 4 intermediate plates B100 22 intermediate plates B60 30 intermediate plates B45 37 intermediate plates B30 Additional Components Grinding wheel flange without intermediate plate Set of standard probes / measuring probes Additional Options Warranty extension from 12 to 24 months Closed Loop 1.0 basic version Interface for external automation