Used Traub Tnl 26 for sale (98)

Condition: excellent (used), Year of construction: 2000, operating hours: 49,274 h, functionality: fully functional, machine/vehicle number: 247, turning length: 80 mm, spindle speed (max.): 12,000 rpm, feed length X-axis: 35 mm, feed length Y-axis: 37 mm, feed length Z-axis: 75 mm, bar diameter (max.): 12 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control: Mitsubishi TX-8i Turning length: 80 mm Main spindle Technology: belt spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Bar capacity: 12.7 mm Travel path in Z1: 75 mm Workpiece clamping: collet chuck Counter spindle Technology: belt spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Travel path in X3/Z4: 222 mm / 139 mm Rapid traverse in X3/Z4: 30 m/min Workpiece clamping: collet chuck Tool carrier I (X/Y) Technology: turret with 6 stations (total drive) Tool holder: Ø 25 mm Tool drive: 8,000 rpm, 1.5 kW, 2.4 Nm Knsdpfxovrz E Hs Affef Travel path in X1/Y1: 35 mm / 37.5 mm Rapid traverse in X1/Y1: 15 m/min Front attachment Number of stations: 4 Tool holder: Ø 28 mm Pitch spacing: 32 mm Tool drive: 12,000 rpm, 4 kW, 7 Nm Number of driven stations: 4 Travel path in X3/Z3: 222 mm / 139 mm Rapid traverse in X3/Z3: 30 m/min Rear attachment Number of stations: 4 Tool holder: Ø 28 mm Pitch spacing: 32 mm MACHINE DETAILS Dimensions: 1,450 x 950 x 1,480 mm Weight: 1,600 kg Connected load: 16 kW Installation dimensions: 7,943 x 1,430 x 1,480 mm Control switch-on time: 96,171 h Switch-on time: 100,147 h Production time: 45,983 h Spindle 1: 49,274 h Spindle 2: 47,771 h Spindle 5: 15,297 h EQUIPMENT - Chip management: Chip conveyor - Coolant management: KSS pump - Raw material feed: Bar loader, FMB minimag 3200 - Finished part removal: Workpiece removal device (pipe) - Emulsion mist extraction: Interface mechanically prepared - Tool holder: Various rigid and driven holders

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 5318, spindle bore: 26 mm, spindle speed (max.): 4,750 rpm, TECHNICAL DETAILS Max round diameter: 26 mm Knjdpfewtq Urex Affjf Max square size: 18 mm Max hexagon size: 22 mm Spindle power: 2.2 kW Number of spindles: 4 Spindle bore: 26 mm Speeds: 1,180 – 4,750 rpm Tool holder: 6 slots MACHINE DETAILS Length L -- R: 1,800 mm Width F -- B: 1,000 mm Height: 1,400 mm Weight: 800 kg Total power: 3.2 kW Operating voltage: 380 V 50 Hz

Condition: excellent (used), Year of construction: 1991, Multi-spindle & bar turning machines TRAUB TD 26 1991 * Spindle power 2.2 kW * Number of spindles 4 * Spindle bore 26 mm * Speeds 1.18 > 4750 mm * Total power 3.2 kW * Length L - R 1800 mm * Width V - H 1000 mm Ksdpfx Ajwc Aqwjffonf * Height 1400 mm * Weight 800 kg * Tool changer 6 tools Additional information * Max. round: 26 mm, max. square: 18 mm, max. hexagon: 22 mm * * Bar loader available

Condition: like new (used), Year of construction: 2022, operating hours: 13,116 h, Max. bar capacity mm: 20 Max. Z-axis travel (sliding headstock/fixed headstock) mm: 205 / 80 Max. spindle speed rpm: 10,000 Drive power 100%/40% duty cycle kW: 3.0 / 5.5 Torque 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2 C-axis resolution degrees: 0.001 Max. rapid traverse Z m/min: 20 Tool stations: 8 Driven tools: 8 Max. tool speed rpm: 12,000 / 8,000 Tool holder diameter mm: 45 Drive power 100%/40% duty cycle kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 / 165 Slide travel Y mm: ±25.4 Slide travel Z mm: 254 / 567.5 Rapid traverse X/Y/Z m/min: 20 / 20 / 40 B-axis swivel angle degrees: 105 Kodpfx Afewuddvofonf Lower turret: Tool stations: 8 Driven tools: 8 Max. tool speed rpm: 12,000 Tool holder diameter mm: 45 Drive power 100%/40% duty cycle kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 Slide travel Y mm: ±25.4 Slide travel Z mm: 155 Rapid traverse X/Y/Z m/min: 20 / 20 / 40 Back working device: Tool stations: 4 Slide travel X/Y/Z mm: 120 / ±25.4 / 155 Tool holder diameter mm: 25 Sub spindle: Max. spindle bore mm: 20 Max. spindle speed rpm: 10,000 Drive power 100%/40% duty cycle kW: 3.0 / 5.5 Torque 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2 Slide travel X mm: 235.5 Slide travel Z mm: 258 C-axis resolution degrees: 0.001 Rapid traverse X/Z m/min: 20 / 40 Coolant system basic unit: Pump pressure bar: 3 / 8 Tank capacity l: 250 Flow rate at 3 / 8 bar l/min: 80 / 120 Filtration degree µm: 200 Machine dimensions Length x width x height mm: see installation plan* Weight kg: 5,000* Connected load kW: 40 (47 kVA)

Condition: not inspected (used), Year of construction: 1996, operating hours: 46,282 h, functionality: unexamined, machine/vehicle number: 18770, controller model: TX 8F, clamping diameter: 65 mm, counter spindle speed (max.): 4,000 rpm, workpiece diameter (max.): 56 mm, No minimum price – guaranteed sale to the highest bidder! Payment deadline for the machine is 20.11.2025! Bidding obligates the buyer to collect within the collection period from 01.12.2025 to 05.12.2025! TECHNICAL DETAILS Max. workpiece diameter: 56 mm Max. clamping diameter: 65 mm Max. counter spindle speed: 4,000 rpm Counter spindle power: 11 kW Counter spindle constant power range: 1:8 Counter spindle torque: 210 Nm Tool drive Max. tool drive speed: 4,000 rpm Tool drive power at 100% duty cycle: 1.5 kW Tool drive power at 15% duty cycle: 4 kW Tool drive torque at 15% duty cycle: 12.4 Nm (4 Nm) Number of tool stations: 10 (14) Cylindrical tool holder: ∅ 30 x 55 mm (25 x 48 mm) Tool shank cross section: 20 x 20 mm (16 x 16 mm) Chip-to-chip time: 1.2 s Indexing time per station: 0.6 s Indexing time over 5 stations: 1.5 s Positioning unit X/Z: 0.001 mm Positioning unit C-axis: 0.001° Kjdsxpgl Aopfx Affonf Fine interpolation increment: 0.34 ms Max. thread pitch: 999,999 mm Max. radius: 99,999.999 mm Max. speed (C-axis): 80 rpm Torque (main spindle C-axis) at 100% duty cycle: 100 Nm Accuracy (main and counter spindle C-axis): ± 3 min Rapid traverse and path speed: 30,000 mm/min Rapid traverse: max. 15 m/min Thrust at 100% duty cycle: 6,000 N Travel distance: 520 mm Ball screw size (∅ x pitch): 32 x 10 mm Feed override: 0 – 200% Rapid traverse override: 0 – 100% Spindle speed override: 50 – 120% MACHINE DETAILS Control: TX 8F Dimensions & Weight Dimensions (L x W x H): 11,000 x 2,000 x 2,600 mm Weight: 6,000 kg Electrical Data Operating voltage: 400 V Frequency: 50 Hz Control voltage: 230 V Nominal current: 85 A Connection rating: 54 kW Power consumption: 39 kW Noise emission at operator position: 71 dB(A) Temperature range: 5 – 40 °C Max. humidity: 70% System hydraulic pressure: 60 bar Hydraulic tank capacity: 150 l Coolant pump pressure: 5/12 bar Tank capacity without chip conveyor: 300 l Tank capacity with chip conveyor: 280 l Input Spindle speed input: 5 digits Cutting speed input: 4 digits Tool input: 4 digits Program number: 8 digits Subprogram number: 8 digits Block number: 4 digits M-codes: 3 digits B-codes: 6 digits Memory capacity: 32,000 characters Operating hours: 46,282 h (as of 17.10.2025) EQUIPMENT Two 10-station tool turrets with driven tool stations HAINBUCH chuck system Counter spindle Bar feeder from STAMAG Chip conveyor

Condition: excellent (used), Traub TNL12 CNC Swiss 12mm Capacity Production hours: 25596 hr. Kraft & Bauer Fire Suppression System Knsdow R E Adopfx Affef Paper filter: Kompatkt Band Filter Configured as pictured (more photos to follow) Put into production in 2009 (originally show model) 12-ft FMB Bar Feed Mist Collector Chip Conveyor “2 machines available”

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 - Number of turrets : 1 MAIN SPINDLE Knjdpfx Asuhawzsffef - Max. bar diameter : 12,7 [mm] - Max. machining length : 130 [mm] - Spindle speeds : 12.000 [rpm] - Spindle power : 2,5 [kW] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Max. bar diameter : 12,7 [mm] - Spindle speeds : 12.000 [rpm] - Spindle power : 2,5 [kW] LOWER TURRET - Number of positions : 6 - Number of motorized positions : 6 - X/Z stroke : 35/50 [mm] - Live tools speed : 8.000 [rpm] END ATTACHMENT - Number of positions : 4 SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 12.000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 18 [kW] EQUIPMENT - CNC : Traub TX8i - Interface : RJ45 / PCMCIA - Spindle brake : on main spindle - Parts catcher - Coolant tank : 200 [l] - Chips conveyor : KNOLL - Bar loader : FMB Minimag 3200 C - Number of turning tool holders : 2 - Number of fixed tool holders : 14 - Collets collection for chuck : F20 - Collets collection for chuck : F16 - Sockets : 4 - Set of shells and collets for bar feeder - Set of spare parts

Condition: excellent (used), manufacturer: GRÜN SYSTEMTECHNIK WETZLER Knjdjx I N Imspfx Affsf including case We offer an original ATC measuring microscope, originally taken from a TRAUB TNA turning center. The unit is designed for installation in the automatic tool changer and can be used on various CNC machines with a suitable toolholder interface (size comparable to TRAUB TNA400 Key Features & Benefits: • Universal application: Suitable for any CNC machine with compatible toolholder interface. • Fast tool setup: Enables direct measurement of cutting edges, tool lengths, and radii inside the machine. • Process reliability: Tool wear can be identified immediately and corrected without removing the tool. • Precise referencing: Useful for checking zero points, bores, and fixtures directly in the setup. • Time savings: Eliminates the need for external presetting devices and reduces downtime. • Compact & robust design: Easy to integrate and operate within the tool changer system. This ATC measuring microscope turns your CNC machine into a precise measuring station, helping you achieve higher accuracy, shorter setup times, and improved process reliability.

Condition: used, Year of construction: 1990, Technical details: turning diameter: 445 mm turning length: 2000 mm turning diameter over bed slide: 660 spindle bore: 65 mm spindle speeds:: 16 - 3150 U/min. rapid motion - x-axis: 10 mm/min rapid traverse Z-axis: 15 m/min total power requirement: 34 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 6 x 2,5 x 2,2 m with CNC Control TX 8 D C-axis driven tooling 14 station turret head 3 jaw chuck dia. 315 mm Knjdpsw I R Ndefx Affsf tailstock, steady as NC-axis diverse driven toolholders diverse turning toolholders chip conveyor and coolant attachment *

Condition: ready for operation (used), Traub 700 734 VEMEM/I interface board, used, in good condition, 100% functional, scope of delivery as per photos. Knjdpfxsx Eu Tvo Affsf

Condition: good (used), Year of construction: 1996, CNC turning center TRAUB Type:TNC65 DG Year 1996 Control TRAUB TX8F With lots of accessories. Knedpfxou Eug Io Affsf

Condition: good (used), Year of construction: 2001, Ref. -No.: 10551 Manufacturer: TRAUB Type: TNC 42/65 Year of construction: 2001 Type of control: CNC Control: TRAUB TX Storage location: Halberstadt Country of origin: Germany Machine-No.: 93XXXXX Turning Speeds: 8000 RPM X stroke: 450 mm Turning Length: 450 mm Spindle Speeds: 4000 RPM Clamping Diameter: 42 / 65 mm Spindle Diameter In Front Bearing: 110 mm Tool Taper: 14 Max. Torque: 170 / 230 Nm Rapid Travel Speed X-Axis: 15 m / min Rapid Travel Speed Y-Axis: 6 m / min Rapid Travel Speed Z-Axis: 30 m / min Dimensions Of The Machine (Lxwxh): 4354 x 2076 x 1917 m Chisel slide cross section turning and milling support: 16 x16 ( 20 x20 ) mm Pressure: 70 bar hydraulic tank: 70 L. Total Power Requirement: 39 kVA Weight Of The Machine Ca.: 5,2 t Feed force X-axis at 100% duty cycle: 5000 N Feed path X-axis: 140 mm Z-axis feed path: 450 mm Y-axis feed path: 35 mm Ball screw Z-axis (Ø x pitch): 32 x 10 mm Ball screw X-axis (Ø x pitch): 32 x 5 mm Ball screw Y-axis (Ø x pitch): 25 x 5 mm Further information: - Revolver 1 Number of branches 10 - Revolver 2 Number of branches 14 - Hecowpkfie Htlx Tfefh - Powered tools Yes Kodpfx Aex A R U Ujffenf

Condition: good (used), Year of construction: 2003, driven tools, Y-axis, B-axis TRAUB TX8 H control Knsdpfx Asx A Evmoffsf Turning diameter max 275 mm Turning length -450 mm Spindle speeds 5'600 rpm Turret head 12 driven positions Barloader Piece catching device Misc. accessories MARCELS MASCHINEN CH

Year of construction: 2007, operating hours: 24,593 h, condition: used, machine/vehicle number: 5010481, Max. turning diameter: 340 mm, max. turning length: 750 mm, max. spindle speed: 4,000 rpm, chip conveyor, TX 8I control system, 12-position turret Knsdox Akmqjpfx Affjf

Condition: not inspected (used), Year of construction: 1989, We are offering the following as part of an insolvency sale: 2 x CNC lathes (1 x with sub-spindle, 1 x with lower turret), used + Bar feeder + Accessories 1. CNC lathe with sub-spindle Make: MIYANO Model: BNC 34-S Year: 1989 Control: Fanuc 0-T - HYDROBAR bar feeder - 2 x collet chucks - 1 x 3-jaw chuck 2. CNC lathe with 2 x turrets Make: MIYANO Model: JNC 45-T Year: 1989 Control: Fanuc 0-T - HYDROBAR bar feeder - 1 x collet chuck - 1 x 3-jaw chuck 3. Accessories - Approx. 65 x collets - Approx. 40 x jaw sets - Various tool holders + tools - Documentation Knedpfex Ed A Djx Affjf The machines are untested, but they were in operation until decommissioning. Sale is ex-location; loading can be provided at extra cost.

Year of construction: 2001, condition: good (used), bar diameter min. 18mm / max. 63mm bar lenght min. 1000mm / max. 4200mm Kedpfoi Dagcox Affonf

Year of construction: 2005, condition: good (used), 7th piece-driven tool holder Suitable for CNC lathe TRAUB TNA 480 tool holder size VDI 40. Also fits SAUTER tool turrets with VDI 40 holder. Kodpfxehwnfke Affjnf 7th piece Horizontal No.3/4/5/6/7/8/9/ for drilling and milling Price per piece 550,-€ 2nd piece Horizontal No.1 and No.2 for tapping Price per piece 600,-€ 1.NC - Drill chuck VDI 40 clamping range 1-13mm Price 100,-€ 1.NC - Drill chuck VDI 40 clamping range 2,5-16mm Price 150,-€

Condition: used, Year of construction: 1993, Technical details: x-travel: 400 mm y-travel: 300 mm z-travel: 400 mm spindle revolutions per minute : 8000 U/min control: Fanuc OM clamping table: 500x300 mm magazine slots: 16 Stück tool taper: SK40 distance work spindle /surface of the table max.: 50-450 mm numbers of pallets: 2 Stück/part total power requirement: 10 kW weight of the machine ca.: 2,5 t dimension machine xH: 2,4x1,8x2,5 m transport measurements machine: 2,45x1,8x2,5 m - E-cabinet - cooling device - chip conveyor manufacturer META (conveying height 1500mm; width 200mm) Ksdpfxju Idn He Affonf *

Condition: used, Year of construction: 1987, operating hours: 80,678 h, functionality: fully functional, Description follows Knjdpjx A Hl Aofx Affef

Condition: new, Year of construction: 2025, functionality: fully functional, Traub TFT Monitor/Screen TX8D, TX8F, TX8H Replacement Monitor Replacement Screen Type: TFT (1) Item No.: 222549 (2) Item No.: 10892558 Condition: new Traub TFT monitor/screen TX8D, TX8F, TX8H Includes frame and cable, 1:1 interchangeable, 12" Plug and Play solution Not an original Traub spare part – 100% tested and compatible Ksdpfx Afjx Adb Iofenf Manufactured by cnc-markt GmbH

Condition: not inspected (used), Year of construction: 1989, We are offering the following as part of an insolvency sale: 2 x CNC lathes (1 x with sub-spindle, 1 x with lower turret), used + Bar feeder + Accessories 1. CNC lathe with sub-spindle Make: MIYANO Model: BNC 34-S Year: 1989 Control: Fanuc 0-T - HYDROBAR bar feeder - 2 x collet chucks - 1 x 3-jaw chuck 2. CNC lathe with 2 x turrets Make: MIYANO Model: JNC 45-T Year: 1989 Control: Fanuc 0-T - HYDROBAR bar feeder - 1 x collet chuck - 1 x 3-jaw chuck Kjdpfx Aox Edz Tjffsnf 3. Accessories - Approx. 65 x collets - Approx. 40 x jaw sets - Various tool holders + tools - Documentation The machines are untested, but they were in operation until decommissioning. Sale is ex-location; loading can be provided at extra cost.

Condition: good (used), Year of construction: 1986, controller manufacturer: TRAUB, controller model: TX 8, number of spindles: 1, CONTROLS .. CNC controls TRAUB TX 8 BASIC FUNCTIONS .. number of spindles: 1 .. number of x/z slides: 1 .. number of turrets: 1 .. live positions: yes .. number of c-axes: 1 WORKING RANGE TURNING .. swing diameter (max): 450 mm .. turning diameter (max): 350 mm .. bar diameter (max): 60 mm .. worpiece length max.: 490 mm MAIN SPINDLE .. spindle revolutions (max): 4000 /min .. c-axis: yes TOOL MAGAZINE .. number of positions: 12 ELECTRICAL SPECIFICATIONS .. total power consumption: 39 kW .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 3150 mm .. space requirements -front/back-: 2100 mm .. total height: 2100 mm .. total weight approx.: 4000 kg ATTACHMENTS (TURNING) .. tailstock: yes Ksdpexxqbyofx Affenf - Machine in good condition Features: - Complete tool holders (very comprehensive) - Includes driven tool holders - Documentation

Condition: good (used), Year of construction: 2012, functionality: fully functional, Description follows Knedpfxex A Hdfo Affjf

Condition: not inspected (used), Year of construction: 1989, We are offering the following as part of an insolvency sale: 2 x CNC lathes (1 x with sub-spindle, 1 x with lower turret), used + Bar feeder + Accessories 1. CNC lathe with sub-spindle Make: MIYANO Model: BNC 34-S Knsdsx A Aw Iopfx Affof Year: 1989 Control: Fanuc 0-T - HYDROBAR bar feeder - 2 x collet chucks - 1 x 3-jaw chuck 2. CNC lathe with 2 x turrets Make: MIYANO Model: JNC 45-T Year: 1989 Control: Fanuc 0-T - HYDROBAR bar feeder - 1 x collet chuck - 1 x 3-jaw chuck 3. Accessories - Approx. 65 x collets - Approx. 40 x jaw sets - Various tool holders + tools - Documentation The machines are untested, but they were in operation until decommissioning. Sale is ex-location; loading can be provided at extra cost.

Condition: good (used), Year of construction: 1999, operating hours: 10,170 h, functionality: fully functional, spindle bore: 42 mm, Description follows Kjdpfxex A Ha Hs Affenf