Used Tos W 100 A for sale (49,985)

Condition: excellent (used), Year of construction: 1991, A very well-preserved milling machine, make: TOS KURIM, model: FGS 32/40, machine no.: 23304040, equipped with digital readout and milling cutters. Kfedpfsxzdnxjx Affoa Table clamping area: 320x1400 mm Longitudinal table travel: 1000 mm Transverse travel of milling head: 400 mm Vertical table travel: 450 mm Table taper: ISO 50 Spindle diameter at front bearing: 100 mm Maximum spindle torque: 1500 Nm With vertical milling head Video available on request Weight: 4400 kg

Condition: used, Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K with Kedpfx Asxt Hn Soffefa MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG and Load Cell TC-LC100KN.G02 (100 kN) The testXpert III 1.6 software serves as control and evaluation software for ZwickRoell materials testing machines. It enables standardized test procedures, logs measurement data, and supports traceability, among other features. Windows 11 Compatibility: ZwickRoell’s testing software (especially testXpert III) supports current Windows platforms, allowing use with Windows 11. Product Description: For sale is a high-quality materials testing system, consisting of: - Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K - MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG - Load Cell TC-LC100KN.G02 (100 kN) The system comes from laboratory usage and was employed for mechanical materials testing at ambient and high temperatures. All devices are used, well-maintained, and fully functional. Technical Highlights – Zwick/Roell Testing Machine Type: BTC-FR100SW.A4K Maximum test force: 100 kN AC drive 4 kW, widened stand design (W) Supply: 400 V / 50–60 Hz / 3Ph+N+PE, power consumption 9 A Working area: Height 1,765 mm, Width 1,030 mm Crosshead speed: 0.0005 – 1000 mm/min Positioning accuracy: < 2 µm Noise level: ≤ 70 dB(A) Test force range: 0.4–100% (Class 1) / 2–100% (Class 0.5) according to ISO 7500/1 Power requirement: 5.0 kVA Load frame height: approx. 2.32 m Machine weight: approx. 1,820 kg Load Cell: TC-LC100KN.G02 (IP67, GTM, 100 kN, 20 kg) Technical Highlights – MAYTEC High-Temperature Furnace Maximum temperature: 1200 °C 2 separately controllable heating zones Power: 0.66 kW / 22 A per zone Supply: 30 V / 50 Hz per zone Ideal for high-temperature testing in combination with the Zwick testing machine Load Cell TC-LC100KN.G02 Nominal force: 100 kN Protection rating: IP67 Precise force measurement to ISO 7500/1 Weight: 20 kg, GTM design Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG Load Cell TC-LC100KN.G02 (100 kN) Connection cables and mounting accessories (if available) (Specifications and technical data may be subject to change and errors.) Further questions can be answered by phone.

Condition: good (used), Year of construction: 1998, functionality: fully functional, TOS Galanta SUIL 40A – Lead and feed screw lathe For sale is a well-maintained, mechanically overhauled (2009) lead and feed screw lathe, TOS Galanta SUIL 40A, year of manufacture 1998. Technical Data Manufacturer: TOS Model: Galanta SUIL 40A Machine number: 0219 Year of manufacture: 1998 (mechanically overhauled 2009) Dimensions: approx. 2.2 m × 1.1 m × 1.75 m Weight: 1,620 kg Main drive: 5.5 kW Max. spindle speed: 3,150 rpm Spindle bore: 50.2 mm Distance between centers: 1,000 mm Kfedpoxy R Hxsfx Affea Center height: 200 mm Swing over bed: 400 mm Condition: ready for operation (used) Included accessories Three-jaw chuck Tailstock Steady rest Coolant system Change gear set Operating manual (German) The machine is fully functional. Inspection possible by appointment.

Condition: good (used), travel distance X-axis: 4,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 2,000 mm, table load: 20,000 kg, Spindle diam. 130 mm Spindle nose attachment iso 50 X-axis stroke: 4000 mm Y-axis stroke: 3000 mm (vertical) Kedpfx Aovxvcajffjfa Z-axis stroke: 2000 mm W-axis stroke: 800 mm Spindle motor power 37 kw Spindle speed 0 - 3000 rpm Table 1800 x 2500 mm Table capacity 20 tons CNC HEIDENHAIN TNC I 530 ATC 60 places Chip conveyor Electronic handwheel Coolant through spindle Spindle sleeve

Year of construction: 2006, condition: ready for operation (used), A manual parts cleaning machine D.W. Renzmann for the printing industry with exhaust air system is available. Useful dimensions X/Y/Z: 1800mm/600mm/300mm, washing pump capacity: 5m³/h, internal extraction: 2000m³/h and 1.1kW, dimensions X/Y/Z: approx. 2900mm/1200mm/1800mm. Documentation available. On-site inspection is possible. Kfjdpfx Aotul Nvsffea

Condition: as good as new (ex-display), Year of construction: 2025, TOS Varnsdorf WH 10 CNC Heidenhain TNC620 / Sinumerik ONE Work spindle diameter 100 / 105 mm Clamping taper ISO 50 Tool shank 69871 DIN Clamping adapter - screw TOS 4100793 Main motor power (S1/S6-40%) 22/34 kW Max. spindle speed 2500 / 3000 rev/min Max. torque of the spindle (S1/S6-40%) 2173/3250 Nm Table transverse travel X 1250 / 1800 mm Kodpfx Aepdrzzoffsfa Headstock vertical travel Y 1100 / 1250 mm Table longitudinal travel Z 1000 mm Spindle stroke W 630 mm Table clamping surface 1000x1100 / 1200x1400 mm Workpiece weight max. 3,000 / 4000 kg Feed range 4 – 6000 mm/min Total power consumption 50 kVA Machine weight 13 000 kg Features mechanical side - hardened guide surfaces on all axes - Biplast-V lining for the guide ways counter surfaces - Geometric accuracy according to the accuracy protocol TOS Varnsdorf WH 10 - Sliding working spindle with diameter of 100 mm, spindle bearings - FAG, SKF - hydraulic tool clamping set 22kN - Ott-Jakob - Headstock with cooling circuit - reTOS Varnsdorf - Ball screws on the X, Y, Z and W axes - KSK Kurim - Rim and pinion for precise rotary table positioning - reTOS Varnsdorf - Hydraulic system (unit, pumps, hoses, fittings) - Baseco - Rotary table reinforcement controlled by CNC system - Central lubrication system controlled by CNC system - Tribotec - Telescopic covers (X and Z axes) Features electrical side - CNC control system iTNC 620 Heidenhain Gen3 - Servo-motors Siemens 1FKZ 100…(5 pcs.) - Spindle motor 1PH8135... - 22kW - Converter Heidenhain UM114D - Linear scales Heidenhain for X, Y and Z axes - Encoder Heidenhain ROD 480 for rotary table - Encoder Heidenhain TTR ERM for spindle - Oriental stop - Control cabinet from Ritall with cooling unit - Wiring and modern electrical components - End-limit switches Balluff - Rotational control panel - Workplace lighting Other - Electrical inspection report, technical documentation - Certificate of geometric accuracy WH 10 Tos Varnsdorf - spindle ball-bar test protocol, linear scales accuracy protocol - cooling of work space placed on spindle forehead (tank, pump, hoses) - working spindle support with brass bushings SP200 Tos Varnsdorf - Heidenhain Options nr. 8, 19 and 20 - Heidenhain HR510 handwheel - Heidenhain Linear scales upgrade to LC115 series for X, Y and Z axis

Condition: good (used), Technical specifications: Kfsdpfx Afov E Nafefja -table surface: 400 x 1400 mm - longitudinal movement of the table - X axis: 1000 mm - lateral movement of the table - Z: 450 mm -vertical table movement - Y axis: 400 mm -spindle cone: ISO 50 -Spindle speed: 35.5 - 1800 rpm total machine power: 11 kW

Condition: used, Distance between centers 2000 mm Center height 250 mm Kfsdpfexv Shpox Affja Sving over bedways 500 mm Swing over cross slide 330 mm Spindle speeds 14-2240 rpm Equipped with: 3-jaw chuck 250 mm 4-jaw chuck 370 mm 2 pcs. steady rests Quick change tool post w/ 12 side holders Grinding support Various cutting tools

Condition: excellent (used), Year of construction: 2000, operating hours: 59,458 h, functionality: fully functional, machine/vehicle number: 1926, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,250 mm, table width: 1,800 mm, table length: 2,200 mm, table load: 15,000 kg, overall weight: 48,000 kg, spindle speed (min.): 5 rpm, spindle speed (max.): 2,500 rpm, power: 48 kW (65.26 HP), quill diameter: 130 mm, quill travel distance: 630 mm, Equipment: cabin, rotational speed infinitely variable, Technical Specifications X-axis travel: 3,500 mm Y-axis travel: 2,500 mm Z-axis travel: 1,250 mm Table size: 1,800 × 2,200 mm Table load capacity: 15,000 kg Spindle speed (max): 2,500 rpm Spindle diameter: 130 mm Control: HEIDENHAIN TNC 426 Number of axes: 5 Automatic tool changer: 60 positions Tool holder: ISO 50 Operating Hours Machine on-time: 59,458 h Spindle running hours: 23,258 h Equipment & Features Operator's cabin Kedpfexyu Dzex Affjfa Complete machine documentation included

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Demonstration machine BUB 63 CNC 3000 Centre height: 630 mm Centre distance: 3000 mm Kodpfx Ajv N D Hbjffjfa 1 grinding wheel: 500/380 x 100 x 203 mm

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 985 mm, travel distance Z-axis: 900 mm, table load: 2,500 kg, spindle speed (min.): 5,000 rpm, spindle speed (max.): 5,000 rpm, total height: 3,885 mm, total length: 4,490 mm, total width: 5,700 mm, table length: 800 mm, table width: 800 mm, feed rate X-axis: 4 m/min, feed rate Y-axis: 4 m/min, feed rate Z-axis: 4 m/min, rapid traverse X-axis: 8 m/min, rapid traverse Y-axis: 8 m/min, rapid traverse Z-axis: 8 m/min, Technical machine data: Manufacturer: TOS Kuřim Overall length: 4,490 mm Kfedpsxxxg Djfx Affea Overall width: 5,700 mm Overall height: 3,885 mm Total weight: 21,000 kg Total power consumption: 65 kVA Longitudinal travel X-axis: 1,250 mm Transversal travel Y-axis: 985 mm Vertical travel Z-axis: 900 mm Workholding base positioning (pallet): 360° x 1 Spindle taper: ISO 50 Working spindle (number of speeds / speed range): stepless / 10–5,000 rpm Spindle motor power: 22.5 kW Max. spindle torque: 1,000 Nm Feed range X–Y/Z (number of steps / range): stepless / 1–4,000 mm/min Rapid traverse X–Y/Z: 8,000 mm / min Number of pallets: 2 pcs Pallet dimensions (width x length): 800 x 800 mm Max. pallet load: 2,500 kg Tool changer – number of tools: 50 pcs

Condition: used, Technical data: Printing width: 600 mm Kjdjxxmz Nspfx Affjfa Colors: 4 Chamber doctor blade units: 3 Application: Inline with bag-making machine Condition: used

Condition: good (used), axle configuration: 3 axles, first registration: 07/2007, suspension: air, Year of construction: 2007, Equipment: ABS, Brakes: disc brakes Suspension: air suspension Kfodpfjxxbamsx Affja Rear axle 1: Tyre tread left: 50%; Tyre tread right: 50% Rear axle 2: Lift axle; Tyre tread left: 50%; Tyre tread right: 50% Rear axle 3: Steering axle; Tyre tread left: 50%; Tyre tread right: 50% Technical condition: good Visual condition: good Please contact Andre, Henri or Andre for further information.

Condition: new, We sell spare parts for the following milling machines: FN20, FNGJ20/30, FNGJ32, FNGJ40, FNGJ50, FNGP, FNG CNC FB3, FB4, FB5, FB6 as well as for lathes S32. Kfjdpsufgb Isfx Affoa

Condition: excellent (used), TOS SVITAVY FWC 50.2 Planing width: 500 mm Max. planing height: 200 mm Lower cutterhead: 4 knives 5.5 kW motor Upper cutterhead: 7.5 kW Right spindle diameter: 40 mm 4 kW motor Kfedpfsw A I Iujx Affoa Left spindle diameter: 40 mm 4 kW motor Electric height adjustment

Year of construction: 2009, condition: reconditioned (used), 4-SIDED 5-HEAD PLANER TOS SVITAVA LIGNUM 4-SIDED 5-HEAD PLANER TOS SVITAVA LIGNUM 5-HEAD PLANER 240 MM WITH A GROOVED TABLE AFTER A COMPLETE RENOVATION FWH 225mm 23kW total power Kfjdjndcg Nspfx Affsa

Condition: ready for operation (used), Year of construction: 1970, functionality: fully functional, machine/vehicle number: 50052, Year of manufacture: 1970 Serial number: 50 052 The machine was overhauled in 2007. GENERAL CHARACTERISTICS OF THE MACHINE The machine features a fixed gantry with a moving table. The gantry is equipped with a height-adjustable crossbeam, which can be fitted with one or two vertical spindles in the VF 120 version. The gantry can also be fitted with one or two side-mounted (horizontal) VF 160 headstocks. The clamping surface consists of two interconnected clamping tables, which can also be used individually when disconnected (only one table can be operated at a time). Clamping Table: Dimensions of one table: 1,600 x 3,000 mm Total length of connected tables: 7,000 mm Clamping surface of connected tables: 6,500 mm Clamping T-slots (width x pitch x number): 28 mm x 160 mm x 9 pcs Table height from base: 900 mm Travel of one table: 3,000 mm (connected tables: 6,500 mm) Table feed rate: 20 – 2,000 mm/min Rapid traverse: 4,000 mm/min Gantry with height-adjustable crossbeam: Clearance between side columns: 2,020 mm Crossbeam height adjustment: 110 - 1,685 mm Crossbeam feed rate: 1,450 mm/min VF 160 Horizontal Headstock: Taper: ISO 60 Motor power: 30 kW Speed range: 15 – 710 rpm Kodpexxwy Aofx Affjfa Feed rate: 10 – 2,000 mm/min Number of speeds: 16 VF 120 Vertical Headstock: Taper: ISO 50 Motor power: 18 kW Speed range: 28 – 910 rpm Number of speeds: 16 Overall machine dimensions (L x W x H): 14,780 mm x 5,650 mm x 4,800 mm

Condition: excellent (used), functionality: fully functional, total width: 1,700 mm, total height: 1,800 mm, total length: 2,200 mm, planing width: 500 mm, height adjustment type: electric, overall weight: 2,000 kg, planing height: 200 mm, chip removal: 160 mm, number of blades: 4, working height: 200 mm, number of planer blades: 3, table width: 500 mm, pass-through height: 200 mm, extraction connection diameter: 160 mm, number of feed rollers: 3, Four-sided planer made in Czech Republic with adjustable spindles and segmented shaft. MACHINE FULLY OPERATIONAL AFTER INSPECTION. TECHNICAL PARAMETERS: -planing width 500 mm -planing height on both sides 200 mm -planing height on four sides 140 mm (possibility of mounting larger heads up to 200 mm -- planing) -spindle diameter 40 mm -max. tool diameter 200 mm -4 knife shafts -horizontal shaft motor power 2 x 7.5 kW -spindle motor power 2 x 4 kW -feed motor power 0.78 kW -electric height adjustment -feed speed smoothly adjustable -3 rollers in the table -two upper segmented pulling shafts -smooth receiving pulling shaft -guiding ruler -connector diameter 2 x 160 mm MACHINE DIMENSIONS: - length: 2200 mm - width: 1700 mm - height: 1800 mm - weight ~ 2000 kg Possibility of financing the machine through leasing or installments. Just visit our website: jbsmaszyny.pl I invite you to test the machine. Where can you see our machines? Kodpfx Afjwfihuofofa JBS WOODWORKING MACHINES WOLICA DRUGA 26 23-310 MODLIBORZYCE Transport of machines all over the world!

Year of construction: 1989, condition: excellent (used), machine/vehicle number: 0435532, MACHINE DATA Machine type Hobbing Cutter – Gear cutter Manufacturer TOS Model FO-10 Year 1989 Serial Number 0435532 Condition Very good-almost new Yet in operation Max Module 14 Min Module 1.5 Max diam. 1500mm Max Width 450mm From Z9 teeth until Z448 Main drive 12 Kw Weight 9800Kg Original color RAL 6017 Book operation – service Dimensions L 3200 – W 1800 – H 2530 Full extra accessories – parts – all module cutters Ready to work without any expensive Kfoded R Ri Ujpfx Affja PRICE 70.000€

Condition: used, Year of construction: 2020, 8x P+W Metalbau 53m³ Silos for PP/ PS Granules. Aluminimum panel construction, Diameter approx 3,000mm, Height approx 10,000mm, Pipework and loading control system. Kodpfxext Hiis Affofa Please note: Silo drawings available upon request

Condition: good (used), Grindable, largest diameter: 200 mm Kfodpfx Aslz Nxweffja Center distance: 450 mm Weight of the machine approx: 2, 2 t Machine dimensions:

Condition: used, Year of construction: 1982, Technical details: Kfedovb A Uuepfx Affea table length: 2200 mm table width: 2500 mm table load: 16 t total power requirement: 6,5 kW feed speeds: 1,25 - 160 mm/min rapid traverse speed: 2000 mm/min longitudinal adjustment: 1500 mm weight of the machine ca.: 12 t dimensions of the machine ca.: 4,1 x 2,65 x 0,95 m

Condition: good (used), functionality: fully functional, Centerless Grinder BB10 Kedsxw Iqvspfx Affefa ground diameter: 3 - 100 mm grinding wheel dimensions (diameter x width): 500 x 200 mm feed wheel dimensions (diameter x width): 300 x 200 mm through-feed grinding without feed (maximum length): 320 mm plunge grinding (maximum length): 195 mm

Condition: excellent (used), I am selling this machine, connected, can be tested. Max. workpiece diameter ..... 1600 mm Kfodpfx Ajv Nqppeffea Module ..... 16 - Power of the main electric motor ..... 12 kW Dimensions l x w x h ..... 4300 x 2000 x 3170 mm Machine weight ..... 18500 kg Can send a video of the machine, via whatsapp.

Condition: excellent (used), functionality: fully functional, I am selling this machine, connected and can be tested. Can send a video of the machine via whatsapp. Swing diameter over bed: 1250 mm Kfedpfx Aov Nw D Heffja Swing diameter over slide: 940 mm Center distance: 5000 mm Spindle bore: 102 mm