Used Tos Kurim for sale (7,648)

Condition: like new (used), functionality: fully functional, Extra large steady rest rest for TOS Trencin / TRENS lathes SN50 and SN500. Clamping diameter 110-250 mm. Chjdpfx Abjw Sx Ens Tef

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 07-16 1990, travel distance X-axis: 2,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 800 mm, A machine in good condition, as shown in the pictures, manufactured in 1990 and equipped with NCT 90 control. It has been used very little and is being sold due to underutilization. The total weight of the machine is 33 tons. The machine is fully operational. Disassembly and transportation are the responsibility of the buyer. Chodpsw Sx Agjfx Ab Tsf

Condition: used, Year of construction: 1959, turning diameter over bed 380 mm turning diameter over slide rest 215 mm turning length 1000 mm Chjdpfx Abjvwgmas Tef weight of the machine ca. 1800 kg dimensions of the machine ca. 2,7 x 1,2 x 1 m The L&Z lathe is in good condition. Scope of delivery incl. extensive accessories and cabinets - 3-jaw chuck - 4-jaw face plate - steady rest

Year of construction: 1981, condition: ready for operation (used), Travel X/Y/Z/W: 1000mm/900mm/800mm/710mm, speed: 1400rpm, spindle diameter: 90mm, table dimensions: 1250mm/1250mm, max. table load: 3000kg, motor power: 7.5kW. X/Y dimensions: approx. 5500mm/7500mm, weight: approx. 11000kg, control: Newall DP700. Documentation available. Chsdpfx Abjt Hkh Ao Tjf

Condition: ready for operation (used), functionality: fully functional, cutting height (max.): 250 mm, overall weight: 7,500 kg, saw blade diameter: 400 mm, cutting width (max.): 450 mm, power: 0.004 kW (0.01 HP), Two-shaft multi-saw 2x110 kW TOS SVITAVY PWR 422 - Czech production - twin-shaft - DTR documentation TECHNICAL DATA: - max cutting height: 250mm - track width: 450mm - shaft width: 450mm - disc bore diameter: 80mm - shaft diameter: 60mm - min disc diameter: 300mm - max disc diameter: 400mm - max width of input material: 860mm - min length of processed material: 1500mm * From above: - Rejectors: + - Drawing shaft, metal pneumatically pressed: + - rejects: + - drawing shaft, metal, pneumatically pressed: + - pressure: + - saw shaft: + - pressure: + - 2 pulling shafts, metal pneumatically pressed: + * Bottom: - metal roller, sliding: + - guide: + - rejects: + - track: + - saw shaft: + - track: + - infinitely adjustable feed speed on inverter: 4-40m/min - main motors: 2x110kW - feed motor: about 3kW - electric lifting of the body up/down: 0,55kW - electric adjustment of saw shafts: 2×0.18kW - central lubrication - diameter of the extraction stub: 2x300mm - dimensions L/W/H: 3400x2650x2200mm - weight approx: 7500kg Cjdpfx Ajri Nvvjb Tjhf

Condition: ready for operation (used), Year of construction: 2001, CNC milling machine TOS TV-1000 A CONTUR Manufacturer: Trens Model: MC 100 VA Year of construction: 2001 Condition: used Control unit: Heidenhain TNC 426 Chjdpfxjhlp Iws Ab Tsf X-axis travel: 1000mm Y-axis travel: 600mm Z-axis travel: 760mm Table length: 1080mm Table width: 580mm Tool changer with 40 positions Tool holder according to ISO 40 Spindle speed: 8000 rpm Overall dimensions: L 3200 x W 2100 x H 2900 mm Weight: 6200 kg Shipping possible throughout Germany and Austria. Surcharge 1000 € Sale excluding warranty.

Condition: good (used), functionality: fully functional, turning diameter: 655 mm, turning diameter over bed slide: 655 mm, turning length: 5,000 mm, Swing diameter over bed 655 mm Swing diameter over support 390 mm Cedpsw N D T Sjfx Ab Tjhf Turning length 5000 mm Spindle bore 82 mm Spindle speed 9-1120 rpm Feed rate 0.049-3 mm/rev Total connected load 12 kW

Condition: excellent (used), feed length X-axis: 450 mm, feed length Y-axis: 300 mm, feed length Z-axis: 300 mm, CNC TOS INTOS ZEBRAK FNG30 milling machine TNC310 Heidenhain control X450mm Y300mm Z300mm tool clamping hydraulic inverter on spindle SK40 machine in very good condition Chedpfx Abjrq D Uks Tjf

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, turning diameter over cross slide: 520 mm, spindle bore: 71 mm, turning diameter: 800 mm, turning length: 3,000 mm, Swing diameter over bed 800 mm, over support 520 mm Distance between centers 3000 mm Spindle nose size 8, spindle bore 71 mm Speed range 11.2 – 1800 rpm Feed range 0.06 – 13 mm/rev Metric thread pitch 0.5 – 160 mm Tailstock quill travel 210 mm, mounting MK 6 Main drive 15 kW incl. rapid traverse, fixed steady rest with roller heads Quick-change tool holder Drehblitz with 2 cassettes, Taper turning attachment, HS reducing sleeve 3-axis digital readout Heidenhain ND 970 3-jaw chuck D 315 TOS, manual Codsw Nvzzjpfx Ab Tshf

Year of construction: 1989, condition: ready for operation (used), Two similar TOS CNC bench drilling machines (built in 1986 and 1989) with the same parameters are available. Travel X/Y/Z/W: 1200mm/1100mm/1000mm/600mm, spindle diameter: 100mm, tool holder: ISO 50, max. table load: 3000kg, table: rotary table, accuracy X/Y/Z: +/-0.02mm, control: Heidenhain TNC 135, including various angles, cutter heads, milling cutters, tool holders and other items. Documentation available. On-site inspection is possible. Individual sale possible. Chedpfx Asvyr I Iob Tsf

Year of construction: 1965, condition: used, grinding diameter 630 mm grinding length 4000 mm centre height 335 mm total power requirement 28 kW weight of the machine ca. 15 t dimensions of the machine ca. m Codougnn Sspfx Ab Tjhf

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 150150900039, center width: 1,500 mm, overall weight: 2,820 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area Centre distance: 1,500 mm Chedpjw Hwurefx Ab Tsf MACHINE DETAILS Weight: 2,820 kg EQUIPMENT various lathe chucks

Condition: used, functionality: fully functional, turning diameter: 500 mm, turning diameter over bed slide: 500 mm, turning length: 2,000 mm, SUI 50/2000 – swing diameter 500 mm, turning length 2000 mm Codpfxow N D Tro Ab Tjhf

Condition: used, Year of construction: 1985, functionality: fully functional, travel distance X-axis: 4,700 mm, travel distance Y-axis: 2,250 mm, travel distance Z-axis: 1,300 mm, total width: 3,000 mm, total length: 8,710 mm, total height: 5,250 mm, spindle diameter: 130 mm, table load: 16,000 kg, table length: 2,200 mm, table width: 2,200 mm, overall weight: 40,000 kg, Accessories: Chjdpfx Aow Hr Hpsb Tjf 2 different heads 1 faceplate

Condition: new, Year of construction: 2025, functionality: fully functional, Swing dia over bed 500 mm Swing dia over cross slide 270 mm Swing dia in bridge 700 mm Length of bridge 357 mm Center high 250 mm Center distance 1000 mm Width of bed 340 mm Max weigth of wpc. 300 kgs Spindle speed 22 – 2000 rpm Spindle hole D53 mm Spindle power 5,5 kW Weight ca.1950 kgs Dimensions LxWxH = 2550 x 1100 x 1500 mm Accessories and features - 3 axis D.R.O. - Chuck protection - 3 jaws chuck D250 mm - 4 jaws chuck D300 mm - Tool holder protection - Stopper for long. slide - Steady rest - Travelling rest - Center Chodpfx Abjwwt I Ne Tsf - Reduction adapter for main spindle - Tailstock - Coolant unit - 4-fold toolholder - Machine lamp - Rapid speed on long, and cross slides - CE marking - Manuals

Year of construction: 2001, condition: ready for operation (used), Distance between centers: 3000mm, swing over bed/cross slide/in bed gap: 630mm/350mm/880mm, spindle bore: 77mm, speed: 1600rpm, power: 7.5kW, tailstock: MT5, quill stroke: 250mm. Machine dimensions X/Y/Z: approx. 5050mm/1300mm/1450mm, weight: approx. 3500kg. Includes three-jaw chuck, fixed and travelling steadies, as well as a quick-change tool holder. An on-site inspection is possible. Cedpfxjw Nq R Ro Ab Tjhf

Condition: refurbished (used), PORTAL PLANNING MACHINE TOS LENGTH 3000mm Chjdpfxjfmn Txe Ab Tof

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 34 63 20 96 006, turning diameter over cross slide: 390 mm, spindle bore: 80 mm, turning diameter over bed slide: 500 mm, spindle speed (max.): 1,800 rpm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely pickup between 28/07/2025 and 31/07/2025. TECHNICAL DETAILS Swing over bed: 500 mm Chsdpewvhxgjfx Ab Tsf Swing over support: 390 mm Distance between centers: 1,800 mm Spindle bore: 80 mm Max. speed range: 18 – 1,800 rpm MACHINE DETAILS Dimensions: 4,000 x 1,800 x 1,900 mm Weight: 5,200 kg EQUIPMENT - SONY digital display - Faceplate (diameter: 500 mm) - 2 steadies

Condition: good (used), Year of construction: 2015, Metal cutting Tooling TOS - HUR 50 MACH-ID 2923 Make: TOS Type: HUR 50 Year: 2015 Chodpfx Aswvht Rsb Tof

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 215 mm, turning length: 1,250 mm, turning diameter: 380 mm, weight of the machine ca. 1800 kg dimensions of the machine ca. 2,7 x 1,2 x 1 m The lathe is in good condition seccond lathe SV18RA was purchased 10 years ago afte complete refurbish including digital measuring accesories uppon request Csdpou R R I Sefx Ab Tehf offer valid for 2 machines with complete accesories, including dismantling and loading.

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck -Manufacturer: TOS, three-jaw chuck chuck size Ø 125 mm -Passage: Ø 35 mm Csdpfx Aswucf Sjb Tehf -Bolt circle: Ø 108 mm -Accessories: incl. 2nd set of interchangeable jaws -Dimensions: Ø125 x 70 mm -Weight: 4.1 kg

Year of construction: 1979, condition: ready for operation (used), Centre width: 2000mm, centre height: 315mm, turning diameter over bed/cross slide: 630mm/340mm, spindle bore: 80mm, speed: 1000rpm. Machine dimensions X/Y/Z: approx. 5000mm/1600mm/1600mm, weight: approx. 3200kg. An on-site inspection is possible. Cjdpsw Duuwofx Ab Tohf

Year of construction: 1969, condition: refurbished (used), BORING TOS TYP: 100A YEAR 1969 Chedohiarqepfx Ab Tjf

Condition: excellent (used), functionality: fully functional, turning diameter: 1,000 mm, turning length: 8,000 mm, total length: 10,500 mm, For sale is a used lathe from the Czech manufacturer TOS, model SU 100, with extensive equipment as shown in the photos. Technical specifications: Chedpfxov Epk Ds Ab Tsf Turning diameter over bed: 1,000 mm Turning length: 8,000 mm Extensive equipment as shown in the photos: 1 x 4-jaw chuck 2 x steady rest 1 x travelling steady

Condition: refurbished (used), Year of construction: 2000, I sell the top + bottom thicknessing machine TOS Svitavy F2T 80 Max. working width 800mm Max. working height 200mm Spindle 4-knives 800x125mm 1+1 top pressure rollers with anti kickback device. 2 bottom rollers in table for better feeding of wet or heavy parts Possibility of setting up the height of the bottom rollers each separately. Working thickness adjustment motorical with mechanical readout. Codew Andcspfx Ab Tehf Possibility of sensitive setting up the working height mechanically with manual wheel. Total weight 1000kg ! Machine in stock in Kežmarok, Slovakia, possibility to test.