Lead/traction spindle lathe

TOS SU 50 A 1500

Condition: ready for operation (used), Erfurt Trimming press PKZe 500/1000 Power 500 to Table dimension 1020x1420 mm Lrjdpfx Aisvbcxteijn Stroke 400 mm No of strokes / min - 12 Main motor 41kw Movie available

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15 - 90 U/min total power requirement 3,0 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Electro-pneumatic, vertical, linear-guided automatic saw for use of HSS saw blades to make series cuts from 60° left to 45° right steel. Ljdpfxefg Rlco Aiijrn The machine also works in semi-automatic cycle. CNC machine with multiprocessor and two with MEP control, latest generation controlled axes that make it possible to achieve 1000 with the same material thickness different cutting programs, each with a different cutting length and number of pieces program.

Condition: excellent (used), Year of construction: 2006, FAMUP MCP 45 CNC machining center TECHNICAL DATA axes Number of axes: 3 X-axis: 450 mm Y-axis: 300 mm Z-axis: 400 mm Feed rate Work feed X,Y,Z: 10`000 mm/min Rapid feed X,Y,Z: 30`000 mm/min Working pressure force X,Y: 2000 N Lrjdpeq U Rm Hefx Aiijn Working pressure force Z: 3300 N Pallet Dimensions: 400 x 300 mm Number of grooves: 2 Groove width: 14 mm Groove spacing: 80 mm Max. Table load: 100 kg Changeover time: 9 sec. Spindle Spindle motor power: 5 kW Speed: 10`000 rpm Tool changer Magazine slots: 16 Max. Tool diameter: 63 mm Max. Tool length: 150 mm Max. Tool weight: 4 kg Tool change time: 1.7 sec Weight: Approx. 3000 kg No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: good (used), Year of construction: 1992, Indoor crane, crane, electric wire rope hoist, hoist, motor winch, motor winch, tackle, traction winch, block and tackle -Manufacturer: steel, crane chassis with electric cable pull Lodsl Tuvdopfx Aiiern -Crane chassis: Type GO 24 20 16 -Traveling speed: 20 m/min -Roller pitch: 800mm -Cable: Type AS 2010 -Traction: 1000 kg / load capacity 4000 kg -Drum speed: 16 m/min / stroke 4 m/min -Lifting height: mm -Transport dimension: 1250/1180/H400 mm -Own weight: 356 kg

Condition: used, CNC cycle-controlled turning machine HARRISON, Type Alpha 400 Plus Machine No. P30180/150 Year of manufacture 1998 Center distance 1250 mm Turning diameter over bed 400 mm Center height 200 mm Turning diameter over cross slide 245 mm Diameter in the crotch 585 mm Bed width 313 mm Cross travel (X-axis) 250 mm Tailstock quill diameter 73 mm Tailstock quill stroke 140 mm Tailstock quill taper MK 5 Spindle bore 54 mm Spindle head size Camlock D1 Size 6 Spindle speed 20-2500 rpm Lrjdpfxjh Hvk Ae Aiion Spindle speed range (Stage 1) 15-275 rpm Spindle speed range (Stage 2) 35-795 rpm Spindle speed range (Stage 3) 110-2500 rpm Feed rate X and Z 0.03 - 0.6 mm/rev Rapid traverse rate X-axis max. 2000 mm/min Rapid traverse rate Z-axis max. 4000 mm/min Threading function Metric / Inch / Diametral / Module Spindle drive power 7.5 KW Power connection 400 Volt, 50 Hz, 23.5 kVA - Cycle control Harrison Alpha / GE FANUC - Language in French (France) - Automatic gear range selection in 3 stages (15-275, 35-795, 110-2500 rpm) - Electronic handwheels with different gear ratios (1/10/100) - 3-jaw scroll chuck FORKARDT Ø 250 mm Type CSN, 1 set of soft jaws - Quick-change tool holder MULTIFIX Size B with 2 inserts - 1 live center - 1 quick-change drill chuck RÖHM, 3-16 mm - Folding chuck guard - Folding work area safety doors - Chip tray with coolant system under the machine bed - Control cabinet fixed to the machine - RS 232 interface Space requirement L x W x H 2600 x 1450 x 1550 mm Weight 1950 kg Good condition

Condition: new, Model Name Shark 332-1 CCS Lrsdpsgvquwjfx Aiisn

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, pressure:63 t throat:250 mm stroke:8 - 100 mm no. of strokes:120 Hub/min table::715 x 500 mm dayligth:330 mm ram adjustment:63 mm clamping plate:700 x 480 mm hole in the table:240 mm Hole in clamping plate:110 mm dimension of ram:450 x 280 mm weight of the machine ca.:5,5 t dimensions of the machine ca.:1,2 x 1,7 x 2,7 m hydraulic tilting single column eccentric press, tilting in 4 steps, opening to rear (325 x 500mm) and below (360x160mm) with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot-trip operation possible, operating-mode selector for adjustment of continuous or single stroke, emergency cut-off, piece counter, Lrsdpfsfx Hv Hex Aiien various accessories

Condition: new, welding current max. 300 A open-circuit voltage 55 - 76 V connected load frequency 400 V weight 75 kg Dimensions (LxWxH) 950 x 560 x 880 mm Inert gas welding machine: - with pulse function - 300 amps Lrsdpfx Aju Aw Shjiijn - 400 volts - hose package 3m. - ground cable - Wire feed rolls for 0.8 - 0.9 - 1.0 - 1.2 - 2.5 - 3.2 - 4.0 and 5.0mm

Year of construction: 1978, condition: used, machine/vehicle number: 068242, Cup wheel diameter: 175 x 60 x 51 mm or 125 x 40 x 51 mm 2 grinding wheel speeds: 1450/2900 rpm Table size: AT-F 205 x 345 mm Space required: 1070 x 650 x 1180 mm Lredpfx Aobx Elieiien Drive motor: 500 V (with 380 V, 1/3 power loss), accordingly 0.6 kW

Condition: used, Year of construction: 1995, TORNADO 200 year of manufacture 1995 GE FANUC Series O-T control system Maximum machining diameter: 254 mm Maximum turning length: 400 mm Axis travels X : 215 mm Z : 400 mm Maximum spindle speed: 3500 rpm Spindle motor power: 18.5 kW Lodpfsua Uyujx Aiiorn Konik Tool system : VDI 40 Tool head : 12 positions Dimensions of the machine length : 2455 mm width : 1420 mm weight : 3000 kg