Used Tos Galanta Suil 40 A for sale (65,128)

Condition: ready for operation (used), Year of construction: 2005, Immediately available from site: CNC Cylindrical Grinding Machine TOS HOL – MONTA Type UN 63 / 750 / 2000 Year of manufacture: 2005 CNC Control: Sinumerik 840 Di Centre height: 375 mm Grinding diameter: 750 mm Grinding length: 2000 mm Grinding wheel dimensions: 750 x 100 x 305 mm Swing diameter in open steady rest: 40 – 250 mm Hjdpfx Aoxldhmsfisfn Tailstock Morse taper: 6 Table swivelling: 4 degrees Workpiece spindle speed range: stepless, 1 – 50 rpm Grinding wheel speed: 20 – 33 m/sec Grinding spindle motor: 19 kW Total power requirement: 41 kW Workpiece diameter control Full enclosure Grinding mist extraction Weight: 20 t Complete accessories Price: EUR 28,500.— plus VAT, ex site

Condition: used, Technical details: Hfjdpfx Afsv Uzn Tjisn turning diameter over bed: 800 mm turning diameter over support: 530 mm centre distance: 1250 mm turning diameter in the gap: 900 mm center height over support: 530 mm turning length: 1800 mm center height over bed: 395 mm spindle bore: 82 mm revolution per minute: max.900 U/min force of feed longitudinal: 25000 N bed width: 710 mm weight of the machine ca.: 6,5 t dimensions L x W x H: 4,01 x1,9 x 1,52 m Lathe chuck with 500mm 3-jaws/soft jaws Longitudinal feed in steps of 60 Thread feed metric/inch/pitch thread Tool holder MK6 Accessories: Steady rest diameter 500mmm closed Steady rest diameter 300mmm closed without attachment Multifix mountings *

Condition: good (used), Year of construction: 2004, Ref. -No.: 10520 Manufacturer: TOS VARNSDORF Type: WHNQ 13 CNC Year of construction: 2004 Type of control: CNC Control: HEIDENHAIN TNC 430 Storage location: Halberstadt Country of origin: Czech Republic Machine-No.: 23XX X-Travel: 3500 mm Y-Travel: 2500 mm Z-Travel: 1250 mm W-Axis: 800 mm Table Load: 12.500 kg Clamping Area: 1800 x 2500 mm Tool Taper: SK 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 3.000 RPM Max. Torque: 3323 Nm Rapid Travel X/Y/Z: 10000 mm / min Drive Capacity - Spindle Motor: 37 / 1500 kW Weight Of The Machine Ca.: 40 t Further information: - Tools + accessories - Angle head - Angle up to 2.5m - Chip conveyor - 3D measuring probe - Clamping device Hfjdjw Nmw Hopfx Afisn Machine is still in production and can be inspected under power by arrangement.

Condition: like new (used), Year of construction: 1984, functionality: fully functional, workpiece weight (max.): 300 kg, grinding length: 1,500 mm, grinding diameter: 320 mm, Cylindrical grinding machine TOS BHU 32A/1500, grinding diameter 320 mm, grinding length 1,500 mm, after our complete overhaul in 2016, in perfect technical and visual condition. Hedpfx Asxf Hniefiofn

Condition: excellent (used), TOS-TRENCIN SV 18 RA – Lead and Feed Screw Lathe For sale is a lead and feed screw lathe from the manufacturer TOS-TRENCIN, model SV 18 RA. The machine is in perfect condition and comes from the R&D department of a former VEB in Neubrandenburg (never used in production). ——— Technical Specifications • Swing over bed: 360 mm • Swing over cross slide: 215 mm • Turning length: 1,050 mm • Spindle bore: 40 mm • Distance between centers: 900 mm • Speed range: 14–2,800 rpm (21 steps) • Center height: 180 mm • Total connected load: 6.5 kW • Machine weight: approx. 1.9 t • Footprint (L×W×H): approx. 2.9 × 1.0 × 1.2 m ——— The machine is immediately ready for operation. • Inspection possible at any time • Loading and shipping can be arranged without issue ——— Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices are net, plus VAT. Subject to modifications and errors. Hfodpfx Afoxk Tyijion

Condition: excellent (used), CATALOG NO. 6650 TECHNICAL DATA - Max cutting height: 200 mm - Track width: 450 mm - Shaft width: 450 mm - Saw blade bore diameter: 80 mm - Shaft diameter: 60 mm - Min. blade diameter: 250 mm - Max. blade diameter: 350 mm - Max. timber width: 870 mm - Min. timber length: 1500 mm From above: - Pawls - Driven shaft, toothed, metal - Pawls - Driven shaft, toothed, metal - Pressure system - Saw shaft - 2 driven metal feed rollers, pneumatically pressed From below: - Guide rail - Metal sliding roller - Pawls - Track (caterpillar track) - Saw shaft - Track (caterpillar track) - Stepless feed speed control via inverter: 4–40 m/min - Main motors: 2 x 75 kW - Feed motor: 3 kW - Electric raising/lowering of frame: 0.55 kW - Electric adjustment of saw shafts: 2 × 0.25 kW - Central lubrication - Extraction outlet diameter: 2 x 300 mm - Dimensions (L/W/H): 3100 x 2600 x 2000 mm - Weight: approx. 6500 kg Included: - Centering device - Toothed feed rollers: 3 pcs - Smooth feed rollers: 8 pcs - Motor: 2 × 1.5 kW - Upper pneumatic pressure system Hfsdpfx Aslrvguofion - Side pressure system - Dimensions (L/W/H): 4850 / 1100 / 1800 mm - Weight: approx. 1000 kg ADVANTAGES – Manufactured in the Czech Republic – Two-shaft – Centering device – Operating & Maintenance Documentation (DTR) – Year of manufacture: 2010 – Used multi-blade saw, very good condition Net price: 262,900 PLN Net price: 61,860 EUR Net price calculated at an exchange rate of 4.25 PLN/EUR (price may change with significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 3520, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,300 mm, feed length W-axis: 800 mm, 1 BORING MACHINE TOS WHN 13 CNC TNC 355 Year 1994 W 800 . X 3500 . Y 2000 Z 1300 Complete machine Complete tooling Hsdew R Ag Hjpfx Afiefn

Year of construction: 1996, condition: ready for operation (used), Control Unit Brand HEIDENHAIN Hsdpfxoxfculo Afiefn Model TNC 426 Controller Brand Heidenhain Model TNC 426 P Main Drive Spindle speed range 0 – 2500 Tool taper ISO 50 Number of axis 5 Movement X-Axis Movement 3500 mm Y-Axis Movement 2000 mm Z-Axis Movement 1250 mm W-Axis Movement 800 mm Workpiece Workpiece weight 12000 kg This 5-axis TOS WHN 13.8 boring machine was manufactured in 1996. It features a working spindle diameter of 130 mm, X-axis travel of 3500 mm, Y-axis travel of 2000 mm, and a Z-axis travel of 1250 mm. The rotary table clamping surface measures 2200 x 1800 mm, supporting a maximum workpiece weight of 12,000 kg. If you are looking to get high-quality boring capabilities, consider the TOS WHN 13.8 machine we have for sale. Contact us for more information. Application Types Other Machine Tools

Condition: good (used), Year of construction: 2013, Ref. -No.: 10484 Manufacturer: TOS VARNSDORF Type: WHN 13 CNC Year of construction: 2013 Type of control: CNC Control: HEIDENHAIN 530 Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 3500 mm Y-Travel: 2000 mm Z-Travel: 1250 mm W-Axis: 800 mm B-Axis: 360 ° Table Load: 15.000 kg Tool Taper: SK 50 Turning Speeds: 1.400 RPM Spindle Speed: 2000 RPM Further information: The control system was converted to a HEIDENHAIN 530i in 2013. All drives were upgraded to digital. The thrust bearing tower was also replaced in 2013. Hedpfow Iu Nhox Afiefn Accessories: 3D probe - Heidenhain, large spindle support Additional table dimensions: 3850 x 900mm 1x axis module Heidenhain (overhauled), 1 new axis module is installed in the machine. Newly packed spare parts, covers from the machine. All bearings have been replaced by the machine in recent years. Tools and milling cutter heads are available. Machine is from 1st hand. The machine is still under power and in production. The machine can be viewed by appointment.

Condition: used, functionality: fully functional, wheel width: 800 mm, module 1-6 diameter max 600 mm digital readout Complete machine with documentation, tool holders, change gears, etc. Hodpfx Aexhck Sefiofn

Condition: excellent (used), Collet chuck Collet chuck SK 40 DIN 69871 Tightening thread M 16 Hsdpfxjlwqc Ej Afiefn Collet type OZ-467 E length 140 mm 10 pieces with set 150 Euro Single delivery 15 Euro

Condition: good (used), functionality: fully functional, Table dimensions: 830mm x 200mm Magnet dimensions: 600mm x 200mm Grinding wheel dimensions: 250mm Travel x: 720mm, y: 250mm, z: 320mm automatic feeds on x and y axes Hodpfoxg Td Tox Afisfn z-axis height electrically adjustable height: 1600mm x length: 1800mm x depth: 1500mm weight: 1700kg

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 07-14, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,300 mm, feed length W-axis: 800 mm, 1 TOS BORING MILL TYPE WHN13 8C CNC TNC 426 CB YEAR 1990 W800 .X3500 . Y2000 .Z1300 COMPLETE MACHINES, COMPLETE TOOLING Hedow R Akljpfx Afiofn

Condition: ready for operation (used), Year of construction: 2008, General Data Measurements width 4300 mm Measurements depth 3450 mm Measurements height 2265 mm Machine weight 5850 kg Workpiece Workpiece weight 20000 kg Additional Equipment Automatic setup for climb milling This 3-axis TOS FGS63T Plus was manufactured in 2008. It features a robust table clamping area of 630 x 1800 mm, a maximum spindle torque of 1600 Nm, and a spindle speed up to 2800 rpm. With a maximum workpiece weight capacity of 20,000 kg and automatic tool clamping, this vertical machining centre is ideal for heavy-duty milling. Consider the opportunity to buy this TOS FGS63T Plus vertical machining centre. Contact us for more information. Application Types Hedpfx Ajxfcm Uofiefn Milling

Condition: refurbished (used), battery capacity: 620 Ah, battery voltage: 80 V, total height: 784 mm, total length: 1,025 mm, total width: 708 mm, Tested forklift battery for your truck – 80V 4PZS 620Ah – DIN A + 1-year warranty + Complete with aquamatic system + Includes end discharge device & REMA 320 connector (other plug types can be installed upon request) + Capacity: minimum 90–100% (C5 capacity protocol is provided with delivery) + Year of manufacture: 2024 Dimensions: Length: 1,500 mm Width: 708 mm Height: 784 mm Weight: approx. 1,600 kg Suitable for the following models and more: Linde E 20 - 325-00 Linde E 20 / 600 - 387-00 Linde E 20 / 600 H - 1252-01 Linde E 20 / 600 H - 387-00 Linde E 20 / 600 RH - 387-00 Linde E 20 H - 387-00 Linde E 20 HOCH - 325-00 Linde E 20 HOCH - 336-00 Linde E 20 P - 325-00 Linde E 20 Z - 325-00 Linde E 25 - 325-00 Linde E 25 - 336-00 Linde E 25 - 387-00 Linde E 25 / 600 - 387-00 Linde E 25 / 600 H - 1252-01 Linde E 25 / 600 H - 387-00 Linde E 25 / 600 RH - 387-00 Linde E 25 CH - 387-00 Linde E 25 H - 387-00 Linde E 30 CH - 387-00 Linde E 30 H - 387-00 Linde E 30 P - 325-00 Linde E 30 SH - 1276-00 Linde E 35 - 337-00 Linde E 35 - 337- Linde E 35 P - 337-00 Linde E 40 P - 337-00 Linde K - 5231-00 Linde K - 5231-00 – side battery change Linde K 12 - Linde K 15 - Linde P 200 - 370-00 Linde P 250 - 127-00 – vertical battery change Linde P 250 S - 127-05 Linde P 250 SWB - 5007-10 – side battery change Linde P 250 SWB - 5007-10 – vertical battery change Still MX-X Still R. 07-25 Still R 60-20 Still R 60-22 Still R 60-25 Still RX 60-25 Still RX 60-30 Jungheinrich EFG 25 Jungheinrich EFG 425 Jungheinrich EFG 425 K Jungheinrich EFG V 25 Jungheinrich EKX 515 Jungheinrich EKX 515 K Jungheinrich EKX 525 K Jungheinrich ETX Toyota 7FBMF20 Toyota 7FBMF25 Toyota 8FBMKT25 Toyota 8FBMKT30 Toyota FBM25 Toyota FBMF20 Toyota FBMF25 Crown TSP 6000 - B Crown TSP 6000 - C Crown TSP 7000 Atlet EH 25 Balkancar EV715 Balkancar EV720 Clark GEX25 Heli CPD 30 Hjdewzvy Njpfx Afiofn Heli CPD 35 Hubtex MQ 40 Hyster E5XN Hyster J2.0 Hyundai 25BHA7 Mitsubishi FB25CN Nissan 1Q2L25Q Nissan QX25 Common battery sizes available on request. Transport available.

Condition: excellent (used), Year of construction: 1994, Machine in good working condition, including digital readout. Clamping table area mm 400 x 800 Working stroke: longitudinal mm 600 cross mm 400 vertical mm 400 Taper in spindle ISO 40 Range of revolutions r.p.m. 40 - 2000 Number of revolutions steps 18 Main motor output kW 3,0 Total machine input kVA 6,5 Machine dimensions mm 1675 x 1680 x 1740 Hjdpjxdxp Njfx Afiefn Machine weight kg 1725

Condition: as good as new (ex-display), Collet chuck SK 40, Hedpjlrt S Nofx Afisfn DIN 69871/OZ32 Collet type OZ32 467 E total length 190 mm parts are unused in opened original packing price per piece 12 pieces available weight per piece 2 kg

Condition: used, functionality: fully functional, Spindle: Speed range: 45 – 2800 rpm Spindle mount: 40 or Morse 4 Maximum spindle torque: 9000 kgcm Table: Clamping surface: 1250 x 250 mm Max. table load: 3200 kg Number of T-slots: 3 pcs, 14 mm wide Slot spacing: 55 mm Travels: Longitudinal: 810 mm Hodpfx Afoxg Icqsiefn Cross: 275 mm Vertical: 400 mm Automatic feeds: 14 – 900 mm/min Rapid traverse: up to 2800 mm/min Motors: Spindle motor: 4.2 kW Feed motor: 0.75 kW Other: Machine weight approx. 1800 kg Dimensions: length: 1900 mm, width: 1700 mm, height: 1700 mm

Year of construction: 2000, condition: repair required (used), functionality: not functional, Spare parts, service, and repairs for tool milling machines from the production of TOS, later INTOS Zebrak of the series FN 20/32/40, FNGJ 20/30/32/40/50, FNGP 40/50 Hodpexg H Hhefx Afiefn

Condition: excellent (used), Year of construction: 1998, CN Heidenhain TNC 430 PA Maximum spindle torque: 900 Nm Maximum feed force in the X, Y, Z axes: 25,000 N Maximum workpiece weight: 2,500 kg (at 1 m table length) Hfsdpfjxdwkfsx Afijn Table dimensions: 1,000 × 14,000 mm Number of T-slots in the table: 7 T-slot width × spacing: 22H7 × 140 mm Longitudinal travel (X): 12,000 mm Cross travel (Y): 1,000 mm Vertical travel (Z): 1,500 mm Horizontal spindle: Minimum distance between the horizontal spindle axis and table surface: 275 mm Maximum distance between the horizontal spindle axis and table surface: 1,775 mm Vertical spindle: Minimum distance between the vertical spindle face and the table: 50 mm Maximum distance between the vertical spindle face and the table: 1,550 mm Spindle taper: ISO 50 Spindle diameter: 85 mm Tool clamping force in the spindle: 16,500 N Main machine dimensions: Length: 17,850 mm Width: 5,640 mm Width with enclosure: 6,720 mm Height: 4,350 mm Floor space required: 73 m² Total machine weight: approx. 34,000 kg Electrical cabinet weight: approx. 820 kg Mains voltage: 50 V (3 × 400) Total machine power: 100 kVA Fuses to be provided by the customer outside the machine for 400 V Hydraulic unit weight without oil: 150 kg

Condition: refurbished (used), battery capacity: 775 Ah, battery voltage: 80 V, total height: 784 mm, total length: 1,024 mm, total width: 852 mm, Tested forklift battery for your truck - 80V 5PZS 775Ah - DIN A + 1 year warranty + Includes aquamatic watering system + Includes end cell connector & REMA 320 plug (other plugs can be installed on request) + Capacity: min. 90–100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,024 mm Width 852 mm Height 784 mm Weight: approx. 1,920 kg Suitable for the following models and others: Linde E25-325-00 Linde E25/600-336-00 Linde E25/600 HL-387-00 Linde E25/600 RHL-387-00 Linde E25/600 S -336-00 Linde E25 H-387-00 Linde E25 Hoch-336-00 Linde E25 SH-1276-00 Hfodpjwzvxrsfx Afijn Linde E30-325-00 Linde E30/600-336-00 Linde E30/600-RHL/HL-387-00 Linde E30/600 S-336-00 Linde E30 H-387-00 / Hoch Linde E30P -325-00 Linde E30 SH-1276-00 Linde E35/600H -388-00 Linde E35 H-/HL -387-00 Linde E35 P -337-00 Linde E35 RHL -387-00 Linde E35 SH-1276-00 Linde E40 -337-00 Linde E40 C -388-00 Linde E40 P -337-00 Linde E45/C/600H -388-00 Linde K 5231-00 / side shift Linde P250 -127-00 Linde P250L -127-05 Still R60-30 Still RX60-25/-30/-30L/-35/-40 Crown TSP 6000-C/-D Crown TSP 7000 Jungheinrich EFG 430 Jungheinrich EFG 530 Jungheinrich EFG 535 Jungheinrich EFG 540 Jungheinrich EFG 545 K Jungheinrich EFG 550S Jungheinrich EFG V25 Jungheinrich EKX 516 Toyota 7FBMF30/35 Toyota 8FBMKT20 Toyota 8FBMT25/30 Atlet EH20/25/30 Caterpillar EP30K/FB30/35KPAC Cesab B635A Cesab Blitz350 Clark GEX30 Daewoo B30-32X Daewoo B35X-5 Hubtex MQ Hyundai 30BHA-7 Magaziner EK1500/2000 Mitsubishi FB25N Mitsubishi FB30K PAC Mitsubishi FB35K Mitsubishi FB35N Nissan QX30 Steinbock-Boss PE30D TCM FHB25-E1L Yale ERP 30VL Standard battery sizes available on request. Transport possible.

Condition: excellent (used), TOS SVITAVY FWC 50.2 Planing width: 500 mm Max. planing height: 200 mm Lower cutterhead: 4 knives 5.5 kW motor Upper cutterhead: 7.5 kW Hfedpfew A I Iujx Afion Right spindle diameter: 40 mm 4 kW motor Left spindle diameter: 40 mm 4 kW motor Electric height adjustment

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 270 mm, spindle bore: 52 mm, turning diameter: 500 mm, spindle speed (max.): 1,000 rpm, rotational speed (max.): 2,200 rpm, rotational speed (min.): 22 rpm, overall weight: 1,940 kg, Refurbished Universal Centre Lathe SN 50 Classic-2000mm Main Features: Hodpfx Afoxghvwoiofn - Simple and ergonomic operation - Hand-scraped precision surfaces for high machining accuracy - Long service life - Low operating costs - Easy maintenance - Capability to cut various types of threads with a wide range of pitches Technical Specifications: Swing over bed: 500 mm Swing over cross slide: 270 mm Distance between centres: 2000 mm Spindle: Speed range: 22–2000 rpm Spindle bore: 52 mm Drive: Total power input: 6.6 kVA Main motor power: 5.5 kW Coolant pump power: 0.1 kW Rapid feed motor power: 0.55 kW Dimensions: Overall length: 3640 mm Width: 1100 mm Height: 1580 mm Weight: 1940 kg Standard Machine Equipment: CE version includes: 315 mm chuck guard with limit switch, front chip guard, rear movable guard, leadscrew cover Metric configuration Spindle nose: Bayonet B6 Spindle bore: Ø 52 mm Four-position tool post Electrical system for 3×400 V / 50 Hz (breaker version) Right-hand carriage control Bed gap for increased swing (Ø 700 mm over 230 mm length from spindle nose) Rapid feed Tailstock Main drive motor: 5.5 kW Chip tray and coolant system LED work light Foldable handles for X and Z axes Colour: RAL 7035-3 / 7016-3 / 6153 Thread cutting gear set Shear pins (3 pcs) Printed user manual

Condition: excellent (used), Year of construction: 2000, turning height: 1,250 mm, workpiece weight (max.): 8,000 kg, turning diameter: 1,550 mm, faceplate diameter: 1,250 mm, type of input current: AC, rotational speed (max.): 200 rpm, spindle speed (min.): 3,000 rpm, year of last overhaul: 2000, Equipment: rotational speed infinitely variable, Dimensions and weight Weight approx.: 25000 kg Dimensions (l x w x h) approx.: 4300 x 3300 x 3900 mm Machine description Vertical borer table diameter 1250 mm, 200 rpm, main motor 40 kW max turning diameter 1550 mm max turning height 1245 mm work load 8000 kg CNC SIEMENS 840D Hjdogaw Ryopfx Afiefn hydraulic clamping c-axis life spindle, 3000 rpm, 15 kW, inner cooling, ISO 50 Coolant system ATC Revolver 8 tools Machine was revised in 2000 by Feichter Milling and drilling heads are not available, can be purchased from TOS Hulin We have available similar size Schiess DK1250 CNC carrousel, overhauled in 2021 at 59.000 EUR.

Condition: excellent (used), CATALOGUE NUMBER 7244 TECHNICAL DATA - max. width of the processed element 800mm - max. thickness of the processed element 160mm from above: - smooth sliding roller Hjdpjrfb Nvofx Afijfn - pawls - pulling shaft, toothed, divided (segmented, sequential) allows simultaneous planing of several elements - 2 rows of pressure - pulling shaft, toothed, divided (segmented, sequential) - pressure - planing shaft 810mm, 4 knives, 18.5kW - pressure - pulling shaft smooth, metal from below: - adjustable preliminary table with sliding roller - sliding roller - planing shaft 810mm, 4 knives, approx. 10kW - 2 pulling rollers, smooth, metal, adjustable - metal roller, sliding - electric lifting of the table top - smooth regulation of the feed speed 7-40m/min - engine approx. 2.2kW - diameter of the exhaust port 200mm, 180mm - dimensions length/width/height 1950x2100x1700mm - weight approx. 2500kg - Czech production - very good condition, - used planer Net price: PLN 34,900 Net price: EUR 8,200 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)