Used Tos Fngj 20 for sale (91,270)

Condition: excellent (used), Year of construction: 2005, table load: 15,000 kg, rotary table diameter: 1,600 mm, Specification Dimension of bed – width 1170 mm height 290 mm length 2000 mm Dimension of slide - width x length (with no extensions) 1340 x 1300 mm height over the sliding surface 320 mm Length of travel along the „W“ axis 500 mm Rotary table surface clamping dimensions Ø 1500 mm Centering hole 100 H7 mm Height of the rotary table from the sliding surface 590 mm Number of clamping slots 9 Size of clamping T-slots. 22H7 Spacing of the T-slots 160 mm Speed of rotation smoothly controllable within the limits 1 ÷720 °/min Maximum centric load on the rotary table due to the workpiece mass 15000 kg Maximum eccentric load on the rotary table due to the workpiece weight (up to 750 mm distance of the workpiece center of gravity from the rotary table axis) 5000 kg Maximum rotary table bearing capacity – centre of gravity from table axis 500 mm Maximum torque on rotation 15000 Nm Maximum torque on stiffening 10000 Nm Maximum tilting moment to a plane perpendicular to clamping surface 15000 Nm Total time required for the table turning cycle through 360° 30 sec Working feed along the W-axis 1÷5000 mm.min-1 Fast feed along the W-axis 5000 mm.min-1 Oil working pressure (table stiffening) 5 MPa (drive pre-stressing) - MPa Hfsdjw Uz S Aepfx Afijn Table positioning accuracy Rotation Bilateral accuracy of the A-position setting by the ISO 230-2 16 µm Unilateral repeatability of the R-position setting by the ISO 230-2 8 µm Linear axis Bilateral accuracy of the A-position setting by the ISO 230-2 0,02 µm Unilateral repeatability of the R-position setting by the ISO 230-2 0,01 µm Table turning part peripheral accuracy ±0,01 mm

Condition: reconditioned (used), Year of construction: 1994, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, torque: 1,200 Nm, controller manufacturer: Heidenhain iTNC 426, workpiece weight (max.): 9,000 kg, total height: 3,320 mm, total length: 9,660 mm, total width: 4,918 mm, spindle speed (min.): 11 rpm, spindle speed (max.): 2,500 rpm, The machine is currently disassembled and is undergoing refurbishment with the following scope of work: - Complete disassembly and cleaning - Inspection of all components - New Tribotec lubrication unit - Overhaul of the dedicated console balancing circuit Hedpfsxnkkasx Afiefn - Milling head “O” – complete overhaul including replacement of gears - Replacement of the gearbox bearings - Replacement of belts - Repair of ball screws and their bearings - Resealing of the machine’s hydraulic circuits and replacement of solenoid valves - Addition of automatic gear lubrication in the milling head - Resealing of all hydraulic cylinders and modernization of seals - Overhaul of the hydraulic power unit - Overhaul of Indramat feed motors and the spindle motor - Repair and adjustment of Indramat drives - Overhaul of the electrical cabinet including control elements - Replacement and modernization of limit switches throughout the machine - Repair or replacement of Heidenhain system cables and TNC 426 - Overhaul of the control panel - Overhaul of the Heidenhain TNC 426 control system, including keyboard and display unit - The machine will be fully functional and delivered with geometric accuracy documented by protocol - New machine paint in RAL 5005 and RAL 9010 color scheme. Technical Data Maximum spindle torque: 1,200 Nm Maximum feed force in X, Y, Z axes: 20,000 N Maximum workpiece weight: 9,000 kg Total table area: 1,000 x 4,000 mm Number of T-slots/table pitch: 7/140 mm Slot width: 24H7 mm Table height from base: 900 mm Longitudinal travel (X): 4,000 mm Cross travel (Y): 1,000 mm Vertical travel (Z): 900 mm Minimum distance from horizontal spindle axis to table clamping surface: 150 mm Maximum distance from horizontal spindle axis to table clamping surface: 1,500 mm Minimum distance from vertical spindle nose to table clamping surface: 130 mm Maximum distance from vertical spindle nose to table clamping surface: 1,030 mm Distance from horizontal spindle nose to inner table edge: 80 mm Distance from vertical spindle axis to inner table edge: 100 mm Spindle taper: ISO 50 Retraction force of clamping mechanism: 16,100 N Horizontal spindle swiveling – bilateral: 180° Vertical spindle swiveling – bilateral: 180° Spindle head positioning: adjustable in 2.5° increments Usable power of main drive motor: 22 kW Spindle speed range: 11 to 2,500 rpm Number of spindle speed steps: stepless Feed rate range: 1 to 5,000 mm/min Rapid traverse in Y, Z axes: 10 m/min Rapid traverse in X axis: 10 m/min Machine available for delivery at the end of 2025.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,120 mm, travel distance Z-axis: 900 mm, nominal power (apparent): 10 kVA, table width: 1,120 mm, table height: 1,120 mm, spindle speed (max.): 1,100 rpm, tool weight: 15,000 g, The machine is like new after a complete overhaul, 4-axis digital measurement Newall. Hsdpfev A Irhox Afiefn

Condition: excellent (used), Professional drill chuck with SK40 / ISO40 taper, compliant with DIN 69871 A standard. Manufacturer: EROGLU Präzisionswerkzeuge (Germany) – high-precision manufacturing. Model: 03180PB05553 (3/16-IK). Maximum tightening torque: 20 Nm – ideal for drilling and tapping with controlled force. Version with internal cooling (IK – Innenkühlung). Chuck with torque adjustment + / –, allowing protection of tools and workpieces. Solid and durable industrial design – suitable for use in CNC machining centers and conventional machines. Condition: used, in very good technical condition – ready for immediate use. ✅ German quality – precision industrial-grade drill chuck ✅ Ideal for production and workshop applications. Hfodpfxjxlcz Se Afisn

Condition: excellent (used), Trumpf CS 20 copier punch Manufacturer: Trumpf Type: CS 20 Control unit: conventional Incl. various accessories as per photos Year of construction: 10/1976 Weight: approx. 6000kg Complete documentation is available. Hfodpfx Afsvmrcrsion Inspection under power can be arranged at short notice. We are happy to answer any further questions you may have. Price, ex warehouse, plus VAT. Condition: good - ready for demonstration Delivery: ex warehouse - as viewed Payment: net - after receipt of invoice Subject to prior sale, errors excepted. We ask for your order. Other machines and systems available from stock - please enquire. We look forward to hearing from you.

Condition: ready for operation (used), Spindle bore: 60 mm Swing diameter over bed: 500 mm Center length: 1000 mm Dimensions: 3100x1400x1600mm Hfodpeiqtzkefx Afisn

Year of construction: 1990, condition: good (used), HEIDENHAIN TNC-355 Hfjdpjfg Ep Djfx Afion Working travels 850x500x450mm Table size 1250x500mm Spindle taper 50 Spindle speeds 35,5-1800 rpm Misc.accessories MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Swing dia over bed 400 mm Swing dia over crosss slide 220 mm Between centers 1500 mm Spindle hole 50 mm Spindle speed 12,5 – 3150 rpm Spindle power 5,5 kW Power required 16 kVA Dimensions L x W x H = 2900 x 1000 x 2200 mm Weight cca 1600 kgs Accessories, features - 3 jaws chuck, D200 mm chuck - 4-fold tool holder - Tailstock - Display motor load - Rapid speed Hedexiymtepfx Afijfn - Driwing system by clutch - Spindle break - Splash wall - Hardened and ground linear guides are in perfect condition - Steady rest - Coolant unit - Manual The machine is in great and original technical condition. It was barely used. No DRO system on it.

Condition: new, TECHNICAL DATA: - Base area: 4,000 x 5,000 mm [other options available] Hfodpexmkwwsfx Afion - Grid: 4,000 x 5,000 mm - Top edge of flooring: 3,340 mm - Clear internal height: 3,000 mm - Flooring: 38 mm chipboard, P6 raw/white - Load capacity: 250 kg - Colour: RAL of your choice - Condition: new Scope of delivery: - Columns - Primary and secondary beams - Bracing cross members - Flooring - Fastening material PRICES: Variant I: Base area: 20 m² | Size: 4,000 x 5,000 mm | €2,137.50 net, plus transport costs and VAT Variant II: Base area: 40 m² | Size: 4,000 x 10,000 mm | €3,979.30 net, plus transport costs and VAT Variant III: Base area: 40 m² | Size: 8,000 x 5,000 mm | €3,874.00 net, plus transport costs and VAT Variant IV: Base area: 60 m² | Size: 4,000 x 15,000 mm | €5,655.36 net, plus transport costs and VAT Variant V: Base area: 80 m² | Size: 4,000 x 20,000 mm | €7,445.76 net, plus transport costs and VAT Variant VI: Base area: 80 m² | Size: 8,000 x 10,000 mm | €6,986.24 net, plus transport costs and VAT Variant VII: Base area: 80 m² | Size: 16,000 x 5,000 mm | €7,061.76 net, plus transport costs and VAT Variant VIII: Base area: 120 m² | Size: 8,000 x 15,000 mm | €9,930.06 net, plus transport costs and VAT Variant IX: Base area: 120 m² | Size: 10,000 x 12,000 mm | €9,671.76 net, plus transport costs and VAT Variant X: Base area: 160 m² | Size: 8,000 x 20,000 mm | €13,063.67 net, plus transport costs and VAT Variant XI: Base area: 160 m² | Size: 16,000 x 10,000 mm | €12,880.98 net, plus transport costs and VAT Variant XII: Base area: 240 m² | Size: 16,000 x 15,000 mm | €18,258.52 net, plus transport costs and VAT Variant XIII: Base area: 320 m² | Size: 16,000 x 20,000 mm | €23,955.92 net, plus transport costs and VAT Optional accessories: - Guard railing - Flush wall connection - Staircase - Transfer station - Collision protection YOUR CONTACTS AT OUR COMPANY: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOMIZED DESIGN & MANUFACTURING This mezzanine system is an example from our standard range. Of course, we can design and manufacture your warehouse mezzanine exactly to your operational requirements – tailored to surface area, load capacity, installation height, and intended application. TRANSPORT & INSTALLATION We will gladly assist you with the transport and installation of the item. This product is available for collection. Delivery or shipping is available at an additional cost. The extra charges depend on the delivery location and shipment size; please contact us for an individual quote. TERMS OF PAYMENT Payment terms are to be agreed upon in the event of an order. All prices are per item/net, as specified in the description (plus VAT). You will, of course, receive an invoice showing VAT separately. ABOUT US The company DLK in Nordhorn deals with new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for trade, industry, and craftsmanship. ✅ Four successes – The four cornerstones of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: excellent (used), For sale: professional SK40 DIN 69871 AD/B tool holder with collet, ideal for use on CNC machining centers and milling machines. Designed for clamping milling cutters, drills, and other cutting tools. 📌 Specification: • Taper: SK40 DIN 69871 AD/B • Clamping range: Ø1–20 mm • Precision ER-type collets • Material: high-quality tool steel • Precision-machined for high rigidity and accuracy • Ideal for drilling, milling, and tapping ✅ Condition: used, in very good technical condition – ready for operation. ✅ Single pieces or larger quantities available for purchase. Hfsdpfxexla R Ro Afion

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 2,200 mm, table load: 15,000 kg, spindle diameter: 130 mm, spindle speed (max.): 3,000 rpm, table length: 2,500 mm, table width: 1,800 mm, spindle stroke: 800 mm, Tos Varnsdorf WHQ 13 CNC boring mill with: - X-axis travel 5000 mm - Y-axis (vertical) travel 3000 mm - Z-axis (cross) travel 2200 mm - W-axis (quill) travel 800 mm - rotary table size 2500 x 1800 mm - Heidenhain iTNC 530 CNC control - spindle speed 3000 rpm - 60-position tool magazine - high pressure through-spindle coolant - hinged belt chip conveyor - standard accessories included Hfedpfx Aowtmvxefijn - year of manufacture 2012 - year of installation 2017 0% financing over 12/24 months available

Year of construction: 2020, operating hours: 10,245 h, condition: ready for operation (used), Control Unit Brand HEIDENHAIN Model iTNC 640 Main Drive Number of axis 4 Hfjdpfxjxirlzo Afisn Movement X-Axis Movement 1250 mm Y-Axis Movement 1100 mm Z-Axis Movement 940 mm W-Axis Movement 710 mm Workpiece Workpiece weight 3000 kg This 4-axis TOS Varnsdorf WHQ 10 CNC boring machine was manufactured in 2020. It features a spindle diameter of 100 mm, ISO 50 taper, and spindle speeds up to 2500 rpm. The table can handle weights up to 3000 kg and includes a 40-position tool changer. Currently operational, though "Y" axis calibration is needed. Consider the opportunity to buy this TOS Varnsdorf WHQ 10 CNC boring machine. Contact us for more information about this machine. Application Types Other Machine Tools

Condition: good (used), Year of construction: 1981, Max. module 16 Min. module 4 Max. wheel diameter 1600 mm Mon. wheel diameter 800 mm Table load 700 kg Machine weight 19 t Dimensions L x W x H 4300 x 2000 x 3170 Hodpfxov Urtts Afijfn

Year of construction: 2025, condition: new, functionality: fully functional, The universal laser marking system LAS 28 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes a laptop incl. holder with Windows operating system. Optionally, the laser model LAS 28 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, can be realized. Made in Germany Hfsdpfxsv Sybyo Afien - Fiber laser 20W (Optional: 30W, 50W) - Wavelength 1064nm - marking field size 150x150mm (optional: 200x200) - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: Autofocus system - signal light for indication of operating status - marking software EZCAD (optional additional laser software) - Pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. part height approx. 270mm - electrically adjustable Z-axis (adjustment of working plane) - frame made of aluminum profile - connection 230V - air cooled - Laptop with Windows operating system - dimensions: 800x 600 x 1660mm (LxWxH) - weight: approx. 80 Kg

Condition: new, TECHNICAL DATA: - Base area: 4,000 x 5,000 mm [other configurations available] - Grid: 4,000 x 5,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm - Floor covering: 38 mm chipboard P6 raw/white - Load capacity: 250 kg - Colour: RAL of your choice - Condition: new Scope of delivery: - Columns/supports - Main and secondary beams - Bracing crosses - Floor covering - Fastening material PRICES: Variant I: Base area: 20 m² | Dimensions: 4,000 x 5,000 mm | €2,091.60 net, plus transport costs and VAT Variant II: Base area: 40 m² | Dimensions: 4,000 x 10,000 mm | €3,754.80 net, plus transport costs and VAT Variant III: Base area: 40 m² | Dimensions: 8,000 x 5,000 mm | €3,591.00 net, plus transport costs and VAT Variant IV: Base area: 60 m² | Dimensions: 4,000 x 15,000 mm | €5,395.00 net, plus transport costs and VAT Variant V: Base area: 80 m² | Dimensions: 4,000 x 20,000 mm | €6,825.00 net, plus transport costs and VAT Variant VI: Base area: 80 m² | Dimensions: 8,000 x 10,000 mm | €6,462.50 net, plus transport costs and VAT Variant VII: Base area: 80 m² | Dimensions: 16,000 x 5,000 mm | €6,552.50 net, plus transport costs and VAT Variant VIII: Base area: 120 m² | Dimensions: 8,000 x 15,000 mm | €9,238.00 net, plus transport costs and VAT Variant IX: Base area: 120 m² | Dimensions: 10,000 x 12,000 mm | €8,785.40 net, plus transport costs and VAT Variant X: Base area: 160 m² | Dimensions: 8,000 x 20,000 mm | €12,211.52 net, plus transport costs and VAT Variant XI: Base area: 160 m² | Dimensions: 16,000 x 10,000 mm | €12,040.40 net, plus transport costs and VAT Variant XII: Base area: 240 m² | Dimensions: 16,000 x 15,000 mm | €17,580.72 net, plus transport costs and VAT Variant XIII: Base area: 320 m² | Dimensions: 16,000 x 20,000 mm | €23,076.40 net, plus transport costs and VAT Optional accessories: - Railing - Flush wall connection - Staircase - Transfer station Hfedpsxmku Nsfx Afien - Impact protection YOUR CONTACTS AT OUR COMPANY: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOM DESIGN & MANUFACTURE TO YOUR SPECIFICATIONS This platform system is an example from our standard range. Of course, we also design and manufacture your storage platform precisely to your operational requirements – tailored to area, load capacity, installation height, and intended use. TRANSPORT & INSTALLATION We are pleased to assist you with transport and assembly. This item is available for collection. Delivery or shipping is available for an additional charge. Extra costs depend on the destination and scope of the shipment and can be individually requested from us. PAYMENT TERMS Payment terms are to be agreed upon in case of an order. The price is given per unit/net price or as described in the text (plus VAT). You will, of course, receive an invoice showing VAT. ABOUT US DLK in Nordhorn deals in new and used products in the areas of warehouse logistics, conveyor technology, warehouse platforms, textile storage, as well as machinery for trade, industry, and crafts. ✅ Four wins – the success building blocks of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: excellent (used), For sale: high-quality face mill with indexable inserts ASF-35-45-20 mounted on an SK40 arbor. A professional tool for roughing and finishing operations, ideal for use in CNC machining centers and conventional milling machines. The cutter head's 45° approach angle ensures excellent cutting performance, longer insert life, and a smooth surface finish on the workpiece. • Type: face mill with indexable inserts • Model: ASF-35-45-20 • Mounting: SK40 / DIN 69871 • Approach angle: 45° • Number of insert seats: approx. 6–8 • Application: milling of steel, cast iron, stainless steel, and other structural materials • Condition: used – very good, ready for operation Hfedpexk T Igsfx Afijn

Condition: good (used), Year of construction: 2003, Ref. -No.: 10603 Manufacturer: TOS Type: WRD 1500 Year of construction: 2003 Type of control: CNC Control: Heidenhain TNC 430 Storage location: Halberstadt Country of origin: Tschechien X-Travel: 10000 mm Y-Travel: 4000 mm Z-Travel: 1000 mm W-Axis: 800 mm V-axis travel: 2000 mm Spindle Diameter: 150 mm Max. Workpiece Weight: 25000 kg Tool Taper: ISO 50 DIN 68971 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Turning Speed - Stepless: 10 - 2500 RPM Feed Speeds X/Y/Z Axis: 1 - 8000 mm / min Drive Capacity - Spindle Motor: 60 kW Total Power Requirement: ca. 80 kW Hsdpfjxhbt Sjx Afijfn Internal cooling: 20 bar Rotary table diameter: 2500 x 3000 mm Support sleeve dimensions: 450 x 450 mm Rapid traverses Z + W: 12000 mm / min

Condition: ready for operation (used), Max. grinding length: 1000mm Max. grinding diameter: 320mm Hodpfxjxl Rumo Afiefn

Condition: used, Year of construction: 1957, Module 6 Hsdpfx Afov Dwg Dsisfn Wheel diameter 600 mm

Condition: ready for operation (used), empty load weight: 1,700 kg, total length: 3,075 mm, total width: 1,100 mm, total height: 1,435 mm, Tos SN40C Ø400 x 1500 mm Hjdpexgv Hkefx Afijfn Distance between centers: 1500 mm Swing over bed: 400 mm Swing over cross-slide: 220 mm Swing in gap: 600 mm Diametre of main spindle bore: 52 mm Number of speeds: 45 - 2000 rpm

Condition: new, TECHNICAL DATA: - Footprint: 4,000 x 5,000 mm [other versions available] - Grid dimensions: 4,000 x 5,000 mm - Top edge of floor: 3,340 mm - Clear height: 3,000 mm - Floor covering: 38 mm P6 chipboard, untreated/white - Load capacity: 250 kg - Colour: RAL of your choice - Condition: new Scope of delivery: - Columns - Primary and secondary beams - Bracing crosses - Floor panels - Fastening material PRICES: Variant I: Footprint: 20 m² | Area: 4,000 x 5,000 mm | €2,013.00 net, plus transport costs and VAT. Variant II: Footprint: 40 m² | Area: 4,000 x 10,000 mm | €3,531.90 net, plus transport costs and VAT. Variant III: Footprint: 40 m² | Area: 8,000 x 5,000 mm | €3,448.94 net, plus transport costs and VAT. Variant IV: Footprint: 60 m² | Area: 4,000 x 15,000 mm | €5,047.20 net, plus transport costs and VAT. Variant V: Footprint: 80 m² | Area: 4,000 x 20,000 mm | €6,588.00 net, plus transport costs and VAT. Hsdpfoxmkuisx Afisfn Variant VI: Footprint: 80 m² | Area: 8,000 x 10,000 mm | €6,092.40 net, plus transport costs and VAT. Variant VII: Footprint: 80 m² | Area: 16,000 x 5,000 mm | €6,234.00 net, plus transport costs and VAT. Variant VIII: Footprint: 120 m² | Area: 8,000 x 15,000 mm | €8,676.54 net, plus transport costs and VAT. Variant IX: Footprint: 120 m² | Area: 10,000 x 12,000 mm | €8,092.44 net, plus transport costs and VAT. Variant X: Footprint: 160 m² | Area: 8,000 x 20,000 mm | €11,509.72 net, plus transport costs and VAT. Variant XI: Footprint: 160 m² | Area: 16,000 x 10,000 mm | €11,349.24 net, plus transport costs and VAT. Variant XII: Footprint: 240 m² | Area: 16,000 x 15,000 mm | €16,426.80 net, plus transport costs and VAT. Variant XIII: Footprint: 320 m² | Area: 16,000 x 20,000 mm | €21,339.63 net, plus transport costs and VAT. Further versions available. Optional accessories: - Safety railings - Flush wall connection - Staircase - Transfer platform - Collision protection ⚙️ CUSTOM DESIGN & MANUFACTURING This mezzanine system is an example from our standard range. Of course, we design and manufacture your storage platform precisely according to your operational requirements – tailored to area, load capacity, construction height and intended area of use. TRANSPORT & ASSEMBLY We would be glad to assist you with the transport and assembly of the goods. This item is available for collection. Delivery or shipment can be arranged at an additional cost. These costs depend on the delivery location and shipment volume and can be individually requested from us. PAYMENT TERMS Payment terms will be coordinated upon order placement. Price refers to unit price/net price, or as stated in the description (plus VAT). You will, of course, receive an invoice with VAT shown. ✅ Four winning factors – The success components of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: good (used), Year of construction: 2007, 1 used cylindrical grinding machine, manufacturer Tos BHU 25 Year of manufacture: 1984 / complete retrofit at Tos in 2007 Technical Specifications: Center distance: 600 mm Swing diameter: 280 mm Hedpfx Afjxgbbgsiofn Max. longitudinal travel: 600 mm Max. transverse travel: 245 mm Grinding wheel: Diameter: 400 mm Width: 40 mm Bore: 127 mm Max. wheel width: 63 mm Max. workpiece weight between centers: 60 kg Grinding wheel speed: Number of steps: 2 From: 1570 rpm To: 2050 rpm Swiveling grinding head: +/-60° Workpiece headstock: Speeds: Number of steps: 12 From: 22 rpm To: 710 rpm Swivel range: 90° Spindle taper: 4 Morse taper Tailstock quill taper: 3 Morse taper Maximum table swivel: +/- 7° Electrical connection: 50 Hz 3-phase 380 Volt External grinding spindle motor: 4 kW Total power requirement: 8 kVA Machine weight approx.: 2500 kg Machine dimensions: Length: 1600 mm Width: 1400 mm Height: 1300 mm Various accessories: Tailstock with fine adjustment Coolant system Various grinding wheels with flange

Condition: used, Technical details: turning diameter over bed: 800 mm turning diameter over support: 530 mm centre distance: 1250 mm turning diameter in the gap: 900 mm center height over support: 530 mm turning length: 1800 mm center height over bed: 395 mm spindle bore: 82 mm revolution per minute: max.900 U/min force of feed longitudinal: 25000 N bed width: 710 mm weight of the machine ca.: 6,5 t Hodpfxev Uzn Tj Afijfn dimensions L x W x H: 4,01 x1,9 x 1,52 m Lathe chuck with 500mm 3-jaws/soft jaws Longitudinal feed in steps of 60 Thread feed metric/inch/pitch thread Tool holder MK6 Accessories: Steady rest diameter 500mmm closed Steady rest diameter 300mmm closed without attachment Multifix mountings *

Condition: good (used), Year of construction: 2004, Ref. -No.: 10520 Manufacturer: TOS VARNSDORF Type: WHNQ 13 CNC Year of construction: 2004 Type of control: CNC Control: HEIDENHAIN TNC 430 Storage location: Halberstadt Country of origin: Czech Republic Machine-No.: 23XX X-Travel: 3500 mm Y-Travel: 2500 mm Z-Travel: 1250 mm W-Axis: 800 mm Table Load: 12.500 kg Clamping Area: 1800 x 2500 mm Tool Taper: SK 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 3.000 RPM Max. Torque: 3323 Nm Rapid Travel X/Y/Z: 10000 mm / min Hodpjw Nmw Hsfx Afijfn Drive Capacity - Spindle Motor: 37 / 1500 kW Weight Of The Machine Ca.: 40 t Further information: - Tools + accessories - Angle head - Angle up to 2.5m - Chip conveyor - 3D measuring probe - Clamping device Machine is still in production and can be inspected under power by arrangement.

Condition: ready for operation (used), chuck outer diameter: 1,620 mm, total height: 4,650 mm, empty load weight: 20,000 kg, + zijsteun Elektrisch vernieuwd in 2007!!! Hfedsxgv Rcspfx Afion Max turningdia -- passage: 1700 mm Power on the spindle: 37 kW Max hight of workpiece Z-axis: 1290 mm Digital screen: Heidenhain 2 axes Number of speeds: 3,5 - 150 rpm Long: 4550 mm Wide: 2670 mm