Used Tos Fngj 20 for sale (29,111)

Condition: good (used), overall dimensions 2700x2400x2000 mm; bowl 200 ltr; power supply 400 V, 50 Hz; total power 66,15 kW, 133 A; 2 knives speeds 1500/3000 rpm, 60,2/45,6 kW; Ksdpfoq A T Ugjx Ad Nswt 2 bowl speeds; 1 mixing speed 130 rpm, 1,1 kW; loader; unloader; hydraulic system 0,75 kW; weight ±3700 kg.

Condition: like new (used), The ALTO SHAAM 1200-TH/III Deluxe Control Cook and Hold Oven is a versatile and reliable award-winning commercial oven, ideal for kitchens with limited space. The highly energy-efficient Halo Heat technology enables the unit to both cook and hold food—even overnight—while consuming significantly less energy than conventional cooking methods. Description Alto-Shaam 1200-TH-III Cooks by time or via a probe that detects the core temperature of the product, automatically switching from cook mode to hold mode once the set parameters are reached. Eight programmable menu buttons store favorite recipes in memory (settings for cook/hold/time/probe). This reduces operating requirements to simply loading the oven, pressing the power button, selecting the preset menu, and starting the cycle. When cooking with the probe, the oven records the highest and lowest temperatures detected by the food probe to ensure items are cooked to the required temperature. The oven includes the patented SureTemp heat recovery system, which provides instant compensation for any heat loss whenever the door is opened, and gives an audible alert if the door remains open for more than three minutes. Ksdpfx Asw Ehvded Njwt Clear, easy-to-read LED display. Stackable design for additional capacity. No oven hood, outside venting, or fire suppression system required (in most areas). Includes: - Core temperature probe, 6 racks, 2 internal drip pans, 1 external drip pan, 127 mm casters. Dimensions: 1924 (H) x 574 (W) x 819 (D) mm. Power: 230 V, 4.9 kW, 28.7 A. Weight: 156 kg.

Condition: used, Turning Length 1000 mm Swing over bed Ø500 mm Swing over cross slide Ø270 mm Swing in the gap Ø700 mm Gap length 230 mm Spindle bore 52 mm Spindle taper 5 Mt Speeds ranges 2750 Rpm 2 axis DRO Kjdpswtp Abefx Ad Njwt Coolant 4 tool holders 3 jaw chuck

Condition: ready for operation (used), chuck outer diameter: 1,620 mm, total height: 4,650 mm, empty load weight: 20,000 kg, + zijsteun Elektrisch vernieuwd in 2007!!! Max turningdia -- passage: 1700 mm Power on the spindle: 37 kW Kedpfx Ajycmpvod Nswt Max hight of workpiece Z-axis: 1290 mm Digital screen: Heidenhain 2 axes Number of speeds: 3,5 - 150 rpm Long: 4550 mm Wide: 2670 mm

Condition: used, total height: 1,600 mm, total length: 5,000 mm, total width: 1,600 mm, Empty weight: 3.190 kg Price: On request - Documentation available: No - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 315 - Swing over bed [mm]: 630 - Distance between centres [mm]: 3000 - Spindle bore [mm]: 80 - Min. spindle speed [rpm]: 10 - Max. spindle speed [rpm]: 1000 - Options: Digital readout, Removable bed - Swing over removable bed [mm]: 900 - Type of digital readout: 2 assen - Transport dimensions: 5000mm x 1600mm x 1600mm (l x w x h) - Transport weight [kg]: 3190kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Kwedpfx Aownitiod Nst Lukas van Rossum

Condition: excellent (used), TOS four-sided planer and moulder 220/120 mm, 5 spindles, in excellent condition Kwodpjycgnlofx Ad Net

Condition: used, Year of construction: 2000, Horizontal Boring Mill Manufacturer: TOS Model: VARNSDORF WHQ 13.8 CNC Year of manufacture: 2000 CNC control: Heidenhain 426 Completely overhauled in 2022 Report available Kwedpox A Ayisfx Ad Not Travel (X/Y/Z): 3,500 x 2,500 x 1,250 x B800 mm Number of axes: 5 Table length: 2,200 mm Table width: 1,800 mm Clamping area: 1,800 x 1,600 mm Table load: 12 t Number of tool stations: 60 Spindle taper: SK 50 Spindle diameter: 130 mm Spindle speed: 2,500 rpm Power: 90 kW Heidenhain handwheel Telescopic guard fully refurbished with new wipers. Dimensions (LxWxH) approx.: 7,500 x 6,950 x 4,000 mm Weight: 40 t 21126ä

Condition: ready for operation (used), Year of construction: 1999, overall weight: 70 kg, number of axes: 5, This 5-axis TOS VARNSDORF W 100 A was manufactured in 1999. It operates on a voltage of 3PE ~ 400 V, with a frequency of 50 Hz and a current of 22 A. The machine's power capacity is 15 kVA, and it weighs 70 kg. Consider the opportunity to buy this TOS VARNSDORF W 100 A horizontal machining centre. Contact us for more information. • Voltage: 3PE ~ 400 V • Frequency: 50 Hz • Current: 22 A Kwodpeyblnuofx Ad Net • Power: 15 kVA • Control voltage: 24 V

Condition: excellent (used), Catalogue number 7804 TECHNICAL DATA - Track width: 350mm - Shaft width: 330mm - Mounted blade: 300mm - Max blade diameter: 400mm - Blade bore diameter: 70mm - Max cutting height with 400mm blade: 150mm - Table dimensions: 2240x770mm – From above: - kickback/retractors - slip roller - retractors - smooth slip roller - shaft with saw blades - 2 slip and pressure shafts – From below: - roller in front of the table - guide - pawls - track - central track lubrication - electric raising of saw blade shaft 0.75kW - electric raising of machine body 0.75kW - variable feed speed adjustment - Extraction nozzle diameter: 320mm - Main motor: 45kW - Overall dimensions (L/W/H): 2280x1820x2040mm - Weight: 2850kg ADVANTAGES – Czech production – Used multi saw machine Kwedpfx Aoxvb S Rsd Njt – Technical documentation (DTR) – Very good condition Net price: 62,900 PLN Net price: 14,970 EUR depending on EUR rate 4.2 (Prices may change with significant fluctuations)

Year of construction: 1996, condition: ready for operation (used), travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, spindle speed (max.): 2,500 rpm, number of axes: 5, This 5-axis TOS WHN 13.8 boring machine was manufactured in 1996. It features a working spindle diameter of 130 mm, X-axis travel of 3500 mm, Y-axis travel of 2000 mm, and a Z-axis travel of 1250 mm. The rotary table clamping surface measures 2200 x 1800 mm, supporting a maximum workpiece weight of 12,000 kg. If you are looking to get high-quality boring capabilities, consider the TOS WHN 13.8 machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Rotary table clamping surface: 2200 x 1800 mm Extra Information Working spindle diameter: 130 mm Kwsdpfx Aeyar D Hjd Nst Technical Specification Taper Size ISO 50

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,400 mm, This 3-axis TOS KUŘIM FS 100 S/A3 vertical machining centre was manufactured in 2002. Consider the opportunity to buy this TOS KUŘIM FS 100 S/A3 vertical machining centre. Contact us for more information. Additional equipment • Additional Documentation: User manual available Machine Benefits Technical Machine Benefits • Feed rates: standard: 1 to 5000 mm/min / rapid traverse (y and z axes): 10 m/min/ feed rate: 12 m/min • Worktable: size: 1000 x 3000 mm / maximum workpiece weight: 7000 kg / number of t-slots: 7 / distance between t-slots: 140 mm / t-slot width: 22 mm / table height from the base (floor): 900 mm Kwjdpfx Adoyar A As Nst • Spindle: spindle taper: iso 50 / spindle diameter at the front bearing: 85 mm / minimum spindle distance from the worktable: 125 mm / maximum spindle distance from the worktable: 1775 mm / spindle speed: 16 to 3500 rpm (stepless)

Condition: excellent (used), CATALOGUE NUMBER: 7480 Technical data: - Track width: 360mm - Shaft width: 350mm - Max. disc diameter: 350mm - Disc bore diameter: 80mm Kwsdpjuzu T Tefx Ad Njt - Max. cutting height: 120mm - Table size: 2040x1220mm Top section: - Pawls - Driven, toothed shaft - Pawls - Shaft with saw blades - Slip/pressure shaft Bottom section: - Rollers in front of the table, 2 pcs - Guide rail - Pawls - Track - Central track lubrication - Electric lifting of the saw shaft - Electric body lifting - Stepless feed speed control - Extraction port diameter: 140mm, 160mm - Main motor: 30kW - Overall dimensions (L/W/H): 2600x2300x1850mm - Weight approx. 4000kg ADVANTAGES – Czech manufacture – Used multirip saw – Very good condition Net price: 33,900 PLN Net price: 8,070 EUR (depending on the 4.2 exchange rate) (Prices may change with significant fluctuations)

Year of construction: 1980, condition: used, turning diameter over bed 655 mm turning diameter over slide rest 390 mm turning length 1250 mm Kjdpfjlc Uk Iox Ad Nowt spindle bore 82 mm spindle turning speed range 9-1120 U/min feeds 0,049-3 mm/U total power requirement 12 kW weight of the machine ca. 5,2 t required space 3,5 x 1,9 x 1,7 m m

Condition: ready for operation (used), Year of manufacture: 1976 Spindle taper: SK40 Speed: 28-1400 rpm X-axis: 1300 mm Y-axis: 1000 mm Z-axis: 1250 mm W-axis: 700 mm Table dimensions: 1120x1000 mm Rotary table: 360° Motor power: 7.5 kW Machine dimensions (LxWxH): approx. 5000 mm x 2700 mm x 3000 mm Machine weight: approx. 9000 kg The machine can be loaded into a container. Kjdeycqkdspfx Ad Nowt

Condition: reconditioned (used), Year of construction: 2001, , Basic information Manufacturer TOS SVITAVY Type PKSN 32 B Category Multiripsaws Shipping Delivery to be agreed Terms Technical parameters Maximum Working Width #### mm 400 Machine with simultaneous transport and processing of the element The machine is CE marked Used machine Minimum Working Length #### mm 330 Engine power #### kW 55 Supply voltage #### V 380-400 Safety Guards Completely renovated Electrically Controlled Adjustments Technically efficient Perfect condition Shank Diameter #### mm 70 With one tool spindle With noise reduction housing Cast iron body Feed Speed #### m / min 36 Spindle Lock Maximum cutting height #### mm 160 New Electricity New Mechanics New Pneumatics New Painting Noise Level #### Db 70 Right and Left Rotation Automatic adjustment Very good condition Cutting width #### mm 400 Machine width #### mm 1800 Machining Width Saw blade diameter #### mm 400 Machine weight #### kg 3500 Machine dimensions #### x #### x #### mm 1600x1800x2500 Cutting Height Ksdpfxshixkho Ad Nowt Machining height #### mm 160 With freely adjustable speed With the transport of the element in the machine

Condition: used, mileage: 406,000 km, power: 335 kW (455.47 HP), first registration: 06/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 07/2026, color: black, gearing type: automatic, emission class: euro6, loading space length: 6,500 mm, loading space width: 2,500 mm, Year of construction: 2018, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), * Mercedes-Benz Antos 2646 6x2 building materials transporter * Euro 6c * Local distribution cab * Automatic transmission * Atlas rear crane 206.3 from year 2018 * 2-stage support legs * Air suspension * Elevated driver’s seat * Lift/steerable axle * Differential lock * Air conditioning * Heated seat * Cool box * Lane assist * PTO (Power Take-Off) * Cool box * Rotating beacons * Lamp bar * Air horns * Trailer coupling * Radio/CD/AUX * First owner Kjdpfx Adsycn A Rs Nowt * Permissible total weight: 26,000 kg * TÜV valid until 07/2026 * Curb weight: 14,560 kg

Condition: used, mileage: 349,500 km, power: 265 kW (360.30 HP), first registration: 11/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: blue, gearing type: automatic, emission class: euro6, loading space volume: 47 m³, loading space length: 7,140 mm, loading space width: 2,480 mm, loading space height: 2,670 mm, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, ANTOS 1836 L Flatbed/Tarpaulin 7.15 m with Trailer Coupling and Forklift Mount * Sliding tarpaulin on both right and left sides * Prepared for truck-mounted forklift * Engine OM 470, inline 6-cylinder, 10,677 cc * Vehicle number for customer inquiries: 4582 * Euro VI engine version, with OBD-C * Active Brake Assist * Rear axle differential lock * Air conditioning * Radio/navigation system with Bluetooth, comfort version * Lane Departure Warning Assist * Environmental badge (green) * Standard trailer coupling, D40, Rockinger * Attention Assist * Rear axle air suspension, low-frame * Electronic Stability Program (ESP) * Front axle air suspended * Auxiliary hot water heater, cab * Driver airbag * Trailer brake connection rear, Duo-Matic + Standard * 2-line trailer brake, connections left side * 12 V trailer socket, 13-pin, frame-mounted, LED * 24 V trailer socket, 15-pin * Antos * Electronic braking system with ABS and ASR * Comfort driver's air-suspended seat * Transmission G 211-12/14.93-1.0 * Central locking system * Mercedes PowerShift 3 * Standard engine brake system * Exterior sun visor, transparent * Fuel tank 390 l, left, 650 x 565 x 1250 mm, aluminum * Cruise control * High storage compartment on engine tunnel * AdBlue tank 60 l, left * Roof hatch/ventilation flap * Cab rear wall with window * Weight variant 18.0 t (7.5/11.5) * Heater, electronic air supply unit * M-Cab ClassicSpace, 2.30 m, tunnel 170 mm Kedpsycm Niofx Ad Nowt * Engine OM470, inline 6, 10.7 l, 265 kW (360 HP), 1800 Nm * Wheelbase 5800 mm * Tubeless tires, 315/60 R 22.5 rear axle * Tubeless tires, 355/50 R 22.5 front/lifted/non-driven axle * Sun blind, side, driver's side * Pre-installed for toll recording * Digital tachograph, EC, rev counter, ADR No liability for printing or typing errors Sale to trade customers only Subject to errors and prior sale. Changes, prior sale, and errors are expressly reserved. The description serves solely to identify the vehicle and does not constitute any guarantee within the scope of sales law. The description in the purchase contract is decisive. * TOP SERVICE + QUALITY * We can provide you with a LEASING-FINANCING-INSTALLMENT PURCHASE offer * Extended warranty insurance available on request from the insurer * TÜV / UVV tail lift / tachograph inspection and OBU device installation can be arranged by our local partners * Customs license plates for 30 days * All export customs documents possible but must be requested individually * TOLL payment can be arranged in-house via Toll-Collect * Free transfer from Stuttgart Airport or Metzingen (Württ) train station * ARRIVAL TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * * ---- Visit us on our website at * Over 200 vehicles always in stock

Condition: used, mileage: 349,500 km, power: 265 kW (360.30 HP), first registration: 11/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: blue, gearing type: automatic, emission class: euro6, loading space volume: 47 m³, loading space length: 7,140 mm, loading space width: 2,480 mm, loading space height: 2,670 mm, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, ANTOS 1836 L Flatbed/Tarpaulin 7.15 m with ZAA-Trailer Hitch * Sliding tarpaulin on both right and left sides * Prepared for forklift piggyback mount * Engine OM 470, I6, 10,677 ccm * Vehicle number for customer inquiries: 4582 * Euro VI engine version, with OBD-C * Active Brake Assist * Rear axle differential lock * Air conditioning * Radio/Navigation system Bluetooth, comfort * Lane Keeping Assistant * Environmental badge (green) * Trailer coupling standard, D40, Rockinger * Attention Assist * Air suspension, rear axle, low frame * Stability Control Assist (ESP) * Front axle air-suspended * Additional hot water cab heater * Driver airbag * Rear trailer brake connection, Duo-Matic + Standard * 2-line trailer brake, brake connectors left * Trailer socket 12 V, 13-pin, fixed to frame, LED * Trailer socket 24 V, 15-pin * Antos * Electronic brake system with ABS and ASR * Comfort driver's suspension seat * Transmission G 211-12/14.93-1.0 * Central locking system * Mercedes PowerShift 3 * Standard engine brake system * External transparent sun visor * Tank 390 l, left side, 650 x 565 x 1250 mm, aluminum * Cruise control * High storage shelf on engine tunnel * AdBlue tank 60 l, left side * Roof hatch/ventilation flap * Cab rear wall with window * Weight variant 18.0 t (7.5/11.5) * Heating, electronic compressed air supply unit * M-Cab ClassicSpace, 2.30 m wide, 170 mm tunnel * Engine OM470, I6, 10.7 l, 265 kW (360 HP), 1800 Nm * Wheelbase 5800 mm * Tubeless tires, 315/60 R 22.5 rear axle * Tubeless tires, 355/50 R 22.5 front axle/FA+SFA * Side sun blind, driver's side * Pre-installed for toll collection * Digital tachograph, EC standard, rpm display, ADR No liability for printing or typing errors Sale to businesses only Errors and prior sale excepted* Changes, prior sale, and mistakes expressly reserved. The description is for vehicle identification and does not constitute a warranty in a legal sense. The purchase contract description is decisive. * TOP SERVICE + QUALITY * We are happy to provide you with a LEASING-FINANCING-HIRE PURCHASE offer Guarantee insurance possible on request from the insurer Kedpfxjycm Nco Ad Newt * TÜV / UVV LBW / Tachograph check and OBU installation available from our local partners * Export license plates for 30 days All export documents are possible, but must be requested individually * TOLL for Toll Collect can be arranged in house * Free transfer from Stuttgart Airport or Metzingen (Württ) railway station * ARRIVAL TRAIN STATION: 72555 METZINGEN / WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP Number * * ---- Visit us on our website at * Over 200 vehicles always in stock

Condition: used, mileage: 800,000 km, power: 301 kW (409.25 HP), first registration: 03/2005, fuel type: diesel, axle configuration: > 3 axles, color: white, gearing type: mechanical, emission class: euro3, Year of construction: 2005, LICENSE PLATE: CT821CZ TITLE: RENAULT 420 SKIP LOADER, FRONT LEAF SPRINGS AND REAR AIR SUSPENSION, 8X2 REF: 24C73 YEAR: 03/2005 POWER: 410 HP Kwjdsxymbxspfx Ad Nst ENGINE CAPACITY: 11,116 cc EMISSION STANDARD: Euro 3 MILEAGE: 800,000 km TRANSMISSION: Manual DIFFERENTIAL LOCK: Yes RETARDER/INTARDER: No AXLES: 4 WHEELBASE: 4,500 mm TOWING CAPABILITY: Yes ORIGIN: Italian CABIN: Short and low SEATS: 2 PAYLOAD: 20,230 kg - GVW (TRUCK ONLY): 32,000 kg - GVW (TRUCK + TRAILER): 44,000 kg BODY TYPE: Skip loader SKIP LOADER MODEL: TAM T25.56 EXTENDING ARM: Yes SWING: No ROLLER: Vertical ADR CERTIFIED: No BODYWORK LENGTH: FROM: 4.90 m + 0.20 m TO: 6.10 m + 0.20 m TOTAL LENGTH: 8.62 m TOTAL LENGTH WITH CONTAINER: 9.00 m ACCESSORIES: - Piping for crane and/or trailer REFURBISHED: Yes INSPECTED: Yes TYRES: 1st, 2nd and 3rd axles fitted with new tyres, 4th axle tyres at 50% PRICE: €29,500.00 + VAT Errors and/or omissions excepted. Prices do not include VAT. Please contact our sales department for up-to-date pricing and terms. For more information: Loris: +39 348 4773001 URL: #glispecialistidelloscarrabile AURORA SKIP LOADERS Specialists in the sale and purchase of commercial and industrial vehicles, mainly for the waste management sector. We specialize in trucks, trailers, and demountable equipment. Our ready-to-deliver fleet includes over 50 trucks and more than 150 bodies and containers, with or without demountable cranes. E.&O.E. Given the quantity of listings and details provided, Aurora recommends verifying the accuracy of the information with our sales team.

Year of construction: 1980, condition: ready for operation (used), travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, controller manufacturer: HEIDENHAIN, controller model: 426, spindle speed (max.): 2,500 rpm, table length: 1,800 mm, table load: 12,000 kg, table width: 1,800 mm, number of axes: 4, This 4-axis TOS WHN 13.8 CNC boring machine was manufactured in 1980 and retrofitted in 2001. It features a working spindle diameter of 130 mm, a clamping cone 50 ISO, and a spindle speed of 2500 rpm. The machine supports a table load capacity of 12000 kg and includes SIEMENS motors and drives. If you are looking to get high-quality boring capabilities, consider the TOS WHN 13.8 CNC machine we have for sale. Contact us for more information. Machine Benefits Qualitative Machine Benefits • Retrofitted in 2001 • Refurbished in 2024 Ksdpfx Adox U Ttmj Njwt • 6-month warranty on mechanical parts Technical Machine Benefits • Working spindle diameter: 130 mm • Clamping cone: 50 iso Extra Information Machine still under power / 6-month warranty on mechanical parts // Scope of refurbishment (2024): ■ Cleaning the machine ■ Checking and adjusting the machine geometry ■ Regrinding the spindle cone ■ ...possibility of replacing the spindle for an additional fee ■ Checking the machine's functionality ■ Revision of the electrical equipment ■ Revision of the hydraulics and lubrication ■ Adjustment of clearances and optimization of drives ■ Replacement of the guide surface wipers ■ Repair of the telescopic machine cover ■ Replacement of the balancing ropes ■ Repair of the platform ■ Revision of the cooling CHZ13

Condition: used, mileage: 290,000 km, power: 200 kW (271.92 HP), first registration: 06/2020, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,800 mm, fuel: diesel, brakes: engine braking, color: white, gearing type: automatic, emission class: euro6, total length: 10,100 mm, total width: 2,550 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, tail-lift, traction control, Front axle: Max. axle load: 8000 kg; Tyre profile left: 100%; Tyre profile right: 100% Rear axle: Double wheels; Max. axle load: 11500 kg; Tyre profile left inner: 40%; Tyre profile left outer: 40%; Tyre profile right outer: 40%; Tyre profile right outer: 40% Number of cylinders: 6 Engine capacity: 7.698 cc Empty weight: 9.071 kg Carrying capacity: 10.729 kg Kwjdpfxoycc I Uj Ad Net GVW: 19.800 kg Tail lift: Dhollandia, tail lift, 2000 kg Registration number: BB-695-R

Condition: as good as new (ex-display), Year of construction: 2026, TOS Varnsdorf WH 10 CNC Heidenhain TNC620 / Sinumerik ONE, CE-certification Work spindle diameter 100 / 105 mm Clamping taper ISO 50 Tool shank 69871 DIN Clamping adapter - screw TOS 4100793 Main motor power (S1/S6-40%) 22/34 kW Max. spindle speed 2500 / 3000 rev/min Max. torque of the spindle (S1/S6-40%) 2173/3250 Nm Table transverse travel X 1250 / 1800 mm Headstock vertical travel Y 1100 / 1250 mm Table longitudinal travel Z 1000 mm / 1250 mm Spindle stroke W 630 mm Table clamping surface 1000x1100 / 1200x1400 mm Workpiece weight max. 3,000 / 4000 kg Feed range 4 – 6000 mm/min Total power consumption 50 kVA Machine weight 13 000 kg Features mechanical side - hardened guide surfaces on all axes - Biplast-V lining for the guide ways counter surfaces - Geometric accuracy according to the accuracy protocol TOS Varnsdorf WH 10 - Sliding working spindle with diameter of 100 mm, spindle bearings - FAG, SKF - hydraulic tool clamping set 22kN - Ott-Jakob - Headstock with cooling circuit - Ball screws on the X, Y, Z and W axes - KSK Kurim - Rim and pinion for precise rotary table positioning - Hydraulic system (unit, pumps, hoses, fittings) - Rotary table reinforcement controlled by CNC system - Central lubrication system controlled by CNC system - Tribotec - Telescopic covers (X and Z axes) Features electrical side - CNC control system iTNC 620 Heidenhain Gen3 + Heidenhain Options nr. 8, 19 and 20 - Servo-motors Siemens 1FKZ 100…(5 pcs.) - Spindle motor 1PH8135... - 22kW - Converter Heidenhain UM114D - Linear scales Heidenhain for X, Y and Z axes - Encoder Heidenhain ROD 480 for rotary table - Encoder Heidenhain TTR ERM for spindle - Oriental stop - Control cabinet from Ritall with cooling unit - Wiring and modern electrical components - End-limit switches Balluff - Rotational control panel - Workplace lighting Other - Electrical inspection report, technical documentation - Certificate of geometric accuracy WH 10 Tos Varnsdorf - spindle ball-bar test protocol, linear scales accuracy protocol - cooling of work space placed on spindle forehead (tank, pump, hoses) - working spindle support with brass bushings SP200 Tos Varnsdorf - Heidenhain HR510 handwheel - Heidenhain Linear scales upgrade to LC115 series for X, Y and Z axis Options - Through spindle coolant Kwedpfepdrzzox Ad Net - CE certificate for the machine - Safety fence and operator cabin with sliding door, - Automatic tool changer TOS Varnsdorf AVN 40 - Heidenhain TS 460 radio touch probe + receiver - Dismantling of the machine, packaging and loading - Machine installation - Extension of the 12-month warranty by a further of 12 months

Condition: excellent (used), Year of construction: 1996, turning diameter 380 mm turning length 750 mm control HEIDENHAIN ManualPlus Kedpfx Aex U Encod Newt total power requirement 9 kW weight of the machine ca. 2 t dimensions of the machine ca. 2,4 x 1,7 x 1,7 m

Condition: used, Year of construction: 1988, control Heidenhain 355 tool adaptor SK50 weight of the machine ca. 8 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Kjdpfx Ajf Tdvbjd Nswt +++++

Condition: used, Year of construction: 1997, Control Heidenhain 355 x-travel 850 mm y-travel 550 mm z-travel 450 mm tool taper SK50 weight of the machine ca. 5,5 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Kedod N Smhjpfx Ad Newt +++++