Used Tos Fn for sale (9,300)

Condition: good (used), Well used TOS TRENCIN SUI40-50. lathe Center width 1500 mm Rotation over machine bed 500 mm Rotation over support 320 mm Spindle speed 14 to 2240 rpm Isdpfx Ajrwd Hzefisbc Machine is operational and in good condition

Year of construction: 1988, condition: good (used), TOS SN 50 B (1988) Manufacturer: TOS Model: SN 50 B Year of manufacture: 1988 Type: Universal centre lathe Swing over bed: 500 mm Swing over cross slide: 270 mm Swing in gap: 700 mm Distance between centres: 1500 mm Bed width: 300 mm Spindle bore: 52 mm Spindle speed range: 22 – 2000 rpm Spindle nose: Camlock D1-6 Spindle motor power: 7.5 kW Longitudinal feed range: 0.04 – 2.24 mm/rev Cross feed range: 0.02 – 1.12 mm/rev Metric threads: 0.5 – 224 mm Iodexl Tt Sopfx Afiobc Inch threads: 56 – 0.25 TPI Module threads: 0.25 – 112 mm DP threads: 112 – 0.25 DP Tailstock quill diameter: 75 mm Tailstock quill travel: 160 mm Tailstock taper: Morse 5 Machine length: approx. 2800 mm Machine width: approx. 1100 mm Machine height: approx. 1300 mm Machine weight: approx. 2000 kg

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, feed rate Y-axis: 816 m/min, working width: 180 mm, planing height: 180 mm, spindle diameter: 40 mm, total length: 3,000 mm, spindle speed (max.): 6,000 rpm, Four-sided planer manufacturer TOS Ibjdpfxouyvnpe Afiec

Condition: excellent (used), Year of construction: 2005, table load: 15,000 kg, rotary table diameter: 1,600 mm, Specification Dimension of bed – width 1170 mm height 290 mm length 2000 mm Dimension of slide - width x length (with no extensions) 1340 x 1300 mm height over the sliding surface 320 mm Length of travel along the „W“ axis 500 mm Rotary table surface clamping dimensions Ø 1500 mm Ibjdow Uz S Aepfx Afioc Centering hole 100 H7 mm Height of the rotary table from the sliding surface 590 mm Number of clamping slots 9 Size of clamping T-slots. 22H7 Spacing of the T-slots 160 mm Speed of rotation smoothly controllable within the limits 1 ÷720 °/min Maximum centric load on the rotary table due to the workpiece mass 15000 kg Maximum eccentric load on the rotary table due to the workpiece weight (up to 750 mm distance of the workpiece center of gravity from the rotary table axis) 5000 kg Maximum rotary table bearing capacity – centre of gravity from table axis 500 mm Maximum torque on rotation 15000 Nm Maximum torque on stiffening 10000 Nm Maximum tilting moment to a plane perpendicular to clamping surface 15000 Nm Total time required for the table turning cycle through 360° 30 sec Working feed along the W-axis 1÷5000 mm.min-1 Fast feed along the W-axis 5000 mm.min-1 Oil working pressure (table stiffening) 5 MPa (drive pre-stressing) - MPa Table positioning accuracy Rotation Bilateral accuracy of the A-position setting by the ISO 230-2 16 µm Unilateral repeatability of the R-position setting by the ISO 230-2 8 µm Linear axis Bilateral accuracy of the A-position setting by the ISO 230-2 0,02 µm Unilateral repeatability of the R-position setting by the ISO 230-2 0,01 µm Table turning part peripheral accuracy ±0,01 mm

Condition: reconditioned (used), Year of construction: 1994, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, torque: 1,200 Nm, controller manufacturer: Heidenhain iTNC 426, workpiece weight (max.): 9,000 kg, total height: 3,320 mm, total length: 9,660 mm, total width: 4,918 mm, spindle speed (min.): 11 rpm, spindle speed (max.): 2,500 rpm, The machine is currently disassembled and is undergoing refurbishment with the following scope of work: Ijdpexnkkajfx Afijbc - Complete disassembly and cleaning - Inspection of all components - New Tribotec lubrication unit - Overhaul of the dedicated console balancing circuit - Milling head “O” – complete overhaul including replacement of gears - Replacement of the gearbox bearings - Replacement of belts - Repair of ball screws and their bearings - Resealing of the machine’s hydraulic circuits and replacement of solenoid valves - Addition of automatic gear lubrication in the milling head - Resealing of all hydraulic cylinders and modernization of seals - Overhaul of the hydraulic power unit - Overhaul of Indramat feed motors and the spindle motor - Repair and adjustment of Indramat drives - Overhaul of the electrical cabinet including control elements - Replacement and modernization of limit switches throughout the machine - Repair or replacement of Heidenhain system cables and TNC 426 - Overhaul of the control panel - Overhaul of the Heidenhain TNC 426 control system, including keyboard and display unit - The machine will be fully functional and delivered with geometric accuracy documented by protocol - New machine paint in RAL 5005 and RAL 9010 color scheme. Technical Data Maximum spindle torque: 1,200 Nm Maximum feed force in X, Y, Z axes: 20,000 N Maximum workpiece weight: 9,000 kg Total table area: 1,000 x 4,000 mm Number of T-slots/table pitch: 7/140 mm Slot width: 24H7 mm Table height from base: 900 mm Longitudinal travel (X): 4,000 mm Cross travel (Y): 1,000 mm Vertical travel (Z): 900 mm Minimum distance from horizontal spindle axis to table clamping surface: 150 mm Maximum distance from horizontal spindle axis to table clamping surface: 1,500 mm Minimum distance from vertical spindle nose to table clamping surface: 130 mm Maximum distance from vertical spindle nose to table clamping surface: 1,030 mm Distance from horizontal spindle nose to inner table edge: 80 mm Distance from vertical spindle axis to inner table edge: 100 mm Spindle taper: ISO 50 Retraction force of clamping mechanism: 16,100 N Horizontal spindle swiveling – bilateral: 180° Vertical spindle swiveling – bilateral: 180° Spindle head positioning: adjustable in 2.5° increments Usable power of main drive motor: 22 kW Spindle speed range: 11 to 2,500 rpm Number of spindle speed steps: stepless Feed rate range: 1 to 5,000 mm/min Rapid traverse in Y, Z axes: 10 m/min Rapid traverse in X axis: 10 m/min Machine available for delivery at the end of 2025.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,120 mm, travel distance Z-axis: 900 mm, nominal power (apparent): 10 kVA, table width: 1,120 mm, table height: 1,120 mm, spindle speed (max.): 1,100 rpm, tool weight: 15,000 g, The machine is like new after a complete overhaul, 4-axis digital measurement Newall. Isdsv A Irhjpfx Afiebc

Condition: ready for operation (used), Spindle bore: 60 mm Swing diameter over bed: 500 mm Ibsdeiqtzkopfx Afijc Center length: 1000 mm Dimensions: 3100x1400x1600mm

Year of construction: 1990, condition: good (used), HEIDENHAIN TNC-355 Working travels 850x500x450mm Table size 1250x500mm Spindle taper 50 Spindle speeds 35,5-1800 rpm Misc.accessories MARCELS MASCHINEN CH Ibsdpfx Aofg Ep Djfijc

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Swing dia over bed 400 mm Swing dia over crosss slide 220 mm Ibodpfx Afjxiymteiec Between centers 1500 mm Spindle hole 50 mm Spindle speed 12,5 – 3150 rpm Spindle power 5,5 kW Power required 16 kVA Dimensions L x W x H = 2900 x 1000 x 2200 mm Weight cca 1600 kgs Accessories, features - 3 jaws chuck, D200 mm chuck - 4-fold tool holder - Tailstock - Display motor load - Rapid speed - Driwing system by clutch - Spindle break - Splash wall - Hardened and ground linear guides are in perfect condition - Steady rest - Coolant unit - Manual The machine is in great and original technical condition. It was barely used. No DRO system on it.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 2,200 mm, table load: 15,000 kg, spindle diameter: 130 mm, spindle speed (max.): 3,000 rpm, table length: 2,500 mm, table width: 1,800 mm, spindle stroke: 800 mm, Tos Varnsdorf WHQ 13 CNC boring mill with: Isdpfxswtmvxo Afiobc - X-axis travel 5000 mm - Y-axis (vertical) travel 3000 mm - Z-axis (cross) travel 2200 mm - W-axis (quill) travel 800 mm - rotary table size 2500 x 1800 mm - Heidenhain iTNC 530 CNC control - spindle speed 3000 rpm - 60-position tool magazine - high pressure through-spindle coolant - hinged belt chip conveyor - standard accessories included - year of manufacture 2012 - year of installation 2017 0% financing over 12/24 months available

Year of construction: 2020, operating hours: 10,245 h, condition: ready for operation (used), Control Unit Brand HEIDENHAIN Model iTNC 640 Main Drive Ibedpfxjxirlzj Afijc Number of axis 4 Movement X-Axis Movement 1250 mm Y-Axis Movement 1100 mm Z-Axis Movement 940 mm W-Axis Movement 710 mm Workpiece Workpiece weight 3000 kg This 4-axis TOS Varnsdorf WHQ 10 CNC boring machine was manufactured in 2020. It features a spindle diameter of 100 mm, ISO 50 taper, and spindle speeds up to 2500 rpm. The table can handle weights up to 3000 kg and includes a 40-position tool changer. Currently operational, though "Y" axis calibration is needed. Consider the opportunity to buy this TOS Varnsdorf WHQ 10 CNC boring machine. Contact us for more information about this machine. Application Types Other Machine Tools

Condition: good (used), Year of construction: 1981, Max. module 16 Ibodpfov Urttox Afiec Min. module 4 Max. wheel diameter 1600 mm Mon. wheel diameter 800 mm Table load 700 kg Machine weight 19 t Dimensions L x W x H 4300 x 2000 x 3170

Condition: good (used), Year of construction: 2003, Ref. -No.: 10603 Manufacturer: TOS Type: WRD 1500 Year of construction: 2003 Type of control: CNC Control: Heidenhain TNC 430 Storage location: Halberstadt Country of origin: Tschechien X-Travel: 10000 mm Y-Travel: 4000 mm Z-Travel: 1000 mm W-Axis: 800 mm V-axis travel: 2000 mm Spindle Diameter: 150 mm Max. Workpiece Weight: 25000 kg Tool Taper: ISO 50 DIN 68971 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Turning Speed - Stepless: 10 - 2500 RPM Feed Speeds X/Y/Z Axis: 1 - 8000 mm / min Drive Capacity - Spindle Motor: 60 kW Total Power Requirement: ca. 80 kW Iodpfxexhbt Se Afijbc Internal cooling: 20 bar Rotary table diameter: 2500 x 3000 mm Support sleeve dimensions: 450 x 450 mm Rapid traverses Z + W: 12000 mm / min

Condition: ready for operation (used), Max. grinding length: 1000mm Max. grinding diameter: 320mm Ibedpfx Asxl Rumefiec

Condition: ready for operation (used), chuck outer diameter: 1,620 mm, total height: 4,650 mm, empty load weight: 20,000 kg, + zijsteun Elektrisch vernieuwd in 2007!!! Max turningdia -- passage: 1700 mm Power on the spindle: 37 kW Max hight of workpiece Z-axis: 1290 mm Ibedoxgv Rcepfx Afiec Digital screen: Heidenhain 2 axes Number of speeds: 3,5 - 150 rpm Long: 4550 mm Wide: 2670 mm

Condition: good (used), Year of construction: 2007, 1 used cylindrical grinding machine, manufacturer Tos BHU 25 Year of manufacture: 1984 / complete retrofit at Tos in 2007 Technical Specifications: Center distance: 600 mm Swing diameter: 280 mm Max. longitudinal travel: 600 mm Max. transverse travel: 245 mm Grinding wheel: Diameter: 400 mm Ibodsxgbbgepfx Afiec Width: 40 mm Bore: 127 mm Max. wheel width: 63 mm Max. workpiece weight between centers: 60 kg Grinding wheel speed: Number of steps: 2 From: 1570 rpm To: 2050 rpm Swiveling grinding head: +/-60° Workpiece headstock: Speeds: Number of steps: 12 From: 22 rpm To: 710 rpm Swivel range: 90° Spindle taper: 4 Morse taper Tailstock quill taper: 3 Morse taper Maximum table swivel: +/- 7° Electrical connection: 50 Hz 3-phase 380 Volt External grinding spindle motor: 4 kW Total power requirement: 8 kVA Machine weight approx.: 2500 kg Machine dimensions: Length: 1600 mm Width: 1400 mm Height: 1300 mm Various accessories: Tailstock with fine adjustment Coolant system Various grinding wheels with flange

Condition: used, Technical details: turning diameter over bed: 800 mm turning diameter over support: 530 mm centre distance: 1250 mm turning diameter in the gap: 900 mm center height over support: 530 mm turning length: 1800 mm center height over bed: 395 mm spindle bore: 82 mm revolution per minute: max.900 U/min force of feed longitudinal: 25000 N bed width: 710 mm weight of the machine ca.: 6,5 t dimensions L x W x H: 4,01 x1,9 x 1,52 m Lathe chuck with 500mm 3-jaws/soft jaws Longitudinal feed in steps of 60 Thread feed metric/inch/pitch thread Tool holder MK6 Accessories: Steady rest diameter 500mmm closed Ibsdev Uzn Tepfx Afijc Steady rest diameter 300mmm closed without attachment Multifix mountings *

Condition: like new (used), Year of construction: 1984, functionality: fully functional, workpiece weight (max.): 300 kg, grinding length: 1,500 mm, grinding diameter: 320 mm, Cylindrical grinding machine TOS BHU 32A/1500, grinding diameter 320 mm, grinding length 1,500 mm, after our complete overhaul in 2016, in perfect technical and visual condition. Iedpfjxf Hnisx Afijbc

Condition: good (used), Year of construction: 2004, Ref. -No.: 10520 Manufacturer: TOS VARNSDORF Type: WHNQ 13 CNC Year of construction: 2004 Type of control: CNC Control: HEIDENHAIN TNC 430 Storage location: Halberstadt Country of origin: Czech Republic Machine-No.: 23XX X-Travel: 3500 mm Y-Travel: 2500 mm Z-Travel: 1250 mm W-Axis: 800 mm Table Load: 12.500 kg Clamping Area: 1800 x 2500 mm Tool Taper: SK 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 3.000 RPM Max. Torque: 3323 Nm Rapid Travel X/Y/Z: 10000 mm / min Drive Capacity - Spindle Motor: 37 / 1500 kW Weight Of The Machine Ca.: 40 t Further information: - Tools + accessories - Angle head - Angle up to 2.5m - Chip conveyor - 3D measuring probe - Clamping device Ibsdpsw Nmw Hofx Afioc Machine is still in production and can be inspected under power by arrangement.

Condition: excellent (used), TOS-TRENCIN SV 18 RA – Lead and Feed Screw Lathe For sale is a lead and feed screw lathe from the manufacturer TOS-TRENCIN, model SV 18 RA. The machine is in perfect condition and comes from the R&D department of a former VEB in Neubrandenburg (never used in production). ——— Technical Specifications • Swing over bed: 360 mm • Swing over cross slide: 215 mm • Turning length: 1,050 mm • Spindle bore: 40 mm • Distance between centers: 900 mm • Speed range: 14–2,800 rpm (21 steps) • Center height: 180 mm • Total connected load: 6.5 kW • Machine weight: approx. 1.9 t • Footprint (L×W×H): approx. 2.9 × 1.0 × 1.2 m ——— The machine is immediately ready for operation. • Inspection possible at any time • Loading and shipping can be arranged without issue ——— Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices are net, plus VAT. Subject to modifications and errors. Iedoxk Tyispfx Afiobc

Condition: excellent (used), CATALOG NO. 6650 TECHNICAL DATA - Max cutting height: 200 mm - Track width: 450 mm - Shaft width: 450 mm - Saw blade bore diameter: 80 mm - Shaft diameter: 60 mm - Min. blade diameter: 250 mm - Max. blade diameter: 350 mm - Max. timber width: 870 mm - Min. timber length: 1500 mm From above: - Pawls - Driven shaft, toothed, metal - Pawls - Driven shaft, toothed, metal - Pressure system - Saw shaft - 2 driven metal feed rollers, pneumatically pressed From below: - Guide rail - Metal sliding roller - Pawls - Track (caterpillar track) - Saw shaft Ibsdpfxolrvguo Afioc - Track (caterpillar track) - Stepless feed speed control via inverter: 4–40 m/min - Main motors: 2 x 75 kW - Feed motor: 3 kW - Electric raising/lowering of frame: 0.55 kW - Electric adjustment of saw shafts: 2 × 0.25 kW - Central lubrication - Extraction outlet diameter: 2 x 300 mm - Dimensions (L/W/H): 3100 x 2600 x 2000 mm - Weight: approx. 6500 kg Included: - Centering device - Toothed feed rollers: 3 pcs - Smooth feed rollers: 8 pcs - Motor: 2 × 1.5 kW - Upper pneumatic pressure system - Side pressure system - Dimensions (L/W/H): 4850 / 1100 / 1800 mm - Weight: approx. 1000 kg ADVANTAGES – Manufactured in the Czech Republic – Two-shaft – Centering device – Operating & Maintenance Documentation (DTR) – Year of manufacture: 2010 – Used multi-blade saw, very good condition Net price: 262,900 PLN Net price: 61,860 EUR Net price calculated at an exchange rate of 4.25 PLN/EUR (price may change with significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 3520, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,300 mm, feed length W-axis: 800 mm, 1 BORING MACHINE TOS WHN 13 CNC TNC 355 Year 1994 W 800 . X 3500 . Y 2000 Z 1300 Complete machine Complete tooling Isdpfx Afjw R Ag Hsisbc

Year of construction: 1996, condition: ready for operation (used), Control Unit Brand HEIDENHAIN Model TNC 426 Controller Brand Heidenhain Model TNC 426 P Main Drive Spindle speed range 0 – 2500 Tool taper ISO 50 Number of axis 5 Movement X-Axis Movement 3500 mm Y-Axis Movement 2000 mm Z-Axis Movement 1250 mm W-Axis Movement 800 mm Iedpfsxfculjx Afiobc Workpiece Workpiece weight 12000 kg This 5-axis TOS WHN 13.8 boring machine was manufactured in 1996. It features a working spindle diameter of 130 mm, X-axis travel of 3500 mm, Y-axis travel of 2000 mm, and a Z-axis travel of 1250 mm. The rotary table clamping surface measures 2200 x 1800 mm, supporting a maximum workpiece weight of 12,000 kg. If you are looking to get high-quality boring capabilities, consider the TOS WHN 13.8 machine we have for sale. Contact us for more information. Application Types Other Machine Tools

Condition: good (used), Year of construction: 2013, Ref. -No.: 10484 Manufacturer: TOS VARNSDORF Type: WHN 13 CNC Year of construction: 2013 Type of control: CNC Control: HEIDENHAIN 530 Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 3500 mm Y-Travel: 2000 mm Z-Travel: 1250 mm W-Axis: 800 mm B-Axis: 360 ° Table Load: 15.000 kg Ibjdpow Iu Nhofx Afioc Tool Taper: SK 50 Turning Speeds: 1.400 RPM Spindle Speed: 2000 RPM Further information: The control system was converted to a HEIDENHAIN 530i in 2013. All drives were upgraded to digital. The thrust bearing tower was also replaced in 2013. Accessories: 3D probe - Heidenhain, large spindle support Additional table dimensions: 3850 x 900mm 1x axis module Heidenhain (overhauled), 1 new axis module is installed in the machine. Newly packed spare parts, covers from the machine. All bearings have been replaced by the machine in recent years. Tools and milling cutter heads are available. Machine is from 1st hand. The machine is still under power and in production. The machine can be viewed by appointment.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 07-14, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,300 mm, feed length W-axis: 800 mm, 1 TOS BORING MILL TYPE WHN13 8C CNC TNC 426 CB YEAR 1990 W800 .X3500 . Y2000 .Z1300 COMPLETE MACHINES, COMPLETE TOOLING Ibodpfew R Aklsx Afisc