Used Torque Wrench-3 4 Inch for sale (53,280)

Condition: used, New: Yes Empty weight: 10 kg Part suitable for: trucks Ijdpfx Afexid A Soistn Type number: 561.1493 KS TOOLS 561.1493 OEM : 561.1493 Article nr.: KS5161493-veiling 3/4" torque wrench 150-750Nm

Condition: used, Torque wrench, torque tool -Recording: 1/2" inch -Torque: 4-13 mkp Itjdpfecbu S Nsx Afisn -Dimensions: 630/110/H40 mm -Weight: 1.2 kg

Condition: used, New: Yes Empty weight: 6 kg Part suitable for: trucks Type number: 5153250 Monster super OEM : 5153250 Itodpexh Taqsfx Afien Article nr.: KS5153250-veiling Impact wrench pneumatisch 3/4" - 3405Nm - 6.22kg

Condition: used, New: Yes Empty weight: 6 kg Part suitable for: trucks Monster super Iodpfx Asxh S T Nsfistn Article nr.: KS5153260-veiling Impact wrench pneumatisch 3/4" - 3405Nm - 6.42kg

Condition: used, torque wrench, torque tool -Manufacturer: Holex Hoffmann, torque wrench 4 -20 Nm .: 657277 26 -Torque: 4 - 20 Nm / 40 - 80 Ijdpor Im Ruofx Afietn -Shot: 9 x 12 mm -Transport dimensions: 270/50/H50 mm -Weight: 0.5 kg

Condition: used, Cutting Clamp Kit, Hand Pipe Tap, Tapping Machine, Pipe Thread Cutter, Pipe Thread Cutter, Cutting Head -for pipe size: max. 2 inches -5x cutting tips: 3/4 "1" 1 1/4 "1 1/2" 2 "inches -2x thread ratchets: Type 111-R/12-R Iedpsc T Nx Iefx Afijtn -Price: complete -Dimensions: -Weight: 12.8 kg

Condition: used, Cutting Clamp Kit, Hand Pipe Thread Cutter, Tapping Machine, Pipe Thread Cutter, Pipe Thread Cutter, Cutting Head Iedpochmdljfx Afistn -for pipe size: max. 3/4" inches -5x cutting tips: 1/8", 1/4", 3/8", 1/2", 3/4" -Number: 1x sets available -Price: per set -Dimensions: 645/100/H70 mm -Weight: 5 kg

Condition: used, Torque wrench, torque tool -Recording: 1/2" inch -Torque: 5-25 kpm -Dimensions: 480/220/H110 mm -Weight: 6.4 kg Ijdpfx Afoctg N Usiotn

Condition: new, carrying capacity per cantilever arm: 650 kg, shelf height: 4,000 mm, total length: 4,000 mm, total width: 1,480 mm, load capacity per stand: 1,950 kg, Specifications: - H: approx. 400 cm - D: approx. 148 cm - L: approx. 400 cm - Cantilever arms: approx. 120 cm including 8 cm front deflector - Axis dimension: 130 cm - NEW, immediately available from stock. Itodpfx Ajxnwrdefien - 650 kg load capacity per arm - 1950 kg load capacity per upright - Uprights in RAL 7016. - Cantilever arms in RAL 3000 - Arms are hooked in. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) The uprights in this shelving set are prepared for possible conversion to double-sided use free of charge. For the advantages of a hooked cantilever arm, see illustrations. Shelf consists of: - 4 uprights, including base section approx. 400 cm, made of IPE180. - 12 cantilever arms, approx. 120 cm, made of 10 cm x 4 cm profile. - Includes all necessary fasteners and screws. Price: €1,995.00 net €2,374.05 gross You will receive an invoice with VAT. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is available upon request through our partner shipping company; costs depend on the zip code. Installation: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Let us know your needs... We are happy to assist you with the implementation of your projects, from planning and ordering to installation.

Condition: excellent (used), Catalogue number: 7531 TECHNICAL DATA Equipment: plate tape feeder guillotine glue tank (granulate) 3 pressure rollers finished cutting unit with balls 2 milling units for shaping edges (radial cutters) 2 polishers min. length of the workpiece 140mm Itjdpovtl Tqofx Afijn min. width of the workpiece 60mm thickness of the glued element 10-55mm thickness of the edge tape 0.4-3mm support extending from the table engine power 5.6kW diameter of the extraction nozzle 120mm dimensions L/W/H 3480x1050x1020mm weight approx. 900kg – unpainted – Austrian production – year of production 2007 – very good condition good – used edge banding machine Net price: 18900PLN Net price: 4450 EUR Net price calculated according to the exchange rate of 4.25 PLN/EUR (in case of larger exchange rate fluctuations the price may change)

Condition: refurbished (used), Year of construction: 1996, Universal tool milling machine KUNZMANN WF 4/3 With 3 axes Heidenhain digital readout Year of construction: 1996 Travels: X 400 Y 320 Z 400 Speed range: 40 - 2550 rpm With the following accessories: Rigid angle table 800 mm x 360 mm clamping surface Mechanical handwheels for X , Y , Z axis Hydraulic tool clamping Automatic central lubrication pump for X , Y , Z axis Machine light 4-piece machine shoes Iodoq Ulucspfx Afijtn Coolant device Operating instructions THE MACHINE WAS ONLY USED FOR APPRENTICE TRAINING !!! THE MACHINE IS IN GOOD CONDITION !!!

Condition: good (used), For sale: individual pieces of original deep hole drilling bits by Botek (Germany) – a renowned manufacturer of precision tools for metalworking. Single-lip drills (single-edge) with internal cooling, made from K15B carbide – very hard and wear-resistant. • Diameters from 3.0 mm to 10.2 mm • Working lengths from 150 mm to 480 mm • Internal cooling through the body • Material: K15B carbide (ultrafine grain) • For steel, stainless steel, aluminum, bronze, and engineering plastics The drills are designed for precise deep hole drilling with high dimensional stability. Applications include the aerospace, automotive, hydraulic industries, and toolmaking. Condition: New and used (pre-owned), but in good technical condition. Some items may require resharpening – an ideal base for professionals. Iedpfx Aewg R I Ejfietn //// PRICE SHOWN IS PER PIECE ////

Condition: good (used), Included in delivery: 03x stacking container, used Manufacturer: SSI Schäfer Material color: hot-dip galvanized Total width: approx. 850 mm (outside- outside) frame width: approx. 800 mm Usable width: approx. 770 mm Total height: approx. 670 mm (floor - OK crane eye) Frame height: approx. 605 mm Ijdsnabz Sspfx Afietn Useful height: approx. 470 mm Underride height: approx. 105 mm Total depth: approx. 550 mm (outside - outside) Frame depth: approx. 500 mm Useful depth: approx. 490 mm Further technical data of the stacking container: Weight / pcs.: approx. 37,000 kg load: maximum 0,8 t stackable: yes (stacking factor: 1+5) crane eyes: 4 pieces diameter of crane eyes: approx. 36 mm Remark: The stacking containers may be bent. Furthermore, they may have dents or other damages. other damages. Usage: The stacking containers are suitable due to your robustness especially for the workshop or transport. Due to the catch corners and reinforced feet a safe stacking is given. Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This article is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm Iodpfxofdkbhs Afiotn - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: excellent (used), Year of construction: 2020, 1. WEISCHAUPT WM-G10/4-A (with gas line) - Power: 100-1100 kW - Model: ZM-LN Ijdjwgyrtepfx Afietn - Year of manufacture: 2020 2. WEISCHAUPT WM-G10/3-A (with gas line) - Power: 100-1000 kW - Model: ZM - Year of manufacture: 2013

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Itjdpfeguk Dksx Afijn Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), Quick-change chuck, quick-change holder, quick-change head, keyless drill holder, milling holder, quick-change insert, collet chuck, reducing sleeves, attachment holder -Quick-change chuck: MK5 shank with 10 arbor sleeves -Receiving sleeves: 2x MK5 / 3x MK4 / 4x MK3 / 1x MK2 -Shipping/Price: complete -Transport dimensions: 340/270/H150 mm -Weight: 29.8 kg/piece Iodpexdalxsfx Afiotn

Condition: good (used), Year of construction: 1990, Manufacturer: SBM Including subframe, electric motor (approx. 50 kW), and grinding track Immediately available Iodpewt Axvefx Afijtn Jaw opening: approx. 465 x 210 mm With construction as shown

Condition: used, functionality: fully functional, machine/vehicle number: H2X394C03777, Year of construction: 2012, operating hours: 11,710 h, load capacity: 4,000 kg, lifting height: 5,000 mm, fuel type: diesel, mast type: standard, construction height: 3,340 mm, fork length: 2,400 mm, drive type: Diesel, Diesel forklift truck Fahrgestellnummer: H2X394C03777 Mast type: Standard Technical condition: good Description: Linde H 40 D-01 No.: M0523 Year of construction: 2012 Operating hours: 11710 3rd and 4th valve The device is visually and technically in good condition. Subject to errors and prior sale. If you have not found your stacker, please contact us. We have a large selection of other appliances on site. Sideshift, fork positioner, Itedpjuh Hquefx Afien 3rd valve, 4th valve,

Condition: good (used), Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Adapter sleeve: Morse taper sleeve 12 pieces -Type: MK5/4 9 pieces / MK5/3 3 pieces. Iodsw Hqr Depfx Afijtn -Price/Delivery: complete -Transport dimensions: 350/260/H45 mm -Weight: 12.6 kg

Condition: good (used), Manufacturer: SBM Including base frame, electric motor (approx. 50 kW) and grinding track Itedpfow Acfhsx Afijn Jaw opening: approx. 465 x 210 mm Immediately available

Condition: good (used), Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Manufacturer: Perthel, pipe bending tool for profile bending machine -Profile diameter: pipe size 16 - 76 mm/3/8 "to 3 1/4" -Dimensions: 1020/310/H170 mm Itedpegrzuujfx Afien -Weight: 28 kg

Condition: good (used), Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Adapter sleeve: Morse taper sleeve MK6 4 pieces -Type: MK6/5 2 pieces / MK6/4 / MK6/3 -Shipping/Price: complete Itsdpjwu Sgxofx Afion -Transport dimensions: 260/220/H65 mm -Weight: 11.8 kg

Condition: used, Threading dies, replacement dies, threading head with chaser dies, threading stock, threading machine, pipe thread cutter Itedpfx Ajik Slisfien -Manufacturer: Ridgid, thread dies set unused original packaging -Type: 3/4" BSPT -Number: 2 sets available -Price: per set -Weight: 0.1kg/set

Condition: used, Thread cutting head with chaser jaws, thread cutting stock, Itodpfx Aob A Rabjfien Tapping machine, pipe thread cutter -Inch thread: 1/2"-3/4" inch -Weight: 4.5 kg