Used Torque Multiplier for sale (2,775)

Condition: used, Year of construction: 2010, A KERN 5-axis CNC machining center with EROWA Robot Compact is offered. Travel X/Y/Z: 500mm/500mm/400mm, simultaneous 5-axis machining, hydrostatic guideways in the X and Y axes, swivel range: -10° to +110°, feed rate X/Y/Z: 30m/min, max. acceleration: 10m/s², max. spindle speed: 40000rpm, spindle power: 37kW, max. torque: 12000rpm, tool taper: HSK-E40, tool magazine: 50, tool change time: approx. 3s, control: Heidenhain iTNC 530 , laser tool measurement, workpiece touch probe, EROWA PowerChuck P, EROWA Robot Compact year of manufacture 2013 with 70 magazine positions, including 55 positions ITS 72 and 15 positions ITS 148, max. transfer weight pallet incl. workpiece: 30kg, automatic loading and unloading of the magazine also possible during machining, machining medium: oil, belt filter system and max. high-pressure supply 80bar, oil mist extraction system and fire extinguishing system available, machine power-on hours: approx. 86589h, spindle operating hours: approx. 66997h. The machine is available from November 2026. Documentation available. Inspection possible by arrangement. Kodpszu Szmsfx Abnsdr

Condition: used, Year of construction: 2004, functionality: fully functional, turning length: 1,000 mm, turning diameter over cross slide: 350 mm, TECHNICAL DATA Turning diameter: max. 465 mm Turning length: 1050 mm Diameter when turning: 680 mm Chuck diameter: 325 mm X-axis travel: 300 mm Z-axis travel: 1050 mm Control system: Fanuc Series 21I-TB Spindle speed range: Max. 3500 rpm Drive power: 33 kW Torque: max. 630 Nm Bearing diameter in the spindle: 120 mm Max. bar diameter: 90 mm Tailstock stroke: 850 mm Tool post stroke: 150 mm Kodpfx Absv Epzvsnjdr Rapid traverse X/Z: 30 m/min Number of tool positions: 12 positions Tool holder: VDI 40 Accessories: Chip conveyor Tool holders, chuck jaws

Condition: good (used), Year of construction: 2011, functionality: fully functional, Technical details x-travel 1600 mm y-travel 1250 mm z-travel 1600 mm B-axis (table) 360.000 x 0,001° deg milling-head swivable +/- (HV) 360.000° deg pallet size: 1000 x 800 mm table load 3000 kg tool taper SK 50-B Plananlage 125 spindle turning speed range max. 8000 U/min transmission ratio 2 spindle drive (100/40 % ED) 37/50 kW feeds x/y/z -stepless 30000 mm/min max. torque on the spindle 1410/2000 (100/40 % ED) Nm total power requirement 100 kVA dimensions of the machine ca. 11555 x 7998 x 5050 mm Additional information Kdjdpfxozvm Hye Abner Universal machining center 5 axes simultaneously Original purchase price: EUR 1.295.000,- First machine installation in September 2011. A geometry measurement report (dated 30. August 2025) is available. Equipment: CNC-control Siemens 840D Solution Line Separate handheld control unit, wired, Siemens HT-2 2-station pallet changer with safety light barrier 110-position tool changer (max. tool length 600 mm) with 2nd Siemens 840 D control panel Tool taper cleaning system Special cabin with oil mist extraction system Coolant tank 3.300 liters, pump pressure 4 bar/50 bar (Q1/Q2) Chip conveyor Workpiece measuring probe Manual books Spare part: New ball screw. Note: The machine will be sold without tool holders, tools, and clamping devices.

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, screw diameter: 172 mm, rotational speed (max.): 49 rpm, In recent years, over €420,000 have been invested in new components and factory refurbishments! Further technical details can be found in the attached documentation. TECHNICAL DETAILS Screw diameter: 172 mm Screw speed: 4.9 - 49 rpm Max. torque: 17,500 Nm MACHINE DETAILS Main motor: 216 kW Gearbox manufacturer: P.I.V Coperion DSE 180 TECHNICAL DETAILS Power: 7.5 kW Output torque: 280 Nm Degassing chamber: 1 Screw housing bore: Ø 181.5 mm Screw diameter: 180 mm Kdjdpfoztu Dbex Abner Pressure build-up (axial pressure on the screw shaft): max. 25 bar EQUIPMENT Double screw degassing unit Coperion DSE 180, year 2021 Main gearbox P.I.V, year 2002, factory refurbished in 2021, unused Main gearbox P.I.V, year 1986, factory refurbished in 2016, in operation 2021 - 2023 Main motors Siemens, 212 kW, year 2002, factory refurbished in 2020, unused Main motors Siemens, 212 kW, year 1986, factory refurbished in 2015, in operation 2020 - 2023 Screw housings, 16 various, new and used Screw shafts, 2 x approx. 4,600 mm Supports Screw tips Thrust discs Note: The electrical and control technology as well as the screw segments are not included in the scope of delivery.

Condition: ready for operation (used), Year of construction: 2015, CNC Control: F31iA X mm: 560 Y mm: 560 Z mm: 630 B mm: 360.000 Table load capacity kg: 400 Cutting feed rate mm/min X, Y, Z: 50,000 Maximum rapid traverse rate m/min X, Y, Z: 50 Spindle speed rpm: 14,000 Kdedpfx Abszu Trysner Spindle power kW: 18.5 Taper type: ISO-40 Torque Nm: 120 Tool changer type: Chain Number of positions in tool changer: 60 Maximum tool diameter: mm 70 Maximum tool diameter with adjacent positions empty: 140 Maximum tool length mm: 400 Maximum tool weight kg: 8 Coolant tank capacity l: 500 Through-spindle coolant: Yes

Condition: good (used), Year of construction: 2025, Universal machining center Machine type: DMG Mori DMX 60 U Control: Siemens Sinumerik One mit Celos X Year: 2025 SPECIFICATIONS X-Axis: 600 mm Y-Axis: 600 mm Z-Axis: 510 mm B-Axes: -15°/+110° C-Axis: 360° Rapid motion: (X/Y/Z): 42 m/min. Kedpfjzu R D Tjx Abnsdr Spindle speeds: 20 -15.000 rpm Spindle power: 20 / 14,5 kW Torque: 121 Nm Tool: SK 40 Tool capacity: 60 NC-panning and rotary Table Table size: 630 x 500 mm Equipment Chip conveyor Production Package Internal cooling: 40 bar Cooling tank: 600 l paper band filter Electronical handwheel Direct linear scales Preparation for Hydraulic and Pneumatic Connections Air blow Oil mist separator Caliper: Renishaw PP40 3D-Touch probe: 3d quickSET Working mode: 4

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, * Mori Seiki NL 2500 SY. * Year 2009. * Y-axis. * C-axis. * 5-axis machine. * 1.5-meter Lns Quick Load bar loader. * Sub-spindle. * 12-station turret, all stations motorized. * Y-axis travel: ±60 mm. * C-axis on both spindles. * Integrated main spindle motor: 18 kW. * Integrated sub-spindle motor: 15 kW. * Direct-drive motor for powered tools: 5.5 kW. * Motor starting torque: 640 N·m. * Motors without belts or gear stages. * Main spindle size: A2-8. * Sub-spindle size: A2-6. * Bar capacity: 80 mm. * 250 mm Kitagawa B-210 main spindle chuck with metric system. * 210 mm Kitagawa B-208 sub-spindle chuck with metric system. * Prismatic guides on all axes. * Main spindle speed: 4,000 rpm. * Motorized tool speed: 6,000 rpm. * Daikin oil cooler for both spindles. * Mapps 4 conversational automatic programming system. * Automatic force control and tool wear monitor. * Rapid traverse speed: 30 m/min on the X and Z axes. * Turret indexing time: 0.2 seconds. * Two Renishaw arms for automatic tool measurement. * Communication ports via USB, PCMCIA card, and RS-232. * Installation interface for bar loader. * Automatic workpiece collector. * Dual pedal for independent opening and closing of the main spindle and sub-spindle. * Side-mounted hinged chip extractor. Kdedpfxozuxm Ae Abner * Extensive range of static and motorized tool holders. * Electrical transformer. * Documentation, parts list, electrical schematics, programming, and operating manual. * Weight: 5,800 kg. * Machine is currently in operation. * It is essential to check the precision videos. * Immediate delivery, unless sold immediately.

Condition: excellent (used), Year of construction: 2020, operating hours: 23,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 120 m/min, rapid traverse Y-axis: 120 m/min, rapid traverse Z-axis: 120 m/min, torque: 80 Nm, controller manufacturer: Siemens, controller model: Sinumerik 840 D SL Solution Line mit NCU 730, workpiece diameter (max.): 1,830 mm, workpiece weight (max.): 800 kg, total height: 3,500 mm, total length: 5,900 mm, total width: 3,990 mm, overall weight: 24,500 kg, spindle speed (min.): 1 rpm, spindle speed (max.): 17,500 rpm, operating hours of spindle: 8,000 h, Equipment: chip conveyor, Horizontal double swivel-beam machining center with 2 spindles - Linear and torque motors in the feed axes - Gantry drive for the Y-axis - Independent Z-axes and X-axes - Double swivel beam with two integrated rotary axes for loading and unloading parallel to main processing time - Siemens Sinumerik 840 D SL Solution Line control with NCU 730 - Oil distributor for NC rotary table - 1 set of clamping bridge supports - Torsion compensation - 5th axis directly driven twice - Boring head indexing - Base module for clamping hydraulics - Pneumatic pressure intensifier - Scraper belt conveyor - Automatic loading door - Emulsion mist extraction unit - Automatic rinsing cycle for loading area Kdodpfxew Hgk Ae Abnsr - Tool flatness monitoring - Position monitoring, base module and extension - Grating/walk-on grid - 24 quick-release couplings SW-ID No. 413288 - Tool breakage monitoring, inductive etc.

Condition: used, Year of construction: 1997, functionality: fully functional, clearance between the columns: 480 mm, total height: 2,040 mm, total width: 1,750 mm, stroke length: 460 mm, total length: 5,177 mm, column diameter: 90 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 9,500 kg, clamping force: 2,000 kN, power: 18 kW (24.47 HP), input frequency: 50 Hz, Equipment: documentation/manual, We are offering this used Italpresse IP 200 SC die-casting machine, manufactured in 1997. Type: IP 200 SC Manufacturing number: 2449 Year of manufacture: 11.1997 Wiring diagram no.: 147081052 Operating voltage: 400 V Mains frequency: 50 Hz Kdedpezlw N Rsfx Abner Auxiliary power supply: 110VAC–24VDC Control voltage inputs: 24 VDC Control voltage outputs: 24 VDC Power consumption: 18 kW Installed power: 23 kW Enclosure protection class: IP55 Hydraulic pump: Vickers 4525V42A17 – 86DD 22R Pressure accumulator TÜV certificate: Last inspection in 2018, next inspection due on 01.08.2028. In recent years, extensive investments have been made in the technology to ensure reliability: 2024: Installation of a new column including nut. 2023: Replacement of various wear parts (column wiper, slide rails/slide shoes including wiper) as well as complete seal kits for the closing cylinder and multiplier. 2021: Installation of new pump inserts for high and low pressure. The machine will be sold including a Gauss VS1 dosing unit with a separate, compact control panel and a gas-operated melting furnace with a 200-liter crucible and a Hindenlang gas burner (type HO-3). Original manual and complete electrical and pneumatic diagrams are available. The machine is currently still in active production. Since it is in operation, the operating hours cannot be read exactly, but an inspection under power is possible at any time by arrangement. The machine will be disconnected at the end of September / beginning of October. If you have any questions or require further information, please send us a message or call us.

Condition: used, Year of construction: 2014, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 32 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 35 kVA, torque: 154 Nm, controller manufacturer: Heidenhain, controller model: iTNC 530, table load: 900 kg, rotary table diameter: 600 mm, rotational speed (max.): 50 rpm, overall weight: 9,000 kg, spindle speed (max.): 14,000 rpm, coolant supply: 40 bar, spindle motor power: 32,000 W, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-axis machining center with proven Heidenhain iTNC530 HSCI, M&H workpiece probe, 40 bar internal coolant supply with belt filter The machine is still under power and can be inspected near Straubing. Spindle hours: 10,500 h Milling swivel head: - With torque motor and hydraulic clamping - Swivel range +30/-120°, infinitely variable - 14,000 rpm - 160 Nm torque - Drive power 29 kW - Separate spindle cooling for constant temperature - Tool holder DIN SK40 with blow-out function Integrated rotary table: Ksdeyzd Eyopfx Abnjdr - With torque motor and hydraulic clamping - Ø 610 mm - Extended clamping surface 1,100 x 610 mm General: - Heidenhain glass scales in all 5 axes - 40-position tool changer with double arm gripper - Coolant and compressed air gun - Chip conveyor - Coolant system - Electronic handwheel - Work area lighting

Condition: excellent (used), Year of construction: 2012, operating hours: 20,101 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, nominal power (apparent): 70 kVA, controller manufacturer: Siemens, controller model: 3D-Control Siemens 840D, workpiece height (max.): 525 mm, workpiece diameter (max.): 500 mm, workpiece weight (max.): 240 kg, total height: 2,800 mm, total length: 4,700 mm, total width: 6,000 mm, table load: 240 kg, rotary table diameter: 500 mm, overall weight: 12,000 kg, spindle speed (min.): 18,000 rpm, operating hours of spindle: 20,101 h, coolant supply: 40 bar, number of slots in tool magazine: 60, tool length: 300 mm, tool weight: 6,000 g, Equipment: chip conveyor, documentation/manual, CNC controller: 3D-Control Siemens 840D Axes X-axis travel mm: 600 Y-axis travel mm: 500 Z-axis travel mm: 500 C-axis degrees: 360º (0,001) B-axis degrees: -5 / +110º Distance spindle nose - table surface mm: 600 Feed rates m/min: 80 Rapid traverse m/min: 80 Acceleration in the axes m/s2: 10 Worktable Number of pallets: 2 Table dimensions mm: 500x500 Maximum workpiece size (D x H) mm: 500x525 Max. workpiece weight kg: 240 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 (40/100%ED Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 Tool system Tool holder: HSK-A 63 Tool magazine slots: 60 Tool changer: Double gripper With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Kodpfx Aezd Agrsbnjdr Max tool weight kg: 6 Chip-to-chip time s: 4.5 Equipment Electronic Handwheel Chip conveyor Infrared probe Rinsing gun Mist collector Programmable coolant nozzles DXF import function Internal coolant supply Electrical cabinet active cooling unit Temperature compensation Paper band filter DMG AUTOshutdown DMG GREENmode DMG MACHINEcheck High-Speedd-Setting DMG Netservice-client DMG Service Agent Machine running times Under power: 35687 Spindle Working: 20101 Rated power kVA: 70 Basic machine dimensions / weight Length mm: 4700 Width mm: 6000 Height mm: 2800 Weight kg: 12000

Condition: ready for operation (used), Year of construction: 2019, operating hours: 3,716 h, travel distance X-axis: 260 mm, travel distance Y-axis: 40 mm, travel distance Z-axis: 610 mm, total height: 2,060 mm, total width: 3,450 mm, overall weight: 6,500 kg, controller manufacturer: SIEMENS, product length (max.): 2,800 mm, number of axes: 3, This 3-axis EMCO Emcoturn 65 was manufactured in 2019. It features a maximum machining diameter of Ø500 mm and a maximum machining length of 520 mm. The machine offers an impressive X-axis travel of 260 mm and Z-axis travel of 610 mm. If you are looking to get high-quality turning capabilities, consider the EMCO Emcoturn 65 horizontal turning machine we have for sale. Contact us for further details. • Number of spindles: 2 • Spindle motor power: Main spindle: 17 / 22 kW; Counter spindle: 11 / 16.5 kW • Spindle speed range: 60 – 5000 rpm • Spindle bore: Ø73 mm • Number of tool slots: 12 • Rotating tools: yes • Lubrication tank: 10 l • Pump drive power: 0.57 / 2.2 kW • Air pressure: 6 bar • Cooling pressure: 3.5 bar (optional 14 bar) • Air supply: 5 l/min • Swing over bed: Ø610 mm • Swing over cross slide: Ø360 mm • Distance between centers: 682 mm • Distance between spindle noses: 840 mm • Max. machining diameter: Ø500 mm • Max. machining length: 520 mm • Max. bar capacity: Ø65 mm • Main spindle spindle nose: A2-6 • Main spindle bearing Ø: 105 mm • Main spindle torque (40% DC): 305 Nm • Max. chuck size: Ø250 mm • Counter spindle torque (40% DC): 80 / 125 Nm • Counter spindle spindle nose: A2-6 • Counter spindle max. chuck: Ø200 mm • C-axis resolution: 0.001° • Turret type: VDI30 • Turret max. speed: 5000 rpm • Turret max. power: 6.7 kW • Turret max. torque: 25 Nm • Turret indexing time: 0.2 s Kedpfx Absztc Rcsnedr • Rotary tools: VDI30 • Rotary tools speed: 0 – 5000 rpm • Rotary tools torque: 25 Nm • Rotary tools power: 6.7 kW • Coolant system tank capacity: 230 l • Coolant system flow rate: 15 / 65 l/min • Hydraulic unit max pressure: 50 bar Technical Specification Through-spindle Coolant No Counter Spindle No Driven Tools No

Condition: used, Year of construction: 2005, operating hours: 8,900 h, power: 109 kW (148.20 HP), Equipment: ABS, air conditioning, all wheel drive, cabin, Weight: 5,868 kg Length: 4,692 mm Width: 2,507 mm Kdodpfewlmt Isx Abnsr Height: 2,997 mm Wheelbase: 2,723 mm Rated power: 105.9 kW, 144 hp Rated speed: 2,200 rpm Number of cylinders: 6 Displacement: 7,480 cc Torque rise: 51.3 l/100 km All-wheel drive

Condition: used, functionality: fully functional, Year of construction: 2005, operating hours: 7,265 h, load capacity: 5,000 kg, lifting height: 6,000 mm, free lift: 2,100 mm, fuel type: gas, mast type: simplex, construction height: 3,030 mm, fork carriage width: 1,150 mm, fork length: 1,300 mm, empty load weight: 7,650 kg, total length: 3,350 mm, drive type: Treibgas, construction width: 1,450 mm, LPG forklift Load center: 600 mm Fork width: 130 mm Fork thickness: 70 mm ISO class: ISO Class 4 = 5,000 - 10,000 kg Mast type: Standard Transmission: Torque converter Speed class: 15 Condition: Ready for operation and fully functional Technical condition: Very good Front tire type: Super elastic Front tire size: 300-15 Kdsdjy Hm Rpopfx Abnjr Rear tire type: Super elastic Rear tire size: 7.00-12 Description: Read operating hours, inspection by appointment, transport option available. For further questions, please call. Side shifter, third valve, rear working light, front working light, canopy, full free lift, interior mirror, single pedal, seat,

Condition: used, Year of construction: 1999, operating hours: 3,400 h, machine/vehicle number: 261724855, TRACTOTECHNIK GRUNODRILL 10S Year: 1999 Operating hours: Meter reading - Borehole diameter: max. 385 mm - Maximum torque: 2500 kN - Tensile force: 96 kN - Compressive force: 65 kN - Max. drilling length: 250 m - Power: 90 kW - Drilling rods and bits included - Complete equipment with separate motor, hydraulic unit and tank for drilling fluid - Motor: Perkins 119 kW / 162 hp Kdodpfxehd I S Uo Abnor This offer is subject to change; errors and omissions excepted. Only the specific agreements in the order confirmation or purchase agreement are valid. The basis for this contract is exclusively our General Terms and Conditions (GTC). These can be accessed at any time on our website or can be requested from us. The place of jurisdiction is Eberswalde, Germany. If you have any questions, please do not hesitate to contact me. Further information: Intended use: Construction

Condition: excellent (used), Year of construction: 2012, GILDEMEISTER - CTX 310 eco V3, year of manufacture 2012, spindle hours approx. 8000 hours Ksdpfx Aezumn Usbnedr Turning diameter 210 mm Turning length 580 mm Control system 840 D Siemens Center height 190 mm Turning diameter over the bed 330 mm Turning diameter over the compound slide 260 mm Spindle speed range - main spindle max. 4,000 rpm Drive power - main spindle 10 / 7.5 kW Max. torque 115 / 86 Nm Spindle bore 68.5 mm Usable bar diameter 51 mm C-axis 0.001 ° Travel - x 185 mm Travel - z 455 mm Number of tool positions 12 Tool holder VDI 30 Driven tool stations: 6 Tailstock travel 400 mm - Chuck including various jaws - 12 VDI 30 tool holders - Driven tools: none - Chip conveyor

Condition: excellent (used), Year of construction: 2019, operating hours: 29,081 h, functionality: fully functional, CNC control HEIDENHAIN TNC 640, 15" Main computer MC Controller unit CC Keyboard TE 15" TFT color flat screen with softkeys RAM: 4 GB Hard disk: 32 GB, of which at least 21 GB program memory Input resolution / display increment linear axes: up to 0.1 µm Input resolution / display increment rotary axes: up to 0.0001° Input range: max. 99,999.9999 mm or 99,999.9999° Circular interpolation in 3 axes with tilted machining plane Kdodjyrndmjpfx Abnsr Helical interpolation Linear interpolation in 5 axes Block processing time: 0.5 ms Ethernet: 2 x 1000BaseT USB: 1 x front USB 2.0, 4 x rear USB 3.0 Handwheel HEIDENHAIN HR510 Axis selection via buttons / softkeys Buttons for continuous axis movement Emergency stop button Magnetic attachment Enable buttons / dead man's buttons according to CE Travel ranges X-axis / longitudinal axis: 4,000 mm Y-axis / transverse axis: 2,500 mm Z-axis / vertical axis: 1,300 mm Feed / connection / pneumatics Max. feed rate interpolating axes: 40 m/min Installed power: 60 kVA Max. power consumption: 150 A Air requirement pneumatics: 400 Nl/min Working pressure pneumatics: 6 bar Machine table / floor plate Machine table recessed, with leveling units Table size: 2,500 x 4,000 mm Table height: 300 mm Load capacity: 10 t/m² T-slot width: 28 H12 mm T-slot spacing: 250 mm Milling head / universal milling head Universal milling head with continuous movement in 2 axes 5-axis machining Direct drives for rotary axes Rotary axes as interpolated CNC axes Automatic tool clamping Undercut machining up to 10° possible Integrated cooling of the torque motors and spindle bearings C-axis swivel range: +/- 270° A-axis swivel range: +/- 185° Max. speed A/C axes: 30 rpm Working torque A/C axes: 450 Nm Clamping torque axes: 1,400 Nm Positioning accuracy A/C axes: 8 arcsec Positioning repeatability A/C axes: 4 arcsec Main spindle Spindle power S1 / S6: 22 / 33 kW Spindle torque S1 / S6: 84 / 128 Nm Max. spindle speed: 18,000 rpm Constant power: 2,500 - 18,000 rpm Constant torque: 10 - 2,500 rpm Tool holder: HSK-A63 DIN 69893 Rigid tapping for electric spindle Software / calibration Dynamic RTCP software AUTOCAL software for automatic calibration 3D Form Inspect M&H software Software for measuring 3D shapes, tools, molds and dies Measurement program creation directly via coordinate points / surface points Vibration / collision monitoring Sensor for detecting vibrations Detection of collisions and excessive vibrations on 3 axes Reaction time approx. 1 ms Electronic interface for functional testing Tool changer Tool changer with arm for tool changes Overlapped-wheel design Full enclosure for operator safety Tool positions: 80 Max. tool diameter: 75 mm Max. tool diameter with free adjacent positions: 125 mm Max. tool weight: 10 kg Max. tool length: 600 mm for 40 tools Max. tool length: 250 mm for 40 tools Tool type: HSK-A63 DIN 69893

Condition: used, Year of construction: 1998, functionality: fully functional, DECKEL MAHO - DMU 125 T Offer Details Stock Number 1039-8700 Machine Type Machining Center - Vertical Manufacturer DECKEL MAHO Type DMU 125 T Year of Manufacture 1998 Control TNC 426 Heidenhain Location D-59302 Oelde Country of Origin Germany Delivery Time Upon Agreement Incoterms EXW (Ex Works) Additional Information CNC - Vertical Machining Center DECKEL MAHO - DMU 125 T - Coolant Through Spindle (CTS) Kedozfzhdepfx Abnedr Technical Details X-axis travel 1,250 mm Y-axis travel 880 mm Z-axis travel 800 mm Control TNC 426 Heidenhain Main Spindle: Spindle Speed Range - Main Spindle max. 12,000 min/-1 Drive Power - Main Spindle 15 / 10 kW Max. Torque 500 Nm Tool Interface SK 40 Work Table: Table Surface Area 1,500 x 1,050 mm Max. Table Load 2,500 kg Number of T-slots 10 T-slot Width 18 H7 mm T-slot Spacing 100 mm Tool Changer: Number of Tool Positions 30 Max. Tool Diameter 80 mm Max. Tool Diameter with Free Neighboring Position 160 mm Max. Tool Length 315 mm Max. Tool Weight 8 kg Max. Total Weight 100 kg Feeds: Rapid Traverse (X / Y / Z) 15 m/min Feed Rate 10,000 mm/min Total Power Consumption 29 kW Machine Weight approx. 16.0 t Space Requirement approx. 7.0 x 5.0 x 3.3 m Accessories Documentation Chip Conveyor Coolant System High-Pressure Cooling Internal Coolant Supply Tool Changer Measuring Probe Heidenhain Electric Handwheel

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 135 mm, displacement volume: 8,870 cm³, injection pressure: 1,640 bar, Stock No.: 503583 Manufacturer: ENGEL Type: ES 16050-800 DUO Controller: CC 200 Year of manufacture: 2007 Operating hours: 91708 h Technical Data, Clamping Unit Clamping force: 8000 kN Tie bar distance h x v: 1170 x 1000 mm Platen size h x v: 1550 x 1520 mm Minimum mounting height: 500 mm Maximum mounting height: 1100 mm Maximum platen distance: 2100 mm Opening stroke: 1600 mm Ejector stroke: 300 mm Ejector force: 180 kN Centering of moving platen D: 200 mm Centering of fixed platen D: 200 mm Tool weight: 21600 kg Technical Data, Injection Unit Screw diameter: 135 mm Ksdpfxjzgt Rtj Abnsdr Injection volume: 8870 ccm Injection pressure: 1640 bar Screw length: 22 l/d Screw stroke: 620 mm Screw speed: 100 rpm Screw torque: 14000 N Free injection flow rate: 1245 g/s PS Number of heating zones: 7 Nozzle stroke: 950 mm Dimensions & Weight Machine dimensions L x W x H: 11.81 m x 3.2 m x 2.9 m Total weight: 56000 KG Equipment Screen text German Screen text English CEE socket 16A CEE socket 16A CEE socket 16A Compact Flash drive Hydraulic core pull 1x Machine including handling system Machine including safety enclosure Machine with water manifold Interface EUROMAP 12 Interface for handling system USB interface Tool heating 16x Technical Data, Handling System Machine type: Linear Manufacturer: ENGEL Controller: ERC 64/1-F Year of manufacture: 2007 Handling system weight: 25 kg X-axis: 1300 mm Y-axis: 2200 mm Z-axis: 4760 mm

Condition: like new (used), Year of construction: 2018, functionality: fully functional, turning length: 520 mm, turning diameter over cross slide: 673 mm, turning diameter: 313 mm, spindle motor power: 26,000 W, spindle speed (max.): 4,000 rpm, spindle bore: 75 mm, rapid traverse X-axis: 38 m/min, rapid traverse Y-axis: 38 m/min, rapid traverse Z-axis: 38 m/min, total height: 2,123 mm, total length: 3,257 mm, total width: 2,312 mm, spindle nose: 6, overall weight: 8,118 kg, spindle diameter: 250 mm, CNC Fanuc 31i TURNING SWING DIAMETER Over guide cover: 673 mm WORKING AREA Chuck size: 250 mm Bar capacity: 65 mm Maximum turning diameter: 313,7 mm Maximum turning length: 520,7 mm MAIN SPINDLE Maximum spindle speed: 4.000 rpm Maximum motor power: 26 kW Maximum torque: 421 Nm Base spindle speed: 590 rpm Spindle nose: A2-6 / 25C Spindle bore: 75 mm Maximum 3-jaw chuck size: 250 mm Spindle orientation: 1° SUB-SPINDLE Maximum spindle speed: 5.000 rpm Maximum torque: 347 Nm Base spindle speed: 420 rpm Maximum motor power: 11 kW Spindle nose: A2-6 / 20C Chuck size: 200 mm Bar capacity: 51 mm Spindle bore: 60,4 mm Spindle orientation: 1° Maximum stroke: 638 mm Maximum rapid traverse: 38 m/min Maximum distance between sub-spindle and main spindle: 654,1 mm COOLANT SYSTEM Tank capacity: 254 L Maximum pressure: 13,8 bar High-pressure coolant through turret: 68,95 bar ADDITIONAL FEATURES Resolution: 0,0001 mm Machine length: 3.257 mm Machine depth: 2.312.4 mm Machine height: 2.123 mm Machine weight: 8.118 kg Machine equipped with: • SUPER-PRECISION® certification • Air blast on main spindle • 20C collet spindle • Custom Macro B programming • Reinforced HARCRETE® machine base • Grease lubrication on all axes • Optical scales on X, Y and Z axes • 12-bar through-tool coolant system • Parts counter and operating hours counter • Axis resolution: 0.00010 mm • Maintenance kit • Manual Guide i (programming system) • Rigid tapping (without compensation holder) • Laser measurement system with Renishaw ball probe • Live tooling, Y-axis and 20C sub-spindle option Configuration includes: Kdedpfxjzbicvs Abnor • Sub-spindle • 12-station BMT-55 tool turret with live tooling drive • C-axis on both main spindle and sub-spindle • Y-axis • Optical scale on Y-axis • Ready To Cut option (Warm-up Cycle – Automatic Start) • MARPOSS workpiece probe for BMT-55 • MARPOSS tool setter • Workpiece presence detection in the sub-spindle • Chip conveyor – discharge on the right-hand side of the machine (interface included) • High-pressure coolant system • Spindle reduction sleeve kit • Operating and maintenance manuals and CE Declaration of Conformity

Condition: like new (used), Year of construction: 2024, operating hours: 260 h, functionality: fully functional, overall weight: 73 kg, load capacity: 20 kg, arm reach: 1,700 mm, pivoting range: 360 °, controller manufacturer: Doosan Robotics, controller model: DSC, teach pendant manufacturer: Doosan Robotics, teach pendant model: TP, input voltage: 220 V, input current: 6 A, type of input current: AC, repeat accuracy: 0.05 mm, Doosan Robotics H2017 Collaborative Robot (Cobot) – 20 kg payload, 1700 mm reach. Ksdpfx Ajzia Evsbnedr The robot has been used for laser welding and is in as-new condition with only 260 operating hours. It is fully functional and ready for immediate deployment. The robot is delivered complete with a stand, which is included in the price. The stand is designed to be easily moved with a pallet jack, allowing flexible positioning in the production environment. The laser welder (Gweike 1500W) is available as an add-on for 15,000 EUR – contact us for more information. Please note: The robot is not CE certified in its current configuration. Technical specifications: - Payload: 20 kg - Reach: 1700 mm - Degrees of freedom: 6 - Repeat accuracy: ±0.05 mm - Robot weight: 73 kg - Input voltage: 220V AC - Protection rating: IP54 (robot body) - Controller: Doosan Smart Controller (DSC) The robot is equipped with built-in force/torque sensing on all 6 joints, enabling safe human-robot collaboration without safety fencing in many applications. It supports Doosan's intuitive programming environment and is compatible with a wide range of end-of-arm tooling and accessories. Suitable for: laser welding, laser cutting, machine tending, palletizing, assembly, material handling, and other industrial applications.

Condition: good (used), Year of construction: 2008, functionality: fully functional, A fully automatic round capper from ALWID is offered of the type FAVORIT 4SK The details of the machine: - Stainless steel design (frame, paneling, etc.) - Fully automatic cap sorting and cap feed - 4 screwing heads with magnetic coupling and torque setting - The machine is suitable for line integration - Output: 2,000 - 8,000 bottles / h Kdsdpstlttfsfx Abnor - Bottle height: 90 - 300mm - Suitable for plastic screw caps (three formats available) The machine was used to process glass and plastic bottles with plastic screw caps. The machine is currently not in use and can be viewed at the production site in Thuringia by arrangement. The machine layout including dimensions is attached as a PDF document.

Condition: refurbished (used), Year of construction: 1991, functionality: fully functional, feed length X-axis: 1,400 mm, feed length Y-axis: 670 mm, feed length Z-axis: 500 mm, travel distance X-axis: 1,800 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 1,440 rpm, spindle speed (min.): 1,440 rpm, quill travel distance: 100 mm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 4 m/min, rapid traverse Z-axis: 1 m/min, total height: 2,620 mm, total width: 3,475 mm, total length: 3,200 mm, table width: 630 mm, table length: 1,800 mm, position of the milling head: VERTIKÁLNÍ/HORIZONTÁLNÍ, type of input current: three-phase, rotational speed (min.): 18 rpm, table load: 1,200 kg, overall weight: 6,500 kg, workpiece weight (max.): 1,200 kg, bed width: 630 mm, Console Milling Machine Horizontal/Vertical Axis Milling New Electrical Cabinet + Control Panel Axis Digital Readout Complete Overhaul Performed in 2025 Warranty: 12 months Availability: IMMEDIATELY AVAILABLE CONDITION OF A NEW MACHINE – COMPLETE OVERHAUL IN GEOMETRICAL ACCURACY ACCORDING TO MANUFACTURER’S SPECIFICATION FGSV 50 – Technical Data: Basic Machine Data: Manufacturer: TOS Kuřim Overall length: 3,200 mm Overall width: 3,475 mm Overall height: 2,620 mm Total weight: 6,500 kg Total power consumption: 23 kVA Working range: Ksdpfexp Itbjx Abnedr Longitudinal travel X-axis: 1,400 mm Cross travel Y-axis: 670 mm Vertical travel Z-axis: 500 mm Working spindle: Spindle taper: ISO 50 Number of speeds / speed range: 18 / 35.5 – 1,440 rpm Spindle motor power: 15 kW Max. spindle torque: 2,000 Nm Feed range X – Y / Z: Number of steps / range: 16 / 10 – 1,800 / 2.5 – 450 mm/min Rapid traverse: 4,000 / 1,000 mm/min Table: Table area (width x length): 630 x 1,800 mm Max. table load (along axis): 1,200 kg Details of the performed overhaul available upon request.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: AF83F-60133, Year of construction: 2007, operating hours: 1,432 h, load capacity: 3,300 kg, lifting height: 4,420 mm, free lift: 1,600 mm, load center: 500 mm, fuel type: gas, mast type: triplex, construction height: 2,110 mm, gearing type: converter, DGUV certified until: 01/2027, fork length: 1,150 mm, tire condition: 80 %, front tire type: cushion tires (black), rear tire type: cushion tires (black), overall weight: 3,300 kg, empty load weight: 3,300 kg, total height: 2,110 mm, color: green, Equipment: CE marking, UVV, lighting, pallet forks, Price: €10,000 net €11,900 gross SKU: 316 Basic information: - Manufacturer: Mitsubishi - Model: FGC33NY - Year of manufacture: 2007 - Operating hours: 1432h Technical data: - Drive: LPG (liquefied petroleum gas) - Transmission: Torque converter - Pedals: Single-pedal control - Control system: Solopilot - Battery: - Charger: Mast and dimensions: - Overall height: 2110 mm - Lifting height: 4420 mm - Free lift: 1600 mm - Mast type: Triplex mast - Fork length: 1150 mm Kjdpfx Aoyftchjbnjdr - Rated load capacity: 3300 kg - Load center: 500 mm Tires: - Type: Cushion tires Hydraulic equipment: - Side shifter: Available upon request - Fork positioner: No - Turret truck: No - Auxiliary hydraulics: Equipment: - Body: Overhead guard with roof panel - Lighting: 2x front - Safety equipment: Seat belt - Heater: No Extras: - UVV inspection can be performed upon request - Ready for immediate use - Inspection and test drive can be arranged on-site by appointment. Transport: Cost-effective shipping possible upon request. Invoice with VAT: You will always receive an invoice with VAT shown. Battery: For battery-powered equipment, we will gladly provide you with a quote including a new battery. Contact: If you have any questions or are interested, please contact us by phone, email, or contact form.

Condition: used, Year of construction: 2005, functionality: fully functional, turning diameter over cross slide: 500 mm, turning diameter: 800 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 2,500 rpm, travel distance X-axis: 382 mm, travel distance Y-axis: 65 mm, travel distance Z-axis: 2,100 mm, rotational speed (max.): 2,500 rpm, rotational speed (min.): 20 rpm, torque: 2,200 Nm, overall weight: 12,800 kg, CNC FANUC 180i with 3D software WORK AREA: Maximum turning diameter: 800 mm Turning diameter above the cross slide: 500 mm Ksdpfxezuy H De Abnodr X-axis travel: 382 mm Y-axis travel: ± 65 mm Z-axis travel: 2,100 mm MAIN ELECTRIC SPINDLE: Spindle housing: 300 mm high, 5 mm Bar capacity: 121 mm Power (40/100% ED): 43/33 kW Torque (40/100% ED): 2,200/1,700 Nm Rotation speed: 20 - 2,500 rpm AXIS FEED RATES: Rapid traverse speed X/Z: 60/35 m/min TOOL TURRET: Number of tool stations: 12+6 Number of powered tools: 12 Tool holder according to DIN 69880: 50 mm Power (40% ED): 15.7 kW Torque (40% ED): 50 Nm Rotation speed: 3,500 rpm Maximum clamping collet diameter: 26 mm TAILSTOCK: Sleeve travel: 150 mm Center mounting: CM 5 Maximum sleeve thrust: 1,800 daN Machine weight: 12,800 kg Machine complete with: -Steady rest -Set of fixed and powered tool holders -Operating manuals and CE declaration Year of manufacture: 2005