Used Torque Multiplier for sale (2,677)

Condition: not inspected (used), Year of construction: 2015, functionality: unexamined, Schatz torque adapter, 2000 Nm in wooden crate, untested. Iiodpfx Ahszfxqpsyoh

Condition: new, Year of construction: 2024, functionality: fully functional, spindle bore: 65 mm, spindle speed (max.): 3,000 rpm, spindle nose: A2-6, Drive spindle Speed: 3,000 rpm Power: 11 kW Torque: 320 Nm Chuck diameter: 260 mm Spindle bore: 65 mm Spindle nose: A2-6" Working area Iiodpfjup Slbsx Ahysh Center distance: 1,500 mm Center height: 290 mm Diameter over bed: 570 mm Diameter over slide: 510 mm Tool system Turret: PARAT 4-station turret head RD 3 Tailstock Technology: Manual Center: MK-4 (flying) Equipment Chip management: Chip tray Coolant supply: Coolant pump 7 bar

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: Custom made, type of input current: three-phase, total width: 1,800 mm, total length: 14,650 mm, input voltage: 400 V, input current: 16 A, cutting width (max.): 1,800 mm, 22 C – Finn-Convey Industrial Spreading Line (14.65 m x 1.8 m) – Complete with Air-Flotation Description For sale is a professional-grade Finn-Convey industrial fabric spreading and cutting table line, offered as a complete production-ready system. This system is designed for efficient fabric spreading and preparation in high-volume cutting room operations. It enables controlled handling of heavy fabric rolls, precise layer alignment, and smooth material flow prior to cutting. The line has been operated as part of a dedicated production setup together with a Bergman cross cutting saw (unit 114 A). This combination allows efficient pre-cutting of fabric rolls into required lengths before spreading, significantly improving workflow efficiency and reducing manual handling. The equipment has been used in a professional garment factory and was operational prior to factory shutdown. Key Technical Specifications • Total length: 14.65 meters (modular structure, adjustable configuration) • Table width: 1.80 meters (suitable for wide fabrics) Iodpfx Aey Au Alehyoih • Technology: Air-flotation table system for low-friction material handling • Drive system: Motorized side drive units ensuring controlled spreading tension System Components • Finn-Convey motorized side drive units • Industrial air-flotation table structure with perforated surface • Integrated blower system with centrifugal fans under tables • Electrical control cabinet for system operation • Fabric roll handling stands and support assemblies • Integrated end cutting unit with circular blade system Cutting Unit Technical Details • AC speed-controlled motor (Taili Motor Co., Ltd., approx. 90–200W range)14650 • Gear reduction unit (e.g. 5GN-series) for high torque output • Circular cutting blade with integrated sharpening mechanism • Adjustable vertical guide rails for cutting height positioning • Designed for efficient cutting of multi-layer fabric stacks Auxiliary Drive Components • Auxiliary induction motor (e.g. 40W class, speed-controlled) for fine positioning and movement control • Gear-driven transmission for stable and continuous operation • External capacitor-based start system (typical for single-phase auxiliary motors) System Architecture • Modular table construction allowing flexible layout adjustments • Air-assisted material movement reducing friction and operator effort • Cradle-type roll handling enabling tension-free fabric feeding • Encoder-based or mechanical length control depending on configuration • Compatible with upstream roll cutting equipment and manual or semi-automatic workflows Production Advantages • High efficiency with long cutting layouts and reduced material waste • Excellent ergonomics, heavy fabric stacks can be moved with minimal force • Accurate layer alignment supported by controlled drive system • Integrated cutting capability improves workflow continuity • Suitable for a wide range of materials including denim, upholstery, and technical textiles Condition Used industrial condition Removed directly from production after factory shutdown Typical signs of use from industrial environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Location Valga, Estonia Removal & Transport Buyer responsible for dismantling, loading, and transport Professional dismantling strongly recommended due to system size and electrical installation

Condition: used, Year of construction: 2005, operating hours: 8,900 h, power: 109 kW (148.20 HP), Equipment: ABS, air conditioning, all wheel drive, cabin, Weight: 5,868 kg Length: 4,692 mm Width: 2,507 mm Height: 2,997 mm Iodpfx Aowlmt Ishyoih Wheelbase: 2,723 mm Rated power: 105.9 kW, 144 hp Rated speed: 2,200 rpm Number of cylinders: 6 Displacement: 7,480 cc Torque rise: 51.3 l/100 km All-wheel drive

Condition: excellent (used), For measuring the opening and closing torque of screw caps, lids, etc. - Material: Aluminum, robust design - Direction of rotation: Clockwise and counterclockwise - Adjustable: for various bottle and jar sizes - Bottle/jar diameter: 0-115 mm - Measuring range: 0-340 Ncm / 0-30 in-lbs Ijdpfx Ahozat E Esysih - In very good condition

Condition: used, Year of construction: 2015, turning diameter max. 240 mm turning length 470 mm control 840 D sl Operate 4.8 Celos greates pass round over bed 500 mm swing diameter over slide rest 290 mm centre distance 780 mm turning speed range - main spindle max. 6.000 min/-1 power capacity - main spindel 13 / 14 kW max. Torque 171,5 / 192 Nm inner draw tube diameter 52 mm C-Axis 0,001 ° spindle diameter in front bearing 100 mm spindle nose FL 140H5 Spindle speed range subspindle max. 6.000 min/-1 power capacity - Sub spindle 12,6 / 16,2 kW max. Torque 48 / 62 Nm inner draw tube diameter 37 mm C-Axis 0,001 ° spindle diameter in front bearing 90 mm spindle nose FL 140H5 number of toolpositions 12 pos. Number of driven toolspositions 12 pos. tool taper VDI 30 Spindle speed - driven tool stations max. 5.000 min -1 Iedpfxez S Nyaj Ahyoih power capacity - driven tool-stations 4,18 kW max. Torque 16 / 20 Nm y-axis 80 (+/- 40) mm x-axis 145 mm y-axis 80 (+/- 40) mm z-axis 520 mm z2-Axis 550 mm rapid traverse ( X / Y / Z ) 30 / 22,5 / 30 m/min Feed force ( X / Y / Z ) 4,5 / 4,5 / 7,5 kN total power requirement 30 kVA weight of the machine ca. 4,3 t dimensions of the machine ca. 7,0 x 3,0 x 2,2 m CNC - Turning- and MillingCenter DMG GILDEMEISTER - CTX alpha 500 V6 - Only approx. 11,139 spindle hours - External chuck flushing system for the main spindle - External chuck flushing system for the counter-spindle Coolant supply through the counter-spindle - Coolant spray gun - Bar machining package Workpiece unloading device with conveyor belt (left-hand side) for parts up to 51 mm in diameter and 185 mm in length, max. 3 kg Hydraulic hollow clamping system Draw tube inner diameter: max. 52 mm 4-color signal light Connection for bar feeder or bar loading magazine - Preparation for external handling Electrical robot interface (Profibus) Automatic work area door Chuck flushing system with coolant (main spindle)

Condition: used, Year of construction: 2015, turning diameter max. 500 mm turning length 800 mm control sl Operate 3G ShopTurn Siemens swing diameter 500 mm distance between spindles 1.020 mm turning speed range - main spindle max. 5.000 min/-1 power capacity - main spindel 25 / 34 kW max. Torque 280 / 380 Nm spindle head 170h5 spindle diameter in front bearing 130 mm spindle bore 87 mm C-Axis 0,001 ° tool taper HSK 63 A number of toolpositions 80 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 120 mm max. tool weight 12 kg max. tool length 300 mm Speed Milling Spindle max. 12.000 min/-1 power capacity - milling spindle 19 / 22 kW Torque 85 / 100 Nm tool taper HSK 63 A B-Axis +/- 110 ° x-axis -10 ... +490 mm y-axis +/- 100 mm z-axis 1: 845 mm z-axis 2: 600 mm z-axis 3: 800 mm Spindle speed range subspindle max. 6.000 min/-1 power capacity - Sub spindle 20 / 27 kW bar material dia. 51 mm spindle bore diameter 73 mm spindle diameter in front bearing 100 mm C-Axis 0,001 ° total power requirement 85 kVA weight of the machine ca. 10,0 t dimensions of the machine ca. 7,0 x 2,9 x 2,6 m CNC - Turning- and Millingcenter DMG MORI - CTX beta 800 TC V6 - 5-axis simultaneous machining - Main and counter-spindle - Swivel-type milling spindle - ShopTurn - Off-center turning and milling - Multi-thread cycle - Program state control - Tool sorting cycle - Easy Tool Monitor for Siemens control system - Chuck flushing system for main spindle Iijdpfez S Nygsx Ahyjh - Chuck flushing system for counter-spindle - Differential pressure clamping - Coolant supply through the counter-spindle - Bar machining package for CTX beta (77 mm capacity) Workpiece the-take-off device (left side) Hydraulic hollow clamping system 4-color signal tower Interface for bar feeder or bar magazine - In-process workpiece measuring system (Renishaw) - Safety window cleaning system - Coolant spray gun

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 5-axis CNC machining center as a cantilever table design Working area in X = 4375 mm Working area in Y = 1550 mm Working area in Z = 250 mm with 12 kW milling spindle, liquid-cooled 5-axis spindle Homag Drive 5 C+ max. speed 24,000 rpm with torque support Tool holder HSK F-63 18-position disc tool changer 17 drilling spindles, vertical 2 drilling spindles, horizontal in X Isdpfx Ahez Rrbwoyeih 2 drilling spindles, horizontal in Y Notch saw, 90° swiveling with LED light strip as positioning aid with 2 vacuum pumps, each 300 m³/h with special workpiece clamping system for small parts with barcode scanner Safety device: bumper with chip conveyor with powerControl PC 85 control system with handheld operating device Software: Homag Woodwop 8.0 WoodScan CollisionControl Space requirement: approx. L x W x H 7650 x 4710 x 2850 mm Availability: approx. July 2027 Location: NRW (North Rhine-Westphalia)

Year of construction: 2017, condition: as good as new (ex-display), machine/vehicle number: 6151550180, Demonstration tool: hydraulic high torque wrench LP2 from TITAN without link Torque range: 363 to 2476 Nm Downforce: suitable for screwdrivers (wrench size SW 19 to SW 60) Links are optional and not included Weight: depending on the cassette from 2.56 to 3.16 kg Total length with cassette: 226.1 mm Total height: 31.8 mm Advantages: -Patent Multi Axen connection: Freely movable hose, multi-positioning of the hose -Flat design: Fits easily on all tight spots - Unique broad-gauge teeth -Modular concept Characteristics: -Certified accuracy +/- 3% -The Titan WIDE Track ratchet-tooth design distributes the force evenly, it provides a larger contact surface and thus brings the power to solve the-bolt case perfectly - every time - Handcrafted from the highest quality aviation materials for ultimate strength and durability (AQ Grade 7075-T6 Alloy) Isdpfjdv Scfsx Ahyoih - Low profile and flat design for extremely tight spaces

Condition: ready for operation (used), Year of construction: 2020, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 830 mm, spindle motor power: 22,900 W, overall weight: 6,550 kg, controller manufacturer: SIEMENS, controller model: 828D, number of slots in tool magazine: 12, number of axes: 6, This 6-axis DOOSAN PUMA 2600 SY II was manufactured in 2020. It features a maximum turning diameter of 376 mm and a turning length of 760 mm. The machine is equipped with a powerful spindle speed range of 20–4,000 rpm and a robust turret with 12 tool stations. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA 2600 SY II horizontal turning machine we have for sale. Contact us for further details. • Controlled axes: X, Z, Y, B, C1, C2 • Slant bed: 30°Travels and rapid traverse • B-axis (sub-spindle) travel: 830 mm • C1-axis: ±360° • C2-axis: ±360° • Rapid traverse (X / Z / Y / B): 30 / 30 / 10 / 30 m/minMain spindle • Spindle nose: ASA A2-8 Ijdpfjz N Dhtox Ahyeih • Hydraulic chuck: 254 mm, 3-jaw • Max. torque: 730 Nm • Spindle bore: 91 mm • Drawtube ID: 82 mm • Integrated built-in spindle motor • C1 positioning resolution: 0.001°Sub-spindle • Spindle nose: ASA A2-5 • Hydraulic chuck: 170 mm, 3-jaw • Speed range: 60–6,000 rpm • Motor power: 18.2 kW • Max. torque: 220 Nm • Spindle bore: 62 mm • Drawtube ID: 50 mm • Built-in motor • C2 positioning resolution: 0.001° • Part ejector stroke: 120 mmMachining capacity • Max. swing over bed: 780 mm • Max. swing at front door: 680 mm • Max. swing over carriage: 630 mm • Max. turning diameter: 376 mm • Max. turning length between centers: 760 mm • Max. bar capacity, main spindle: 81 mm • Max. bar capacity, sub-spindle: 49 mm • Off-center milling capacity (Y-axis): 105 mm (±52.5 mm) • Max. cantilever workpiece weight: 260 kg • Max. workpiece weight using sub-spindle: 520 kgTurret and driven tools • Turret type: BMT-65 • Turret indexing positions: 24 • Tool stations: 12 (all 12 driven) • Indexing time: 0.15 / 0.65 sec • Turning tool size: 25 × 25 mm • Boring tool capacity: Ø50 mm / Ø32 mm • Driven-tool speed: 50–5,000 rpm • Driven-tool power: 4.1 / 7.79 kW • Max. driven-tool torque: 79.8 Nm • ER-32 capacity: Ø3–20 mm • Rigid tapping: Yes Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 3,400 rpm, travel distance X-axis: 213 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 572 mm, spindle motor power: 22,400 W, overall weight: 5,580 kg, number of slots in tool magazine: 12, number of axes: 3, This 3-axis HAAS ST-25Y was manufactured in 2022. It features a maximum cutting diameter of 11.75 in and a maximum cutting length of 22.5 in. The machine is equipped with a 10 in chuck size and a robust spindle speed of 3400 rpm. If you are looking to get high-quality turning capabilities, consider the HAAS ST-25Y horizontal turning machine we have for sale. Contact us for further details. • Working hours: 0 (showroom machine) • Chuck size: 10.0 in / 254 mm • Max part swing: 21.0 in / 533 mm • Max cutting diameter (with BMT65 turret): 11.75 in / 298 mm • Max cutting length: 22.5 in / 572 mm • Bar capacity: 3.00 in / 76 mm • Rapids (X / Y / Z): 472 ipm (12.0 m/min) / 472 ipm (12.0 m/min) / 945 ipm (24.0 m/min) • Max thrust (X / Y / Z): 4100 lbf (18238 N) / 2300 lbf (10231 N) / 5100 lbf (22686 N) • Spindle nose: A2-6 • Max spindle torque: 300.0 ft-lbf @ 500 rpm / 407.0 Nm @ 500 rpm • Spindle bore diameter: 3.50 in / 88.9 mm • Main spindle C axis max rating: 5.0 hp / 3.7 kW • Main spindle C axis max speed: 60 rpm • Main spindle C axis positioning: ± 0.01° • Main spindle C axis brake diameter: 13.9 in / 353 mm • Main spindle C axis brake holding torque: 250 ft-lbf / 339 Nm • Sub-spindle chuck size: 5.3 in / 135 mm • Sub-spindle nose: A2-5 • Sub-spindle max speed: 6000 rpm • Sub-spindle max sync speed with main spindle: 3400 rpm • Sub-spindle chuck throat: Ø 1.30 in x 1.37 in deep / Ø 33.0 mm x 34.8 mm deep Iisdpfx Asz N Dmvjhyjh • Sub-spindle drawbar bore (non-through): Ø 1.00 in x 4.50 in deep / Ø 25.4 mm x 114.3 mm deep • Sub-spindle bore (without chuck and drawbar): 1.50 in / 38.1 mm • Sub-spindle integrated brake torque: 17 ft-lbf / 23 N·m • Sub-spindle orientation accuracy: ± 0.02° • Sub-spindle rapids (B-axis): 400 ipm / 10 m/min • OD vs ID tools: Any combination • Boring bar rear clearance: 4.00 in / 102.0 mm • Live tooling max speed: 4000 rpm • Live tooling interface: BMT65 • Coolant capacity: 55 gal / 208 L • Air requirements: 4 scfm @ 100 psi / 113.0 L/min @ 6.9 bar • Inline air hose and coupler: 3/8 in • Minimum air pressure: 80 psi / 5.5 bar • Drive system: Direct speed, belt drive • Electrical requirements: Low 220 VAC @ 70 A / High 440 VAC @ 35 A (3 Phase) • Shipping dimensions (domestic): 142.0 in x 90.0 in x 92.0 in / 361 cm x 229 cm x 234 cm Technical Specification Driven Tools Yes Counter Spindle Yes

Year of construction: 2020, condition: excellent (used), Stationary Piston Compressor Aircraft AIRPROFI 703/270/10 V Used: Year of manufacture 2020 - Top condition - Stationary compressors with a vertical 270 l tank offer maximum performance in a compact space. Robust design and best quality Fully automatic on/off operation Equipped with all safety devices Completely ready for connection Fifteen-year guarantee against rust on the internally and externally hot-dip galvanized compressed air tank Quality electric motor High-quality electric motor with high starting torque is equipped with a motor protection switch Starting capacitor and starting relief valve ensure easy starting Standard equipped with a phase inverter for easy manual reversal of the direction of rotation Compressed air compression via high-performance HOS unit The starting relief valve ensures easy, pressure-free starting The two-cylinder high-performance unit made of gray cast iron and the low speed guarantee particularly quiet and low-vibration operation; this ensures a long service life due to minimized wear Optimal lubrication of the compressor for high service life and reliability Equipped with a high-quality intake filter Aftercooler with large cooling fins results in a low tank inlet temperature and less moisture in the compressed air to protect the compressed air tools Additionally with an intercooler to the aftercooler Corrosion-resistant valve plates for improved heat dissipation and longer service life of the compressor Optimal cooling of the compressor by a large fan wheel and a cooling air deflector on the cylinder Stable metal belt guard for optimal protection of the components and for high user safety No vibration breaks in the compressed air supply line to the tank due to flexible armored hose with heat protection High-quality drive belt Iiodpfoz Rq Euex Ahyjh Powerful and efficient drive The toothed drive belt facilitates starting, improves running smoothness and power transmission, and reduces power consumption by up to 30% Stable metal belt guard Operation on the service block Equipped with a high-quality CONDOR pressure switch with a robust push-button function for fully automatic on/off operation Air outlet on the service block via a comfortable safety quick coupling Only fixed screw connections on the service block, no hose connections High-quality tank with permanent rust protection Air outlet ¾" Length (product) approx. 780 mm Width/Depth (product) approx. 680 mm Height (product) approx. 1870 mm Weight (net) approx. 152 kg Automatic pressure switch CONDOR Drive transmission V-belt, toothed Material of compressed air line Flexible armored hose with heat protection Compressed air outlet Ball valve Condensate drain Condensate drain valve Compressed air tank Internally and externally hot-dip galvanized with a fifteen-year guarantee AD 2000 compliant yes Tank base Vibration dampers Connection plug 400V CEE plug with phase inverter Connection voltage 400 V Mains frequency 50 Hz Output power 4 kW Input power 4.81 kW Sound pressure level Lp 83 dB(A) Explanation of sound pressure level Sound pressure level at a distance of 1 m according to DIN 45635 T 13 Compressor system HOS Intake capacity approx. 650 l/min Filling capacity approx. 520 l/min Explanation of filling capacity at 6 bar working pressure Number of cylinders 2 Number of compression stages 2 Compressor speed 950 min¯¹ Maximum pressure 10 bar Tank capacity 270 l Location: available from stock in 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2017, Working range Iiodpfx Ahjz R Szrjyoh X-axis: 550 mm Y-axis: 450 mm (tool change position 725 mm) Z-axis: 375 mm Workpiece carrier Double swivel carrier with counterbearing and crown gear, swivel time 0/180°: approx. 3.0 s A- and U-axis for fixture plate: max. ø475 × 830 mm Drive system: torque motor Load capacity: 2 × 360 kg Speed range A- and U-axis: 1–50 rpm C- and W-axis (optional): 2 or 4 satellites Work spindle Tool interface: HSK-A63 Speed range: 1–10,000 rpm (optional 1–17,500 rpm) Run-up time to max. speed: < 0.4 s (< 1.0 s with optional spindle) Spindle bearings: ø80 mm Power: 32 kW (40% duty cycle) Torque: 72 Nm (40% duty cycle) Feed drive Drive system: ball screw Rapid traverse X/Y/Z: 75 m/min Axis acceleration X/Y/Z: 10 / 10 / 15 m/s² Max. feed thrust X/Y/Z: 8,000 N Accuracy Position measuring system: direct, absolute Positioning tolerance X/Y/Z: Tp = 0.008 mm Tool magazine Tool change system: pick-up Capacity: 40 pockets (optional 64 or 80) Max. tool diameter: 70 mm / 160 mm (with free adjacent pockets) Max. tool length: 275 mm Max. tool weight: 7.5 kg Chip-to-chip time: approx. 2.5 s Weight and dimensions Total weight: approx. 9,500 kg Transport dimensions (W × H × L): 2.75 × 2.85 × 3.65 m Machine installed (W × H × L): 3.85 × 3.70 × 6.30 m Connected load Operating voltage: 3 × 400 V, 50 Hz, TN-S/TN-C Total connected load: approx. 64 kVA Mean air consumption: 0.5 Nm³/min (6 bar) CNC control Siemens SINUMERIK 840D

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 3,200 rpm, travel distance X-axis: 239 mm, travel distance Z-axis: 1,080 mm, spindle motor power: 29,800 W, overall weight: 5,443 kg, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 2022. This HAAS ST-28L features a chuck size of 12.0 in (305 mm) and a maximum part swing of 21.0 in (533 mm). It offers a maximum cutting length of 42.5 in (1080 mm) and a spindle power of 40.0 hp (29.8 kW). If you are looking to get high-quality turning capabilities, consider the HAAS ST-28L machine we have for sale. Contact us for further details. • Working hours: 0 (Showroom machine) • Chuck size: 12.0 in (305 mm) • Max part swing: 21.0 in (533 mm) • Max cutting diameter (with BOT turret): 13.00 in (330 mm) • Max cutting diameter (with BMT65 turret): 11.75 in (298 mm) • Max cutting length: 42.5 in (1080 mm) • Bar capacity: 4.00 in (102 mm) • Rapids X/Z: 945 ipm (24.0 m/min) • Max thrust X: 4100 lbf (18238 N) • Max thrust Z: 5100 lbf (22686 N) • Spindle nose: A2-8 • Spindle torque (max): 425.0 ft-lbf @ 325 rpm (576.0 Nm @ 325 rpm) • Spindle bore: 4.62 in (117.3 mm) • Turret: 12-station BOT Iodpfxoz N Erge Ahyjih • Boring bar rear clearance: 4.00 in (102.0 mm) • Coolant capacity: 55 gal (208 L) • Air required: 4 scfm @ 100 psi (113.0 L/min @ 6.9 bar) • Inline air hose & coupler: 3/8 in • Minimum air pressure: 80 psi (5.5 bar) • Input AC voltage (3-phase): 220 VAC / 440 VAC • Full load amps (3-phase): 70 A (220 VAC) / 35 A (440 VAC) • Shipping dimensions: 190.0 x 90.0 x 90.0 in (483 x 229 x 229 cm) Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2011, operating hours: 77,128 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: SIEMENS, controller model: 840D solution line, spindle speed (max.): 8,000 rpm, spindle motor power: 43,000 W, number of slots in tool magazine: 50, number of axes: 4, This 4-axis HELLER H6000 horizontal machining centre was manufactured in 2011. It features a generous X, Y, and Z-axis travel of 1,000 mm each, along with a B-axis NC rotary table. The machine is equipped with a SIEMENS 840D control unit and has a maximum permissible clamping mass of 1,000 kg. If you are looking to get high-quality machining capabilities, consider the HELLER H6000 machine we have for sale. Contact us for further details. - Operating Hours (Betriebsstunden): 77,128 h- Effective Operating Time (Nutzlaufzeit): 57,997 h- Control Unit: SIEMENS 840D solution line- X-Axis Travel: 1,000 mm- Y-Axis Travel: 1,000 mm- Z-Axis Travel: 1,000 mm- Rapid Traverse Speed: 50,000 mm/min- Feed Speed: 1 - 50,000 mm/min- Acceleration: 5 m/s²- Max. Permissible Clamping Mass: 1,000 kg- Pallet Changing Time: 13 s- Pallet Changer: 2 pallet slots- Pallet Size: 630 x 630 mm (2 units in basic machine + 1 additional pallet)- Workpiece Diameter: 900 mm (1,290 mm)- Workpiece Height: 1,200 mm- Work Unit: PC 100 PowerCutting- Speed Range: 8,000 rpm- Max. Drive Power (S6-40%): 43 kW- Max. Torque (S6-40%): 822 Nm- Workpiece Table: NC Rotary Table, indexing 360,000 x 0.001°- Workpiece Setup Station: Manually rotatable pallet 4 x 90°- Workpiece Clamping: Mechanical (includes 5-fold media interface, hydraulic pressure 60 bar)- Tool Taper: HSK 100 A (DIN 69 893)- Tool Magazine: Chain magazine with 50 slots- Max. Tool Diameter (all slots occupied): 112 mm- Max. Tool Diameter (adjacent free slots): 280 mm- Max. Tool Length: 600 mm- Min. Chip-to-Chip Time (t2,3 according to VDI 2852): 4.2 s- Coolant & Chip Management: KNOLL scraper belt chip conveyor for wet machining, KNOLL KF 400 paper band filter coolant cleaning system (70 bar internal coolant supply / IKZ), work area flushing, drip tray drawing, window blow-off device- Tool Monitoring & Accessories: Fast drill breakage control, chain magazine tool shank cleaning device, process-integrated tool monitoring + collision protection monitoring, portable handwheel unit (Bedienhandgerät) with interface- Electrical Parameters: 400 V, 50 Hz, Nominal Current 87 A Iiedpjz Spt Tsfx Ahysh Technical Specification Taper Size HSK 100

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, laser power: 6,000 W, CNC laser cutting machine TruLaser 3040 Fiber (L50) 6000 Watt X working area max.: 4000 mm Y working area max.: 2000 mm Z working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 6000 Watt Sheet metal thickness steel max.: 25 mm Sheet metal thickness stainless steel max.: 25 mm Sheet metal thickness aluminum max.: 20 mm Sheet metal thickness copper max.: 8 mm Standard equipment Standard features Machine - Closed machine frame - Integrated cabinet with roller shutter - Torque drive in combination with linear direct drives - Closed beam guidance via laser light cable (LLC) - Cooling unit - Integrated control cabinets with internal lighting - Automatic sheet metal changer in longitudinal direction - 19" touch color screen - Longitudinal conveyor belt - Work area lighting - Positioning laser diode - Spraying device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning - Transport and assembly device TRUMPF Laser - Solid-state laser TruDisk 3001 with one LLC output - Excitation via pump diodes - Laser power control Cutting head - Universal cutting head - Single cutting head strategy Ijdpfx Aoz Rl Eiohyjih - Protective glass against lens contamination - Condition monitoring of the protective glass - ControlLine: Height control and sheet metal edge detection Control system - SINUMERIK 840D SL control system - Simple workshop programming - TruTops Laser via network access - Fast reproduction - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - ContourLine - FastLine - FlyLine - AdjustLine - Teleservice via Internet Data transfer - USB interface - RJ-45 network connection - Wireless Operation Point (basis for Visual Online Support) Safety - CE marking - Light curtains - Multi-chamber extraction system - Compact dust collection system - Machine enclosure, certified viewing window, door on the right - Sliding roof - Nozzle changer - CoolLine

Condition: ready for operation (used), Year of construction: 2023, spindle speed (max.): 6,000 rpm, travel distance X-axis: 200 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 406 mm, spindle motor power: 11,200 W, number of axes: 3, This 3-axis HAAS ST-10Y was manufactured in 2023. It features a maximum cutting diameter of 11.00 in and a maximum cutting length of 16.0 in. The machine is equipped with a 12-station turret and offers rapid movements of up to 1200 ipm on the Z-axis. If you are looking to get high-quality turning capabilities, consider the HAAS ST-10Y horizontal turning machine we have for sale. Contact us for further details. • Working Hours: 0 • Showroom Machine • Chuck Size: 6.5 in / 165 mm • Max Part Swing: 16.5 in / 419 mm • Max Cutting Diameter: 11.00 in / 279 mm (with BMT45 turret) • Max Cutting Length: 16.0 in / 406 mm • Bar Capacity: 1.75 in / 44 mm • Rapids on X: 472 ipm / 12.0 m/min • Rapids on Y: 472 ipm / 12.0 m/min • Rapids on Z: 1200 ipm / 30.5 m/min • Max Thrust X: 2400 lbf / 10676 N • Max Thrust Y: 2300 lbf / 10231 N • Max Thrust Z: 3700 lbf / 16458 N • Spindle Nose: A2-5 • Spindle Max Torque: 75.0 ft-lbf @ 1300 rpm / 102.0 Nm @ 1300 rpm • Draw Tube Bore ø: 1.81 in / 46 mm • Spindle Bore ø: 2.31 in / 58.7 mm • Main Spindle C Axis Max Speed: 60 rpm • Main Spindle C Axis Positioning: ± 0.02° • Sub-Spindle Chuck Size: 5.3 in / 135 mm • Sub-Spindle Max Speed: 6000 rpm • Tailstock Taper: MT3 • Tailstock Hydraulic Quill Travel: 3.8 in / 95 mm • Turret Stations: 12 Stations (BMT45) • Live Tooling Max Speed: 4000 rpm • Coolant Capacity: 30 gal / 114 L • Air Required: 4 scfm @ 100 psi / 113.0 L/min @ 6.9 bar • Shipping Weight: 7900 lb / 3584.0 kg Additional equipment • Robot Package Max Load Capacity at Wrist: 15.4 lb / 7 kg • Robot Package Reach: 35.9 in / 911 mm • Robot Package Repeatability: 0.0004 in / 0.010 mm • Robot Single Gripper Max Part Weight: 7.9 lb / 3.6 kg Iedpoz Nz T Hofx Ahyoih • Robot Dual Gripper Max Part Weight: 5.0 lb / 2.3 kg per gripper Technical Specification Counter Spindle Yes Driven Tools No

Condition: used, functionality: fully functional, Analog torque wrench Tecnogi 1080 Iedeytqlijpfx Ahysih Measuring range: 140 - 800 Nm

Condition: excellent (used), Year of construction: 2003, operating hours: 23,273 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, workpiece length (max.): 1,400 mm, workpiece width (max.): 900 mm, workpiece height (max.): 240 mm, total length: 4,000 mm, total width: 3,000 mm, overall weight: 13,200 kg, spindle motor power: 32 W, CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 1.200 Y-axis travel mm: 900 Z-axis travel mm: 500 Rapid traverse m/min: 30 Worktable Table dimensions mm: 1.400 × 900 Max. workpiece weight kg: 1.800 Maximum workpiece size (W x L x H ) mm: 1.400 × 900 x 240 Spindle Spindle speed rpm: 10.000 - 16.000 - 24.000 Spindle drive power kW: 32 Spindle torque Nm: 200 Tool system Tool holder: HSK-A63 Tool magazine slots: 30 Max. Tool Diameter: 125 Iodpfez S Uddox Ahysih Max. Tool Length mm: 300 Max tool weight kg: 4 Chip-to-chip time s: 6,5 Equipment Electronic Handwheel Chip conveyor Workarea light Cooling Tank capacity: 300 L Machine running times Under power: 103.179 Rated power kVA: 31 Operating Time: 23.273 Basic machine dimensions / weight Length mm: 4.000 Width mm: 3.000 Height mm: 2.800 Weight kg: 13.200

Condition: good (used), Year of construction: 2014, Description: The machine is in good technical condition, and a test run is possible upon prior arrangement. It is more suitable for serial production; it also includes a feeder and an output belt for finished parts. It comes with accessories – 2 universal chucks, clamps, and holders. Parameter PUMA MX 1600 ST Max. machining / turning diameter: 330 mm Recommended turning diameter: 170 mm Max. machining length: 900 mm Diameter over bed: 680 mm Diameter over carriage: 630 mm Bar diameter: approx. 51 mm Standard chuck: 6" Main spindle – speed: 6,000 rpm Main spindle – power: 15 / 11 kW Max. torque of main spindle: approx. 208 Nm Spindle nose: A2-5 Tailstock – speed: 6,000 rpm Tailstock – power: 15 / 11 kW Tailstock – nose: A2-5 Milling spindle: 12,000 rpm Power of milling spindle: 9 kW Torque of milling spindle: approx. 49 Nm Y-axis: 170 mm (??85 mm) B-axis: ??120?? / range 240?? X1: 450 mm Z1: 935 mm X2: 165 mm Z2: 925 mm Tool magazine: 40 positions Max. tool Ø: 70 / 95 mm Max. tool length: 200 mm Tool change time: approx. 2.1 s Lower turret: 16 positions, BMT45 Driven tools of lower turret: 6,000 rpm Iedpfx Ahsz S Hnheysih Power of driven tools: 5.5 kW Control system: Fanuc 31i-A Weight: approx. 11,600 kg Dimensions: approx. 3,800 × 2,530 × 2,760 mm

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, CNC Control: F31iA X mm: 560 Y mm: 560 Z mm: 630 B mm: 360.000 Table load capacity kg: 400 Cutting feed rate mm/min X, Y, Z: 50,000 Maximum rapid traverse rate m/min X, Y, Z: 50 Spindle speed rpm: 14,000 Spindle power kW: 18.5 Taper type: BT-40 Torque Nm: 120 Loader type: Pallet chain loader Positions in loader: 120 Maximum tool diameter: mm 70 Maximum tool diameter with adjacent positions empty mm: 140 Maximum tool length mm: 400 Maximum tool weight kg: 8 Coolant tank capacity liters: 500 Through-spindle coolant Iijdpfxsz Riu Ue Ahyoh

Condition: good (used), Year of construction: 2012, CNC Turning / Millingcenter Machine type: Mori Seiki NZX 2000 / 800 SY2 Control: Fanuc 31i A Year: 2012 SPECIFICATIONS Turningdiameter: 200 mm Max. swing over bed: 800 mm Max. turning length: 810 mm Spindle bore: 73 mm Bar capacity: 65 mm Main Spindle Max. revolution: 5.000 rpm Spindle power: 25 / 22 kW Torque: 358 Nm Bar capacity: 65 mm Spindle nose: A2-6 C-Axis: 0,001° Subspindle Max. revolution: 5.000 rpm Spindle power: 25 / 22 kW Torque: 358 Nm Bar capacity: 65 mm Spindle nose: A2-6 C-Axis: 0,001° Amount of turrets: 2 Tool capacity: 16 + 16 Driven Tools: 16 + 16 Tool: BMT32 revolution driven tools: 12.000 Y-Axis: 110 mm Req. space (LxBxH): 5.120 x 2.721 m Machine weight: 8.500 kg Equipment Chip conveyor Partscatcher Iijdpfxsz Rl Dxo Ahyoh Internal cooling: 70 bar cooling system: Knoll Short Bar Loader: Irco Breuning – ILS MUK 7016 mit Spindelverlängerung Toolholders

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, controller manufacturer: FANUC, controller model: i Series, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, number of axes: 3, This 4-axis DOOSAN DNM 5700 was manufactured in 2022. It features an X-axis travel of 1,050 mm, Y-axis travel of 570 mm, and Z-axis travel of 510 mm. The machine is equipped with a spindle speed of 12,000 rpm and a tool magazine capacity of 30 tools. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 5700 vertical machining centre we have for sale. Contact us for further details. • Rapid traverse X/Y/Z: 36 / 36 / 30 m/min Iedpfx Aoz Rw U Ashyjih • Spindle torque: 118 Nm • Through-spindle coolant: 12 bar • Power supply: 380 V, 3-phase, 50/60 Hz • Standard-height column • Tool breakage detection • Ball screw nut cooling • Coolant level sensor Additional equipment • 4th axis • Hydraulic system (3A + 1B) • Automatic doors • Robot interface • Chip conveyor • Oil skimmer • Mist collector interface Technical Specification Taper Size BT 40

Condition: good (used), Year of construction: 2006, functionality: fully functional, Machine parameters: Swing over bed: 406 mm Max. turning length: 1219 mm Description: The machine is in good technical condition, and a test run is possible upon prior agreement. Haas CNC control. Max. turning diameter 406 mm / 16". Max. turning length 1,219 mm / 48". Distance between centers 1,219 mm / 48". Swing over cross slide / carriage approx. 282 mm / 11.1". X-axis travel 203 mm / 8". Z-axis travel 1,219 mm / 48". Spindle A2-6. Spindle bore 76.2 mm / 3.00". Spindle speed 0–2,000 rpm. Spindle power 12 HP / approx. 8.9 kW. Torque approx. 203 Nm at 150 rpm. Chuck usually 10" / 254 mm. Tailstock manual, depending on configuration. Weight approx. 2,087 kg. Machine dimensions approx. 2,515 × 1,727 × 1,981 mm (operating dimensions). Electrical connection 195–260 V, 3-phase / approx. 25 A or 1-phase 240 V / 40 A depending on configuration. Iiedpfjz S Hy Rsx Ahyoh

Condition: excellent (used), Year of construction: 2020, KRAUSSMAFFEI KM 201-380 PX electric injection molding machine Year of manufacture: 2020 Operating hours: 21,849 h Clamping force: 2,000 kN (200 tons) Control system: MC6 Drive system: servo-electric with servo-hydraulic components Machine characteristics • Five-point, double toggle mechanism for the clamping unit, three-platen design. • Servo-electric drive for the clamping unit. • Servo-electric drive for injection and plasticizing. • Servo-hydraulic drive for the injection unit movement. • MC6 control system based on an industrial computer with real-time Ethernet communication. • Plasticizing unit for thermoplastics with a 40 mm diameter screw. Clamping unit Parameter Value Clamping force 2,000 kN (200 t) Mold opening force 300 kN Mounting plate dimensions (H × V) 870 × 820 mm Distance between columns (H × V) 635 × 585 mm Mold opening stroke 500 mm Minimum mold height 250 mm Maximum mold height 550 mm Maximum plate clearance 1,050 mm Ejector stroke 200 mm Ejector force forward / backward 39 / 19 kN Ejector speed 350 mm/s Iiodjz Szncepfx Ahysh Injection unit Parameter Value Screw diameter 40 mm L/D ratio 20:1 Maximum injection pressure 1,860 bar Injection volume 201 cm³ Injection shot weight 183 g Injection speed 125 mm/s Injection rate 157 cm³/s Maximum screw speed 334 rpm Plasticizing rate 24.7 g/s Screw torque 337 Nm Nozzle clamping force 34 kN Nozzle radius 10 mm Nozzle orifice diameter 4 mm Electrical and hydraulic parameters Parameter Value Connected load 13.8 kW Electrical protection 63 A Installed heater power 11.5 kW Number of cylinder heating zones 5 Dry cycle time according to EUROMAP 6 2.0 s / 445 mm Oil tank capacity 200 l Weight and dimensions Parameter Value Net weight with control cabinet 14,300 kg Machine length 6,120 mm Machine width 2,170 mm Machine height 2,210 mm