Used Three-Roll Mill for sale (25,709)

Condition: new, functionality: fully functional, Year of construction: 2025, HAV 3293 Plate width: 3200mm Top Roll diameter: 930mm Side rolls diameter: mm 800 Machine weight: 150 Ton Rolling capacities (Y:260Mpa/Ø 4650mm): 3200mmx155mm Ndsdpfx Asiivg Sof Ejc Prebending capacities (Y:260Mpa/Ø 4650mm): 3200mmx115mm

Year of construction: 1962, condition: good (used), Manufacturer: VEB Type: RV16 Ndjdpfx Afsltiy Ts Esc Machinable cross-section: 120 x 140 mm Weight: 2,7 t

Condition: new, functionality: fully functional, Year of construction: 2025, Hydraulically controlled three-roller bending machine Make BIKO, model B3 2021 Ndjdpfx Afecuxp Te Ejc Technical specifications: Number of Reels: Three Geometry of the side rollers: linear guides Working width: 2000 mm Top roller diameter: 215 mm Side roller diameter: 195 mm Guaranteed installed power: 7.2 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 3,000 kg Length: 3,700 mm Width: 1,000mm Height: 1,100 mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 13 mm Bending capacity (full working width) 9 mm from pipe diameter 1075 mm Rolling capacity (full working width) 9 mm Bending performance (full working width) 7 mm from pipe diameter 280 mm Standard equipment: Double linear guide system for the roller movement Extremely wide bearing blocks MCS double bearing system for the roller rotation Extra heavy double hinged release Hardened rolls for high wear protection Hydraulic parallelism system of the side rolls Digital display for the position of the side rolls cone bending device Safety trip wire with emergency stop and CE certification Mobile control panel

Condition: new, functionality: fully functional, Year of construction: 2025, Mechanical asymmetrical three-roller bending machine with pre-bending Make FACCIN, model ASI 2015 Guaranteed services: Sheet thickness rolls at 750 mm diameter 5 mm Sheet thickness bending at 750 mm diameter 4 mm Sheet thickness rollers with 195 mm diameter 4 mm Sheet thickness bending at 195 mm diameter 3 mm Performance data refer to steel with a yield point of 240 N/mm² and a strength of 370 N/mm² Technical specifications: Working length 2,000 mm Top roller diameter 150 mm Bottom roller diameter 150 mm Side roller diameter 150 mm Installed power 4.3 kW rolling speed 4 m/min Nsdpfjcuxpqsx Af Eedc Length 3,300 mm Width 750mm Height 1,200 mm Weight 2,136 kg Standard equipment: All rolls forged and inductively hardened Both central rollers driven Safety control with immediate stop of all machine movements Machine stand stands on frame carrier made of welded construction. This ensures optimum stability and reliability of the machine. Optimum power transmission in the machine stand through long guides with straight-line positioning movement of the bending rollers. (No curved adjustment movement and therefore no torsional forces in the machine stand) Digital display for the position display of the side roll motorized adjustment of the side roll brake motor for rotation and side roll movement Cone bending device with hardened stop block Emergency stop trip wire around the machine Machine with CE certification and documentation

Condition: new, functionality: fully functional, Year of construction: 2025, Three rolls variable axis bending roll Make FACCIN, model HAV/S 3145 Technical specifications: Number of Reels: Three Njdpfxoc S N Nqo Af Eedc Geometry of the side rollers: variable Working width: 3000 mm Top roller diameter: 450 mm variable three-roller bending machine

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, 2-tank system Cleaning medium: modified alcohol Basket dimensions: L 530 x W 320 x H 200 mm Vacuum distillation Ultrasonic cleaning Vacuum drying Ndodpfx Afsxqyiws Eec Batch weight: 50 kg

Condition: used, overall weight: 34,000 kg, maximum load weight: 26,150 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,500 mm, loading space height: 1,000 mm, first registration: 03/2007, Year of construction: 2007, Equipment: ABS, Available for purchase, rental, or lease with purchase option—subject to prior agreement! Schröder flatbed trailer with Kennis roll-off crane type 14.000 / 3 hydraulic extensions ---- * Manufacturer: Schröder * Type: Roll-off crane trailer * First registration: 03/2007 * Color: Chassis black, drop sides and front wall white * Internal platform dimensions: approx. 13.50 m long x 2.50 m wide x 1.00 m high * Gross vehicle weight: 34,000 kg * Curb weight (as per registration): 7,850 kg * Payload: 26,150 kg * Axles: 3 x BPW, 1st axle liftable, 3rd axle steered * Suspension: Air suspension with raise/lower function * Tires: 385/65 R 22.5 approx. 50% tread * EBS Wabco * Kennis roll-off crane type 14.000-R, year 2007 * 2 plug-in crane supports Nsdpjwt Nd Sefx Af Esdc * 3 hydraulic extensions * Maximum outreach at 7.10 m = 1,800 kg * Short boom at 3.50 m = 4,000 kg * 5th and 6th hydraulic function * Hatz diesel engine with Silent Pack * 5-part aluminum drop sides * Wooden/steel floor * Removable stanchions * Lashing rails on left and right for load securing * Extendable warning signs front and rear next to crane supports * Heavy-duty stabilizers * Individual mudguards * Central lubrication * Toolboxes left and right * Reversing light * Work light on the crane Available for purchase, rental, or lease with purchase option—subject to prior agreement! Please note possible inaccuracies in this ad: Despite careful preparation, errors may occur in the text or details. We accept no liability for mistakes, changes, or prior sale. All information is provided without guarantee. Please contact us to verify details or for further questions.

Condition: used, Year of construction: 2010, operating hours: 36,283 h, functionality: limited functionality, total width: 1,800 mm, total length: 3,000 mm, total height: 3,000 mm, maximum load weight: 4,000 kg, heating capacity: 18 kW (24.47 HP), Currently in stock, available immediately Can be completely or partially overhauled upon customer request. Ndjdpfx Afevmqrfs Ejc

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Specifications Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15 Nsdpfx Afoxghngs Eedc

Condition: used, Universal Static Material Testing Machine AllroundLine with Two Test Spaces Tensile Testing Machine, Compression Testing Machine ZWICK / ROELL Type 1474 / 01 Year of manufacture: 1984 / 2003 Type: 01 . 96255/03 . 112137 Design: Universal Testing Machine Test force: 100 kN (10 t) Test area height: 1460 mm Test area width: 430 mm Traverse path max.: 1200 mm Test speed max.: 250 mm/min Power supply: 400 Volt, 50 Hz (L1/PE/N) Rated current: 10 A Motor power: 4.4 kW Interface: RS485 - Control system retrofit in 2003 - For tensile, compression, and bending tests on material samples, components, and assemblies - Data output via RS485 - 1 load cell for measuring compressive and tensile forces included. The machine is sold without PC and software; only the installed load cell is included in the scope of delivery. Ndodpfx Asxantcef Esc Required floor space (W x D x H): 1150 x 800 x 1960 mm Weight: 820 kg Good condition

Condition: excellent (used), Zwick/Roell Zwick/Roell 1456 RetroLine Universal Testing Machine 20 kN For sale is a high-quality universal testing machine from the renowned manufacturer ZwickRoell, model 1456 RetroLine, year 2023, with a nominal force of 20 kN. The machine was completely upgraded to state-of-the-art technology as part of the RetroLine modernization and is ready for immediate use. The machine is in very good condition, has been modernized, and complies with all current standards. It is ideally suited for tensile, compression, bending, and shear tests in research, development, and quality assurance. Technical data: Make: ZwickRoell Model: 1456 RetroLine Year of manufacture: 2023 Nominal force: 20 kN Test space dimensions: Height 900 mm, Width 420 mm Drive: Electromechanical spindle drive Speed range: 0.001 – 1000 mm/min (depending on model) Measurement accuracy: ± 1% according to ISO 7500-1, Class 1 (optionally 0.5) Control system: testControl II Software: testXpert III Equipment: Replacement head Cabinet (protective / soundproofing) Evaluation unit included For the ZwickRoell 1456 RetroLine with 20 kN, the approximate values (depending on configuration and equipment, e.g., cabinet, evaluation unit) are as follows: Dimensions Overall height: approx. 1.8 – 2.0 m Width: approx. 600 – 800 mm Depth: approx. 600 – 800 mm Test space (installation height/width): 900 mm × 420 mm Weight: Base machine: approx. 250 – 350 kg With cabinet and evaluation unit: up to approx. 400 – 450 kg Ndsdpsw U N Rtefx Af Eoc Condition: used Scope of delivery: (see picture) - Zwick/Roell 1456 RetroLine testing machine (20 kN) - Protective / soundproofing cabinet - Interface card for force transducer - Operating and technical documentation (PDF & printed) Inspection by arrangement possible. Shipping or collection by arrangement. (Specifications and technical data subject to change and errors excepted!) Further questions can be answered by phone.

Condition: excellent (used), Year of construction: 2001, Technical Specification Universal Testing Machine UTS Testsysteme / Zwick Roell ZMART.PRO 1150.00803 Identification Data Name: Universal Testing Machine Model/Type: ZMART.PRO 1150.00803 Manufacturer: UTS Testsysteme GmbH / Zwick Roell Year of Manufacture: 2001 Place of Manufacture: Ulm, Germany Serial Number: 0109 3045 Drive Unit Servo Actuator: GEORGI KOBOLD, type KSY 4612.20-2 R6 Actuator Power: 400 × 3.80 W Planetary Gearbox: NEUGART, type PL 115-25 Maximum Load: up to 50 kN Measuring Table Material: Metal Dimensions: 900 × 500 mm Control System Control Cabinet: Controller BZ1 – MM050M1.UT01 Controller Serial Number: 821501/11 Computer/Software: TESTXPERT by Zwick Roell Load Cell Manufacturer: Zwick / Roell Year of Manufacture: 2014 Type: Series K Nominal Load: 50 kN Summary This machine is a complete universal testing system designed for mechanical testing of material samples under loads up to 50 kN. Equipped with a modern load cell (year 2014) and TESTXPERT software from Zwick Roell, it enables a wide range of strength and durability tests compliant with current standards. The UTS Testsysteme / Zwick Roell ZMART.PRO universal testing machine is intended for strength testing of materials and structural components. Ndodpsxbrm Ajfx Af Eec Main Applications: - Tensile tests – determining the force required to break a sample (e.g., metal, plastic, rubber, composite). - Compression tests – assessing material behavior under high compressive force. - Bending and fracture tests – assessing resistance to breaking under static load. - Cyclic and fatigue tests – evaluating the durability of elements under repeated loads. - Material characterization – determination of parameters such as yield strength, tensile strength, modulus of elasticity, elongation at break, etc. Application Areas: - Research laboratories (universities, institutes, certification bodies) - Plastics industry – testing properties of new composites, technical plastics, rubbers - Metal and aerospace industries – quality control of metal alloys, aluminum, steel - Automotive industry – quality assurance of parts and structural materials - Quality control in serial production – testing product samples before market release.

Condition: used, overall weight: 34,000 kg, maximum load weight: 26,150 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,500 mm, loading space height: 1,000 mm, first registration: 03/2007, Year of construction: 2007, Equipment: ABS, Available for purchase, rental, or lease with purchase option upon agreement! Schröder flatbed trailer with Kennis roll-loader crane Type 14.000 / 3 hydraulic extensions ---- * Manufacturer: Schröder * Type: Roll-loader crane trailer * First registration: 03/2007 * Colour: Chassis black, side and front walls white * Internal dimensions of platform: approx. 13.50m long x 2.50m wide x 1.00m high * Gross weight: 34,000 kg Ndodpfxswt Nfpo Af Eec * Empty weight according to registration: 7,850 kg * Payload: 26,150 kg * Axles: 3 x BPW with 1st axle liftable / 3rd axle steered * Suspension: Air suspension with lift/lower function * Tyres: 385/65 R 22.5 approx. 50% * EBS Wabco * Kennis roll-loader crane type 14.000-R, year 2007 * 2 crane support legs * 3 hydraulic extensions * Maximum outreach at 7.10m = 1,800 kg * Short boom at 3.50m = 4,000 kg * 5th and 6th control circuits * Hatz diesel engine with Silent Pack * 5-piece aluminium drop sides * Floor: wood/steel * Removable stanchions * Lashing rail left and right for securing loads * Extendable warning signs front and rear in front of supports * Full load supports * Single mudguards * Central lubrication * Tool box left and right * Reversing lights * Work lights on crane Available for purchase, rental, or lease with purchase option upon agreement! Note regarding possible errors in the ad: Despite careful creation of this advertisement, errors in the text or information may occasionally occur. We do not accept liability for mistakes, changes or interim sales. All information is provided without guarantee. Please contact us to verify details or if you have further questions.

Condition: used, Year of construction: 2007, functionality: fully functional, 1 lot approx. 15x Revo END KSB ROLL servomotors Valve quarter-turn actuator Actuator ACTAIR NG 5 F05/07 End ZA27-ED63 Revo RD501200500000 Only for sale complete Used from roll car wash disassembly Item location is 75053 Gondelsheim Used condition, see pictures Shipping by forwarding agent or collection by appointment Nedpfxoum I Sfo Af Eodc

Condition: like new (used), Year of construction: 2021, functionality: fully functional, roll diameter: 60 mm, roll width: 1,035 mm, total width: 1,070 mm, total length: 97,680 mm, conveying length: 97,680 mm, roll spacing: 100 mm, axle spacing: 125 mm, drive type: Schwerkraft, Roller Conveyor / Rollers / Conveyor Track -Approximately 97.68 running meters Manufacturer: rack-and-roll Condition: used, unused, *like new* Drive type: gravity Year of manufacture: 2021 Total length: approx. 97,680 mm System consists of: 37 segments x approx. 2,640 mm length Ndedpfx Aewdr E Hjf Esc Total width: approx. 1,070 mm Roller/conveyor width: approx. 1,035 mm Roller diameter: approx. 60 mm Roller/axle spacing: approx. 100/125 mm Frame dimensions: approx. 85/5 mm Material: steel/galvanized Each segment equipped with one brake roller Stock: 97.68 meters Price per meter Features: Condition: fully operational, with signs of wear Ideal for fast material transport Professionally dismantled and packaged Collection address: Industriestraße 5 (47918 Tönisvorst) The conveyor system was in operation until removal. Due to the excellent workmanship of the conveyor technology, your materials glide smoothly to their destination, even under high loads. Customized solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods, we are your competent point of contact! We are happy to provide you with a tailored offer or to advise you on design and installation matters. Simply let us know your requirements and local conditions. Take advantage of our many years of experience and our excellent network of professionals. We have already successfully completed projects for companies in various industries, such as logistics, pharmaceutical industry, trades, or electronics. Together, we will find ways to optimize your processes and material flow cost-effectively and sustainably. We can even offer you fully automated sorting technology or supplementary components such as picking racks or containers.

Condition: used, Static Universal Testing Machine AllroundLine with two test chambers Tensile Testing Machine, Compression Testing Machine ZWICK / ROELL Type AllroundLine Z010 / TH2S Year of manufacture: 1996 Model: BZ010TH2S Nsdpoxanrxjfx Af Esdc . 132583/96 . 406678 Design: Benchtop testing machine Test force: 10 kN (1000 kg) Test chamber height: 1458 mm Test chamber width: 440 mm Crosshead speed: mm/min Drive travel resolution: 0.0625 µm Repeatability accuracy: ±2 µm Motor power: 500 W Power supply: 230 Volt, 50 Hz Rated current: 3 A Power consumption: 800 VA Interface: RS485 - For tensile, compression, and bending tests on material specimens, components, and assemblies - Equipped with TH2S control unit (machine controller) - Data output via RS485 - 1 piece load cell for measuring compression and tensile forces, AST Type KAF-W (Angewandte System Technik GmbH, year 2013) The machine is sold without PC and without software, only the described load cell is installed. Space requirement (W x D x H): 1000 x 650 x 1920 mm Weight: approx. 220 kg Good condition

Condition: excellent (used), Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN Type: BT1-FB010TN.D30 For sale is a high-quality materials testing machine, model Zwick/Roell Z010 TN ProLine (BT1FB010TN.D30), supplied with comprehensive equipment. This system is ideally suited for tensile, compression, bending, and component tests and is offered with original Zwick software, accessories, and safety screen. Complete system Including safety screen (CE-compliant, with electric interlock) Comprehensive accessories and software included Technical data of the testing machine: Model: Z010 TN ProLine, nominal force 10 kN Test area (W x H): 440 x 1050 mm Testing speed: 0.001 – 1000 mm/min, continuous up to nominal force High-precision guidance, very low noise emission High-resolution, maintenance-free DC motor Electrical connection adjustable in 6 voltage ranges Including interface card for force transducer (additional slot available for expansions) Expandable with options and modules Safety – Safety screen (included in delivery): Suitable for ProLine Z005TN, Z010TN, Z020TN With electric interlock and additional manual locking Makrolon pane, 6 mm thick, pivoting (hinged left) Ndedpfxsw Uifdo Af Ejc CE-compliant Mandatory for applications with risk of operator injury Force transducer: Xforce HP force transducer, nominal force 10 kN Accuracy class: 1 from 20 N, 0.5 from 100 N (according to ISO 7500-1) Extremely good linearity (

Condition: like new (used), Miwe Roll In from 2017, 60x80 electric, in good working condition. Ndjdsw El Anjpfx Af Eoc

Condition: used, axle configuration: 2 axles, first registration: 12/2008, suspension: steel, tire size: 185/R 140, wheelbase: 4,860 mm, Year of construction: 2008, = Additional Options and Accessories = Ndjdpew Igpmjfx Af Ejc - Leaf Spring Suspension = Additional Information = Axle Configuration Tire Size: 185/R 140 Suspension: Leaf Spring Suspension Front Axle: Steered; Left Tire Profile: 70%; Right Tire Profile: 70% Rear Axle: Left Tire Profile: 70%; Right Tire Profile: 70% Weights Curb Weight: 1,460 kg Payload: 1,540 kg GVW: 3,000 kg Functional Loading Platform Height: 80 cm Condition Damage: None Identification License Plate: 92-WD-GS

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Zwick Roell Pendulum Impact Testing Machine HIT5P Plus incl. TestXpert III software and 2 Charpy pendulums Year of Manufacture: 2019 Dossier number: DO733812 Safety guard, fixed left side • 010924 TestXpert III Software TestXpert III Basic Program 1035123 TestXpert III Standard Test Program 1035790 Ndsdpfx Afjw H Ande Esc Manual Charpy Pendulum 1J BPI-ACPECHI.112 Charpy Pendulum 5J BPI-ACPECHI.115 Performed according to Charpy ISO 179-1:2000 + Amend. 1:2005 German Version EN ISO 179-1:2000 + A1_2005 Dimensions: 680 x 658 x 404 mm (without guard) Maximum working capacity: 5 J Dimensions (W x H x D): 680 x 658 x 404 mm (without guard) Weight (without fixtures) approx. 75 kg Electrical connection: 100 to 240 V, 50/60 Hz, 70 W Interfaces: RS232, USB Angular resolution: 0.018° Test results, numerical Impact energy [%] Impact energy [J; ft lbf] Impact toughness [kJ/m²] Control function: Pendulum vertical position Oscillation duration Pendulum vertical position Oscillation period Correction function: friction correction Impact tensile test: Air and bearing friction, kinetic yoke energy 3.1 Charpy Testing The Charpy blocks consist of a solid cast base. Test-specific parts, such as anvils and supports, are selected according to the specimen spectrum. The anvils, which through surface roughness and radius can significantly affect test results, are fully precision CNC-manufactured and 100% measured. Single-piece anvils, which often lack sufficient dimensional accuracy, are not offered by ZwickRoell. During installation, the spatial position of the anvils relative to the pendulum hammer is ensured by an optional gauge. Anvils are subject to higher wear than supports, but two-piece anvils can be economically replaced independently of other accessories. Quick-change adapter plates allow adjustment of the impact point to the specimen width (impact direction). Adaptation to specimen thickness (vertical direction) is achieved by appropriately dimensioned supports, which are accurately fitted using locating pins. Optional accessories for the testing frame include a pivoting safety shield and alignment units, which position the specimen either at the notch or at one end face aligned to the impact center. Advantages: • Rapid block change • Precision manufacturing and documented 100% dimensional accuracy control of the anvils

Condition: excellent (used), Testing system for measuring tensile and compressive forces up to 100 kN Manufacturer: Zwick Type: 7045.370.1a Materials testing machine Tensile and compressive forces up to 100 kN PC Software: testXpert testing software Documentation: Basic program for tensile and compression testing Zimt command interpreter Instruction manual Cards & Modules: Zwick ZPS 7095.1 Rev.: d Power supply unit Zwick ZPU 7095.2 Rev.: j Central processing unit Zwick ZAST 7096.4 Rev.: f Drive control unit Sieb & Meyer AC-Servo 26.39.2 AC-Servo module Dimensions: Height: 3200 mm Width: 1120 mm Depth: 620 mm Weight: 1140 kg Modernization of the Frank machine 81120 1995 Cost: 113,000 DM Ndsdpfx Afeqtrkdo Eec Modernization of the universal testing machine with digital measurement and control electronics Additional slots for 3 connection cards Remote control for extended control of the testing machine during setup and test execution Measuring amplifier (TF) for force or analog length change Connector for voltage measurements (e.g., single strain gauge with preamplifier), without calibration Connector for strain gauge transducers for force or displacement measurement, without calibration Control unit with IEEE 488 bus card ZIMT program for calibrating the force transducers in conjunction with the DK 38 MGT 32 S 71 (0 ... 10 V output) and the Keithly 182 digital multimeter Program sequence: 10 calibration steps under load or unload Files are available in the ASCII file Drive unit for the Frank 81120 AC Motor Resolver with motor plate Find more new and used items in our shop! International shipping costs on request!

Condition: excellent (used), Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z0.05 Type: BT1-FRO.5TS.D14 with testXpert II V3.0 software Zwick/Roell zwicki Z0.5 TS Materials Testing Machine 0.5 kN Professional materials testing machine for tensile, compression, flexure, and component testing. Fully equipped with testControl electronics, testXpert II software, accessories, and PC workstation. Technical specifications of the testing device Model: zwicki Z0.5 TS Rated force: 0.5 kN (500 N) Max. test space height: 573 mm Test speed: 0.001 – 2000 mm/min (optionally up to 3000 mm/min) Online machine compliance correction for maximum accuracy Adaptive controller for force and strain control High precision and real-time data processing Modular expandability: 2 module slots (optionally up to 4) Clamping range flexibly adjustable Xforce P force transducer Type: Precision Rated force: 500 N Accuracy class 1 as per ISO 7500-1 from 2 N Accuracy class 0.5 from 10 N Ndjdpfew Uf Uzsx Af Esc Insensitive to lateral forces, bending/torsion moments Rugged design, overloadable up to 150% of rated force Incl. calibration certificate according to ISO 7500-1 Software – testXpert II Includes basic program in German Easy operation on Windows XP/Vista (compatible with standard PCs) Integrated simulation mode (Virtual Testing Machine) Statistical analysis & tolerance monitoring Accessories Unit for tack-loop test Fmax 500 N Fixture for adhesive tapes Glass plate 25 x 30 mm (FINAT Test No. 9) incl. mount Screw specimen holder Type GRS500 PL Fmax 500 N Max. opening width 21 mm Incl. Vulkollan jaws, Ø 32 mm PC & Workstation HP DC7800 Midi Tower incl. Windows XP Pro (German) Intel Core 2 Duo E6750, 2 GB RAM, 160 GB HDD DVD drive, Gigabit Ethernet, multiple USB/serial ports 19" LCD monitor (1280 x 1024), keyboard & mouse testXpert II software preinstalled Dimensions (W x D x H): approx. 450 × 450 × 1200 mm Weight: approx. 60 kg (without PC and accessories) Condition: used Scope of delivery: (see image) Zwick/Roell zwicki Z0.5 TS materials testing machine (0.5 kN) Xforce P force transducer (500 N, incl. calibration certificate) testXpert II software (basic program, German) Accessories: tack-loop test unit, glass plate with mount, screw specimen holder GRS500 PL PC workstation with monitor, keyboard, and mouse Documentation in German (Specifications and details subject to change and errors!) We are happy to answer further questions by phone.

Condition: excellent (used), Zwick Type: BT1-FR050TH.A1K 50 kN Universal Testing Machine Zwick/Roell BT1-FR050TH.A1K Material Testing Machine – Precise Strain Gauge Testing Note: PC not included!! Highlights: - Test force: 50 kN (tension/compression) - High-precision TC-MODCSCC module for strain gauge load cells (4- & 6-wire) - Measuring range: 0.2 – 165% of nominal value, data acquisition up to 500 Hz - Maximum resolution: up to 297,000 points (at 50 Hz) - Positioning repeatability: ±10 µm - Crosshead speed: 0.0005 – 600 mm/min - Robust construction - Compact dimensions: 1,814–2,688 mm height, 936 mm width, 722 mm depth - Low noise: 59 dB(A) - Ambient conditions: +10 to +35 °C, humidity 20–90% Special features: - Ideal for research, development, or industrial material testing Dimensions & weight: Load frame: - Test force (tension/compression): 50 kN - Load frame height: 1,714 mm - Overall height: 1,814 – 2,688 mm - Load frame width: 760 mm - Overall width: 936 mm - Load frame depth: 477 mm - Overall depth: 722 mm Weight: - With electronic unit: 230 kg - With typical accessories: approx. 300 kg Nsdpfx Aew S Hvzjf Ejdc Condition: used Scope of delivery: (see picture) - ZwickRoell BT1-FR050TH.A1K testing machine - Operating manual (Specifications are subject to change and errors excepted!) If you have any questions, we are happy to answer them by phone.

Condition: excellent (used), Zwick / Roell Zwick / Roell Type HIT5.5P – Pendulum Impact Testing Device For sale is a high-quality, used pendulum impact tester of type HIT5.5P by manufacturer Zwick / Roell. The device is ideally suited for instrumented impact testing according to Charpy and Izod on plastics, metals or composite materials. Device data: Device = HIT5.5P Version = V2.8 HIT Pendulum = 5 J Charpy Current pendulum energy = 5.000 J Friction = 0.017 J Friction reduction = practice swing Impact speed = 2.9 m/s Pendulum mass = 1.19 kg Release angle = 107.46 ° Pendulum length = 330.0 mm Technical data: Model: Zwick / Roell HIT5.5P Max. impact energy: 5.5 Joules Ndedpfx Aewqfnuef Eec Test methods: Charpy, Izod (instrumented) Data acquisition: force-time and displacement-time curves Supply: 230 V / 50 Hz Scope of delivery: Zwick Roell HIT5.5P incl. 5.5 J pendulum Control unit with control panel Power and connection cables Shipping by freight forwarding (pallet shipping) – costs on request Pickup by arrangement in Borken possible. Condition: used (changes and errors in the technical data, information reserved!) We will gladly answer further questions by phone for you.

Condition: excellent (used), Here we offer you a Zwick / Roell tensile testing machine table-top testing machine.Zwick / Roell material testing machine BDO-FB0.5TH load in tensile / compression direction 500 N height 1565 mm , width 292 mm , depth 469 mmwidth of the test surface: infiniteTest range depth: 100 mmMax working stroke w.o. Accessories 1266 mmPC or printer interface RS 232Required PC connection (for PC operation) COM 1Performance data: 115/230 V (PH, N, PE)Rated power : 0.4 kVAN power frequency: 50/60 HzWeight: 47 kgType: BDO-FB0.5THCondition: used / usedScope supplied: (See picture)(Changes and errors in the technical data, details reserved!)We will be happy to answer any further questions you may have on the phone. Ndedpfjd Sr S Isx Af Eec