Used Three-Roll Mill for sale (22,997)

Condition: ready for operation (used), functionality: fully functional, actuation type: electric, number of rollers: 3, total length: 2,380 mm, total width: 620 mm, total height: 1,140 mm, input voltage: 400 V, For sale: a used, 100% functional three-roll sheet metal rolling machine with electric drive. The machine features a simple and very robust construction and is ready for use in a locksmith's workshop, production facility, or for sheet metal processing. The rolls are in good condition, with no significant grooves. Isdpfxezzbv Te Ancobb Key technical data: - Machine type: 3-roll rolling machine - Power supply: 400 V (electric drive) - Maximum working width (sheet): 185 cm (1850 mm) - Overall dimensions (L x W x H): 238 cm x 62 cm x 114 cm - Technical condition: Used machine, fully functional, ready for connection. - Foot control: The machine is equipped with an external foot pedal (left/right), allowing the operator to work comfortably and freely manipulate the sheet with both hands. - Manual roll pressure: The roll position is adjusted smoothly using two upper pressure screws with convenient cranks. - Grooves on the rolls: One end of the working rolls has grooves, which enable the rolling (coiling) of rods or pipes. - Construction: Massive, welded steel frame providing high rigidity during bending and minimizing vibrations. Transportation is the buyer's responsibility.

Condition: ready for operation (used), Tool milling machine Deckel FP 2 / 3-axis digital display "NEW" / ORIGINAL CONDITION Ijdoztdl Iepfx Ancsbb from a university -Travel ranges X/Y/Z 400x200x400mm -Table clamping surface 700x350mm -Speed range 40-2000 rpm -Feeds and rapid traverses in all three axes -Tool holder ISO 40 -Vertical / Horizontal milling attachment -Fixed swivel table -Coolant system -3-axis digital display "NEW" -Spindle nut X-axis "NEW" -Machine feet -Documentation Dimensions: LxWxH 1.5x1.7x1.8 meters / Weight 1600 kg Errors and omissions excepted.

Condition: excellent (used), functionality: fully functional, Description WMW ZFWVG 250 x 800 Thread Milling Machine Thread Milling Specification: Workpiece diameter over: - Bed: 500 mm - Saddle: 250 mm Ibodpfx Aey Rgl Ujnceb Milling length: 800 mm Max. module: 7 Centre height over bed: 260 mm Workpiece spindle bore: 102 mm Workpiece turning speeds: 0.0034 – 2.65 rpm Feed rolls: 0.027 – 5.66 mm/rev Longitudinal feeds, infinitely variable: 0.3 – 198 mm/min Main drive: 4.0 kW Electrical voltage/frequency: 380 / 50 V/Hz Total power requirement: 9.5 kW Dimensions: 3000x2500x1600 mm Total weight: 3300 kg

Condition: good (used), GMP Surelam-Pro 500D Roll Laminator Production-ready, This high-quality machine is manufactured in Korea. Description: The GMP SURELAM laminator is a professional roll laminator with a working width of 500 mm. This laminator is ideal for a small printing company, advertising agency, or office. This device allows us to laminate a variety of materials thanks to independent heating control of the upper and lower rollers. Electronic lamination process control and two operating modes: manual and automatic, make working with this machine easy and enjoyable, and ensures laminations are always of the highest quality. The laminator offers single- or double-sided lamination options. Includes laminating pouch Technical specifications: – Maximum laminating width: 500 mm – Pouch thickness: 25-500 microns – Lamination speed: 700 mm/min – Pressure adjustment: manual – Temperature control: digital – Power supply: 230 V – Power: 3000 W Iodezlgb Ajpfx Ancsbb

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, power: 7.35 kW (9.99 HP), input voltage: 400 V, input frequency: 50 Hz, spindle diameter: 30 mm, The Format4 profil 45 milling machine is just one of our best-selling machines and offers unique technical solutions. These include the electromechanical MULTI adjustment system for the 250 mm milling fence for parallel guidance and quick adjustment, with a digital display. The electric fine adjustment, which can be activated with the push of a button, provides tenth-of-a-millimeter accuracy, and the milling spindle quick-change system – tool-free changing in just 10 seconds – is just as distinctive a feature of the Format4 profil 45 as the electric milling spindle height adjustment. Maintenance-free and highly precise: the patented pivoting segment guide “Easy-Glide” with a 6-year warranty; 10-year warranty on the anodized aluminum sliding table with precision “X-Roll” guide system. Further technical data: Fence: 1100 mm Milling table opening: 320 mm Extension table: 1100 Milling fence for tool diameter max.: 250 mm Milling spindle quick-change system, standard Mortise and tenon table: 1300 mm Milling spindle control: “Power-Drive” The machine has the following special equipment: 008 10 HP (7.30 kW) S6/40% 010 Star-delta starter 012 Switching contact for controlling a dust extraction system 014 3-phase CEE coupling for additional equipment with delayed activation (absolutely necessary for operating a feed unit) 016 Stepless speed control 1500–10,000 rpm only with 7.30 kW (10 HP) S6/40% (!002) 103 Milling spindle diameter 30 mm, 140 mm usable height above table 121 Milling spindle locking from the outside 125 Safety rulers “Integral” 500 mm 128 Quick clamping for milling fence 164 Mortise and tenon ruler 1100 mm 212 Swiveling device for feed Ibedpfx Anszmh Nkecjb

Condition: like new (used), Year of construction: 2019, operating hours: 9,620 h, functionality: fully functional, machine/vehicle number: 7607, feed length X-axis: 550 mm, feed length Y-axis: 340 mm, feed length Z-axis: 355 mm, travel distance X-axis: 415 mm, travel distance Y-axis: 340 mm, travel distance Z-axis: 355 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 42,000 rpm, spindle speed (min.): 5 rpm, total height: 2,450 mm, total width: 2,250 mm, total length: 2,350 mm, type of input current: three-phase, table load: 500 kg, overall weight: 4,000 kg, input voltage: 400 V, workpiece weight (max.): 500 kg, distance table to spindle center: 495 mm, space requirement width: 2,500 mm, space requirement length: 2,600 mm, space requirement height: 2,600 mm, warranty duration: 6 months, input current: 25 A, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, HSC 300/3 - 3-axis TNC640 High-speed milling machine Factory refurbished Technical data: Working area X/Y/Z 415x340x355 Workpiece weight max. 500 kg Distance machine table - spindle nose 495 mm Machine dimensions (W x D x H) 2250x2350x2450 mm Machine weight approx. 4000 kg Power connection three-phase 400V/50Hz Equipment Color light/telegraph gray Control Heidenhain TNC640 NC-34059008 SP1HF1 Milling spindle Steptec HVC140 Speed 42000 rpm Tool holder HSK40-E Tool positions 16 Ibjdpfx Anszzklqscob Tool measurement with laser Handwheel Renishaw measuring probe OMP400 Minimum quantity lubrication Adjustable air supply Dust extraction L.CUT1 with attachment silencer Services including transport, on-site inspection, training Options on request: Automation with AWEX50/5 50 electrode changing positions 5 pallet changing positions

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 6043, Year 2007 with Fanuc Series 16Oi Country of origin: CH Voltage: 3x400V/50Hz Dimensions: 216x160x216 cm Net machine weight: 3200 kg TECHNICAL SPECIFICATIONS X-axis: 300 mm Y-axis: 220 mm Z-axis: 180 mm Resolution: 0.0001 mm Clamping capacity: 0.5 – 20 mm Grinding wheel diameter: 0.1 – 16 mm Maximum clamping length: 270 mm Grinding wheel diameter: 150 mm A-axis (grinding wheel rotation): -195 / +30° Ijdpfxjzxz R Ej Ancebb B-axis (grinding head rotation): -75 / +135° C-axis (spindle indexing): 0.001° W-axis: 620 mm U-axis: 500 mm Grinding wheel speeds, continuous: from 2000 min-1 to 7200 min-1 Spindle power: 7 kW Fire extinguishing system – CO₂ Kraft & Bauer – Not verified and no guarantee of functionality. To be serviced by you. Unless otherwise indicated, the technical data is provided without any commitment.

Condition: used, Year of construction: 2022, functionality: fully functional, DOOSAN PUMA GT 3100 M – UNUSED, PRE-OWNED MACHINE WITH ROBOT CELL A Doosan Puma GT 3100 M, manufactured in 04/2022, which has never been used in production after commissioning by the supplier (February 13, 2023). 0 production hours, no workpiece contact, technically and visually in new condition. Includes a factory-installed robot cell for automated loading. Origin: Liquidation of a user's operations in the Nuremberg area. On-site or video call inspection possible. KEY FEATURES - 12″ main spindle, high power and high torque for steel and stainless steel machining - Driven tools VDI40/BMT 65P, milling, drilling and threading from the turret, complete machining in a single setup - Programmable tailstock with servo drive (Z2 axis) - Siemens Sinumerik 828D with 15″ touchscreen and ShopTurn workshop programming Ijdezi Da Rspfx Ancebb - 30° inclined bed, FEM optimized, cast iron - Halter LoadAssistant Universal Big 70 robot cell, mounted and ready for operation (see photos) FACTORY-INSTALLED SPECIAL EQUIPMENT (installed on the machine) - 24-tool turret BMT 65, Hirth gearing (1 s/position) - Automatic tool measuring arm (tool setter) - Tailstock programmable, hydraulic clamping, mount for rotating center - Auto-power-off after program end - Automatic door with servo drive - Three-jaw power chuck Ø 305 mm (12″) with hydraulic draw-in mechanism - 3x Eppinger driven tool holders (drilling/milling head, VDI40/BMT 65) - LNS hinged belt chip conveyor and LNS Turbo HB coolant filtration system - Dormatec ADF oil mist extraction system (filter level 99.97 %, 65 dB) - 20 kVA transformer separately wired - Absolute encoder on all axes HALTER LOADASSISTANT UNIVERSAL BIG 70 (Automation) A Halter robot cell with a Fanuc six-axis robot M-710iC/70 is mounted on the machine (see photos: robot arm with Halter lettering directly on the machine). Cell equipment: - Fanuc robot M-710iC/70, payload up to 70 kg - Workpiece placement via rotary table/loading tray - Workpiece-specific grippers for loading the main spindle - Safety enclosure The cell is designed for this machine and is ready for operation, eliminating the need for additional investment in automation. CONDITION Used machine, unused, no operating hours since installation at the original buyer. Sold "as is", warranty excluded (used machine). Inspection recommended before placing an order. OUR SERVICE On-site or online inspection in the Nuremberg area, transport, installation and commissioning as a separate package upon request, direct German-speaking contact person for spare parts and support, financing possible via leasing/hire-purchase partners, member of the FDM, the German trade association for wholesale trade in machinery and tools. Since this is a single unit, subject to prior sale. Call or write to us, and we will arrange an inspection appointment as soon as possible.

Year of construction: 1987, condition: ready for operation (used), Three old Hermle and Deckel milling machines are available. 1) Horizontal milling machine Hermle FW 801, tool holder: SK40, travel X/Y/Z: 430mm/150mm/420mm, speed: 2000rpm, machine dimensions X/Y/Z: approx. 2250mm/1700mm/1500mm, weight: approx. 1000kg. 2) Universal milling machine Hermle FW 710, tool holder: SK30, table dimensions X/Y: 710mm/190mm, travel X/Y/Z: 400mm/150mm/350mm, speed: 2240rpm, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 700kg. 3) Deckel FP 2, year of manufacture: 1987, tool holder: SK40, travel X/Y/Z: 300mm/2200mm/400mm, table dimensions X/Y: 620mm/390mm, max. table load: 250kg, speed: 3150rpm, feed: 3600mm/min, rapid traverse: 4000mm/min, machine dimensions X/Y/Z: approx. 2500mm/2100mm/1800mm, weight: approx. 1250kg, control: Heidenhain TNC 355. An on-site inspection is possible. Individual sale possible, however a package sale is preferred. Iedpfx Aney I Adhocobb

Condition: used, XK400×1000 Rubber & Plastic Mixing Mill – High-Performance Two-Roll Mill Manufacturer: Wuxi Double Elephant Rubber & Plastics Machinery Co., Ltd. Model: XK400×1000 Ijdpfx Aoxrc Eqoncebb Main Technical Data: Roll diameter: 400 mm Working length: 1000 mm Front roll speed: 14.85 m/min Rear roll speed: 18.85 m/min Speed ratio: 1 : 1.27 Max roll gap: 10 mm Batch capacity: 25–35 kg Motor power: 37 kW (Siemens IE3 motor) Control system: Siemens S7-300 PLC with Profibus Length: 4400 mm Width: 1710 mm Height: 1850 mm Weight: ~8500 kg Description: The XK400×1000 Mixing Mill is a heavy-duty two-roll open mill designed for rubber and plastic compound mixing, warming, and sheeting. Built with precision alloy rolls, Siemens electrical control, and a robust gear transmission system, this machine ensures stable, low-noise operation, high efficiency, and long service life — perfect for industrial rubber production, laboratories, and plastic processing plants. Key Features: Alloy chilled cast iron rolls – HS70±2 hardness for long life Water-cooled drilled rolls with rotary joints for temperature control Low-noise gear drive with hardened gears Motorized roll gap adjustment (0.5–10 mm) Forced thin-oil lubrication system 4 emergency stop buttons for operator safety Premium Siemens control & electrical components Applications: Rubber compounding and mixing Sheet forming for rubber and plastics Hose, seal, and belt production

Condition: ready for operation (used), Tool Milling Machine / DECKEL FP 2 with 3-Axis Digital Readout - Heidenhain ND 780 - Machine in well-maintained original condition Ibjdpey R Emqefx Anceb - Travel X/Y/Z 450x230x400mm - 3-axis digital readout Heidenhain - Automatic feeds / rapid traverses on all three axes - Spindle speed range 40-2000 rpm - Universal tilting, swiveling, and rotating table - Horizontal / vertical milling setup with sliding head - Tool holder ISO 40 - Coolant system - Various tool holders & collets - Documentation Dimensions: LxWxH 1.5x1.7x1.8 meters / Weight 1600 kg Errors / input mistakes reserved

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, cutting width (max.): 3,200 mm, cutting length (max.): 2,200 mm, SUMMA F3220 – Professional Large-Format Cutting Table (2020) SUMMA F3220 - Working area: 327 x 210 cm - Vacuum extraction system 2.3 kW / Noise absorber - Package with 6 pneumatic media clamps + roll holder - Integrated camera - ADC Control module left + right Ibsdpey Sapvefx Ancob INCLUDED MODULES AND TOOLS - Tangential module (x2) - V-Cut 45° - V-Cut 0° - Heavy Duty Cutout Tool (45° / 90°) - Double Edge Cutout Tool (50° / 60°) - Pneumatic oscillating tool - Creasing tool HIGH-FREQUENCY MILLING MODULE Complete high-frequency milling kit: - Routing module with brush system - SycoTec milling motor - Integrated electronics + vacuum control - 6 mm collet Additional accessories - Industrial vacuum cleaner HERCULES 3000W

Year of construction: 2026, condition: refurbished (used), LINEAR CAGE FORMING TUBE MILL VAI 89.5(6) with universal CTA forming REVAMPED AS NEW Specifications: - Manufacturer: VAI Voest Alpine Industrieanlagenbau - Round tube diameter: 33.7 - 88,9 mm - Square tube: 30x30 - 70x70 mm - Rectangular tube: 40x20 - 100x40 mm - Thickness: 0.8 – 5.0 mm (6.0mm with S235J2) - Speed: 100 m/min Complete line with: - Double expandable mandrel with PEELER OTO AD408 SD - Strip entry line with strip opener, driven pinch-roll, pre-leveller and lateral guiding rolls - Automatic strip joiner - Intermediate strip guding stand - Break down section - Forming section : Universal CTA Forming section VAI CTA90 - Fin pass section - Welding section - Double Cooling tunnel - Sizing section - Off-Line sizing stands - Turk-head section - Motorised Exit roller conveyor Scope of supply: 1. Double expandable mandrel with PEELER OTO AD408 SD - Strip width 500mm - Hydraulic expansion - Snubber roll top/bottom - 8 Tn/arm - Pneumatic servocontrolled brake 2. Strip peeler - Strip opener 3. Strip Guiding 4. Break down section - 2 motorised stands - Monoblock casted stands - Hydraulic gauge compensation and quick setup - Shaft diameter 89mm - Mechanical SIKO indicator - Total installed power 106 kW 5. Forming section - Universal CTA Forming section VAI CTA90 6. Fin pass section - 2 motorised FP with rafted quick change - Monoblock casted stands - Hydraulic gauge compensation and quick setup - Shaft diameter 89mm - Mechanical SIKO indicator - Total installed power 106 kW 7. Welding section - 4-roll configuration - Heavy duty welding head with lateral and top adjustment 8. Double Cooling tunnel - 2 x 4000mm With V-rollers support 9. Sizing section - 4 motorised sizing cages - Total installed power 260kW - With quick-change rafted stands - SIKO bottom and top indicators 10. Off-Line sizing stands Ibjdsy Uhxkjpfx Ancsb - 4 motorised sizing cages - Total installed power 260kW - With quick-change rafted stands - SIKO bottom and top indicators 11. Turk-head section - 3 turk-heads - Heavy duty changing plates 12. Complete set of rolls Round tube diameter: 33.7 - 88,9 mm Square tube diameter: 30x30 - 70x70 mm Rectangular tube diameter: 40x20 - 100x40 mm Thickness: 0.8 – 5.0 mm (6.0mm with S235J2) Speed: 100 m/min

Condition: good (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, quill travel distance: 80 mm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 4 m/min, rapid traverse Z-axis: 4 m/min, total height: 1,900 mm, total width: 2,200 mm, total length: 2,600 mm, table width: 320 mm, table length: 650 mm, rotational speed (max.): 4,000 rpm, rotational speed (min.): 20 rpm, overall weight: 2,000 kg, Equipment: rotational speed infinitely variable, Technical Data: Ibjdezl An Sjpfx Anceb 1. Working Area & Travel Ranges X-axis: 500 mm Y-axis: 400 mm Z-axis: 300 mm Quill stroke: 80 mm / 100 mm (manual/hydraulic) 2. Spindle Tool holder: SK 40 / ISO 40 Tool clamping: Hydraulic (quick-change system) Speed range: continuously variable from 20 to 4,000 rpm Milling head swivel range: ± 90° 3. Feeds & Drive Feed range: continuously adjustable from 1 to 3,000 mm/min Rapid traverse speed: approx. 4 to 6 m/min Spindle drive power: approx. 5 kW Total connected load: 12 kW to 24 kVA 4. Control & Electrical System Standard CNC control: Philips CNC 432 3D path control with graphics display, very popular for workshop programming with standard cycles such as circular pockets, groove milling, and drilling cycles Measuring system: Direct optoelectronic length measuring system, Heidenhain scales in all three axes 5. Table Options NC rotary table: approx. 650 x 320 mm 6. Dimensions & Weight Machine weight: 2,000 kg Footprint (L x W x H): approx. 2.6 m x 2.2 m x 1.9 m Transportation and loading can be arranged upon request for an additional charge, throughout Europe. Prices plus VAT Inspection possible by appointment. Contact us, our team will be happy to assist you further. Trade-in or exchange possible! Machine Purchase/Sale BUYING / SELLING PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: good (used), Year of construction: 1984, Water slot milling machine, water slot milling machine -Three-spindle -electropneumatic circuit -pneumatic workpiece clamping Ibodpfx Asx R Sv Soncjb -Fine adjustment via spindles and handwheels

Condition: excellent (used), Year of construction: 1982, functionality: fully functional, Universal Milling Machine Deckel FP3 with 3-Axis Active Digital Readout (Heidenhain) and Infinitely Variable Feed, Original Excellent Condition Technical Data: >> Year of manufacture: 1982 Machine no. 2201-5527 >> Swivel-tilt-rotary table >> Speed range: 25 - 2500 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in all 3 axes >> Drive power: 2.0 / 4.0 kW >> Spindle brake Ibsdpfxjy Eqkzj Ancob >> Travel X/Y/Z: 500/300/400 mm >> Vertical milling head can be displaced 200 mm on spindle carrier >> Vertical and horizontal quill, SK40, extendable >> Pull stud system: M16 >> Weight: approx. 1,500 kg Accessories and Equipment: >> 3-axis active digital readout Heidenhain TNC113 >> Coolant system >> Central lubrication About the machine: Offered here is a universal milling machine Deckel FP3 in very good original condition. The machine shows minimal backlash and all spindles move smoothly. On this newer FP3 model, the feed is infinitely variable in all three axes, and each axis features rapid traverse. A significant advantage is the active 3-axis digital readout. With the Heidenhain positioning control, you can enter dimensions and the machine will automatically move to defined positions. An oil change has been performed. Mechanically and electrically inspected. The Heidenhain digital display makes operation easier and even more precise. You are welcome to inspect and test the machine under power at our site. The machine is available immediately.

Condition: new, Year of construction: 2026, A superfine ball mill is a type of milling machine that is used to grind materials into very fine particles. This type of ball mill has some distinctive features that make it especially suitable for processing even the hardest materials with low contamination and minimal wear. It is commonly used in various industries, including pharmaceuticals, minerals, pigments, and chemicals, for producing micro powder or nanoparticles. Here are some key features and considerations for a superfine ball mill for micro powder: 1. High Grinding Efficiency: Superfine ball mills are designed to achieve high grinding efficiency by utilizing grinding media with a relatively small size, leading to a large surface area for grinding. 2. Precision Control: These mills often come with advanced control systems to regulate parameters like rotation speed, temperature, and grinding time, allowing precise control over the particle size distribution. 3. Specialized Design: The mill is typically designed with features to minimize contamination, such as using materials resistant to wear and corrosion. Some mills also have cooling systems to prevent overheating during the milling process. 4. Variety of Materials: Superfine ball mills can handle a wide range of materials, including both brittle and fibrous substances. They are often used for milling hard materials that require fine grinding, such as ceramics, minerals, or pigments. 5. Size Reduction to Micro or Nano Level: The primary goal of a superfine ball mill is to reduce particle size to the micro or even nano level. This is achieved by the intense grinding action that occurs within the mill. Isdpfx Anjq Nf Uwscjbb 6. Classifier System: Some superfine ball mills incorporate a classifier system to control the particle size distribution more precisely. This allows for the separation of fine particles from coarser ones during the milling process. 7. Batch or Continuous Operation: Depending on the specific design, these mills can operate in either batch or continuous mode, offering flexibility based on the production requirements. 8. Safety Measures: Safety features may be included, such as monitoring and control systems to prevent overloading, overheating, or other potential issues during operation. When selecting a superfine ball mill for micro powder production, it's important to consider the specific requirements of your application, the characteristics of the materials you're working with, and the desired final particle size distribution. Always follow the manufacturer's guidelines for operation, maintenance, and safety to ensure optimal performance and longevity of the equipment.

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, Universal Milling Machine Deckel FP3 with 3-Axis Active Digital Readout TNC 113 by Heidenhain and Infinitely Variable Feed—Excellent Condition Technical Data: >> Year of manufacture: 1983 Machine no. 2201-5919 Ijdey D Tl Ispfx Ancobb >> Fixed angle table (reconditioned) >> Speed range: 25 – 2500 rpm >> Infinitely variable feed on all 3 axes >> Rapid traverse on all 3 axes >> Drive power: 2.0 / 4.0 kW >> Spindle brake >> Travel (X/Y/Z): 500 / 300 / 400 mm >> Vertical milling head movable on spindle head by 200mm >> Vertical and horizontal quill—SK40 extensible >> Pull-in system S20 x 2 >> Weight approx. 1500 kg Equipment and Accessories: >> 3-axis active digital readout Heidenhain TNC113 >> Coolant system >> Central electric lubrication About the machine: Offered here is a Universal Milling Machine Deckel FP3 in very good condition. The machine has very little backlash and all spindles move smoothly. On this newer FP3 model, the feed is infinitely adjustable in all three axes, and the machine also features rapid traverse for each axis. A major advantage is the active 3-axis digital readout. With the Heidenhain control, you can input dimensions that the machine will automatically position to. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain DRO makes operation both easier and even more precise. Take advantage of the opportunity to inspect and test the machine under power on site. The machine is available immediately.

Condition: used, Year of construction: 1987, Used machine Year of manufacture: 1987 Condition: completely inspected by the workshop Table size 2000 x 880 mm (entire table in a cast construction) with extendable frame support Drive motor with pole change, 5/6 kW Spindle speeds 3000/4500/6000/9000 rpm Vertical adjustment of the milling spindle 110 mm Isdpfx Anez Dcp Djcebb Swivel angle of the milling spindle 45° with Holz Her 3-roller feed mechanism Pictures show the machine in a condition prior to refurbishment. Availability: approximately 3-4 weeks after order receipt Location: Flörsheim

Condition: good (used), Year of construction: 2015, CNC milling machine, milling and engraving machine, MECANUMERIC, MECA EASY 1510 – used: Price ex works: €23,500 (net)! Manufacturer: MECANUMERIC Type: MECA EASY 1510 Year of manufacture: 2015, former DEMO MACHINE Three-axis milling machine in a flat-bed gantry design. Working travels X, Y, Z axes: 1,050 / 1,550 / 200 mm. Table frame and gantry: Designed as a solid, stress-free, fully welded steel structure, powder-coated. Heavy table substructure for mounting the vacuum table VAC-CAISSON, designed as a cassette, with air passage holes in a 10 mm grid. Feed rate: 300 mm/sec (18 m/min) in rapid traverse and feed mode! Guidance on rails, slide shoes with upstream ball screw. Transmission: Precision ball screws Ball screw on all axes Maintenance-free, brushless servo drive motors (750 W on X and Y, 300 W on Z) Repeat accuracy: +/- 0.025 mm Mechanical resolution: 0.0006 mm Numerical control: Mecanumeric CN 7000 ISO-G-Code Machine operation via a 10" touch screen display Complete documentation and CE declaration of conformity in accordance with the basic safety and health requirements of Vacuum table 1,020 x 1,500 mm Support/work table designed as a closed aluminum plate, on which vacuum passage holes are arranged in a 10 mm grid. The table is divided into 2 main areas, which can be switched on manually. Vacuum generation by one (1) two-stage high-performance vacuum side-channel compressor. Motor power 4.5 KW, suction capacity 320 m/hour, filter and silencer included. Due to the overall size and potential heat development, the pumps are housed outside the machine body. The electrical control and safety devices for the pump and valves are integrated in the machine control cabinet or on the control panel. Milling spindle Ibjdpjzbybijfx Ancjb HF40-ATC24 ENC Conversion Module APSG-A Vacuum generation by one (1) two-stage high-performance vacuum side-channel compressor. Motor power 4.5 KW, suction capacity 320 m/hour, filter and silencer included. Due to the overall size and potential heat development, the pumps are housed outside the machine body. The electrical control and safety devices for the pump and valves are integrated in the machine control cabinet or on the control panel. High-frequency motor milling spindle 4KW Power: 4KW Speed range: up to 24,000 rpm. Fast tool change with pneumatic ejection, ISO30 taper. Tool holder: Clamping diameter up to 2-16 mm. Cooling with compressed air 6 bar 20 m/h Converters and switching elements are included in this position. Safety enclosure for the machine Front with door and safety lock - Position PROTCHOC omitted - Preparation of the electrical control and switching elements as well as the output socket for a high-performance industrial vacuum cleaner. Changer CH 6 S Condition: good Available: immediately Location: Delmenhorst

Condition: used, CNC Milling Machine DECKEL Type FP 3 A Tool-tool milling machine with handwheels, also for conventional operation Serial No. 2206 - Built in 1982 GRUNDIG CNC 2101 CNC control system Travel paths X: 490 mm, Y: 300 mm, Z: 340 mm Table size 705 x 425 mm Spindle mount SK 40 Quill stroke 100 mm Spindle speed 25 - 2500 rpm, 21 steps Feed rate 5 - 500 mm/min, continuously variable Rapid traverse speed 1200 mm/min Spindle motor power: 2/4 kW, pole-changing Power supply: 380 V, 50 Hz - GRUNDIG CNC 2101 CNC control system - Mechanical handwheels for all three axes - Universal tilt-and-turn table Ibodpfxev R E Rdo Ancob - Vertical milling head tilts and is manually adjustable by 200 mm - Hydro-mechanical tool clamping - Coolant system in the machine base - Protective enclosure at the front and sides with three hinged doors - Control cabinet adjacent (L x W = 600 x 430 mm) Space requirement: L x W x H: 1900 x 1700 x 1950 mm Weight: 1700 kg (machine 1540 kg + electrical cabinet 160 kg) Very good condition

Condition: used, Year of construction: 2016, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: -, overall weight: 1,000 kg, total length: 3,500 mm, total width: 500 mm, total height: 1,200 mm, input voltage: 400 V, type of input current: three-phase, cutting speed: 50 mm/min, The Oddy Novatek 2 Pocket Roll Plant with Pinner is used to automatically divide, round, shape, and mould raw bread dough into uniform rolls and buns at high speeds. It replaces the labor-intensive process of scaling and shaping dough by hand, making it a staple machine for small-to-medium commercial bakeries, wholesale bakers, and supermarket in-store bakeries. 1. Primary Functions: Dividing: It automatically cuts a bulk mass of dough into precise, equal weights without tearing the dough structure. Rounding: It rolls the divided dough portions into tight, consistent round dough balls (baps, dinner rolls). Pinning & Moulding: The integrated "pinner" section flattens and rolls the round dough pieces into elongated shapes (finger rolls, hot dog buns). 2. Specific Bakery Products It Creates: By changing the internal moulding drums or adjusting the pinner belts, bakeries use this machine to produce: Round items: Hamburger buns, traditional baps, dinner rolls, and slider buns. Elongated items: Hot dog rolls, finger rolls, bridge rolls, submarine rolls, and miniature baguettes/batards up to 230mm long. Ibjdpfxez Ad Dcs Anceb 3. Why Bakeries Use It (Key Benefits): Massive Labour Savings: It can produce up to 6,000 rolls per hour (100 rolls every minute), a volume that would require a large team of bakers to do manually. Cost Efficiency (Oil-Free System): Unlike traditional dividers that require expensive food-grade divider oil to keep dough from sticking, the Novatek uses a completely dry, oil-free process. This saves thousands of pounds annually in oil costs and makes cleanup much easier. Product Consistency: Every roll comes out exactly the same weight (from 10g up to 208g in 2-row mode) and the same shape, which ensures uniform baking times and presentation. Physical Dimensions & Spatial Footprint: Standard Operating Footprint: Typically occupies a width of 0.8 m to 1.2 m and a base chassis length of 1.5 m to 2.5 m. Extended Length with Integral Pinner: When configured with the long-bed outfeed pinner/moulder belt assembly, the total inline workspace length requires approximately 3.2 m to 3.8 m to clear the outfeed table. Operating Height: Roughly 1.6 m to 1.8 m to the top rim of the bulk dough feed hopper to facilitate ergonomic manual or conveyor loading. Total Net Weight: Approximately 950 kg to 1,200 kg depending on the configuration of heavy-duty plunger blocks, internal moulding drums, and chassis reinforcement. Operational & Production Capabilities. Throughput Capacity: Processes up to 50 dough pieces per minute per row. For a standard 2-pocket (2-lane) configuration, this delivers a maximum output of 6,000 pieces per hour. Hopper Capacity: Features a standard integrated bulk dough conveyor hopper that accommodates 55 kg of raw dough. Scaling Ranges: 2-Row Operation: Scales between 10 g and 208 g simultaneously across both lanes. 1-Row Operation: Reaches 208 g to 500 g utilising lane blanking and larger interchangeable plunger blocks. Pinner Capabilities: Accurately stretches and shapes rounded dough pieces into finger rolls, hot dog buns, or miniature batards up to a maximum length of 230 mm. Utility & Facility Requirements: Electrical Supply: Requires a standard industrial 3-phase 400V, 50Hz electrical hookup.

Condition: used, Year of construction: 2013, functionality: fully functional, travel distance X-axis: 15,000 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 180 rpm, total length: 15,000 mm, table width: 3,300 mm, table length: 15,000 mm, drilling capacity: 28 mm, rotational speed (max.): 4,000 rpm, rotational speed (min.): 180 rpm, rapid traverse X-axis: 35 m/min, rapid traverse Y-axis: 12 m/min, Equipment: rotational speed infinitely variable, COLLECTIVE LISTING - 3 FICEP EXCALIBUR CNC BEAM DRILLING LINES Three refurbished CNC single-spindle beam drilling lines from the Ficep Excalibur series: two Excalibur 12 (1201 DE, year 2013) and one Excalibur 6 (601 DE, year approx. 2011). Together they form a graduated profile-processing line (up to 1,200 mm and up to 610 mm). EACH MACHINE AVAILABLE INDIVIDUALLY OR AS A PACKAGE. CONDITION & REFURBISHMENT (all three lines) All three machines have been refurbished and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies per machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machines reconditioned - no demonstration under power). === MACHINES 1 + 2: FICEP EXCALIBUR 12 / 1201 DE / YEAR 2013 === Two identical lines, serial numbers 33900 and 34062. CNC single-spindle beam drilling line based on the moving-column principle. The moving drill head with direct drive performs drilling, countersinking, tapping, milling and scribing in a single pass. - Profile cross-section: max. 1,200 x 800 mm, min. 50 x 50 mm | length up to 12 m | CE - Profile shapes: I-beams, channels, angles, flat bar, square/rectangular hollow sections - Drill head: 1, direct drive, 19 kW | 180-4,000 rpm | max. drilling diameter 28 mm - Drilling feed: ball screw, servo-driven | CNC axes: 5 - X-axis: travel 0-15,000 mm, 35 m/min | Y-axis: 12 m/min | rack and pinion - Tool changer: 6-position automatic (ATC), HSK A80 - Clamping: hydraulic double-acting | Profile detection: laser, non-contact - Coolant internal (through spindle) and external - Control: Ficep Pegaso CNC (PC/CNC/PLC integrated), remote diagnostics via network - Interfaces: DSTV, DXF, XML (Tekla) | Table: 15 m long, approx. 3,300 mm wide Scope of delivery per line: drilling unit 19 kW | support table with guide rail 15 m | 6-position ATC (HSK A80) | Pegaso CNC | radio remote control | coolant system. === MACHINE 3: FICEP EXCALIBUR 6 / 601 DE / YEAR APPROX. 2011 === Serial number 32754. More compact line with moving drill cabin, workpiece stationary on the clamping frame. - Profile cross-section: max. 610 x 610 mm, min. 30 x 30 mm | I-beam web height up to 610 mm - Max. machining length: 12,000 mm | X-axis traverse 0-12,000 mm, rack and pinion - Profile shapes: I-beams, angles, UPN channels, flat bar, square/rectangular tube - Drilling spindle: 1, 7.5 kW | max. drilling diameter 22 mm | manual change (quick-change chuck) - Operations: drilling, countersinking, tapping (with suitable tooling) - Clamping: double-acting automatic (top/bottom), min. 30 x 30 mm - Control: Mitrol CNC (Ficep Group) Scope of delivery: beam drilling line 601 DE | Mitrol CNC | traverse frame 12,000 mm | length measuring/positioning system X-axis (configuration confirmed during inspection) | automatic clamping system | quick-change chuck. Machine weights, rated voltage and footprint per line follow on request. LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM): specialist for refurbished Ficep structural-steel machinery. Further machines on request. Isdpfx Aev Iamzoncebb CONTACT / INQUIRY Price on request - individually or as a package | Viewing by arrangement. Sale exclusively to commercial customers (B2B).

Condition: excellent (used), CATALOGUE NUMBER 8010 TECHNICAL DATA Equipment: Ibjdpfx Anszw Dx Aocsb - table - pre-milling - belt feeder - 2 glue tanks: for granules and cartridges - currently, the machine uses hot melt adhesive (granules) - guillotine – for pre-cutting veneer - 3 pressure rollers - 2 trimming units with saws for final trimming - 2 milling units for edge shaping (radius cutters) - corner rounding unit - sanding units – for removing excess glue - polishing units - stepless feed rate adjustment 8-18mm - workpiece thickness 6-45mm - minimum workpiece length 180mm - minimum workpiece width 600mm - maximum veneer thickness fed from a roll 3mm - air consumption 6-8 bar - dust extraction nozzle diameter 7x80mm, 1x130mm - dimensions L/W/H 6650x1260x1700mm - weight 1850kg ADVANTAGES – Made in Germany – Spray system – Pre-milling and corner rounding – 2 glue tanks – Includes 4 additional milling cutters – Unpainted – Original technical documentation and CE marking – Very good condition – Used veneer edging machine Net price: 49900 PLN Net price: 11880 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: new, functionality: fully functional, Year of construction: 2026, Electromechanical Plate Rolling Machine ESR 1300 × 4.5 mm with Asymmetric Rolls The ESR 1300 × 4.5 mm electromechanical plate rolling machine with asymmetric rolls is designed for manufacturing cylindrical and conical shells with various diameters. The machine is intended for bending metal sheets with a maximum thickness of 4.5 mm and a working length of up to 1300 mm. The upper roll diameter is 120 mm. Three-roll bending machines from this series are highly popular due to their relatively simple yet functional construction, offering reliable performance and versatility for a wide range of metalworking applications. Machine Features Asymmetric roll arrangement for easier sheet positioning and efficient bending. Upper and lower rolls driven by an electric motor through a gear system and chain transmission. Upper roll rotation in both directions with a tilting and opening mechanism for easy removal of finished workpieces. Height-adjustable lower and side rolls with manual adjustment. Cone bending capability for producing tapered components. Foot pedal control unit with an emergency stop button for safe and convenient operation. Construction and Technology The chain drive transfers rotation from the electric motor to the rolls, ensuring reliable power transmission and smooth operation. The upper roll is equipped with a folding mechanism, which allows quick and easy removal of completed cylindrical and conical parts. The folding roll is fitted with a locking system that prevents accidental opening during operation, improving safety and stability during the bending process. Technical Specifications Parameter Value Model ESR 1300 × 4.5 mm Maximum working width 1300 mm Roll diameter 120 mm Maximum material thickness 4.5 mm Motor power 2.2 kW Dimensions (L × W × H) 1810 × 640 × 1050 mm Weight Approx. 660 kg (±2%) Standard Equipment Foot pedal control unit Ijdpfx Aew H Rqyjncsbb User manual CE Declaration of Conformity Manufacturer: CORMAK