Used Three Knife for sale (1,700)

Year of construction: 1993, condition: good (used), Built in: 1993 Size: 350 x 440 mm Speed: 6.600 c/h Equipment: • right hand infeed equipment for changing the format: • 1 set of pressing plates & holders • 1 set of size extensions • 1 set of table quick change plates Fedjdym Svjpfx Ab Tsgk • 3 sets of cutting sticks • 2 set of knives • info: with cassettes

Condition: good (used), Cutter head, milling cutter holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, shoulder milling cutter -Cutter head: face milling cutter cutter head corner milling cutter -Type: Ø 100 mm -Hole: Ø 40 mm -Number: 4x milling head available -Price: per piece -Dimensions: Ø 100 x 50 mm Fedpfx Ajwld Rkob Togk -Weight: 1.3 kg/piece

Condition: excellent (used), Year of construction: 2019, Ref: 10965 . 2019 Horizon HT-1000V Variable Trimmer ONLY 1.7M books trimmed! Inline or offline variable three-knife trimmer capable of zero make-ready on book trim size and thickness changes. Perfect for short run production, and book of one production which can be achieved through barcode driven set-up. Features: Setup automatically on the fly by reading a barcode at the entrance of the trimmer. Fedswu Sptjpfx Ab Tegk Also capable of automatic set-up from the operator panel for same size production runs. One-to-one book production with variable sizes can be produced. Both untrimmed and trimmed sizes can be variable, for true variable format production. Can be used solo or placed in-line with Horizon perfect binders. Specification: Untrimmed Book Size: Max. Spine Length 350 x Fore-edge Length 320 mm/ 13.780” x 12.600” Limitation: Maximum length from the center to top or bottom is 175 mm/ 6.889”. Min. Spine Length 148 x Fore-edge Length 105 mm/ 5.825” x 4.130” Limitation: The minimum length from the center to top or bottom is 74 mm/ 2.91”. Trim Width: Fore-edge: Max. 110 mm/ 4.330” Min. 1 mm/ 0.04” Top and bottom: Max. 80 mm/ 3.150” Min. 1 mm/ 0.04” Trim Height: 1 to 65 mm/ 0.04” to 2.560” Production Speed: 400 to 1,000 cycles per hour (Higher production can be reached with piled books)

Condition: good (used), Year of construction: 1971, with magnetic table max. grinding length 2500 mm Fgjdpfomccvaox Ab Tek a frequency converter was retrofitted for infinitely variable speed of the grinding motor also a paper filter was retrofitted for filtering the cooling water

Condition: like new (used), functionality: fully functional, Wadkin Visage blade grinding machine, Fgjdpfxsw Dqngs Ab Tjk Machine in excellent condition, extremely little use, condition close to new Can be seen in operation at our premises Price includes loading of the equipment Transport and installation possible at extra cost.

Year of construction: 2024, condition: new, Super Dumbbell – the ultimate punching knife with replaceable precision cutting blades Super Dumbbell has a spring type ejector, is equipped with 5 sets of precision spare blades and therefore represents a set of six punching knives in total. It is ideally designed for manual and pneumatic presses. Excellent price-performance-ratio “6 knives for the price of 1” Fgodpjki Tqcsfx Ab Tok Replaceable precision cutting blades • Japanese carbon steel: ultra-hard – ultra-sharp – maximum cut resistance • Easy replacement • No regrinding • No downtime • Ultra-thin symmetrical cutting blades minimize concave test specimen cross sections (Fig. 1) • No more premature tearing of the test bars • Up to 10 % higher tensile strength or elongation at break values • Extremely smooth cut surfaces of test specimens (Fig. 2) • Always available separately Guarantee for: • High-precision test specimens • Reliable and reproducible test results Ideally suited for: • High polymer materials such as rubber, plastics, etc. • Standards of all kinds, such as ISO, DIN, JIS, ASTM, IEC, etc.

Condition: good (used), Size: max 460 x 315 mm Fgedpfjd S Svbjx Ab Tek Size trimmed: max 430 x 300 mm min 80 x 50 mm False opening: max 140 mm Feeding height: max 120 mm Speed: max 1.500 c/h Power requirements: 3 kW (220/380V, 50Hz) Motor: max 220/380 V Motor: 50 Hz Width: 2.050 mm Depth: 2.220 mm Height: 1.615 mm Weight: 2.550 kg (approx.) Equipment: automatic infeed with integrated counter stacker • 1 set of clamp plates & plate holders • 1 set cutting table extension • 1 set cutting table plates • 3 sets of cutting sticks • 2 sets of knives • 1 set of operator manuals • 1 spare part catalogue • standard equipment • 1 set of electrical diagrams • 1 set of standard tools

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 3010-015, Equipment: documentation/manual, Trivet in excellent condition. Possible purchase of a device for rounding corners Expected price 15 K euros, but I will consider any reasonable offer Fgodpowf Rbiefx Ab Tok

Condition: used, cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter Fgjdpju Ridlofx Ab Tsk -Manufacturer: Seco, Secodex face milling cutter head without indexable inserts -Type: Secodex R220.13-8160-C -Hole diameter: 50 mm / bolt circle diameter 67 x 14 mm -Dimensions: Ø 173 x 60 mm -Weight: 5.3 kg

Condition: good (used), Year of construction: 2002, Built in 2002 Size: max 310 x 400 x 80 mm Size trimmed: max 300 x 388 x 80 mm; min 100 x 120 x 2 mm Speed: max 6.000 c/h Feeding height: max 80 mm Air requirement (6 bar): 30 m³/h Length: 2.300 mm Width: 2.200 mm Height: 2.500 mm Fgsdpfx Aspgwaujb Tok Weight: 5.700 kg (approx.) Equipment copilot right hand infeed electronic counter 2 sets of knife holders 2 set of knives equipment for changing the format: 1 set of pressing plates & holders 1 set of size extensions 1 set of quick change tables 3 sets of cutting sticks Motorische Formateinstellung automatic setting from: - infeed device - book block pressure - cutting table - side knives - side gauges central lubrication standard accessories

Condition: good (used), cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter -Manufacturer: ZESPA NORMAX, face milling cutter head corner milling cutter -Type: Ø 100 mm Fjdpfx Abovz T Hzo Tegk -Hole: Ø 32 mm -Dimensions: Ø 100 x 45 mm -Weight: 1.7 kg

Condition: good (used), Cutter knife, cutter knife for chop chopper, chop cutter, dicer, multi-purpose cutter, slice and portion cutter, Fgjdpfx Abovwlzij Tek -Manufacturer: Holac, cutter knife -Type: 29-0228-0/1 -Hole: Square 26 x 26 mm -Quantity: 1x knife. available -Dimensions: 540/350/H65 mm -Weight: 4.4 kg

Condition: good (used), Circular knives, round cutting knives, machine knives, replacement knives for cutting machines -Circular blades: replacement blades for cutting machines -Blade size: 400x30x3 -Serial number: 207484 -Number: 3x knives available -Price: per piece Fgedpfxjitdine Ab Tjk -Weight: 2.9 kg/piece

Condition: good (used), Cutter knife, cutter knife for chop chopper, chop cutter, dicer, multi-purpose cutter, slicer and portion cutter -Manufacturer: Knecht, Kuttermesser -Type: R350 5 220V 0.R 230 92 -Quantity: 1x knife. available Fgsdevwlvaepfx Ab Tek -Dimensions: 390/230/H20 mm -Weight: 1.7 kg

Condition: used, cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter -Manufacturer: Seco, Secodex face milling cutter head -Type: Secodex R230.19 8250-12 -Hole diameter: 60 mm / bolt circle diameter 100 x 18 mm -Dimensions: Ø 300 x 60 mm Fsdpfx Asu Ribkob Tegk -Weight: 24.1 kg

Condition: used, cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter -Manufacturer: Seco, Secodex face milling cutter head without indexable inserts -Type: Secodex R220.13-8250-C Fgodpfxou Ricuo Ab Tsk -Hole diameter: 60 mm / bolt circle diameter 100 x 18 mm -Number: 2x milling head available -Price: per piece -Dimensions: Ø 260 x 60 mm -Weight: 14.1 kg/piece

Condition: used, cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter -Manufacturer: Seco, Secodex face milling cutter head -Type: Secodex R220.13/23-8200-C -Hole diameter: 60 mm / bolt circle diameter 100 x 18 mm -Inverting plates: 12 pieces Fgodpfxeu Ridrs Ab Tjk -Dimensions: Ø 212 x 60 mm -Weight: 8.9 kg

Condition: used, cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter Fgedpfx Asu Rid Eob Tjk -Manufacturer: Seco, face milling cutter head -Type: R.52.84 01 03 -Hole diameter: 60 mm / bolt circle diameter 100 x 18 mm -Dimensions: Ø 200 x 35 mm -Weight: 4.4 kg

Condition: used, Cutter head, milling holder, carbide cutter, indexable cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter Fsdpfxoub D Rro Ab Togk -Manufacturer: Seco, Secodex face milling cutter head SK50 -Type: Secodex 220.17-0063 -Recording: SK50 -Cutter head: Ø 63 mm / 3 carbide inserts -Total dimensions: Ø 97 x 230 mm -Weight: 3.6 kg

Condition: used, cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter -Manufacturer: Sandvik Coromant, face milling cutter head corner milling cutter 2 pieces -Type: 490-125Q40-14M 725386 -Adapter: SK50x40x40 -Delivery/Price: complete -Dimensions: Ø 125 x245 mm -Weight: 6.8 kg/piece Fjdpfx Aeu Uwvuob Togk

Condition: used, cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter -Manufacturer: Seco, Secodex face milling cutter head -Type: Secodex R220.13/23-8160-C Fedou Ria Hepfx Ab Tegk -Hole diameter: 40 mm / bolt circle diameter 67 x 14 mm -Dimensions: Ø 173 x 60 mm -Weight: 6.1 kg

Condition: good (used), cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter Fgedpfxsvz T Aij Ab Tsk -Manufacturer: Sandvik Coromant, face milling cutter head, shoulder milling cutter -Type: R 282.2 160 -Hole diameter: 40 mm / bolt circle diameter 67 x 14 mm -Dimensions: Ø 160 x 62 mm -Weight: 4.9 kg

Condition: good (used), cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter Fedpfx Aevz T Thob Tsgk -Manufacturer: Sandvik Coromant, cutter head milling cutter -Type: R26Hole: Ø 27 mm -Dimensions: Ø 90 x 50 mm -Weight: 1.3 kg

Condition: used, Cutter head, milling holder, carbide cutter, indexable cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter -Handover in the current condition as inspected -Condition see pictures Fodoti Rkljpfx Ab Tsgk -Cutter head shell milling cutter: Ø 172 mm -Hole: Ø 40 mm -Bolt circle: Ø 155 mm -Total dimensions: Ø 172 x 75 mm -Weight: 7.2 kg

Condition: used, Replacement knife for table shears, replacement blades, cutting knives, shear knives -Number: 2x knives available -Angle honed: 90° -Dimensions: 20 x 80 mm -Lengths: 2x 2397 mm -Hole spacing from: 73/125/200/200/200/200/200/200/200/200/200/200/200/125/73 mm Fedpfx Aocn Shqjb Tegk -Threaded hole -Price: complete -Weight: 56 kg