Used Threaded Drill for sale (6,220)

Condition: excellent (used), Control : Heidenhain TNC 426 Bwodetp S R Hspfx Abbjh Dimensions Space requirement (WxDxH) 1.92x1.85x2.4 m Weight Weight approx. 2'400 kg Working range travel lengthwise X-axis 500 mm Transverse travel Y-axis 255 mm Quill stroke (controlled) Z-axis 147 mm Quill stroke (manual) Z-axis 160 mm Machine head travel W-axis 500 mm Feed rates Speeds: Rapid traverse - X- and Y-axis 1-11,000 mm/min - Z-axis 1-6,000 mm/min - W-axis 1-3,600 mm/min Feed forces - X- and Y-axis 6'500 N - Z-axis 8'000 N Rapid traverse - X- and Y-axis 11 mm/min - Z-axis 6 mm/min Displacement measuring system Direct measuring system via linear scale X / Y / Z axis Resolution Indirect measuring system via rotary encoder Z axis Resolution in X-, Y-, Z- and W-axis 0.001 mm Accuracy of position tolerance P axis(es) X / Y 0.005 mm Position spread Ps axis(es) X / Y 0.003 mm Z / W 0.005 mm Table clamping surface (lxw) 885 x 320 mm Working area T-slots: - Number 5 - - Width 12-H8 mm - Spacing 50 mm Permissible table load 250 kg Table height from floor 1040 mm Distance table-spindle nose (min-max) 0-120-620 mm Horizontal projection 300 mm Work spindle Quick-change tool system SF 32 - Hydraulic tool change via push buttons - - Repeat accuracy 0.002 mm - Changing time (manual) approx. 5 sec Speed range (infinitely variable) 50-9,000 rpm Drive power 7.6 kW Max. Torque 65 Nm Cutting capacity Drilling capacity ø 25 mm Thread cutting M 20 - Shuttering Semi-shuttering with sliding doors - - Coolant Coolant: Lubrication - External tank, capacity 100 l - Pump flow rate 75 l/min Central lubrication system Vogel

Condition: excellent (used), Surface of the base plate 880 x 700 mm Distance from spindle center to stand min./max. 220 / 620 mm Drill spindle: 13 mm passage Inner cone MK 3 Bedpsuigzpofx Abbjwh Stroke 150 mm Spindle speeds 25 - 2560 rpm. Spindle feeds 0.06 - 0.12 - 0.25 mm/rev Motor power (1500/3000 rpm) 1.2 / 1.5 HP

Condition: excellent (used), Control: Heidenhain TNC 124 Travel X/Y/Z: 450/260/120 mm W-axis travel: 450 mm Clamping surface (L x W): 770 x 320 mm Permissible table load: 100 kg Bsdpfx Asipmmuebbewh Distance table – spindle nose (min. – max.): 0 – 110 – 560 mm Feed rate X/Y: 1 – 2000 mm/min Quick-change tool system: SF 32 Stepless speed range: 100 – 9200 rpm Drive power: 5 kW Required space (W x D x H): 1500 x 1480 x 2330 mm

Condition: excellent (used), - Digital display Heidenhain Bwodev E D Ttjpfx Abbeh - Accessories available Travel paths: X – path 280 mm Y – path 210 mm Cross table KS 255 D Spindle speeds 135 – 4,500 rpm

Condition: excellent (used), Heidenhain TNC 124 control system Bodpfx Aewk Edpobbowh X/Y/Z travel 450/260/120 mm W travel 450 mm Clamping area (L x W) 770 x 320 mm Permissible table load 100 kg Distance table to spindle nose (min. – max.) 0 – 110 – 560 mm Feed rate X/Y 1 – 2000 mm/min Tool quick-change system SF 32 Speed range continuously variable 100 – 9200 rpm Drive power 5 kW Space requirement (W x D x H) 1500 x 1480 x 2330 mm

Condition: used, Accessories available. Fehlmann cross table KS 240 Drilling quill digitalized table size 530 - 240 mm X - path 280 mm Y - path 180 mm Speed electronic, stepless with potentiometer 132 - 4500 rpm Bwodpoci Auvefx Abboh

Condition: used, >> Condition very good! >> Speed: 45 - 4000 rpm. Bedpfob Ecm Tox Abbewh >> Fehlmann cross table: 380 x 750 mm >> XYZ: 420/300/500 mm >> Motorized height adjustment of the drilling head

Condition: used, -Turret fence -Thread cutter table 600 x 320 mm Bwedpfecyaq Eex Abbjh Speed 40-3600 RPM Spindle diameter 65 mm Recording Aciera quick-change system Spindle stroke 120 mm Dimension WxDxH 90 x 130 x 185 cm Weight 800 kg

Condition: used, -Turret fence -Thread cutter table 600 x 320 mm Speed 40-3600 RPM Spindle diameter 65 mm Recording Aciera quick-change system Spindle stroke 120 mm Dimension WxDxH 90 x 130 x 185 cm Bsdpfx Abjc Ndntjbswh Weight 800 kg

Condition: new, - Speedometer Digital - Depth indicator Digital Maximum drilling capacity 30/35 mm Max threaded drilling capacity M12/M20 Spindle stroke 130 mm Spindle cone Morse 4 Max distance between spindle and table 790 mm Distance between spindle axis and column 308 mm Spindle stick Vertical stroke of the spindle stick 130 mm Spindle speed 1-160-1000 rpm. Bsdpjd Slyfsfx Abbowh 2-320-2000 rpm. Dimensions of the plate 350 x 440 mm Dimensions of the upper plate 570 mm Engine power 2.7/1.7 kW Weight 305 kg Dimensions 400x900x1900 mm

Condition: excellent (used), Year of construction: 2012, CNC Drilling Machine SCM Morbidelli Uniflex HP - Precision and Efficiency in Woodworking We offer for sale a used CNC drilling machine SCM Morbidelli Uniflex HP from 2012. This technologically advanced device is ideal for precise and efficient drilling in wood and wood-based materials. The SCM Morbidelli Uniflex HP is an excellent solution for manufacturers of furniture, stairs, interior design elements, and companies involved in large-scale woodworking. Key Parameters and Features of the SCM Morbidelli Uniflex HP CNC Drilling Machine: ● Manufacturer: SCM Group ● Model: Morbidelli Uniflex HP ● Type: CNC Drilling Machine ● Year of Production: 2012 ● Condition: Used ● Working Area: ○ X: 3000 mm ○ Y: 1300 mm ○ Z: 80 mm ● Number of Separate Aggregates: 4 ● Drills: ○ Vertical: 96 ○ Horizontal X: 32 ○ Horizontal Y: 8 Additional Information: ● The machine is fully functional and ready for work. ● Possibility to view and test the machine. Bodov Ezfyopfx Abbewh Keywords: CNC drilling machine, SCM Morbidelli Uniflex HP, CNC drilling, woodworking, wood machines, SCM Group, Morbidelli, CNC drill, furniture manufacturing. Please contact us for detailed information and to arrange a visit.

Condition: ready for operation (used), Year of construction: 1977, Asquith ODI Mk2 14/54 5MT Radial Arm Drilling Machine Spindle centre to column centre max. 54" Spindle travel 14″ Spindle taper 5 MT Spindle speeds (16) 40-2040rpm, Spindle motor 5.5 HP Spindle emergency brake Power elevation of arm Power locking to arm and head Box Table Coolant 415V Electrics 1977 For sale with Jet Machinery Ltd Jet Machinery Stock No: #79026 Machine Serial Number: P.33677 Bedpfx Aoyg Skasbbswh Cost: £6,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 1993, bore capacity in steel (diameter) 40 / 23 mm throat 320 mm bore stroke 180 mm 4 speeds 30 - 765 U/min table-size 720 x 550 mm weight 480 kg dimensions 750 x 900 x 1900 mm Equipment: Bjdpfx Aoyfwzujbbewh - Multi-spindle head, drill Ø 23 mm - automatic feed - coolant device - infinitely variable speed - adjustable drilling depth stop

Condition: used, bore capacity in steel (diameter) 23 mm throat 220 mm bore stroke 120 mm Bwjdjyfwunspfx Abbsh Number of revolutions 25 - 3.200 U/min distance Spindlenose and center of table 275 mm table surface area 300 x 355 mm T-slots 3x T - slots distance 120 mm column diameter 110 mm weight of the machine ca. ca. 120 kg dimensions of the machine ca. 0,8 x 1,0 x 1,9 m Table Drilling Machine IXION - BT 23 ST - incl. base cabinet

Year of construction: 2007, condition: excellent (used), functionality: fully functional, IMSA DEEP HOLE DRILLING MACHINE MODEL MF 1000 BB TRAVELS: LONGITUDINAL AXIS: 1250 mm Bjdeyft Haopfx Abbowh CROSS AXIS (MILLING QUILL): 380 mm CROSS TRAVEL OF HEAD: 500 mm VERTICAL TRAVEL: 1000 mm ROTARY TABLE SIZE: 1000x800 mm TOTAL MACHINE WEIGHT: 20,000 kg

Condition: good (used), Year of construction: 1998, Universally applicable frame dowel and slot drilling machine with angle adjustment Especially designed for stair construction, window manufacturing, and versatile applications thanks to pneumatic height adjustment. Angled dowelling and spindle drillings, such as for balusters, can be easily accomplished with the swiveling drilling unit. Motor with pole switching, two speeds Motor power: 1.0 / 1.5 kW, 1400 and 2800 rpm Motor start via convenient handle switch Equipped with Röhm two-jaw chuck, 1 - 20 mm Linear laser for precise workpiece positioning Drilling unit can swivel 65 degrees left and right Pneumatic adjustment of working height allows dowelling on two levels without repositioning. Desired drilling heights can be set for each drilling level via digital counter, switching between levels is pneumatic and operated from the front Cross adjustment 340 mm, infinitely variable or in 12 mm increments via indexing rail Pneumatic clamping possible at any point, operated from the front Maximum height adjustment approx. 100 mm above table height Drilling stroke approx. 200 mm 2 pneumatic workpiece clamps, 1 clamping column repositionable to the front 2 swiveling workpiece supports Extraction funnel Bwjdsxmatnjpfx Abbeh Central stop + 1 side stop Fixed mitre stop Length stop as round rod Assorted drill bits Operating manual CE mark Machine was partly repainted due to paint splashes. Pneumatic hoses replaced Dimensions: approx. 1200 x 1350 x 1600 mm (LxWxH), weight 380 kg. The machine can be viewed and demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller."

Condition: used, Year of construction: 2007, total width: 1,400 mm, total length: 1,200 mm, total height: 1,700 mm, Empty weight: 250 kg Bedjyfnazspfx Abbswh - Year: 2007 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 1698 - Main motor power [kW]: 1.1 - Table length [mm]: 600 - Table width [mm]: 1150 - Number of spindles [pcs]: 18 - Workpiece clamps [pcs]: 4 - Workpiece support/Guide: Traverses - Transport dimensions: 1200mm x 1400mm x 1700mm (l x w x h) - Transport weight [kg]: 250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, 2-spindle vertical drilling machine Bwsdpfsyg Ix Tjx Abbjh

Condition: good (used), Year of construction: 1987, travel distance X-axis: 11,500 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 2,000 mm, x-travel 11,500 mm y-travel 4,500 mm w-axis 1,600 mm z-axis 2,000 mm Bjdpfx Ajyg Idisbbjwh Spindle diameter 200 mm Rotary table 3,000 x 4,000 mm Bed length of rotary table 4,600 mm Tool holder SK50 Workpiece weight on rotary table 80 t Total power requirement 83 kW Additional information incl. 15 plates

Condition: used, The KNUTH KSR 50 VT is a high-performance radial drilling machine that belongs to the Radial Drilling Machines category. Designed with "Tool to the workpiece" in mind, this machine offers exceptional flexibility with clamping surfaces on three sides to accommodate various applications. Built from thick-walled high-grade cast iron, the KSR 50 VT features a robust structure, ensuring durability and precision during operation. The electronically controlled servo quill feed and large touchscreen display enhance user experience, allowing for seamless adjustments of machining parameters. Ideal for single and small series production, it shines in maintenance activities and tool as well as steel construction. With a drilling capacity of 50 mm and a table setup area of 1,200 x 505 mm, the KSR 50 VT is versatile enough for diverse tasks. Buy now to elevate your drilling capabilities with this advanced radial drilling machine. Bodpfxeyfl Uvo Abbjwh

Condition: new, Year of construction: 2026, Plasma sheet cutting, combined with drilling and tapping Heavy-duty gantry type cutting system combined for drilling, plasma and oxy-fuel cutting applications. Double-side drive, precise positioning system with rack and pinion on 3 linear axes and zero-backlash on the torch rotational axes. Reinforced construction of the gantry and drives to handle the heavy load during drilling applications. Low backlash, precision gears, as well as highly rigid and precise rail guiding system enable the smooth motion and excellent cut quality in corners and small holes. Transversal motion range (Y axis) -- on request Longitudinal motion range (X axis) -- on request Vertical motion range (Z axis) -- 500 mm KEY FEATURES: Bedjh I Eitspfx Abbjwh ▪ Fully automated technology for program creation and execution ▪ Program based on 2D part drawing ▪ Drill / tap operations assigned to single or multiple holes with the same diameter ▪ Automatic part nesting and rapid moves between holes and parts with different strategies ▪ Automatic tool change, fully programmable, no operator intervention needed ▪ Single program zero position for the complete drill and plasma cut processing in a single program. Just as normal sheet cutting process, no special settings or procedure required from the operator ▪ Automatic measurement of distance from the drill tip to the material. No measurement by operator needed ▪ Automatic tool cooling on-off control ▪ Chip -breaking drill head motion control with programmable parameters ▪ Automatic program head control ▪ Drill head moves to safe position automatically after drilling is done ▪ Plasma head automatically moves to start of cut position, searches the plate and starts cutting ▪ Plasma head moves automatically to safe position after plasma cutting is done ▲ DRILL HEAD up to 29kW max. drill tool diameter 40mm ▲ PLASMA CUTTING EQUIPMENT HYPERTHERM -- on request ▲ INSTALLATION AND TRAINING INCLUDED Approximate installation and training period - 15 days

Condition: good (used), Year of construction: 1983, travel distance X-axis: 6,000 mm, Spindle diameter: 200 mm Machining width: 6000 mm Machining height: 3150 mm Max. machining depth: 1985 mm Slide cross section: 530 x 550 mm Table load capacity: 20 t Plate field size: 11200 x 5550 mm Tool holder: SK 60 Machine weight approx.: 173 t Additional information: - Additional equipment: large and small angular heads - Listing No.: 22979 - The table is model S20 MP, size: 2200 x 2500 mm Bwsdpfx Aeyg Htijbbeh - The machining width on the X-axis of the machine is 6000 mm - Including 6 plates measuring 5600 mm x 1850 mm

Condition: ready for operation (used), Year of construction: 2002, Available immediately ex location: Kaltenbach saw – drilling line Type KBS 750 DG plus APS 1050 Year of manufacture: 2002 3-axis drilling station equipped with NENOK coolant channel drills Infeed roller conveyor: 16 m Outfeed roller conveyor: 12.5 m Central control system renewed 2 years ago Bodpfx Aboyg Em Ujbswh Price: EUR 58,000 plus VAT, ex works

Condition: used, Year of construction: 2007, operating hours: 7,500 h, Drilling rig, drilling system on crawler chassis * Welco-Drill * Model WD 100 * Year of manufacture: 2007 * Approx. 7,500 operating hours according to the last inspection report (exact number not identifiable) * Powered by a 4-cylinder Perkins diesel engine with 97 kW / 132 HP Bodeyfk Alopfx Abbjwh * 2 travel speeds * Transport dimensions (L x W x H): 6,500 x 1,970 x 2,800 mm * Weight: 8,500 kg * Crawler undercarriage with steel track and 35–40 mm rubber pads * Track frame dimensions (L x W): 2,650 x 310 mm * Drilling crown rated load: 70 kN, drilling hoist: 9 kN * Pulling force: 65 kN, drill head: 10.6 kN * Last inspection report from 05/2023 incl. measurement results * Documentation available This description does not constitute a binding offer and may contain errors. No guarantee on the accuracy of the information provided. Please also visit our homepage.

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 16,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 2,500 rpm, feed length W-axis: 800 mm, spindle diameter: 150 mm, table load: 25,000 kg, table length: 2,000 mm, table width: 2,500 mm, The machine is in good technical condition, connected to power and can be tested. CNC control system Siemens Sinumerik 840D. Tool magazine for 80 tools, HUI 50 angular head, rotary table S 25 measuring 2000 x 2500 mm, travel 1800 mm, clamping plates 4xUD 3220x2195 mm. Bwsdpfxoyg Dfcj Abbjh