Used Temporary Structure for sale (3,248)

Condition: as good as new (ex-display), functionality: fully functional, The ibg Ring Tester Large is engineered for automated crack inspection of bearing inner and outer rings with diameters ranging from 45 to 100 mm. The system conducts a structural analysis, followed by a line-scan inspection of the raceways as well as the inner and outer diameters, utilizing the eddyvisor C. After inspection, components are automatically classified and sorted as either OK or NOK. The testing unit is mounted on a durable metal frame designed for industrial manufacturing settings, featuring integrated compartments for the steel enclosures that house the measuring equipment and PLC (including Siemens PLC). Clean, upright components are separated, fed into a transport wheel, and accelerated into rotation via belts. At the inspection station, adjustable rollers provide lateral fixation while probes perform surface defect detection; thereafter, components are automatically sorted into OK and NOK. Prior to testing, rings must be free of particles and residual liquids. The system follows ibg’s good-part-only policy, with NOK samples reserved exclusively for checking detection sensitivity during test runs. Infeed height: 1550 mm; discharge height: 1220 mm. Hedjy H Dkaepfx Agtefl For further information, please visit our website.

Condition: repair required (used), Year of construction: 1972, Manufacturer WEINGARTEN Model VK.1250.46.76 Condition Used Hfsdpfx Ajvm Eifegtjl Warehouse number cod.323 Structure Double upright Used press Thrust: 1,250 ton. Thrust points n°4 Plunger kinematics Slide stroke 762 mm. VERTICAL LIGHT from the mold holder, CBRA 1,530 mm. Slide - registration 610 mm. Mold holder surface size 4,460 x 2,400 mm. Extractable carriage n°2 lateral exit (possible mold of 5,000 mm) Mold holder surface height 400 mm. Number of strokes/min 8/18 Front useful passage 4,400 mm. Sheet metal passage in the upright 2,400 mm. Hydraulic safety Present

Condition: excellent (used), functionality: fully functional, Year of construction: 1990, 🔧 Technical Data Manufacturer: Liebherr Werk Biberach GmbH Type / Model: 28K Year of manufacture: 1990 Crane type: Bottom-slewing (tower crane) Lifting class: H1 Structural group: T2 Standards: DIN 15018 / ÖNORM B 4004 ⚙️ Description Classic, robust construction site crane Simple and proven technology Ideal for construction, industrial, or yard use Compact design – highly versatile 🏋️ Performance Maximum load capacity depending on jib length approx. 1,000 – 1,200 kg Counterweight included (chassis & slewing platform) Hjdoy Ar Iropfx Agtsfl 📌 Condition Used, condition appropriate for its age Functionality tested Inspection possible at any time

Condition: used, Year of construction: 1992, operating hours: 10,855 h, power: 92 kW (125.09 HP), Equipment: ABS, all wheel drive, cabin, Unimog 427/10 Winter Service VIN: W171477 Chassis / Attachments * Leaf suspension * Wheelbase: 2640 mm * Tires: 14.5R20 * Remaining tire tread: approx. 90/50% front, 80/50% rear * 1 diesel tank * Trailer coupling * Front and rear PTO * Front and rear hydraulic connections * Snowplow mounting kit * Raised exhaust Body * Küpper-Weisser HD, year of manufacture 1992, 1.7 m³ grit spreader body * Spreader can be parked on supports * Three-way tipper Cab / Driver's cabin * 2-seater * Roof hatch * Beacon lights Engine / Transmission * 5,958 cm³ * Manual transmission * 312,656 km Weights * Gross weight: 7,500 kg * Payload: 3,000 kg * Curb weight: 4,500 kg Miscellaneous * German vehicle * 1 previous owner New general inspections / safety inspections or load reductions/increases are available on request. We are happy to assist you in obtaining export/transfer license plates. Delivery of your purchased vehicles within Germany is also possible. Contact us! Hfsdpjwyy N Eefx Agtel We speak the following languages: German, English, and Russian! No liability for misprints, typographical errors, prior sale, or changes!—Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. With our many years of experience in reconditioning and sales of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the distribution of new and used commercial vehicles. On 11,000 m², a large selection of vehicles can be found. Our company philosophy is characterized by fairness and credibility. Because customer satisfaction is particularly important to us, we offer our clients an excellent all-around service package and provide them with a competent contact person to assist with the purchase or sale of vehicles. See for yourself! Our service for you: Loading vehicles We are happy to assist you with loading your purchased vehicles. Organizing special transports We are happy to assist you in organizing special transports. Temporary/export license plates We are happy to assist you in obtaining export/short-term license plates. Handling customs formalities We are happy to assist you with customs procedures.

Year of construction: 2018, condition: good (used), functionality: fully functional, FOR SALE: KIGO CPT-1C-3S Chemical Pre-treatment & Spray Washing Chamber For sale is a high-quality, versatile industrial chemical spray washing chamber manufactured by KIGO in 2018 (Model CPT-1C-3S). Designed for cleaning, degreasing, and surface pre-treatment of metal parts prior to coating/painting. The system handles both lighter workpieces via an overhead conveyor and heavier parts via a floor wagon. Key Features & Capabilities: 3-Stage Treatment Process: Stage 1: Degreasing (heated spray, max 50 °C, 50 kW plate heat exchanger) Stage 2: First Rinsing (heated spray, max 50 °C, 50 kW plate heat exchanger) Stage 3: Second Rinsing (ambient temperature) Flexible Workpiece Dimensions: Hsdpfezz I Trox Agtsfl Lighter Parts (Overhead Track): Max dimensions: 2,500 x 1,200 x 2,000 mm (L x W x H) Max load capacity: 300 kg Heavier Parts (Floor Wagon): Max dimensions: 1,500 x 1,000 x 1,000 mm (L x W x H) Max load capacity: 1,500 kg Automatic Distribution Wagon: Positioned beneath the chamber floor to automatically direct runoff back to the correct tank, preventing liquid cross-contamination. Pneumatic Doors: Air-operated doors seal the chamber tightly during spray cycles. Heavy-Duty Construction: Tanks and floor made of AISI 304 L stainless steel. Structural frame built with epoxy-painted steel profiles and 50 mm polyurethane insulated panels. Technical Specifications: Manufacturer: KIGO O.E. Model: CPT-1C-3S (Serial Number: 0304-29-FL/PP) Year of Manufacture: 2018 External Dimensions: 7,348 x 3,758 x 4,334 mm (L x W x H) Internal Chamber Dimensions: 3,300 x 1,900 x 2,585 mm (L x W x H) Tank Capacity: 3 x 1,000 liters Pumps: Ebara centrifugal pumps (3 units, 5.5 kW) & Lowara pumps (2 units) Exhaust Fan: Stainless steel vapor extraction fan, 5,000 m³/h capacity (1.5 kW motor) Control System: Central electrical control panel with touch screen interface (ECP-PT07), adjustable spray/drip-off cycle times, automatic refilling, and level sensors. Condition & Documentation: Professional-grade industrial unit built for easy maintenance. Includes complete operation and maintenance manuals along with pneumatic/electrical schematics.

Condition: used, functionality: fully functional, Double-deck sieve, approximately 1,200 x 2,400 mm with water spray system and piping with steel structure, platform, railings and access ladder Hodpfx Asz Az Nwjgtofl with collection tray

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 22,500 h, control type: CNC control, degree of automation: automatic, controller manufacturer: Siemens, controller model: Sinumerik 840D, laser type: CO₂ laser, laser source manufacturer: Rofin, laser source model: DC 025, laser power: 2,500 W, pipe diameter (max.): 140 mm, pipe length (max.): 8,500 mm, table length: 8,500 mm, working length: 8,500 mm, travel distance X-axis: 8,500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 95 mm, workpiece weight (max.): 4,000 kg, type of input current: three-phase, compressed air connection: 6 bar, overall weight: 10,000 kg, total length: 17,536 mm, total width: 4,604 mm, total height: 2,237 mm, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, 2006 BLM Adige LT712D Tube Laser Machine Manufacturer: BLM Adige Machine Model: LT712D Laser: Rofin Sinar series DC K 2.5kW Laser source. Year: 2006 Infeed: 8,500mm Outfeed: 6,500mm Condition: Very Good Hours: 22,500hrs Availablility: Immediately This 2006 BLM Adige LT712D is a high-performance CNC tube laser cutting system designed for precision processing of mild steel, stainless steel, and aluminium tube profiles. Known for its reliability and accuracy, the LT712D is one of the most capable mid-range tube laser platforms, delivering clean, repeatable cuts with full automation from loading to unloading. With only 22,500 operating hours, this machine is in very good condition and has been maintained to OEM standards. It offers exceptional value for fabrication companies, structural steel specialists, subcontractors and manufacturers looking for a high-precision tube laser with proven durability. ⭐ Key Machine Specifications Working Capacity & Tube Dimensions Minimum tube length: 3,200 mm Maximum tube length: 8,500 mm Round tube diameter: Ø12 – Ø140 mm Square tube: 12 – 120 mm side dimension Rectangular / flat-oval: up to 170 mm circumscribed circle, min. side 10 mm, max. side 140–150 mm Max bar weight: Linear: 15 kg/m Total (L=8500 loader): 130 kg Machine Dimensions & Weight System footprint (L=8500 version): 17,536 × 4,604 × 2,237 mm (complete system) 13,595 × 4,604 × 2,237 mm (machine body) Machine weight: approx.10000 daN (= 10 tonnes) Hedpfx Aex Ddagegtefl Laser, CNC & Automation CNC Control: Siemens Sinumerik 840D Laser Source: Rofin DC-K Series Cutting Head: Autofocus head with capacitance sensor + collision protection Working Axes: X travel: 8,500 mm Y travel: 400 mm Z travel: 95 mm A-axis: spindle rotation A1-axis: steady rest rotation V-axis: Bar support on the machining line (90mm) W-axis: Unload piece support (85mm) X1-axis: steady rest travel (610 mm) Loader & Unloader Automatic bundle loader with alignment, measuring & singularisation system Scimitar-style tube transfer system for smooth transition to machining line CNC-controlled tube support system with 5 active support groups Intelligent cut-piece unloader with conveyor belt for short parts up to 300 mm Extraction & Cooling Systems Fume extraction: 2,000 m³/hr with high-efficiency filtration system Cooling: MTA TAE 121 chiller, 260-litre cooling circuit reserve Hydraulics: 25-litre tank, 25 L/min pump, 70 bar system pressure 🟢 Condition & Availability Year: 2006 Hours: 22,500 (very low for a tube laser) Condition: Very Good – well maintained, clean, fully operational Availability: February–March 2026 Includes: Full machine, loader, unloader, chiller, documentation supplied. Why the LT712D Is a Top Choice The BLM Adige LT series is widely regarded as the benchmark for tube laser systems. This LT712D stands out thanks to: ✔ Exceptional tube cutting accuracy ✔ Reliable automatic loading & unloading ✔ High-quality Rofin laser source ✔ Full CNC control of every movement ✔ Capability to handle a wide range of profiles ✔ Heavy-duty industrial build quality (10 tonnes of rigidity) For fabricators looking to increase productivity, quality, and automation, the LT712D is an ideal investment. Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, Year of construction: 2005, functionality: fully functional, total width: 6,300 mm, total height: 2,100 mm, total length: 20,000 mm, working width: 2,600 mm, input voltage: 380 V, type of input current: three-phase, roll width: 2,600 mm, roller length: 7,600 mm, We offer this ready-to-use ICO SYSTEM reactive PUR hot melt press, model ICO SYSTEM, manufactured in 2005. ICO SYSTEM reactive PU hot melt press line – 2,600 × 7,000 mm For sale: complete industrial reactive PU hot melt press line for single-sided bonding of large sheet materials. Hsdpfxszlh Auo Agtsfl This robust production line from ICO SYSTEM International Coating GmbH has been successfully used for years by TABB Interior Systems BV for the production of high-quality laminated sheet materials. The installation is in excellent technical condition, is fully operational, and can be put into production immediately. Key features: Reactive PUR hot melt bonding Maximum panel size: 2,600 × 7,000 mm Suitable for single-sided bonding Year of manufacture: approx. 2005 Fully functional and well-maintained PLC control with touchscreen Automatic vacuum portal for precise panel positioning Throughfeed system for controlled curing and constant pressing force Roller conveyors and transport tables included Suitable for: The installation is suitable for bonding a variety of flat sheet materials, including: plywood MDF HDF particleboard HPL composite panels aluminum and steel sheets various other industrial sheet materials. Production process The line is designed for an efficient and reproducible production process: positioning of the bottom sheet application of reactive PUR hot melt automatic placement of the top sheet using a vacuum portal passage through the heated press controlled curing and output of the finished product. Thanks to the automatic handling, large panels are produced quickly, accurately, and with consistent adhesive quality. Scope of supply The complete installation includes, among other things: ICO SYSTEM heated throughfeed system automatic vacuum portal with suction cups conveyor belts and roller conveyors control cabinet with PLC/HMI complete steel structure and handling. Condition The machine is fully operational, is still in use in production, and is available only due to a change in the production process. Inspection while running is possible by appointment. Interested? Please contact us for additional information, technical specifications, a demonstration, or an inspection. This high-quality industrial press line is ideally suited for companies that want to efficiently bond large sheet materials with a high-quality PUR hot melt bond.

Condition: used, Year of construction: 2013, .30 Base machine ACCORD 30 FX N. 1 CONCEPTCNC machining center with a moving gantry and a fixed worktable for processing various sheet-like materials: chipboard, MDF, laminated solid wood, plastic materials, and light alloys. STRUCTUREThe machine is developed using the best three-dimensional CAD systems for solid modeling. The machine bed and moving crossbeam represent the two main elements of the machine structure and are manufactured in the company's own foundry. All mechanical machining operations are carried out on special production equipment in a single setup to ensure optimal precision and to minimize tolerances during machining. The control cabinet is mounted directly on the machine bed, allowing for a very compact design and easy access. CONTROL UNITThe control unit consists of an industrial NC control system with an integrated office PC (desktop computer). The CNC solution with an office PC combines all the features of numerical control with the typical user-friendliness of an office PC, which greatly simplifies the control of the machine by enabling the use of the XILOG MAESTRO user interface, i.e., the software developed by SCM for simple and fast programming, even for non-experts. GENERAL FEATURESPassage height: - 250 mm with H50 accessories- 190 mm with H110 accessoriesPendulum machiningAutomatic lubrication of the axesAir conditioning system to maintain the correct internal temperature in the control cabinet. Software for remote customer serviceOperator interface Xilog MAESTRO with integrated CAD/CAM, which allows for the extremely simple execution of products even with special shapes.A number of advanced functions allow for: - programming via macros- creating and managing subprograms- optimizing machining- managing all machine functions- creating and managing a database of tools93.07.31 Voltage 400 EU 93.12.01 Frequency 50 Hz R0.00.03 LINGUA P.C. GERMAN 02.12.57 ACCORD 30 FX - Worktable X-Y = 3680x1380 56.05.25 No. 6 Support rail MATIC - L1300 The worktable is equipped with: - no. 2 lateral fixed supports- no. 6 aluminum supports, motor-driven and movable along the X-axis- motorized conveyor belt for unloading chipsEach movable support has: - no. 3 motor-driven support rails for clamping cylinders and vacuum suction cups- air blower for cleaning on each movable support- pneumatic locking/release for quick replacement of the clamping cylinders and vacuum suction cups- preparation for lifting devices- preparation for reference stopsThe workpiece vacuum clamping system is divided into 2 independent worktables.23.02.19 DUO Prisma K working unitThe working unit with 5 interpolating axes is located on the moving crossbeam, which provides maximum stability during milling and thus also ensures optimal machining quality of the workpieces, even with high material removal rates. It allows for rotation around the axes arranged at 50° to each other and has many advantages over traditional 5-axis working units, such as: - the full use of the work areas both with 5 axes and with a vertical spindle- spindle external dimensions outside the working area- a particularly light design for horizontal machiningThe unit has a central chip extraction system. Hodpfxozl Ap Nj Agtofl

Condition: ready for operation (used), Year of construction: 2012, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: 4033, overall weight: 800 kg, type of input current: AC, input voltage: 220 V, total width: 1,000 mm, total length: 10,000 mm, total height: 1,200 mm, Pitney Bowes Vantage Sorting System designed for high-volume mail processing, document handling and sorting operations. The system is engineered to scan, image and sort large volumes of mail using automated OCR, configurable sorting bins and piece-level tracking. This is a comprehensive industrial sorting system comprising eight sorting sections, multiple sorting bins, operator control panels and monitoring equipment. Information displayed on-site indicates a processing capacity of approximately 45,000 mail pieces per hour and approximately 30 million pieces annually. Depending on the configuration, the available specifications indicate maximum processing speeds of up to 46,300 No. 10 envelopes per hour or up to 50,000 postcards per hour. Manufacturer: Pitney Bowes / BlueCrest Model: STV1 Year: 2012 Product line: Vantage Sorting System Equipment type: Automated letter and mail sorting system Construction: Metal structure New one around 1,5 m. Euros Hfjdpfxozxbgao Agtol Requests for proposals.

Condition: used, functionality: fully functional, Year of construction: 2005, color: red, overall weight: 16,000 kg, maximum load weight: 13,000 kg, empty load weight: 3,000 kg, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,460 mm, machine/vehicle number: 04851, BDF Steel Swap Body / Swap Container 7.45 m with Roller Shutter * Swap container / steel box with profiled external walls * Craneable and stackable * Aluminum roller shutter – fully refurbished * Keyhole rails * Laminated plywood floor, suitable for forklift traffic * Forklift pockets and upper corner fittings * Support legs not height-adjustable * Parking height: 1.32 m * Internal loading height at roller shutter: 2.20 m * Technically in very good condition Rental from just 1 day, long-term rental possible! We always have larger quantities from various manufacturers and in different versions available for sale or rental! Hjdpfewtqt Isx Agtjfl Delivery possible throughout Germany!

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: Custom made, type of input current: three-phase, total width: 1,800 mm, total length: 14,650 mm, input voltage: 400 V, input current: 16 A, cutting width (max.): 1,800 mm, 22 C – Finn-Convey Industrial Spreading Line (14.65 m x 1.8 m) – Complete with Air-Flotation Description For sale is a professional-grade Finn-Convey industrial fabric spreading and cutting table line, offered as a complete production-ready system. This system is designed for efficient fabric spreading and preparation in high-volume cutting room operations. It enables controlled handling of heavy fabric rolls, precise layer alignment, and smooth material flow prior to cutting. The line has been operated as part of a dedicated production setup together with a Bergman cross cutting saw (unit 114 A). This combination allows efficient pre-cutting of fabric rolls into required lengths before spreading, significantly improving workflow efficiency and reducing manual handling. The equipment has been used in a professional garment factory and was operational prior to factory shutdown. Key Technical Specifications • Total length: 14.65 meters (modular structure, adjustable configuration) • Table width: 1.80 meters (suitable for wide fabrics) • Technology: Air-flotation table system for low-friction material handling • Drive system: Motorized side drive units ensuring controlled spreading tension System Components • Finn-Convey motorized side drive units • Industrial air-flotation table structure with perforated surface Hfodpfxsy Au Ale Agtjl • Integrated blower system with centrifugal fans under tables • Electrical control cabinet for system operation • Fabric roll handling stands and support assemblies • Integrated end cutting unit with circular blade system Cutting Unit Technical Details • AC speed-controlled motor (Taili Motor Co., Ltd., approx. 90–200W range)14650 • Gear reduction unit (e.g. 5GN-series) for high torque output • Circular cutting blade with integrated sharpening mechanism • Adjustable vertical guide rails for cutting height positioning • Designed for efficient cutting of multi-layer fabric stacks Auxiliary Drive Components • Auxiliary induction motor (e.g. 40W class, speed-controlled) for fine positioning and movement control • Gear-driven transmission for stable and continuous operation • External capacitor-based start system (typical for single-phase auxiliary motors) System Architecture • Modular table construction allowing flexible layout adjustments • Air-assisted material movement reducing friction and operator effort • Cradle-type roll handling enabling tension-free fabric feeding • Encoder-based or mechanical length control depending on configuration • Compatible with upstream roll cutting equipment and manual or semi-automatic workflows Production Advantages • High efficiency with long cutting layouts and reduced material waste • Excellent ergonomics, heavy fabric stacks can be moved with minimal force • Accurate layer alignment supported by controlled drive system • Integrated cutting capability improves workflow continuity • Suitable for a wide range of materials including denim, upholstery, and technical textiles Condition Used industrial condition Removed directly from production after factory shutdown Typical signs of use from industrial environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Location Valga, Estonia Removal & Transport Buyer responsible for dismantling, loading, and transport Professional dismantling strongly recommended due to system size and electrical installation

Condition: ready for operation (used), functionality: fully functional, 2 conveyor belts + bagging system in good condition. Industrial conveying and feeding system AP Maschinenbau SL 4 S – fully functional For sale is a robust industrial conveying and feeding system from AP Maschinenbau GmbH, Magdeburg, manufactured in 1995. The system consists of a large storage/feed hopper with a supporting structure, as well as several conveyor belts, and is suitable for the transport and feeding of bulk and piece goods. Technical data: * Manufacturer: AP Maschinenbau GmbH, Magdeburg * Type: SL 4 S * Factory No.: 172 * Year of manufacture: 1995 * Equipment No.: 7029 * Several conveyor belts * Robust steel construction * Electric drives * Motor power: 1.1 kW * Motor: Dutch Motors * Type: M2 90L6 * 400 V / 50 Hz * 910 rpm * Protection class IP55 Condition and function The system is in used condition, commensurate with its age, and shows corresponding signs of wear and tear, as well as rust and paint chipping. The system is fully functional. A functional test is expressly possible during an on-site inspection. Interested parties can therefore verify the condition and function of the system themselves before purchasing. The system is sold in its current condition. Inspection and functional test possible after prior appointment. Interesting for: * Recycling and processing companies * Construction material and bulk goods processing * Agriculture Hfsdpezy Suqofx Agtjl * Industrial and production companies * Machine builders * Recovery of spare parts or conversion

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 69,000 mm, total width: 16,000 mm, total height: 16,000 mm, The system was designed according to Eurocode EN 1993 for the industrial drying of wood chips, sawdust, or similar biomass products and is suitable for use in biomass, wood, or pellet production. Process components: Air heater, deflection rollers, feed modules, discharge modules, trough chain conveyor, belt tensioning and adjustment device, 7 exhaust stacks (height up to approx. 17.6 m) Designed for hot air or waste heat utilization (e.g., biomass boiler or CHP plant), heat requirement 10,270 kW th, installed electrical power 690 kW el. The inlet temperature in the dryer is 68°C, the outlet temperature is 42°C, and the heat transfer medium is a water/glycol mixture. The volume flow at the dryer outlet is 1,081,000 m³/h. Dust emission value 5 mg/Nm³ (moist), sound pressure at a distance of 1 m 85 dB(A) from the opening of the exhaust duct and the dryer. The dryer is designed for an outside temperature down to -40°C, the conveying capacity is at least 70 m³/h and a maximum of 250 m³/h with a bulk density of 260 kg/m³. The working platform of the dryer is located on approximately 8.00 m high steel supports and is enclosed with thermally insulating sandwich panels. A hall or other production components can be inserted under and between the supports (see under Documents, Steel Structure). Hodpfx Aezw Apgegtsfl The system has been disassembled and stored by an experienced assembly team, and this team can be arranged for transport and reassembly. Please note: We are selling exclusively this belt dryer and no other parts! Please direct your inquiries via WhatsApp to Mr. Sörgel; he is on-site at the factory and may not always be available by phone. Thank you very much!

Condition: used, Year of construction: 2006, functionality: fully functional, air demand: 4,000 m³/h, pressure: 5 bar, operating pressure: 7 bar, inner dimension width: 900 mm, workpiece weight (max.): 1,000 kg, filter area: 120 m², input voltage: 380 V, working range: 1,400 mm, tank capacity: 960 l, suction capacity: 4,000 m³/h, Equipment: cabin, documentation/manual, Automatic hook-type shot blasting system complete with monorail overhead conveyor, abrasive recovery system, bucket elevator, pneumatic shot selector, vibrating screen, dust collection filter, and control panel. Main features: Maximum workpiece diameter: 900 mm Maximum workpiece height: 1,400 mm Maximum load weight: 1,000 kg Hjdpfxjzdqtms Agtsfl No. 6 hook holders No. 4 Carlo Banfi X1 centrifugal turbines Turbine power: 4 x 7.5 kW Abrasive flow rate: 300 – 360 kg/min Abrasive capacity (initial charge): 960 kg Power supply: 380 V three-phase – 50 Hz Total installed power: approximately 22 kW Carlo Banfi PS-6B dust collection filter included: Air flow rate: 4,000 m³/h Filter area: 120 m² No. 6 microfibre filter cartridges 4 kW suction fan Automatic cartridge cleaning system with compressed air Required compressed air pressure: 5 – 7 bar System suitable for shot blasting and surface cleaning of castings, metal structures, mechanical components, stamped parts, and steel products. Machine complete with shot recovery and recycling system, electrical panel, and original technical documentation. Includes spare parts, including motors and parts for the blasting chamber. Video of the machine in operation available upon request. Another identical shot blasting machine is available.

Condition: used, Year of construction: 2008, functionality: fully functional, total height: 2,100 mm, total length: 1,800 mm, total width: 1,000 mm, type of input current: three-phase, overall weight: 255 kg, table load: 200 kg, input voltage: 400 V, A down-draft table combines a workbench with an exhaust/filtration system. Fumes and dust are extracted through the tabletop and rear panel and filtered by filters mounted in the table structure. The table can be placed anywhere, at any welding or grinding station. A three-stage spark separator enhances safety and meets the most stringent international guidelines for fumes and dust. DraftMax Advance features a manually operated filter cleaning mechanism activated by a button. In addition, the DraftMax Ultra model can be equipped with an automatic start/stop device, which provides even easier operation. This is an ideal table for very intensive welding or grinding applications. Work surface dimensions: 1366 mm x 750 mm Weight: 255 kg Hodpfx Aszukv Nogtjfl Noise level: 67 dB (version with silencer and HEPA filter) Supply voltage: 400 V/3~/50 Hz Motor power: 2.2 kW Capacity: 2500 m³/h Filtration area: 2 x 26 m² Filtration efficiency: >99.9% (filter class: M) HEPA filter (required for stainless steel welding) Noise silencer Stock number: 1151

Condition: used, Year of construction: 2023, Special price – Showroom machine Garbsen INDUSTRIAL AUTOMATIC EDGE BANDING MACHINE stefani md (the images of the machine are not binding with regard to the actual features specified below) KEY FEATURES EDGE BANDING OF SOLID WOOD UP TO 15 MM THICKNESS: SIMPLE AND FUNCTIONAL PROCESSING OF EDGES WITH LARGE DIMENSIONS "SGP" GLUE TANK: USE OF EVA AND POLYURETHANE GLUE FOR A PERFECT GLUE JOINT "STARTOUCH" CONTROL: A TOUCH IS ALL IT TAKES TO OPERATE THE MACHINE GENERAL FEATURES Automatic single-sided edge banding machine for applying edge banding with hot melt adhesive to the four sides of straight panels and for subsequent finishing. Machine frame and longitudinal supports made of cold-rolled steel in a box construction, manufactured in a single element, for high rigidity and vibration-free operation to accommodate the working units. Openings with slides for discharging any remaining chips to the floor. Upper pressure beam made of thick-walled steel construction and with columns made of cast iron, for a vibration-free structure where the working units are attached. Pressure rollers on the feed chain in a double row, made of rubber with a high coefficient of friction and with sliding on bearing rollers. Device to protect the pressure rollers from any remaining chips. Electronic adjustment of the upper pressure unit, depending on the panel thickness. Upper working units attached to the pressure beam or mechanically connected to ensure automatic adjustment when changing the panel thickness. Lower working units attached to the machine frame or to the longitudinal support, for a precise reference to the panel. All high-frequency motors are operated via frequency inverters. Protective cover for all units positioned after the gluing unit. Windows made of polycarbonate ensure a good view of the units during processing. Interior lighting of the cabinet. Protective cover with sound-absorbing material for lower noise emissions during processing. The spacer on the infeed guide allows the machine to be fed in the correct spacing. The spacing is automatically adjusted to the selected feed speed. Extraction nozzle arranged on the soundproof hood. Swivel control panel in an ergonomic position at the machine infeed. The electrical system complies with current regulations. Electrical components housed in a metal housing, attached to the machine frame and provided with doors for convenient access during any maintenance work. Panel feed The panel feed is carried out via a feed chain consisting of rubber sliding blocks with a high coefficient of friction, attached to a 1-1/4" industrial chain. The chain slides on 2 guides made of hardened and ground steel, a round guide and a flat guide, to guarantee a straight feed and protect against lateral displacement. Automatic lubrication of the chain. The amount of lubricating oil is optimized by the control system depending on the panels being processed. Support roller track externally and positioned along the entire length of the machine; consisting of an extendable opening system with sliding on linear bearings and plastic sliding rollers with steel pivot pins. "STARTOUCH" CONTROL Main features: 12" touchscreen color display Graphical representation of all processing units and their status (on/off) Hedpfx Aszc Ilxegtefl

Condition: excellent (used), total length: 6,000 mm, total width: 2,400 mm, total height: 670 mm, OPTIONALLY ALSO AVAILABLE WITH ROOF STRUCTURE! Operating Conditions: The trailer is designed for use on flat, paved surfaces in internal company transport. Hfsdpoxrtdqsfx Agtjl Combined Operation: The trailer components are not (without a trailer coupling) designed for combined operation with multiple trailers. Payload: 16 t at 6 km/h with evenly distributed loading (area load) of the loading platform between the axles. Point or line loads are only permitted upon notification. Loading Platform: Approx. 6000 x 2400 mm, loading height approx. 670 mm, platform covering made of softwood planks, all-round edge protection. Steering: Four-wheel stub-axle steering, drawbar tiltable, removable, and can be repositioned from front to back, coupling height at the towing vehicle approx. 320 mm (other coupling heights only permitted upon notification), towing eye according to DIN 74054, diameter 40 mm, drawbar drop protection according to UVV. Chassis: Both axles steered, solid rubber elastic tyres approx. 425 x 300 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paintwork: Topcoat RAL 5002 Ultramarine Blue. Optional Equipment: - 2 lashing rods made of round steel welded vertically into the outer frame on each long side - Double-acting wheel chock with holder and chain

Condition: ready for operation (used), Year of construction: 2014, operating hours: 1,174 h, product length (max.): 4,770 mm, This HOMAG KDF 230 edgebander was manufactured in 2014. It has processed a total of 65,428 workpieces and 108,908.92 meters of edge length. The machine features a digital touchscreen control panel and a multi-flexible overhead dust extraction system. If you are looking to get high-quality edgebanding capabilities, consider the HOMAG KDF 230 machine we have for sale. Contact us for further details. - Total Operating Hours: 1174:30.12 h- Total Workpieces Processed: 65,428 Stck- Total Edge Length Processed: 108,908.92 m- Application Unit Temperature: 190 °C (Target), 76 °C (Actual)- Feed Speed: 11 m/min- Working Height: 950 mm- Pneumatic Connection: min. 6 bar- Overall Machine Length: 4,770 mm- Workpiece Width min.: 70 mm (at 8-22 mm thickness), 120 mm (at 23-40 mm thickness), 150 mm (at 41-60 mm thickness)- Workpiece Overhang: 38 mm- Workpiece Thickness: 8 - 60 mm- Edge Material Roll: 0.4 - 3 mm (max. cross section 135 mm² for PVC, 100 mm² for veneer, roll diameter max. 830 mm)- Edge Material Strip: 0.4 - 6 mm (max. cross section 165 mm²)- Control System: EasyTouch 2- Operating Voltage: 400 V / 3Ph / 50Hz- Joint Trimming Unit: 2 x 2.2 kW, 200 Hz with DIA cutter set (100 x 65 x 30 mm, Z=3, max. workpiece thickness 60 mm)- Gluing Unit: Standard A6 with workpiece pre-heater and quick-change application unit (suitable for Granulate / PU)- End Trimming Unit: 2 x 0.18 kW, 200 Hz, 12,000 rpm (swivel range 0-15 degrees) with pneumatic adjustment- Fine Trimming Unit: 2 x 0.27 kW, 200 Hz, 12,000 rpm with pneumatic adjustment (chamfer/radius/straight), DFC combination cutters, and multi-roller sensing - Corner Rounding / Form Trimming Unit: 1 x 0.35 kW, 200 Hz, 12,000 rpm (max. edge thickness 3 mm, max. workpiece thickness 60 mm, min. workpiece length 250 mm) with structural floor attachment- Profile Scraper Unit: Quick-change heads, pneumatic adjustment, and special multi-roller sensing- Glue Joint Scraper Unit: Included with top/bottom tracing and dust extraction- Buffing Unit: 2 motors x 0.09 kW, tilt and height adjustable- Pressure Line: Smooth PU top pressure rollers- Additional Features: Hood internal lighting, feed fence extension (+300 mm), automatic edge infeed (KDX 1210/1400) Hodpfezzwhfsx Agtjfl Technical Specification Feed Speed 11 m/min

Condition: excellent (used), Year of construction: 2017, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 2017.041.XM.400.004, space requirement length: 6,700 mm, space requirement width: 3,200 mm, space requirement height: 5,000 mm, This is a combination of a hot mixer and a cooler. A typical application is mixing polymers with additives. Hot mixer: working volume of 400 liters, drive power 90 kW, mixing impeller with a tip speed of up to 60 m/s. Vacuum system included (but needs optimization). Filling hopper included. Gravimetric scales for the additives are not included in the delivery. Cooling mixer, volume 1200 liters with a 11 kW drive, cooling jacket for cold water flushing, outlet with a valve. Hfedpfxszl Td Rs Agtel The combination includes the entire steel structure with walkways, control cabinet with frequency converter (400 VAC/50Hz) for the variable drive of the hot mixer. Additional documents can be provided upon request. The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is quoted without packaging on a pallet.

Condition: excellent (used), functionality: fully functional, working width: 300 mm, brushing unit diameter: 240 mm, total length: 3,600 mm, total width: 1,000 mm, total height: 900 mm, height adjustment type: electric, overall weight: 400 kg, working height: 100 mm, workpiece height (max.): 100 mm, workpiece width (max.): 300 mm, workpiece length (max.): 3,600 mm, WOOD AGING BRUSHING MACHINE | 4 BRUSHES | 300 MM Sanding machine for aged wood JBS MACHINERY PROCHERA! Hfedpszxz T Tefx Agtjl Professional PROCHERA brushing/sanding machine designed for structuring, brushing, and aging wood. The machine features 4 independent brushing units and a conveyor belt with adjustable feed speed. It is a robust industrial design intended for continuous processing of wooden components. This brushing machine is ideal for producing aged boards, wooden flooring, facades, countertops, decorative elements, paneling, and other products requiring the enhancement of the natural wood grain. TECHNICAL DATA - Manufacturer: PROCHERA - Type: brushing/sanding machine for wood structuring - Number of working units: 4 - Number of brushes: 4 - diameter 240mm - Maximum working width: 300 mm - Maximum height of workpiece: 100 mm - Feed speed: 0–23 m/min - Conveyor: belt type - Feed speed adjustment: stepless - Adjustment of working units: independent - Brush working direction: option for co-rotating/counter-rotating operation Gross price including VAT margin or 23% VAT invoice PROCHERA uses various types of brushes in these machines, allowing for both delicate and deep surface structuring. The first units can be equipped with metal brushes for more aggressive grain exposure, and subsequent units can use abrasive brushes for further processing and surface smoothing. The machine is primarily intended for: wood brushing, surface structuring, wood aging, exposing the natural grain pattern, surface preparation before oiling, wood preparation before waxing or varnishing, production of flooring boards, production of facade boards, production of countertops and decorative elements, processing of solid wood. Thanks to the four working units, it is possible to achieve multi-stage surface processing – from a strong opening of the wood structure to its further smoothing and finishing. WHY IS IT WORTH IT? This is a professional machine for companies involved in the production of aged boards, flooring, facades, countertops, and wooden decorative elements. Four working units allow for significantly greater flexibility compared to simple single-unit brushing machines. Adjustable feed allows for the selection of operating parameters for a specific material and desired effect. The machine is ready for further operation. Possibility to view the machine and test its operation after prior contact. JBS MACHINERY JBS MACHINERY GROUP Sp. z o.o. New and used woodworking machines Professional wood processing equipment Possibility to arrange transport in Poland and Europe. We invite you to contact us regarding price, additional photos, a video of the machine in operation, and details regarding transport.

Condition: used, mileage: 126,961 km, power: 70 kW (95.17 HP), first registration: 04/2011, fuel type: diesel, empty load weight: 2,550 kg, maximum load weight: 950 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 4,325 mm, next inspection (TÜV): 04/2027, fuel: diesel, CO₂ emissions: 259 g/km, fuel consumption (urban): 11.1 l/100km, fuel consumption (extra-urban): 9.2 l/100km, fuel consumption (combined): 9.8 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 7,057 mm, loading space length: 4,380 mm, loading space width: 2,000 mm, loading space height: 2,000 mm, Year of construction: 2011, construction height: 2,690 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, traction control, The Mercedes-Benz Sprinter 310 CDI Maxi Euro-5 is a spacious panel van with yellow paintwork and a well-thought-out design. First registered on April 18, 2011, it has a mileage of 126,961 km and offers comfortable handling thanks to its automatic transmission and rear-wheel drive. Equipped with a 2,143 cc diesel engine delivering 70 kW (95 hp), it meets the Euro 5 emissions standard. The Sprinter has a maximum payload of up to 3,500 kg and benefits from a continuous, well-structured cargo space with practical shelving and a rear-view camera. Hedpfx Agey N Enfotsfl With a combined fuel consumption of 9.8 l/100 km and CO2 emissions of 259 g/km, the Sprinter is environmentally friendly and carries the green environmental badge (Class 4). The vehicle stands 2,694 mm high, 2,100 mm wide, and 7,057 mm long, providing ample space for various freight requirements. Well-maintained and notable for its reliability and low maintenance requirements, it offers an ideal transport solution for commercial users. Special advantage: The Sprinter comes with valid roadworthiness (TÜV) until April 2027 and has had only one previous owner. With its practical equipment and adaptable cargo solutions, it remains a popular choice for diverse business applications, enabling efficient transport of goods and materials. Sale only to commercial customers (agriculture, freelancers, small and large businesses) or for export. Subject to prior sale and errors.

Condition: used, Year of construction: 2021, Overview This Robopac Helix 4 EVO pallet winder was built in 2021, with less than 500 operating hours - technically close to new. The arm carries the pre-stretch carriage around the stationary pallet, so the load itself is never turned - the configuration for unstable, fragile or heavy loads at high output (capacity below). Built as a stand-alone unit. Technical data Hodpfxjzzz Rdo Agtofl - Manufacturer: Robopac - Model: Helix 4 EVO - Year of manufacture: 2021 - Machine type: automatic rotating-arm stretch wrapper (pallet winder) - Operating hours: less than 500 h - Capacity: 82 pallets/h (11 wraps, 1,000 mm H), 73 (15 wraps, 1,600 mm H), 64 (19 wraps, 2,000 mm H) - Wrapping cycle time: approx. 36.3 s at H 1,600 mm, 15 wraps (conveyor excluded) - Pallet sizes: 800 x 1,200 mm and 800 x 600 mm, centred on the conveyor - Load height: 1,000 - 2,000 mm incl. pallet; mechanical max. 2,550 mm incl. pallet and conveyor - Load weight: 100 - 1,200 kg - Conveyor speed: 15 m/min - Machine height: 4,721 mm; hall height from 7,000 mm - Pre-stretch: PGSA carriage, electronically adjustable 100 - 400 % - Stretch film: LDPE / LLDPE, 17 - 23 µm, roll width 500 mm, max. dia. 250 mm, core 76 mm, max. weight 16 kg - Control: Siemens SIMATIC S7-1500 PLC, TP700 7" colour touch panel - Wrapping programs: 15, expandable to 64, 12 control steps per recipe, 4 password-protected access levels - Power supply: 400 V / 50 Hz, TN-S, control voltage 24 VDC - Compressed air: 6 bar, dry and oil-free - Documentation and HMI languages: German / English / Italian Equipment - Rotating arm on a four-column steel structure, geared slewing ring with central lubrication - Patented PGSA pre-stretch carriage with load cell, film tension corrected at the corners, set from the display - Automatic film clamping, cutting and impulse-sealing unit, spring gripper with 300 mm horizontal stroke - Easy Lock tilting roller and roping device for narrowing the film web from below - Pantograph top press unit for load stabilisation during wrapping - Photocell for automatic pallet-height reading - Integrated roller conveyor, pallets loaded and unloaded by forklift - SEW IP55 geared motors for arm rotation and carriage lift, FESTO pneumatic components - Glazed enclosure with Sick M4000 light curtains, 30 mm resolution, 1,800 mm field height - Enlarged illuminated switch cabinet and a separate, independent operator panel - TPM package: centralised lubrication points, gauges with red/green rings, maintenance intervals on the display - Troubleshooting in the HMI with fault location and remedy - R-Connect remote connectivity with cloud portal for production data and teleservice - Documentation printed and on USB: manual, CE declaration, diagrams, spare parts catalogue, layout Condition Used - virtually new, dismantled and professionally packed for transport; photographs show it assembled before dismantling. Sold without warranty. Availability Immediately. Location: Germany. Handed over dismantled and packed (EXW).

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, cutting height (max.): 50 mm, cutting width (max.): 3,300 mm, saw blade diameter: 300 mm, Equipment: documentation/manual, type plate available, For sale: SIGMA PRIMA 50 panel saw (2016) with label printer – precision, power, and reliability in one! We offer a professional Sigma Prima 50 panel saw from 2016 – an ideal solution for carpentry workshops, furniture factories, and companies involved in the production of wood-based panel components. Why choose it? 1. Highest level of cutting precision – a stable structure and high-quality guides guarantee perfectly straight and repeatable cuts. 2. Powerful and efficient motor – easily handles MDF, particleboard, laminate, or solid wood. Hodpfx Aszqc E Iogtjfl 3. Large panel table – comfortable processing even of large-format panels. 4. Scoring saw – perfect edge finishing without chipping. 5. Year of manufacture 2016 – modern design, proven and ready for work. 6. Connected label printer, ensuring that each component is accurately labeled, preventing errors during assembly. Ideal for: 1. Production of custom-made furniture 2. Serial processing of panels 3. Companies producing prefabricated houses 4. Precision carpentry work 5. Businesses that value quality and efficiency The machine is in good working order, robust, durable, and designed for intensive use. It is an investment that will quickly pay for itself thanks to increased efficiency and accuracy. Contact us for more information, photos, or to arrange a viewing. Don't miss this opportunity – a professional panel saw in very good condition is a guarantee of quality for years to come! We purchased a new model, so this one is being sold. Price: 96,500 PLN net Tel. 666-609-957

Condition: excellent (used), Year of construction: 2018, operating hours: 9,219 h, functionality: fully functional, machine/vehicle number: 2730218, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,700 mm, travel distance Z-axis: 1,500 mm, controller manufacturer: Heidenhaim, controller model: HAIDENAIN TNC 530 HSC, total height: 4,070 mm, total length: 6,800 mm, total width: 6,500 mm, table width: 1,300 mm, table length: 1,800 mm, table load: 6,000 kg, overall weight: 19,000 kg, spindle speed (max.): 3,500 rpm, operating hours of spindle: 9,219 h, number of slots in tool magazine: 32, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, MACHINE FEATURES Model: RTX 25 TG130 Serial Number: 2730218 RTX Series Features Structure: Fixed bed and moving column. Movements: Longitudinal table and transverse column with constant support. Rotary Table: Replaces the fixed rectangular version for continuous machining operations. Head: Bi-rotational head as standard for maximum flexibility. Type: Universal milling machine with fixed bed. Applications: Precision mechanical machining and complex profiles. Construction: Designed and assembled in Turin by Goglio Milling Systems. Travels Longitudinal Travel (X-axis) 2500 RCV UL1007 Hfedpfxsyn Rduo Agtel Transverse Travel (Y-axis) 1700 RCV UL1007 Vertical Travel (Z-axis) 1500 RCV UL0714 Rotary Table TG-130_1300x1800 Spindle Motor Power 24 kW Maximum Spindle Speed 3500 rpm Rapid Traverse Rate X-axis (CNC) 15,000 mm/min Rapid Traverse Rate Y-Z axis (CNC) 15,000 mm/min Rapid Traverse Rate Axes (Manual) 6,000 mm/min Working Feed Rate (CNC) 10,000 mm/min Working Feed Rate (Manual) 2,500 mm/min Continuous Torque Motors X-Y Axis 36 Nm Continuous Torque Motors Z Axis 36 Nm Tool Holder Electro-hydraulic Spindle Taper ISO 50, Tool Drawbar BIR 200 Maximum Permissible Load on the Table 6,000 kg Bi-rotational Head Continuous for B-axis 0 - 360° Module Rotary Table Coupled to Hydraulic Rotating C-axis 0 - 360° continuous Machine Chiller Yes Tool Magazine 32 Positions Operating Temperature 10-40 degrees C Base Machine Mass 19000 Kg CNC HEIDENHAIN TNC 530 HSCI